Monster Sized 3D Prints - Elegoo OrangeStorm Giga!

[@UncleJessy]

I cant wait to get this rancor head painted & mounted! Let me know what I should print with this!

[@BlueKnifeGtag]

Red

[@TejaSays]

ok.. now I want a small 3D printer from you uncle 😡😡😤

[@gunnarbeddoes13]

A huge Mario and Luigi statue

[@leesmithsworkshop]

Full size Slimer from ghostbusters.

[@thatunprofessionalpanda3862]

thats so awesome, make dark helmets helmet, you can probably do it all in one shot full size now!!!

[@roryregina]

You should print a Spaceballs Lord Helmet helmet...

[@UncleJessy]

😂

[@Coolrogers90]

absolutely 🤣

[@gaveintothedarkness]

SPACEBALLS: The reply

[@PERSISTENTxMF]

Yes!!! 😂

[@hardnine]

Terrible idea worst movie

[@muzzynat]

As someone who backed the Elegoo Jupiter mostly based on Jesse's hype, and ended up with what's basically a beta test unit, I plead to those of you reading this- wait until the second revision at minimum.

[@UncleJessy]

The good news is they should hopefully have a firmware update available soon for me to test that will hopefully resolve some of the things I’ve called out here 🤞🤞

[@minifig404]

@@UncleJessy Would love to see a follow-up if that happens.

[@hotshoestudios]

Add my Neptune 4 Max to that as well. Total POS.

[@design9639]

Could you please elaborate on the major issue/s you had with it.

[@Leoriic]

​@hotshoestudios it's Great machine neptune 4 max. Mines been running 20 hours a day since January 15th and no major issues just occasional Littles ones like bed leveling when I haven't done it in over a week and sometimes having to change to a new nozzle gone through 2 nozzles so it's not that bad.

[@lajoyalobos2009]

Should I buy an office chair or an Elegoo printer? Nah, I'll buy the Elegoo and then I can print myself a full sized chair!!

[@UncleJessy]

Heck yeah! I want to print my Escape Key stool I designed… but huge 😂

[@markmorgan8378]

ESC key why not the whole keyboard. Ha

[@Immersivedimesion]

Elegoo printer is better option. Are you open to suggestions on your social media page?

[@typeaboutit]

Now you can actually go boating with the family in your benchy!

[@radovanbucko4973]

i hope you finaly finish that magneto statue! now you have perfect printer for that

[@UncleJessy]

👀🤘

[@astrophysicistguy]

I've started the pre planning for a 3D printed life sized Master Chief followed by a life sized Arbiter so this could be huge if they ever get it working full up ...

[@SpectraV3i]

Print and Paint- Jaba The Hut

[@Atomic-Purple-Guy]

Nah pizza the hut

[@Ojref1]

After my experience with the Neptune 4 series firmware, I don't have any desire to purchase any more of their printer products until they can demonstrate that they have better quality control and mastery over Klipper. Neptune 4 users have been depending on the efforts of a few individuals doing open source Klipper.

[@FunctionalPrintFriday]

I wonder if the beds are moving around until heat soaked like I discovered on the N4M. That could be why the values are changing.

[@GreenEyedGuardian_]

A failed print would be DEVASTATING!

[@tasmaniakguitars]

Oh man, any large print is anxiety inducing. I work with BigRep printers and prints running for 5-6 weeks is not uncommon... I don't sleep much when I have those running. 😂

[@thestagelightingguy]

Especially if it is a massive print that could consume tons of filament

[@Peacehawk0911]

Need to do Castle greyskull. That would be awesome.

[@arkurianstormblade4109]

I'm waiting on the v2 or v3 of this printer after they worked on all the kinks, but man it does look pretty cool.

[@fakumadda1632]

You're kidding, right? The NM4 is a piece of trash and you think they can perfect this monster.🤣🤣🤣🤣🤣

[@devinstewart4787]

Yea like fakuma said , 3max > 4max

[@joep9912]

That Dune print is great. Being able to print our own decorations around the house and for the kids will be awesome.

[@phreshxmetal]

I appreciate the transparency with mentioning that this isn't a review. Love your content thank you

[@supertedogpriken]

Holy f... This is AMAZING. With a printbed that big you could make complete dirt bike plastics. or even atv/quad plastics. Making both custom ones, or just ones you cant buy anymore. AMAZING.

[@TheSmugglersRoom]

That Rancor is outstanding! Crazy printing, can’t wait to see what else you try out!

[@BennyTygohome]

That is ridiculously huge. It's perfect for cosplay costuming and such. That monster head is awesome. It looks like a nightmare to adjust. Even just cleaning the bed plates, I'd have to worry about leveling again. It's such s cool novelty though.

[@UncleJessy]

Yeah the leveling was cumbersome and time consuming but man is the potential there to print some hugely awesome things. I will be having a lot of fun with this printer … until I break it 😂

[@TwoMooseDesign]

That print save was amazing 🤌🏼🤌🏼

[@abovewongart]

Wow!! That's insanely huge!

[@BryanBalak]

I hope the Giga leads to more Klipper Core XY printers from Elegoo at a smaller size.

[@ultra_phantomaj8300]

That would seem to be a trend in general. Ever since Bambu, more manufacturers have been making Core XY's, and it's only a matter of time before they all start integrating Klipper in some way.

[@ScytheNoire]

@@ultra_phantomaj8300 Bambu just used what open source printers like RatRig and Voron had been doing for a while. Bambu just made it closed off and an appliance rather than a hobby in itself.

[@eslmatt811]

It's not core xy, you can see the x stepper moving on the y rail. My understanding is that core xy only scales to a point.

[@BryanBalak]

Let's just call it "non bed slinger" designs. Printers like this are easily enclosed, and their footprint isn't variable on the workbench. I like my 3 and 4 Plus printers, but so tired of dealing with adhesion issues due to bed movement and temperature variations.

[@ScytheNoire]

@@eslmatt811 Correct. There is a motor on the X axis gantry controlling it's movement. At that size, I'm not sure belts would have worked in a typical CoreXY configuration. This might be a use case where moving away from belts completely. Magnetic levitation linear motor system might be a great use case for these extremely large printers.

[@efremtommasi1387]

Wow leveliing that "floor bed" is gonna be a nightmare! And backache is welcome too

[@Berbelucha]

Im wondering, with such a long filament line between runout sensor and extruder, isn't it going to wrap around the axis and interfere with movement? maybe even touch the print, possibly catch onto something and cause fail?

[@kwisatzhaderach1458]

Who knows how many prints failed before this one was shown

[@evlsc400]

UncleJessy, thank you for being a creator and reviewer who prints a decent size print on the machines you’re reviewing, this thing is awesome.

[@ultra_phantomaj8300]

I'm excited for when more companies start coming out with large-format 3D printers in the commercial market and further bringing the cost down. Seems to be an ambitious step in the right direction.

[@AndrewHelgeCox]

0:55 Lots of dark shadows on edges of ornithopter print. Did it have bed adhesion issues?

[@vgatchaman]

Maybe try a USB extension cable so you can route it up top. This printer is WILD.

[@UncleJessy]

Ohhhh that’s not a bad idea as well!

[@TheDarkrider551]

Excited for when I get my giga, looking to print molds for carbon fiber composite bodywork on my formula cars and maybe designing fixtures for work... Maybe even a life-size formula sim rig for my spare bedroom..

[@hellcat1988]

This thing is just waiting for an affordable pellet print head mod to hit the market.

[@MakerBees333]

❤❤❤ This is the Update I have been waiting since November for, THANK YOU Uncle Jesse ⭐️⭐️⭐️⭐️⭐️

[@UncleJessy]

Peeps that backed it are going to have a lot of fun chewing through filament with this beast. Leveling was a bit cumbersome but man oh man am I loving being able to print just about anything on it

[@MakerBees333]

@@UncleJessy UPDATE: Got it delivered, and honestly got it up and running with no issues ❤. Your feedback along with many others made a huge difference because Elegoo listened 🤘! It is exactly what I was hoping for when the kickstarter was announced. I wanted to thank you for your hard work 🫡 because I would have been very frustrated if they didn’t make those changes and they would not have if some Pro Print Masters didn’t get their hands on it first. ❤❤❤

[@christianlainesse4281]

you could get an interchangeable lens camera and an ultra wide angle lens?

[@UncleJessy]

Just ordered a new mic because this rode wireless go was not good

[@3s-Woodworking]

I see a lot of post about the Max having problems if you don't preheat your bed about 30 mins prior to leveling. Is that the same with this?

[@kwisatzhaderach1458]

The larger the setup the more difficult it will be to regulate temps without a proper enclosure which = $$ and time. Most will probably lather the build plates with glue though..

[@awilliams1701]

that's actually a standard power cable for high amp power supplies. I think anything past 1KW uses that plug. It means the cable is thicker and can handle more power.

[@RossRadford]

Correct, it is a standard plug, just not as common. Regularly used in commercial applications like my Eaton 5P 2200 UPS.

[@mathyszka]

Imagine how much time you can save being able to print larger cosplay props in one go…. That printer is wild!

[@brdevll]

i can't help but laugh every time the banana for scale comes up on the screen, it's so silly yet funny

[@ATOMICS-z1h]

Can you throw dual extruder on it or did you say that? And what about malti color like for the posters and stuff if you don't have time to do a change over too.

[@ResinForge]

Now they need to do this for the Jupiter 😆Great video as always Jessy! 🙌

[@Bengamzo]

I understand that Klipper entered adaptive mesh bed( only on the print area) should be good for this printer and will save some time to start printing

[@KennyzKilla]

is it possible to mount the rear top bar to the front? that way you can sit the touchscreen on the bar with the filament spool holders? is is there wiring that requires the rear bar to stay in the rear?

[@psxtuneservice]

I wait till they offer a max version of it in the double size😂

[@JKSSubstandard]

The Creality Kar size printer

[@sierraecho884]

This really should be a granulate based printhead instead of Filament. You would save a ton of money and could recycle your prints at the same time.

[@MrVlodato]

why couldn't the spool just be mounted on the front? Wouldn't it operate the same way?

[@Impuritan1]

Man that would be awesome to use to print out the 3D topo maps.

[@paullender]

Couldn't you just swap the top back rail to the front to change the position of the spool holder and sensor?

[@equinones7ify]

I noticed there's marks on the pei plates. Is that glue stick marks? If so, I thought that wasn't recommended for pei plates. I thought the reason for pei plates is to eliminate the need for any added adhesive?

[@HappyHappyPanda88]

the auto mesh calibration changes is because of the pressure point abl system. This is the same as the Elegoo neptune 3 machine I have, The value is always changing even though I changed nothing.

[@scott5017]

That cable length is short on purpose, i can imagine this thing is drawing significantly more power than a regular printer. Increase cable length increase amperage.

[@FunctionalPrintFriday]

As long as the size of the conductors goes up, the resistance should stay the same.

[@scott5017]

@FunctionalPrintFriday which is why its short, bigger conductors bigger cost. I guarantee the longer one he got didnt have bigger conductors

[@richc9890]

When they coming out with a 800 x 800 PEI plate? 😄

[@saradeanna]

Why did you print the injection moulding sprues with the ornithopter?

[@Beakerzor]

I wonder if it would be feasible to have multiple heads printing at once, for these ultra large fdm printers

[@802Garage]

Those prints are... Impressive. A few issues, but this honestly looks pretty good. Wouldn't be hard to add an enclosure either, though a bit expensive. I mean, cardboard is cheap though. Given it can print stuff the rest of the market simply can't, I'm especially thinking car parts and large household items or huge models like you showed, it could probably pay for itself pretty quickly. Good stuff!

[@Madtraps]

Would it be possible to rewire the filament run-out sensor wires to the front of the printer? From what I see, it shouldn't have an impact on the hardware to move it to the front

[@Archie-ck8gy]

can tell elegoo is using this as a testing platform for a core xy printer thats smaller and more a bambu killer esk type machine

[@MageLeaderInc]

What type of nozzles does this use and can it print more exotic filaments like carbon fiber nylon, silks, ext?

[@marywel7615]

Y not get a heavy duty extension cord to plug into the 110 side of the specialty cord?

[@5FSF]

I recommend buying a bunch of small weights. You can embed them in prints or just put them inside the middle of things like the ornithopter. You'd be amazed how much being able to control the center of gravity can elevate prints without having to do really in-depth engineering of the models.

[@mmmuck]

would it be possible to print replacement car body panels with this?

[@Hellfreezer]

A usb extension cable might be the way to go to relocate the port to a more practical location.

[@Kerrathul]

Could you switch to a large sheet of borosilicate glass and remove prints with good temperature release glue?

[@kenzos_creations]

This is amazing dude. Next freakin level. And I have all Elegoo Printers, and I am extremely happy with them. 🤘🤘

[@88crowvideos]

You should print the Rancor’s hands or just the tips of the hands to make it a wall hanger with the appearance of it coming out of the wall. That would be badass!

[@opti_icecream]

Looks wild and I wish i could have got into the kicksterter pre-orders. I have a couple critisisms: Would love to see hookups for users to install their own shields for the front, back, top, and sides of the printer. Would also like to see a dark mode for the touchscreen.

[@BabyJesus66]

Use magnets to attach sides.

[@Ghxzt2161]

As far as the spool holders being on the back, is it possible to just mount the top rail backwards? The logo might be in the back but it sounds like a worthy trade off

[@brianwilcox2543]

How big could it print a Benchy? How big of an outboard would the USCG let you mount to the transom?

[@JohnB1163]

How about printing a Space Marine helmet and heavy bolter?

[@3DJapan]

I wonder why slicers based on Cura are always based on a really old version.

[@mistimpsmusings]

How difficult is it to get the 4 build plates aligned? I find the 4max build plate hard enough to maneuver. I can’t imagine lining 4 up with each other.

[@cameronelvin602]

how is the magneto project going ? I feel like this printer could to shot it

[@EdwardDowner]

I feel this is the perfect situation for a reverse bowden tube.

[@Invaderjason123]

Time to join the droid builders! You can print most the parts in one go with that massive printer

[@Demento1974]

@Uncle Jessy - The power cord is a standard IEC power cable (can't recall the style number off of the top of my head at the moment) but one can easily buy the plug from a local electrical supply store (off-the-shelf component). That plug is required due to the higher input current requirements that the printer needs (power cord is probably on a 14 gauge wire setup... looks that way to me). How much does the printer weigh??? Looks totally awesome otherwise. :)

[@Skott62]

I was watching a video of a review of this machine and the Elegoo VP did say they are going to make another smaller model unit in the OrangeStorm line. He didn't say how much smaller though. Sounded like they were going to make a few of these in the entire line eventually. No time line given either. I'm guessing everything is based on how well the Giga sells.

[@muzzletuffgaming6047]

Hey Uncle Jessy, Castle Gray Skull. Lets Goooo!

[@austinh_eth]

I’m curious, what was the file size for the rancor head gcode?

[@leedunning1825]

I've never had an interest in printing large items... until now. After seeing that rancor head, I'd love to be able to print out a giant beholder with gaping mouth and crazy eye stalks.

[@75keg75]

How does it account for deflection of the gantry. Do they compensate for that in firmware? Surely the centre will sage more than the edges.

[@lisaukgirl]

Can you put a volt meter to it? What wattage does it pull?

[@riodave4954]

good lord!!!! I almost backed this BUT the room it needs... lol had to walk away but WOW so neat!

[@cybair9341]

Yeah, that's a real problem. I wish the structure could be easily disassembled into flat subassemblies that could be stacked along a wall, for example. Then reassembled when needed.

[@speedstrn]

How long do you reckon before we get room-sized printers for furniture and cars?

[@josephkjelgaard9141]

They already do. And printers that LITERALLY print houses.

[@TwiggyMC]

Gotta love when people tell me about a kickstarter i can no longer back

[@ElectronicShredder]

Slightly better than knowing kickstarts that won't even ship to your country 😢

[@Kamteix]

This is an absolute unit of a printer. Very cool you choose my Dune kit, seeing it at such a massive scale is just wild.

[@randallbourque1321]

You could print the wings in LW-PLA from Polymaker.

[@Aiddy81]

Does the giga have an induction probe? If so I’ve found with my n3plus that when the bed is hot the induction probe will give you very different results everytime it probes. In your klipper printer config you can set the probe tolerance, number of times it probes a point and number of retries the probe will probe a point if results are more than the tolerance value set, this may help a little

[@jessehavok4181]

Jesus. Even at this size, the filament bracket is still mounted on the back. USB port on the floor? Why do these companies do this to us? Is it on purpose?

[@Luptonium]

Didn't realize the extruders weren't independent, that would have been so much cooler, but if I had one of those things would take one of those ultra detailed thrones they do for tabletop miniatures, cut it in half and have a full size one

[@monneratrj]

I mean, its cool its big but how long would it take to print something about the size of t he print area?

[@Kaiei3D]

painting this masterpiece will be very enjoy

[@ulforcemegamon3094]

Imagine how big a Zaku can be made with this one

[@Kaiei3D]

@@ulforcemegamon3094 interesting question， maybe can ask uncle Jessy have a test🤣

[@tisharabixa3385]

Hello, great job your doing. I would like to Know if you can help me with the parameters of this machine ( orange storm giga) for the orcaslicer. I need some help to put this machine on the orca slicer. Is there anyway you can help me doing this configuration?

[@AdamMclardy]

You need to turn on adaptive cubic for the infill to save so much time and plastic

[@glennxi]

Hey brother, quick question. Is there a pause feature to swap filament when I run out?

[@ExploringLifeWithChris]

Wow…that is ridiculously HUGE! 🤣 But really cool at the same time. 👍🏽

[@jamesgates1074]

You're going to need to buy filament by the ton to fill up this build volume.

[@goatelope7539]

That rancor is insaaaaaane

[@idgamingfederation202]

when can we get a Rainbow upgrade, would be great to have an option to have 4 colors be interchangeable

[@jessejohnson1538]

what kind of system are you using to hang up your PLA in the background on the wall there?

[@jessies9081]

Seems like "adaptive cubic" infill would be a must on those huge prints. Looks good though.

[@pablofiasco2]

Regarding that usb drive placement..... why not design a little flip down box cover big enough to git the usb drive while its plugged in, to protect it, and print it? Could be a fun quick little project?

[@o1ecypher]

yes yes yes, i love it!!! All i need now is a bigger desk...lol

[@UncleJessy]

I’ve been using one of the boxes as a standing desk 😂

[@o1ecypher]

@@UncleJessy lol

[@matthewmonarrez50]

Any chance youll go back on the 4 max now that they released those nozzle sizes you requested?

[@tombo7719]

Jesse, can you tell me where to get the CAD files for the giga? Mine just came in, I have a bunch of stuff, designs for it I want to get on the printers for it. I would LOVE that CAD file!!!