🔽 Check out other videos in the Dodge Avenger / 200 Chrysler Sebring series! 🔽 kzbin.info/aero/PLgeVnQRQkbzClMgLqkk36fHvasHNFghnD
@kenitra4558 Жыл бұрын
This video was very helpful. This just happened to my 2007 tonight. This got the gear shift to move but unfortunately the dash is stuck in neutral like the gear is not connecting too the engine. Thank you for this video.
@unclemarksdiyauto Жыл бұрын
It might not be connected under the hood. Or maybe the cable has broke. Be careful what ever you do.
@kenitra4558 Жыл бұрын
@@unclemarksdiyauto Thank you for the response. My mechanic said it was the cable under the hood and he also going to replace the gear shift. You definitely know your stuff!
@unclemarksdiyauto Жыл бұрын
@@kenitra4558 Thanks Kenitra! Don’t forget to subscribe. Lots of videos on this car in its playlist.
@DemonEmbarasser9 ай бұрын
Oh boy, having this issue today. This channel has been a godsend for me multiple times!
@unclemarksdiyauto9 ай бұрын
Good to hear the videos are helping. Sad to hear your having so many issues! Hope that this is the last time for a long time that it breaks down! Thanks for watching.
@plove91368 ай бұрын
Me too, Mark saved my butt & brain a lot!!!! Was an easy fix, 10dollar plastic bushing. Had to pay for tow.
@ethanberding20 күн бұрын
Thank you big help GMA 2007 200 died in the garage and the gear was stuck in park..
@unclemarksdiyauto19 күн бұрын
@@ethanberding nice you were able to get it to move.
@tomnorman457 Жыл бұрын
Our 2013 Chrysler 200 was stuck in park. Turned out to be a bad brake light switch. Bought a new switch and replaced the original switch. $16 for an OEM switch and we’re good to go. Not a difficult job, but it was a PITA working on my back.
@unclemarksdiyauto Жыл бұрын
Yep, they are interconnected. Cruise control issues can also stem through the brake switch.
@daiquiririchard8823 Жыл бұрын
My 2010 Sebring stuck in P, but driving forward! I've towed it but, am I understanding that it may be a brake system issue? Also, my cruise went out 6 months ago.
@unclemarksdiyauto Жыл бұрын
@@daiquiririchard8823 I would check the shift cable. Has it detached or some how gone out of alignment at the transmission? When you are really in park, the transmission stops the car from moving, not the brakes. I would guess the transmission is in another gear other than park.
@kysumthin37562 жыл бұрын
SHIFTER CABLE BUSHING, if this doesn't work for you look that up. It's if the shifter cable is loose, the bushing has fallen off. Bushing is a clip that goes onto the cable wire and then clips into it's secured location. If that cable is loose it won't shift gears. Took. About 10 mins for me to do. Part costed about 20 or less
@unclemarksdiyauto2 жыл бұрын
So good to know! I’m sure your input will save someone some time & frustration! Thanks Ky.
@plove91368 ай бұрын
Same happened to me last night. Uncle Mark made it easy to disassemble & put back NO PROBLEM. IT WAS SO EMBARRASSING WHERE I WAS IN FRONT OF VALET AT A FANCY RESTAURANT IN BOCA RATON. SHEESH, CHYSLER GARBAGE, PURE COBBAGE. had a brand new ram & trans slipped after babying it for 2500miles. Junk cars, will never buy again. My dad's sebring btw.
@turbotom4162 жыл бұрын
that is racall , the dealer will install a metal clip to hook the spring to.
@unclemarksdiyauto2 жыл бұрын
Good to know.
@meljohnson59262 жыл бұрын
Wow!!! OUTSTANDING VIDEO! Well explained! The absolute BEST I've seen in YT!
@unclemarksdiyauto2 жыл бұрын
Thanks Mel, I try as a relatively newer channel, but probably not THE BEST! Every time I do a video, I hopefully learn what can be improved on. Hope you gained some insight on this shifter. Take care.
@WillieSandersIII Жыл бұрын
TLDR: 2014 Chrysler 200 base is stuck in neutral. I hope you reply but your video did shed light on shift lock procedures... Thank you for your content. But, my 14' 200 (1st gen) is stuck in neutral. I drive the car as a daily commute for work (20 minutes either way) but isn't used for anything else (I drive the family truck, otherwise). There was a cold snap (in Florida) and warmed my 200 as normal. I drove all the way back home from work and as I was stopped in the parking lot and shifted to park, the dash read (Neutral) but the shifter was in park. Thanks again for your video because I was able to troubleshoot the issue, seeing as though the shifter cable is still taught and was able to move the shifter. It's still in neutral and I cannot find anything online about the issue. 78199 miles and properly maintained. Historically, I had reoccurring alternator issues having to replace the battery and alternator 3 times before it was fixed. (2022) Can you point me in the right direction? @unclemarksdiyauto
@unclemarksdiyauto Жыл бұрын
I wonder if the linkage has moved on the transmission side? Can you unhook it at trans and see if you can shift trans at the trans. ( vehicle parking brake on and car not running)
@WillieSandersIII Жыл бұрын
@@unclemarksdiyauto thank you for your reply. I will update you here. Just just in case someone else runs into this issue.
@WillieSandersIII11 ай бұрын
@@unclemarksdiyauto shift linkage. 😫....But the check engine light came on after the Repair. I will update you.
@unclemarksdiyauto11 ай бұрын
@@WillieSandersIII Coincidence? Let us know what the check engine light tells you!
@unclemarksdiyauto11 ай бұрын
Check engine light? If it was on during the video, car was not running. Computer just checking the check engine light.
@michaelpaquette2 жыл бұрын
You are not explaining that their is an access panel for the right side if you remove the rubber cup holder. It makes it a one person job much easier....for a quick fix.
@unclemarksdiyauto2 жыл бұрын
On the newer ones yes. This one does not have that on the 2007 model, unfortunately.
@plove91368 ай бұрын
Thanks my friend. QUESTION: THE CABLE BUSHING IS BROKE IN PIECES, when i hold it in place everything works properly, DO I STILL NEED TO REPLACE SHIFTER ASSEMBLY??? TY FOR EVERYTHING, YOUR THE BEST.
@unclemarksdiyauto8 ай бұрын
It has been a while since I had this apart. I bet there are no parts available for repair, but you can check. I wonder if you could find a good used one somewhere? (Like auto wrecker or Ebay?)
@plove91368 ай бұрын
@unclemarksdiyauto ty sir, I ordered a 10dollar plastic bushing & drove the vehicle with no problems whatsoever. I held the cable in place while shifting from park to reverse etc. You helped me out my friend, BIG TIME!!! PEACE & STRENGTH TO YOU! edit>Was the bushing for the transmission cable.
@unclemarksdiyauto8 ай бұрын
@@plove9136 Great deal to repair you issue! A repair shop probably would have made you replace the whole thing.
@plove91368 ай бұрын
@unclemarksdiyauto yep, just got the bushing in the mail... All is good, thanks again my friend.
@unclemarksdiyauto8 ай бұрын
@@plove9136 Stay in touch!
@malakomx3 ай бұрын
Ring the bell! 🐕
@unclemarksdiyauto3 ай бұрын
@@malakomx Lol! Of course now the bell “all” notifications is automatically set, so a person needs not touch it. (Not sure what the little dog will do now!)
@toriibishh2x1832 жыл бұрын
If stuck in 1st it is the same procedure as park flipping both the pieces will release it
@unclemarksdiyauto2 жыл бұрын
I could be wrong, but I don't think so. It should move freely between first and reverse, only locking in park. (I may be mistaken) Wondering if cable on top of transaxle has moved, or something has jammed it there? You should be able to unhook it at transaxle and see if from inside the car the shifter moves. It seems strange to me that it is stuck in first.
@k9under2 жыл бұрын
Thanks i have two chrysler.
@unclemarksdiyauto2 жыл бұрын
certain cars have this a a recall. You can look it online & enter your serial numbers.
@plove91368 ай бұрын
Sell em both real quick. In 56yrs I never seen such a troublesome problem on any car. I got stuck in the middle of a bunch of fancy cars last night, aaarghhhh🤣 SO EMBARRASSING!!! 10 DOLLAR BUSHING MADE OUT OF PLASTIC.
@lcmchavez75215 ай бұрын
So what would the park be called for the park solenoid
@unclemarksdiyauto5 ай бұрын
Probably a shift interlock module, (if that is your problem). You have to buy the whole shifter. You would have to test the electrics of it to see if it getting power when you apply the brakes.