Underbuilt Results In This!

[@jeffcrivelli2906]

I’ve had problems with my tanks leaking as well in the past. It’s all about vibration. I found putting 1/4-3/8” thick piece of rubber under the tanks makes all the difference in the world. Belting or get a piece cut to size does wonders.

[@brettlamont4965]

Nice to see a big time farmer who runs equipment into high hour life. That is where your ROI comes into play.

[@dustinvanweerd2309]

I had the same problem with some of my tanks, instead of trying to weld the outside corner, I used 1x1x3/16 angle iron around the edges that where contacting anything. Did the original welds then pressure test, then weld the angle and pressure test again, I’m going on 5 years since I did that with no issues

[@davidrobins7753]

Wishing everyone at Larson Farms a healthy and blessed 2025. Chet, thank you for the great job you do on the videos. I always enjoy them and appreciate the effort you make.

[@edselcross9536]

Yooooo Farmers! Did ya ever notice that vehicle-mounted tanks have soft mounts to secure them in place? They have this because fluid forces are rhythmic in nature and the energy of that intertia is mighty powerful. It either needs a springy mount or like space shuttle overbuild. -TMYK

[@leddielive]

If it just sat on timber, it would help cut down on vehicle vibration cracking the tank.😀

[@userDominic_78]

Happy New Year @LarsonFarms!!

[@steveneal2706]

Awesome video. thank you

[@joshwagner5414]

Why not weld angle around the outside corners to help stiffen, and also put rubber underneath it so the vibrations don’t kill it

[@jimskull168]

Happy new year to all of you and family from Ontario Canada

[@juanitakauffman6336]

Happy New Year all of Larson Farm nd families.

[@timmiekrause4930]

Happy New Year Larson Farms

[@Thomas-qc8bu]

It's amazing what a new hoist wil do. Big red servived another now be great time to work on it

[@PaulChristiansen-mq2wb]

Happy New Year to Larson Farms

[@rusnsc7622]

Happy New Year Larson Farms and crew!🙏🇺🇸

[@Victor-i6e]

Happy New Years to you all. Thanks for sharing your lives with us. Be safe. Stay well. Victor

[@tonyb-u.k.939]

Happy New Year 🎉

[@curtisanderson1830]

Happy Holidays to everyone at Larson Farms

[@carriegrosenick6426]

Happy New Year Larson Farm 🎉

[@shyfarmboya]

Go to gas tank renew. There is one in Minnesota they renew gas tanks that leak. Check them out.

[@thomasmarti5856]

Have a safe and prosperous New year all!

[@AaronKnutson-u6k]

I have been watching you guys since the beginning. Every video i think to myself, maybe they will unveil their new service truck in this one... maybe next one. Happy new year!

[@stevebiddle8912]

Happy New Year to you all. Wishing you a safe, healthy and prosperous 25.

[@TheBest-ob1kj]

Always fixing to be done. Way to go guys! Great video ❤

[@truckermike1997]

Happy New Year to the whole Larson family and crew!

[@anthonycano2090]

I hope you guys have a nice New Year's Day I'm glad your dad got over the sickness and your mom

[@jerryfish1303]

Happy New Years to all that make this channel one of the BEST DOGO CHET BRODI ERIC AND ALL OF THE WIFES thanks so much from Michigan

[@Grandpaw2511]

Happy New Year to the Larson Farms. Wishing Y'all a safe and prosperous 2025.

[@dannygavin5860]

Good job

[@antnewbon2673]

Thats a man with three tails moving that crane bless happy new year all. Xx god bless bump. X

[@timothyfry8470]

Happy New Year to all of the crew at Larson Farms

[@TimMai-tf5pc]

HAPPY NEW YEAR!

[@robertdehring8471]

Happy belated Holidays Larson Family and workers

[@robertquast9684]

Problem with tanks on trucks or trailers is the vibration and the sloshing of the fuel. Should have baffles or tie bars connecting the ends together

[@willgallatin2802]

Chet, steel MOVES while you're welding it. No surprise to me you needed to redo the plumbing when you set the tank back in place. If you need to pull that tank again, it might be a good idea to put on some better lift points.

[@lstone.09]

Awesome video guys. 🚜🚜🚜

[@PetterPedersen-c5j]

❤ from Norway Godt nyttår til deg og dine

[@michaeltablet8577]

Happy New Year to you all!! God bless you all and keep you safe!!

[@SteveNicoson-u1i]

Thanks for the video. Shop is busy with projects. Happy New Year to ALL of you. The Iowa farm boy. Steve.

[@jeffkizer6666]

Happy New Year to you all!!

[@dennislamers986]

Have a safe New Year to the whole Larsen Farms family.

[@dperry364]

**PLEASE PLEASE** Make sure you wash out the tank next time. Also have plenty of ventilation. I had an Uncle that was a professional welder. Built many things in construction welding for years. He opened a small welding shop and a guy came in to weld a diesel tank, had a hole in it. He located it and sat down on the tank welded between his legs and he missed taking off the cap and the fumes exploded and he spent years dealing with his injuries.

[@Budd56]

It was probably a gas tank.

[@joepfeiler5911]

@@Budd56 I heard diesel tanks can explode also. I know a guy who had nine lives that blew on up.

[@tincan6929]

Lol golf balls on the bench 😂😂😂 happy new year guys

[@rickrick7309]

Good luck to you on a new year an your up coming little one

[@thomasmiller2284]

What a coincidence Dougo, I'm doing the same cleaning project in my shop.

[@alanshelby5980]

Although it is not always possible but a tank made with more break/bent corners instead of welded. All comes down to fit up

[@dominicdahlheimer6861]

Keep cleaning there Dougo! Eventually it will look better!😊

[@hammerslammer3006]

The few fuel tanks I've repaired or built, I put some half inch angle iron along the bottom side

[@danzero50]

Have a very happy,blessed and productive new Year1🎉🎉🇺🇸

[@rdyardie]

Happy New Year from Calgary, Alberta. Your projects are interesting to watch. We look forward to 2025.

[@jrstrande4890]

Happy New Year. Thanks for the episode.

[@Justin1025r]

Happy new year Larson farms

[@jeffreyanderson5304]

Have a great and safe new year chet Dougo Brody Erik and Amy so great to see a video

[@BillyTheKid689]

Happy New Year guys. Hope 2025 is a blessed year for y'all.

[@anthonyhengst2908]

I'm ready to go out planting.... Ive got to wait 4 months though.

[@tomfawcett6828]

Happy new year 🎉

[@jimjohnston-ox5sv]

Happy New year to you Chet and the rest of the crew

[@RobertFramejr]

Happy new year to all of you guys and toby

[@rickthompson4315]

Happy, Happy, Happy New Year, Larson FARMS!

[@janpeeters1578]

happy new year to all 🥰🥰🥰🥰🥰

[@johnsandell4501]

Enjoy your team.

[@ShawnNewhook]

Happy New year🎉🎉

[@basiljarbo8888]

Happy new year Larson family 🇺🇸🙏🙏🙏

[@richiecaelwarts1911]

Happy New Year Larson farm boys hope you have a awesome growing season in 2025 and a safe one as well .

[@jeffsmulcer8904]

Happy new years from Kansas and the smulcer family

[@lukethurman2672]

Happy New year guys

[@GeorgeUnterbrink]

Have a great new year Larson farms and hope everything goes great for you in 2025!! 🎉

[@Tanks-Link]

I put that court back in it and put about 25 pounds of air in it and let it sit overnight and see if it lost the air or not

[@Nyhetskanaler]

Happy New Year

[@jrrobertson9676]

You guys have wonderful year next

[@KNJensen]

That crane though ❤

[@davecramer9725]

Happy new year to the larson family farm crew

[@stakman78]

Happy New Year from New Zealand

[@JosephW.Gordon]

Chet, Noticing Fuel Oil piping as You removed, The Tread Sealant is Incorrect. Teflon Tape is Petroleum Based and will detreat over time generating Leaks of Fuel Oil / Gasoline. The proper pipe thread Sealant is PERMATEX , requiring 12 Hours of set up time prior to having product installed. Hope this Helps You.

[@gregjames5070]

I didn’t hear him ask for your opinion.

[@alexanderrobertson9297]

So a diesel tank that looks like it's hard mountain to the back of a truck is starting to crack after 15 years. I don't think it's because the welds are small or because it's not up to standards but because its worn out and suffering metal fatigue would not be surprised if in a couple of years it starts cracking again.

[@mikebultema2536]

Is the long metal pipe supported in anyway? If not that weight while driving may cause the sheet metal sides of the tank to flex and stress the welds.

[@amybly6191]

Happy new year!!!

[@brianwilton8555]

great video

[@davidkimmel5153]

Thanks

[@chrisanderson8781]

As always another great video, Happy New Year.

[@69dblcab]

Happy New Year

[@tonymartin9381]

Chet on that fuel tank put some rubber on the corners to cushion it

[@rogernighbert5436]

Happy New Year Guy's

[@scottlawrence3204]

Have a safe and happy new year farmers boys!

[@randybennett5417]

HAPPY NEW YEAR ! From Camden, De.

[@fredericdelage1542]

Magnifique vidéo et la cuve à gasoil est resoude et bien intéressante 😂😮😅

[@dmorgan28]

Hey Chet. Another good video. Dougo was hilarious as usual. My wife and I celebrating 41yrs married after going and having dinner, we’re watching this video 😂. Just a little humor😅. You guys have a Happy New Year. 🎄👍❤️

[@BuckWheat0591]

Another barn burner, nice!

[@JohnDeere-jw7jf]

Love it

[@jls7006]

Thanks for sharing

[@fleece192]

Good stuff Larson Farms. Looking 👀 forward to spring. Thanks. Happy 2025.

[@RobertFay]

*- To prevent wrecking the alternator housing bearing by tightening the belt too much, use WD40.* *- The fish oil of WD40 will not eat the rubber of the belt. It makes the V-grove sticky.* *- Always worked for me with just one application.*

[@bluecollarcreative]

Happy New Year boys! Excited for what's coming in 2025!

[@Packer910]

Did you ever think of covering the tank in rhino lining? Keep it from rubbing through

[@daveklein2826]

You weren't around to tell them

[@charlesnadeau6260]

Happy New Year from Maine, See everyone next Year in 2025... Be safe....

[@RandyHunt19]

Happy New Year Lawson crew and all the best in 2025! Best farming channel on KZbin!!

[@blanekopp7339]

May your New Year be over filled with corn,beans and black beans!! Happy New Year to the whole Larson family and friends!! Stay safe!!!!!

[@willyfindlay4398]

Happy New year to sll our colonial friends in the Rebel States of America from all of us in the United Kingdom 🇬🇧 😊

[@larrykluckoutdoors8227]

The over head crane sure is worth it cost now

[@kentonleriger8288]

Time to get new quads

[@kat2641]

Looking forward to a great 2025