Unloader Upgrade on the 4 GPM

  Рет қаралды 20,126

All Pro Exterior Services LLC

All Pro Exterior Services LLC

Күн бұрын

Пікірлер: 92
@deeman77777
@deeman77777 2 жыл бұрын
I just wanted to say THANKS!! I have watched so many of your instructional videos and literally play and pause to do the same tasks you are doing. So far you helped me with the remote DS injector, the DIY propotioner and now this K1 unloader setup - you are awesome, thanks! I owe you a ginger ale if we ever meet :)
@allproexteriorservicesllc5338
@allproexteriorservicesllc5338 2 жыл бұрын
Mike, thanks for the kind comment. Comments like yours makes everything worth while! Helping people out to be more efficient and giving back. I would love a ginger ale if we ever meet up. Thanks Brother!
@michaelc7283
@michaelc7283 Жыл бұрын
@@allproexteriorservicesllc5338 Got it. Thank you 😊 👍
@day2day734
@day2day734 3 жыл бұрын
The way it gently releases is so satisfying!
@allproexteriorservicesllc5338
@allproexteriorservicesllc5338 3 жыл бұрын
Agreed!! Thanks
@xMouseTrapDJx
@xMouseTrapDJx Жыл бұрын
@@allproexteriorservicesllc5338 Are you upgrading your GPM?
@arronjohnston742
@arronjohnston742 9 ай бұрын
thank you! the best video i've found on setting up by far!
@allproexteriorservicesllc5338
@allproexteriorservicesllc5338 9 ай бұрын
Thanks!
@allaboutdetails3356
@allaboutdetails3356 Жыл бұрын
Just used this video today to swap out my Unloader ! Thank you !!
@allproexteriorservicesllc5338
@allproexteriorservicesllc5338 Жыл бұрын
Glad it helped. Thanks
@steviehobgood3003
@steviehobgood3003 Жыл бұрын
Thanks for the videos
@johnwitt586
@johnwitt586 3 жыл бұрын
Great video! Thanks for posting!
@SleepingGaint
@SleepingGaint Жыл бұрын
Great video, I’m wanting to put these k1’s on my 4 and 8 gallon machines. Did you have to mount the unloaded that way? Could you have attached it to the machine the way the original unloaded was mounted? I didn’t catch as to way to bolted it to the frame. Thanks
@allproexteriorservicesllc5338
@allproexteriorservicesllc5338 Жыл бұрын
I wanted to mount the unloader off the pump to keep the additional weight off the pump. You could mount it to the pump if you have to. Thanks
@RestoreProPressureWashin-cg6lw
@RestoreProPressureWashin-cg6lw 8 ай бұрын
Great video! I have a question for you. I noticed you have a drip coming from unloader. When I installed my k1, I bought specialty bsp to npt adapters just to make me feel better about threading everything together. My unloader works great and I love it but from day one it has leaked where the unloader goes into the block and I can’t get any answers whether this is ok or whether it needs to be addressed and how. I used blue monster tape and a little bit of tru blue over threads which has never leaked on me before. Any feedback would be greatly appreciated!
@allproexteriorservicesllc5338
@allproexteriorservicesllc5338 8 ай бұрын
Our unloader on the big machine leaks as well. I have not noticed any difference in performance from the machine. We used tru blue sealant, but it still leaks. Since it is just water, we have not tried to stop the leak since it so small. I hope this helps. Thanks
@RestoreProPressureWashin-cg6lw
@RestoreProPressureWashin-cg6lw 8 ай бұрын
Good to know it hasn’t caused you problems. You probably run your machines harder than I do so that makes me feel better. Thanks for the feed back!
@HenryDixon-g6g
@HenryDixon-g6g 3 ай бұрын
Great video question I want to change my unloader to a Gp K7 to take away the kick when the trigger is engaged, I am running a Honda GX 690 3000psi pressure washer. At idle what I should see on my gauge? and what should I see when the trigger is in gauged thanks
@allproexteriorservicesllc5338
@allproexteriorservicesllc5338 3 ай бұрын
Thanks! On the trigger, you should see close to what the pump is rated for. I do not remember the pressure when off the trigger.
@Majjoost35
@Majjoost35 4 ай бұрын
What fitting did you use for the bypass? I can't find anything to fit mine
@allproexteriorservicesllc5338
@allproexteriorservicesllc5338 4 ай бұрын
1/2" NPT to 1/2" barb. Thanks
@TheFreshRinse
@TheFreshRinse 3 жыл бұрын
Great video brother, at a great time. I’m about to install my K7. Question: When your machine is off, what does the gauge read? It should be at zero.
@allproexteriorservicesllc5338
@allproexteriorservicesllc5338 3 жыл бұрын
Thanks!! The gauge reads zero when off.
@brushbristlepressurewashin4258
@brushbristlepressurewashin4258 2 жыл бұрын
@@allproexteriorservicesllc5338 Why zero when you're not pulling trigger? Just trying to understand. Thank you
@allproexteriorservicesllc5338
@allproexteriorservicesllc5338 2 жыл бұрын
@@brushbristlepressurewashin4258 Because it is not under pressure off the trigger. It sense flow and then builds pressure. Thanks
@jamescarter-ze5hm
@jamescarter-ze5hm Жыл бұрын
The Fresh Rinse has got to be the coolest name I've come across..
@TheFreshRinse
@TheFreshRinse Жыл бұрын
@@jamescarter-ze5hm Thank you. All credit goes to Joe Deery
@tyriceholliday4151
@tyriceholliday4151 5 ай бұрын
Are you using this as a softwash as well if so are you batch mixing
@allproexteriorservicesllc5338
@allproexteriorservicesllc5338 5 ай бұрын
Not anymore. When we did use it, we had it connected to the SH tank and down streamed. Thanks
@Player__Unknown
@Player__Unknown Жыл бұрын
Did you make the mount that the machine is sitting on? If not where'd you get it?
@allproexteriorservicesllc5338
@allproexteriorservicesllc5338 Жыл бұрын
I made the mounting stands for the pressure washers. Thanks
@luisverde1156
@luisverde1156 2 жыл бұрын
Question brother why did u change ur unloaded? And was this unloaded bigger (more flow) ?
@allproexteriorservicesllc5338
@allproexteriorservicesllc5338 2 жыл бұрын
I changed from. Pressure trap unloader to a flow sensitive unloader. Thanks
@MrDarrinSmith
@MrDarrinSmith 2 жыл бұрын
I'm about to put the zk1 on my 8.5gpm 3500psi pump. The guy at the local pressure washer store says sometimes they have issues with running long lengths of hose (300' on my reel), extension pole, and downstreaming. I was wondering if you ever run into it acting weird at any time. Can you use your ball valve for rinsing ok. Just wondering if there is anything i need to watch for or behavior i might need to change. I hate the thought of getting on a job and finding out the hard way. Thanks.
@allproexteriorservicesllc5338
@allproexteriorservicesllc5338 2 жыл бұрын
I have not ran into any problems to date. i also use my ball valve for rinsing all the time. But, I also only run 200' of hose. Thanks
@jonboysprowash7845
@jonboysprowash7845 Жыл бұрын
What pressure was you trying to get to in the video? Do you max the pressure out of the unloader or set it to a certain pressure?
@allproexteriorservicesllc5338
@allproexteriorservicesllc5338 Жыл бұрын
You want about a 5% of bypass when on the trigger. Thanks
@michaelc7283
@michaelc7283 Жыл бұрын
Question: On the unloader bypass hose line. You mentioned that you changed it to 1/2" hose. Is that the size of the inside diameter (I.D.) or the outside diameter (O.D.) of the hose? Does it make a big difference?
@allproexteriorservicesllc5338
@allproexteriorservicesllc5338 Жыл бұрын
1/2" ID. The reason I use 1/2" is because the unloader has the 1/2" bypass instead of 3/8". Thanks
@dannycrain3485
@dannycrain3485 3 жыл бұрын
Unloaded valve. Dont have kick back on the gun. When you hit the trigger . What's it call .where and the cost. And your feed back on it. Thanks
@allproexteriorservicesllc5338
@allproexteriorservicesllc5338 3 жыл бұрын
It is a flow unloader and available at Southside Eq. I have the GP ZK1. Thanks
@bananacakes8939
@bananacakes8939 Жыл бұрын
how did you solve the British thread problem Where did you get the reducers
@allproexteriorservicesllc5338
@allproexteriorservicesllc5338 Жыл бұрын
I just forced it and applied True Blue and have not had any problems. Thanks
@bananacakes8939
@bananacakes8939 Жыл бұрын
@@allproexteriorservicesllc5338
@bananacakes8939
@bananacakes8939 Жыл бұрын
what is paid 180 bucks for this unloader . British threads are British threads I live in South Carolina I **** hate this ****
@bananacakes8939
@bananacakes8939 Жыл бұрын
last resort tell me more I wanna hear it?
@allproexteriorservicesllc5338
@allproexteriorservicesllc5338 Жыл бұрын
@@bananacakes8939 Agreed! I have not any problems forcing the threads. Not saying it is the correct way, but that what I learned when installing mine. Thanks
@JB_FL-q4o
@JB_FL-q4o 3 жыл бұрын
Hey where did you have your shirts made? They look great. Thanks
@allproexteriorservicesllc5338
@allproexteriorservicesllc5338 3 жыл бұрын
I had a local shirt company make them for me. It has been an experiment and they may offer them soon. Thanks
@jodyparker5810
@jodyparker5810 2 жыл бұрын
I installed the K7.1 unloader and adjusted accordingly and everything is working properly. When I idol down the machine I am getting a hard surge on the bypass line, when I idol back up it goes away. What can be done to fix this issue? Thanks
@allproexteriorservicesllc5338
@allproexteriorservicesllc5338 2 жыл бұрын
It may be due to the low RPM not providing the power to send the water through. I have not had this happen. Thanks
@jodyparker5810
@jodyparker5810 2 жыл бұрын
I appreciate the response and all of the content you share with the Wash community.
@admar6272
@admar6272 3 жыл бұрын
Why did you picked the ZK1 instead of the K7 unloaded for this pressure washer? Thanks in advance!!
@allproexteriorservicesllc5338
@allproexteriorservicesllc5338 3 жыл бұрын
I heard the K7 was finicky and a few people recommended the ZK1. Thanks
@admar6272
@admar6272 3 жыл бұрын
@@allproexteriorservicesllc5338 thanks a lot !!
@jonboysprowash7845
@jonboysprowash7845 3 жыл бұрын
Has this setup worked good for you? I just got a 4gpm and want it to last as for as long as it can.
@allproexteriorservicesllc5338
@allproexteriorservicesllc5338 3 жыл бұрын
It has been working great. I thought the same thing about my 4 GPM when I first got it. It will not be long before you want to upgrade to more flow. Thanks
@palmtree8604
@palmtree8604 3 жыл бұрын
🌴 very cool and safer. Now you can film with one hand without smacking your teeth out! 🌴
@allproexteriorservicesllc5338
@allproexteriorservicesllc5338 3 жыл бұрын
LOL!!! It will help! Thanks
@keionamey84
@keionamey84 3 жыл бұрын
Would you go from a 4gpm to a 8gpm or keep the 4gpm with a unloader upgrade or go 5.5 gpm with a limited budget. All with a gx390
@allproexteriorservicesllc5338
@allproexteriorservicesllc5338 3 жыл бұрын
I would go with the 5.5 gpm. A little more flow and still pulls a good percentage of SH. Thanks
@erikservices
@erikservices 9 ай бұрын
Where you put your chemical injectior
@allproexteriorservicesllc5338
@allproexteriorservicesllc5338 9 ай бұрын
We put the injector close the reel. Thanks
@erikservices
@erikservices 9 ай бұрын
@@allproexteriorservicesllc5338 why won't mine pull from the hose reel
@HouseWashingRick
@HouseWashingRick 3 жыл бұрын
I have the same machine what is the reason for this. Are there any benefits from this
@allproexteriorservicesllc5338
@allproexteriorservicesllc5338 3 жыл бұрын
I perfer the soft touch unloader instead of the pressure unloaders. The benefit for me is not having a blast of pressure when you pull the trigger. Thanks
@joeplume8048
@joeplume8048 2 жыл бұрын
@@allproexteriorservicesllc5338 couldn’t a soft touch unloaded come right off the pump? I don’t understand why the block was needed.
@allproexteriorservicesllc5338
@allproexteriorservicesllc5338 2 жыл бұрын
@@joeplume8048 Yes you can put it directly on the pump. The purpose of the block is to remove the weight & vibration from the pump. Thanks
@AutoDudes
@AutoDudes 3 жыл бұрын
Question…do I need to have water coming out of the bypass when I’m on the gun? What happens if I don’t have water coming out while I’m on the gun?
@AutoDudes
@AutoDudes 3 жыл бұрын
@@MikeWho_MikeJones I understand what a bypass and chemical bypass is. At 12:15 is what I’m talking about. Why are you checking for a trickle of water from the bypass line?
@allproexteriorservicesllc5338
@allproexteriorservicesllc5338 3 жыл бұрын
GP recommends a 3-5% trickle out of the bypass. I use this method instead of worrying about pressure. Plus what Mike Jones mentioned Thanks
@Syphyllchris
@Syphyllchris 2 жыл бұрын
It SAAAAAYS 3600 psi... can it handle 4k???
@allproexteriorservicesllc5338
@allproexteriorservicesllc5338 2 жыл бұрын
Not sure about 4K, but that is a lot of pressure. Thanks
@Igor-q3f
@Igor-q3f 3 жыл бұрын
Is it true these float unloaders have problems with down streaming?
@allproexteriorservicesllc5338
@allproexteriorservicesllc5338 3 жыл бұрын
I have not had any trouble with DS'ing. Thanks
@briantorsell
@briantorsell 2 жыл бұрын
Does the unloader bypass water as long as the engine is running or only when you get off the trigger?
@allproexteriorservicesllc5338
@allproexteriorservicesllc5338 2 жыл бұрын
Mainly when you are off the trigger. The bypass will direct the water back to the buffer tank. Thanks
@briantorsell
@briantorsell 2 жыл бұрын
@@allproexteriorservicesllc5338 Thanks!
@cadillaccrow808
@cadillaccrow808 3 жыл бұрын
YOU GOT TO USE THE GREEN TIP TO AJUST THAT RIGHT!
@allproexteriorservicesllc5338
@allproexteriorservicesllc5338 3 жыл бұрын
It doesn't matter the color of the tip as long as the orifice is correct. The color only represents the spray pattern. Thanks
@joeplume8048
@joeplume8048 2 жыл бұрын
@@allproexteriorservicesllc5338 what is the correct orifice for adjusting that unloaded, I’m thinking of doing the switch out myself? Also can that zk1 go on a 5.5 ?
@allproexteriorservicesllc5338
@allproexteriorservicesllc5338 2 жыл бұрын
@@joeplume8048 Yes, the ZK1 can be used on a 5.5 GPM unit. Just make sure you get the one that meets the GPM. You should used any color spray tip for a 5.5 unit. Thanks
@calebwhite5640
@calebwhite5640 2 жыл бұрын
Can you run the wash down gun with this ?
@allproexteriorservicesllc5338
@allproexteriorservicesllc5338 2 жыл бұрын
I have seen people successfully running this gun with the ZK1 unloader. Not recommended for a pressure trap unloaded. Thanks
@savagestyle124
@savagestyle124 3 жыл бұрын
where do you get that high pressure lines
@allproexteriorservicesllc5338
@allproexteriorservicesllc5338 3 жыл бұрын
Southside Equipment. Russ is great to deal with and is very helpful. Thanks
@AndYetHereWeAre
@AndYetHereWeAre 2 жыл бұрын
BIG question for you my man. That mounting block. I know you got it from Russ. Any idea what the part is called?
@PHFloppyD
@PHFloppyD 2 жыл бұрын
Just ask for the brass mounting block. They’ll know what you need
K7 Unloader Solution-Fix
20:17
Powerful Improvements
Рет қаралды 9 М.
Pressure washer unloader conversion
14:24
Brian Shumack the repair guy
Рет қаралды 20 М.
Человек паук уже не тот
00:32
Miracle
Рет қаралды 2,4 МЛН
兔子姐姐最终逃走了吗?#小丑#兔子警官#家庭
00:58
小蚂蚁和小宇宙
Рет қаралды 13 МЛН
CAN YOU DO THIS ?
00:23
STORROR
Рет қаралды 43 МЛН
How to whistle ?? 😱😱
00:31
Tibo InShape
Рет қаралды 22 МЛН
How To Plumb A Unloader Valve To Buffer Tank
4:38
King Of Pressure Washing
Рет қаралды 37 М.
Pressure washer unloader types
10:30
Brian Shumack the repair guy
Рет қаралды 56 М.
Budget Build Part 2: Plumbing your Pump to the unloader
9:37
Kentucky Wash Pros
Рет қаралды 15 М.
HOW TO CHANGE AN UNLOADER ON A PRESSURE WASHER @littlespressurewashing
17:13
Berry Little | Littles Pressure Washing
Рет қаралды 8 М.
UNLOADERS PART 1: How to Set an Unloader
6:12
Keeping it Clean with Veloci
Рет қаралды 66 М.
I dug a 40 foot well in my backyard
15:01
Bad Homeowner
Рет қаралды 1,5 МЛН
External UNLOADER VALVE Bypass Water Back to Tank for Small Pressure Washing Business Tips
7:49
Unloader blocks & jumper hoses for your pressure washer.
14:53
Spray Wash Academy
Рет қаралды 14 М.
Человек паук уже не тот
00:32
Miracle
Рет қаралды 2,4 МЛН