Upgrade Cargo Tractor to 196cc and CVT Gearbox, Led Bar

[@eaglestoneworks9572]

Mud guards. Foot boards. Beer Holder. Horn. Then youre in business. Highly impressed! Excellent skill.

[@357Mxgnum]

No mud guards

[@JD-kg3mx]

I loved everything about this builder video. It blows my mind how the axel wasn’t welded in a jig or using a measured form as were cuts made with a powered hand grinder/cut wheel without regard to being plumb. Yet, they were! You are incredible, just fantastic. I noticed the gearbox wasn’t accommodated with a carriage or with a modular frame, welding the entire unit to the frame - but it works until it has to be replaced.

[@rumplestiltskin1682]

J D We called them “One eyed buffaloes” because there was one headlight in the middle on the front.

[@heli-man-]

You need to start putting mud guards over the wheels of your builds it would finish them off nicely 😁👍

[@bigjim8088]

Fenders would be a nice addition. You wouldn't have to worry about mud and water so much. Great job!👍👍👍

[@ibdaffy]

Absolutely amazing! What skill, what a shop! No GoPowerSports here! This gentleman is a genius!

[@dageide6008]

WOOOW, this is TOP. Its so good to see a video without all the safety and security about sharp and warm tolls, safety glasses and bla bla! And You make it so simple and practical! My hat off for you mister.

[@stevenjohannesen88]

Great video, no commentary,or music or any other distractions, ❤️ it.....

[@vz6715]

I work as a mechanic for tractors 🚜 Go karts and lawnmowers, but I would not been able to build this. Very impressive

[@semezzara]

Amazing!! You have the cargo tractor, now you must have/built the forklift!

[@TomCro2022]

Superb! Very very very good video and sound ! Great! Greetings from Zagreb / Croatia

[@MIKEH.777]

You are amazing the way you just go to your shelfs pick parts up and build great stuff I love it and I will watch every stream

[@simoncorporation3]

I wouldn't feel safe driving this tray pulling tractor @ high speeds or on the road, but excellent farm option, this man knows how to fabricate.

[@bayukuslianto8129]

Hallo saya dari indonesia, , Sangat mengagumi semua karya karya mu, , Mantap sukses terus 😂😄

[@SouthWestIron]

Someone needs to snatch this natural engineer up and turn the UTV industry on its head! Excellent!

[@denniscook1422]

When I was in South Korea in 1980, this was a very common form of transportation for the locals.

[@jamesdean3432]

Yes, we Koreans call it a Gyeong woon gi (경운기). It is still commonly used in the countryside.

[@tristan6509]

this is a very common vehicle in almost every asian country in the countryside, each country has their own names but they're practically the same, although most of them uses a diesel tractor engine with a crank rather than a gasoline powered GX engine.

[@25Soupy]

This is a better farm vehicle than a $16,000 USD side-by-side.

[@xxgg]

One of few to be living off KZbin money. Awesome & Lucky. Especially for being where he is living.

[@Deleteitalready]

Tôi nghĩ rằng đây là điều tuyệt vời nhất mà bạn đã xây dựng. Tôi thích nó! Bạn là một người đàn ông rất thông minh, cảm ơn vì đã chia sẻ

[@ewhays]

I think you could register that in Tennessee. Just add brake lights, horn, turn signals, and an orange triangle and you could get agricultural tags.

[@25Soupy]

It appears in his country he doesn't have to as he's drving it down the road.

[@ewhays]

@@25Soupy I understand that, just commenting on how anything can get registered in Tennessee.

[@mottthehoople693]

@@25Soupy pity we are stuck with softcocks and lawyers otherwise we to could drive this on the road

[@شقاوه_تيوب]

我來自埃及，我喜歡這個視頻

[@Raul-pp1uh]

Mnie też się podoba. Wy tam w Egipcie to chyba na osiołku jeździcie.

[@شقاوه_تيوب]

@@Raul-pp1uh 你是什麼意思，呃騎驢，但是你是驢

[@شقاوه_تيوب]

@@Raul-pp1uh هوانت من العرب

[@Raul-pp1uh]

@@شقاوه_تيوب Mi chodziło,że takimi pojazdami zaprzęgniętymi w osły jeździcie: www.fotosearch.pl/fotografie-zdjecia/osio%C5%82-w%C3%B3z.html

[@alexandrsokolov1311]

Шикарно получилось! Малодец!

[@arrimon5066]

You are very good guy

[@304renegade]

This is a very cool build. I love how it eliminates steering, plus it would be fairly simple to add another engine to the rear axle to make it a 4x4, and if the center swiveled nicely it could make for some nice articulation. (Also I am very pleased to see that I am not the only person that say “f-it” and welds through the paint...lol)

[@landmark.]

Сделай брызговики, арку над колёсами и движок под капот будет👍

[@ilokozBuilt]

its interesting to see a smaller version of this design. We use this vehicle in the phillipines.For hauling everything from wood, rice bags, pigs, and manny more. 👍👍👍

[@totoybola1151]

the torque converter is doing great in this build. i saw in lazada 5,000php for the torque converter kit. i was wondering if the torque converter could also be used in smaller engine 49cc

[@randomvideosman938]

What are these vehicles called?

[@ivanperalta3848]

Quiero comprar un CTV ( convertidor ) aqui en Ecuador presio o si en mi pais venden

[@ivanperalta3848]

Es para adaptar a una turbina jet para empujar un bote de 7 mtr de largo y1.70 de ancho

[@JodBronson]

*Dang, he always get parts for free!* 😁👍

[@rajparmar3734]

Vechar thay che masin nu

[@TheGhosteyez]

Just needs some front mud guards and flaps and you can go full speed through those puddles

[@oafolow.youtube4245]

Very good Amazing

[@kumandertukmol7132]

This channel is the reason why I wanna make DIY vlogs. So inspiring!

[@timotoxic4664]

In my country, I can not put a vehicle like this on the road and got not a hell lot of trouble with the government, thats sad on one hand. But on the other hand life here is in some ways easier, but also less free and careless happy. Nice work dude, have fun and carry one!

[@simplydub]

This guy has everyone's dream horde

[@Михаил-1979]

Молодец, адекватно воспринял конструктивную критику.👍👍👍

[@nicoel.master9941]

- Для начала забери у людей право решать кто ты.@user-xq5vg2md4o - Один тебе скажет, что ты плохой, ты поверишь ему и расстроишься. Другой тебе скажет, что ты хороший, ты обрадуешься. Тебя хвалят или ругают, верят тебе или предают. Пока у них есть право решать кто ты, или какой ты, тебе не найти себя. Забери у них это право.

[@stefanobc1971]

This video smells like FREEDOM.

[@banadoomurtaza472]

It is like fridom

[@kikifelixx00]

sure it is

[@cakeeater7075]

Only in.... wherever this is. its probably america because it has a big engine either way.

[@imperialpresence3331]

i'm totally down with freedom...but imagine if people could drive whatever homemade car they pieced together on american streets...would you tolerate that thing barreling down the road near schools and parks?...or even dodging in and out of parking lots

[@dylanlivingston5024]

cake eater pretty sure he’s in China or Vietnam from the scenery

[@MuskratOutdoors]

Very well done! Now......if he could just make himself some shoes.....

[@iniyazka1986]

Нужно теперь добавить полный привод и поехать на оффроуд :)

[@paparaciya1]

По моему этот "ЛЕВША" работает по типу советского авто-прома, на глазок прилипил и вперёд!!

[@maxslayer3804]

А что за двигатель он ставит ? И где его взять ?😬

[@РомаПохереев]

ну ему же не для людей делать

[@пыщпыщков]

@@maxslayer3804 220 вольт там этих движков от 2до 19 лошадей.

[@jurikamyschanow6757]

Ни хрена, долго не поездит, синей изолентой кое что не обматал, и проволокой не прикрутил, а так ну прям 600тый мерин...

[@ЕвгенийНикитин-ъ8м]

Блин как быстро сломается? Именно сломается, оси или движок вывалится?

[@metalarteBUCARAMANGA]

Dios bendiga a todas aquellas personas que le dedican tiempo a enseñarnos las diversas áreas profesionales ,investigaciones ,manualidades en tutoriales

[@AridersLifeYT]

I find it strange that he wears a business shirt while he works on mechanics. but i like it!

[@carllarsen]

it's the sandals that get me

[@handonos]

It's asia, we wear anything we like anywhere, anytime.

[@hafixrcdude5857]

i think its only your contry..not asian..in singapore, anything you wanna do..safety come first..not style come first..

[@Tommysmess]

Next, remove the governor. It wont blow the engine since the torque converter will limit its revs around 5300 rpm. And the valve springs begin to float around 5500 rpms

[@GibbSaw63]

Yes, the governor is very annoying for direct throttle applications like a vehicle

[@jackboy2387]

I was just thinking in the last video, " ya know what would be cool? If he added headlights to that little thing". And he has delivered!

[@kerik2256]

i think he just was book led bar before

[@rajparmar3734]

Vechar thay che masin nu

[@BigBoyLies]

brake light, electric starter, rear brakes and you'll be golden!!

[@integrationofmanandmachine4714]

some fenders too

[@slavwillisalmera9692]

Now it at its perfection great job I only wish the engine could power the lights but the battery does the job and would get you home 👍👍

[@ibroughtaturbo-chargerfrom667]

Are you talking about a alternator?

[@slavwillisalmera9692]

@@ibroughtaturbo-chargerfrom667 yes an alternator or a charging coil would be the options available 👍 , another option but mabey won't give enough charge as needed would be a solar panel .

[@wolfmane8839]

The engine changes look due to the old engine had a gearbox built on it from the first video. That is my guess from what I seen. Very good work on Upgrade

[@chrislewis2262]

No gearbox on the other one just a centrifugal clutch

[@billyboots3730]

@@chrislewis2262 it had a gear reduction

[@kangnochanel6173]

Hello Vidio oke love❤️❤️❤️from Indonesia👍🏾👍🏾👍🏾

[@bluewatersaust]

Hi, Build a small 4x4 tractor for towing rv around the yard ,forward and reverse.... keep up the good projects......

[@robertobuenrostro2781]

I think you should add 2 from fenders & rear lights next. 🚜

[@ag6371]

We all appreciate your unique DIY vehicles from salvaged parts!

[@lemonhashberry5799]

Yeah... salvaged from his mailbox to his shelves

[@nelsonvidal4378]

:

[@nelsonvidal4378]

:

[@internet146]

Very cool! Maybe put a guard on the CVT belt.

[@rgbigdog]

When attaching the locking clip on a drive chain the open end of the clip should always face the opposite direction of the rotation of the chain.

[@sierrakilo1174]

May i ask why? I have a guess, but i would like confirmation if i am right

[@rgbigdog]

@@sierrakilo1174 If the chain is rotating and just by chance something come into contact with the chain at that clip it can push the clip off if the open end is facing the same direction as the rotation of the chain. Clip gone your chain is going to go flying off and may cause injury..

[@sierrakilo1174]

@@rgbigdog oh ok thank you for explaining

[@gregoryantoniou1827]

I’ve thought about making one to use with my small utility trailer, especially handy for out in the bush.

[@DavesShed]

This is brilliant! Makes me want to learn how to weld. I'd have a double U articulated joint to allow lateral movement. You have allowed for movement in 2 directions but not the axis in line with the vehicle.

[@tedhumphreys1473]

What the hell are you saying

[@hasanhama505]

اي

[@markmaxwell9892]

Yeah

[@MountainGuerrilla]

you don't want that because it would always be bent with the joint dragging on the ground

[@bryanrandom6382]

under the gas tank there is a separate spring for the governor, put a zip tie through it , then tip tie the spring were it doesn't spread out, and BOOM governor bypass. but dont blow your engine :)

[@РусланЗиидинов]

Ждём следующий видио,с установкой кабины,стартера,защитных крыльев.🛠🔩

[@adrianglennbionat]

Almost everything is brand spanking new and shiny. This guy doesn't fuck around.

[@wolffeast809]

how such a master can put dislike? the one who puts do it yourself.

[@bernardocenina3225]

You are the best my friend beautiful car

[@Bagoesbudianto]

Just need 2 tools A AC dynamo and rectifier to charger the batteray

[@koziol87]

FULL BRIDGE RECTIFIER! xD

[@emmanuelgeorge7199]

and a rear light

[@electronicasolorio2988]

And if very well said brother

[@spigolon100]

This guy is an absolute genius, I love it...

[@matteoc2696]

This man is the master of MacGyver.

[@websitedesigner7158]

Nice build Now upgrade it further add the following 1. Steering well ,replace the steering handle bars 2 a silencer to lower the engine noise 3 a button to start the engine instead of the rope 4 short absorbers for the wheels 5. breaking system (preferably to stop the rear wheels)

[@mohdyusof8195]

Anather 1... The mad guard..

[@gattonpc]

Make this 4x4 with a diferential on the trailer.. that will solve slipping in sloping hill under heavy load on the trailer.

[@electronic7979]

Excellent job. I like it

[@fatihcakir7062]

Do you love Turkey🇹🇷

[@aliabbaszade1849]

tukrey?

[@aliabbaszade1849]

pls pls pls pls

[@recepak7771]

Hadi gene iyisin bende bende doğuluyum

[@TomášPohodný]

With chestnut stuffing? Indeed.

[@MrBloodySerb]

You could add couple of cat eyes on the back if you are going to drive it at night. Mud protector with curtains would be nice also. Handbrake could be usefull.

[@vampiregirl32]

Maybe me and my brother will do for my dad geez he will love that a lot nothing to do just stay home together and I'm going crazy 🤪💯☠️🤪🤬

[@alabastardmasterson]

You could brush up on some grammar to pass the time

[@mukeshpichkiya9445]

It's very noisy it may be cause noise pollution.by the you making these types of vehicles are very beautiful and amazing

[@stevesoutdoorworld4340]

Very cool love it!

[@millionstories7]

قسم بالله انه مبدع وفنان 👍👍👍 كفووووو

[@beancogiesbrecht7059]

Love this video but why replacing the engine, from my understanding its the same hp. Keep it up, great work

[@bernardoernst624]

I make myself the same question. I also loved the video.

[@fabianradakovitz9064]

Probably more torque

[@beancogiesbrecht7059]

@@fabianradakovitz9064 maybe, but i don't think so

[@maheeshaswarnanimna7403]

Old one has a buit in gear box i think

[@russellmeier9526]

from a 169cc, 6.5 HP, to a 196cc, about 8 HP

[@fellipec]

I love that the guy has a nice jeans and shirt and drove into mud with no kind of mudguard.

[@aakashmemon9953]

Great job youre about to win

[@shaikahmed6580]

Super bro iam your fan

[@barrybowden5778]

Not seen one of these before. But this would fit a need I have on my homestead.

[@amanbhawsar8221]

I love Japan🇯🇵 and India🇮🇳 😘😘😍

[@ahmedmalik2186]

Me and the boys going to a party

[@timi6050]

yoo dude that would be sick

[@RCAFpolarexpress]

Good day Sir, 👍You are a pur Genius !!! 🧐😉👍

[@usataya_raketa]

Упоры дня ног надо от проскальзывания.

[@ВикторБугаев-э2ц]

Он наверно ногами помогает поворачивать!

[@bgmedia4199]

Awesome upgrade my friend put some back lights on it just on the safe side

[@mauro334]

Central junction is gonna bend sooner or later...

[@dancurrier374]

Very good work indeed. Please ware safety glasses boots.

[@lenylv2840]

at the next time，you can give lens close-up in CVT，we can know how CVT works

[@vampiregirl32]

I totally agree with you 💯 % on that

[@russellmeier9526]

it's basically the simplest form of torque converter. as it spins faster, the "wheels " are forced closer, causing friction to the belt.

[@missingland3560]

@@russellmeier9526 Where find this cvt gearbox for Loncin 196cc?

[@Tom-zq7lu]

Ohhhhhhh wow, fantastic and very very FANTASTIC and very very best ok ✔️👈💯🤗👍🆗

[@transformationproject3583]

Love it. I'm making it. Kinda looking at it wondering on putting an engine in rear for 4wd? See what I come up with.

[@jonathandehaan1386]

You should post it on youtube when its finished, ima subscribe so i dont forget😃

[@keithameerali9474]

That pivot point at the front should have needle bearings for longevity.

[@koziol87]

at least he didn't fin LED's on any bench xD

[@Blinker_Fluid_Supply]

I am surprised he didn't 😁

[@dennywildann86]

kan maen hebat betul from Indonesian

[@jessiebrown6112]

Weld that galvanized steel. Build it all out of it. Have a headache after that?

[@Ponyodayo177]

next steering wheel, suspensions, indicators 👍

[@shawniebeans8382]

19:38 was that someone standing in thier birthday suit.?😅

[@johnsherby9130]

ShawnieBeans 😂 wtf is my guy doing

[@johnsherby9130]

Joe Anthony and how do you know this

[@leejones3155]

That was his neighbor yelling "you get back here and f*** my wife" (the other guys reference) 😂😂

[@InvidiousIgnoramus]

@@johnsherby9130 Probably with his eyes. It's not even hard to see he has clothes on.

[@bobvel7760]

Lolz. Looks like he was covering his already tiny pecker with his hand so yeah, I think he was in the buff.

[@rydoggo]

Imagine upgrading this to a 420cc predator. It would become a beast compared to what it is already.

[@Hancetanisan]

CVT Gearbox..where to buy?? which online store you buy

[@thetwoamere3679]

Put front suspension and fender + indicator lights and it was sick! 👍

[@frenkicekaj8134]

0:01 me and the boys going to a party

[@rydoggo]

Me and the bois on the way to the flea market.

[@jhoenalcabico9362]

DIY BASKETBALL RETURN SYSTEM PLS FOR YOU NEXT PROJECT. IM A BALLER AND A FAN OF YOUR WORKS. 🙏🙏🇵🇭

[@baianobiel]

Caraca quase bate no maluco de moto kkkkkkk 17:36

[@mohammadfaakhir1908]

who likes CREATIVE CHANNEL like this

[@hibayraktar]

17:36 there could be an accident. Be carefull.

[@mrMacGoover]

I think a geared transmission would be better for something intended for agricultural use, that way you can get high r.p.m's on the engine in lower gears resulting in high torque output, great for climbing hills with heavy loads.

[@АлександрЧенакин-м5я]

Цепь слабовата, а значит нужен натяжитель. В общем долго не протянет

[@valeriolapara5599]

A manual work, fantastic ... but working with flip flops and crazy, at least a pair of shoes