Upgrading to a Turbosmart Kompact Diverter Valve [Mad Turbo Sounds Compilation]

[@lukestevo4054]

Best car youtuber for mx5,s man

[@nathan1922]

best youtuber in general*

[@rob249]

No doubt. Super informative.

[@uniden03229]

You misspelt best car youtuber.

[@geekyant-onecargarage9182]

As someone who also films their Miata, agreed. Greg is stupid awesome with his videos and i always come away feeling entertained and a little bit smarter.

[@uniden03229]

Tbh as someone who never has and has no real ambition to ever own a miata. I fucking love his videos.

[@DrifterDavid]

Man I was so freaked out the first time I heard mine. I had to pull over and make sure my vacuum line was connected. Sounds amazing though!

[@TomsTurboGarage]

Love it Greg, sounds so good! 👍🏻. Oh and your face near the end when the forklift is messing up your outro... that was too real for me 😁 feel like I’ve been there every single time I try to record something outside of the garage.

[@MidnightMiata]

Even my heart started racing when the SDPD Explorer clip started lol. Also, you're a terrible influence haha. I bought another Miata after I sold my last one, and decided to build the 1.6 in it, and now I want to use the EFR 6258 in mine, thanks so much for all the videos. Let us know if you decide to make the trip to MATG a regular thing! Because I'd be more than happy to let you drive my Miata once the built engine is done!

[@FiveFiveGarage]

I was going to ask about the spring difference between stock and the Turbosmart. My Mazdaspeed 3 uses a recirc valve I noticed a smoother response when i went to a stiffer spring setup. Damn Greg you are going to entice me into getting an EFR turbo for my build! The Luck fairy was with you for sure at the end!

[@businessman2085]

the realest youtuber out there

[@224rebels]

8:19 I can't believe you got gapped by that traverse 😵

[@nicolas6820]

Dude, there are serious high boost cars out there running for years w/o a bov and fluttering the s**t outta the turbo without any problem. VVT rocketship sounds better than ever, keep it up man, you rock youtube!

[@scotturich]

Thanks so much Greg for taking a chance a getting some more great footage but don’t do us any favors and get your car taken away, You always bring great content and if something is missing no worries.

[@redlineriders2695]

Doing a motor swap in my nb2 atm and this channel has helped me so much, thanks for making killer vids

[@Duke2387]

Turbosmart has a much deeper, throatier chatter/flutter, soooooo meaty sounding! Amazing difference.

[@benjamindavidson632]

Recirc for the win. I recirc all my builds but I did start with vag cars which is standard so I may be biased and the flutter is a cool sound and never had an issue. Even a stock vag car with an intake will flutter a bit.

[@casselc9]

dude car tax says your supposed to downgrade bro feds are coming

[@kingbryant5673]

Well I listen to the video on my way home from work but now that I'm actually home from work it's time to watch it

[@hairpinperformance3926]

Love the flutter. I played with bov so I could get the flutter with 8psi or less and when I hit full beans at 12psi I'll get the whoosh sound. It has been the best of both worlds.

[@Van_wints]

You did a really good job explaining it. I definitely learned something new. I didn't even know recircs on a turbohousing were stock/existed. I only have experience with garrets and precisions. If anyone is confused about how this works they don't have enough background info to be talking about turbos yet to begin with. Lol sorry kids gotta crawl before you can walk.

[@christianthresher195]

That thing sounds legit! Part of the reason I chose the EFR was because I wouldn’t need a BOV. Now I want to buy this lol

[@JonahAberle]

MATG this year was dope. Thanks for signing my hood!

[@MarioGarcia-fc8cz]

The og is back !!

[@willthacker5182]

The main purpose of a recirculation valve vs a atmospheric bov, is to one, avoid compressor surge during rapid TB closure under boost, but also on MAF cars, to avoid dumping already metered air into the atmosphere, thus avoiding a momentary rich condition.

[@VS666]

7:10 HOLY SHIT THANK YOU SO MUCH FOR POINTING THIS OUT! I could not for the life of me figure out what that noise was! Do I need to lube up my BOV piston or change stiffness settings? My China BOV makes this noise haha

[@mgamma5001]

The oh no sphincter moment and relief for sure. Cool work as always keep it up G.

[@jonathanblanco2983]

“Now lets get past the tortilla and into the el pastor of this taco”😂😂😂

[@paulharrington94]

Great video! New knew how those valves on the housing quite worked.

[@FluxReact]

Excited to see you at Miatas at the Gap!

[@jipidou21]

Man i love that outro beat, it fits so well 😍 as always, great video 🤘

[@markstorer7204]

quality addition for anyone running recirc turbo 👍

[@RobWhittlestone]

Cool explanation Greg! And that valve really is smart! All the best, Rob (2009 NC 2.0l Sport)

[@brandonmckibben1164]

Every time I watch your videos I want to go find a Miata and do fun stuff. Keep up the good work!

[@9879tito]

I used a synapse engineering diverter valve on my mazdaspeed 3 2.3 turbo and I would probably use it on my miata motor next. It has a very quick acting spring and no flutter at all. I changed spring out once in 8yrs and that was running a large turbo with 18psi making 385whp

[@MiataMods]

You just needed an excuse to share these awesome sounds clips didn’t you? I’m not complaining tho 😆

[@MarioGarcia-fc8cz]

The man must love his hot sauce

[@SmukKully]

That’s commitment and love for the motor to still take it out when ur not supposed too.. haha. Love it! May have to get me one of these turbo smart valves 👍

[@turbotprobed4373]

Thanks for the comparison, now you gotta get it legal :D

[@musnireggie]

I'm looking at the sound. Looks good!

[@Thepursuitofomar]

Bird whistle sounds more like old swing at old haunted park, or deebos bike lmao!!

[@TheCarPassionChannel]

😂😂

[@icanturn6844]

dude. You got so lucky with that cop. sheesh. Also, no coupon code :( I need one of these for my car.

[@PANTYEATR1]

great footage bro 💪

[@SavageMotoring]

Tap my uncle on the shoulder, call that Tapatio.

[@theodorecarttar454]

That is the sound of DREAMS

[@windsorx]

Greg: I just got a ticket and have to return my car to stock Also Greg: I’m upgrading my turbo! Cause fuck California

[@TheTightShirts]

We need more "after credit" scenes in the future videos :p

[@walkersway3981]

I see you hard shifting with a rag over the broken shifter, respect 💪😅

[@TheCarPassionChannel]

Just out here trying to not hit an artery on the 3-4 shift

[@epsimega1]

lol my EFR did bird whistles too. I eventually went with the turbosmart dual port. Fun noises but still nowhere near as loud as your typical "on pipe" blow off valve. Who knows I might add a second valve :).

[@gizumoauto]

You made me laugh so hard at the end there! That's a close call!

[@federicocunningham9686]

Im your number 1 fan

[@NippyMoto]

Yo when we getting this canyon video dawg

[@TheCarPassionChannel]

It's cominggg all the editing is being done by the media crew as well, but whenever it's ready it's getting dropped!!

[@loganh2876]

literally the miata god

[@christopher-watchman]

Great content... not that I will be boosting my Miata anytime soon... or will I?!? Life’s many mysteries.

[@anthonygreco9821]

Awesome video! But I have a question what's the little trunk lip spoiler thing you got on your Miata I think it looks really cool and definitely want one for mine. Please if someone could let me know thank you.

[@bingoberra18]

So basically the diverter valve is supposed to give you a better transient response than an open BOV? Is that something you notice? Or is it just a compact way of solving the problem? Because OEM and closed system BOVs are routed in the same manner, the outlet of the BOV is exiting pre-turbo. I am reluctant to think the divertervalve makes a huge difference in response time compared to an open BOV, but if someone can show a test of both that would be very interesting. What I basically want to know is if a turbo mounted diverter valve is a game changer compared to a turbo that does not provide that.

[@Epiphonech]

Instead of whistling I've got a lazy bear/cow sound off my SAAB BOV at highway cruize speed XD

[@dizzyrider3883]

The state should create a special exemption for your car.

[@Girz0r]

2:47 - Is it just my eyes or is your BOV reference hose cracked or shredded up with holes?

[@TheCarPassionChannel]

A smudge in the dust, haha 😂

[@mr.adventure559]

Another reason for me to use a Borg Warner turbo over the Garrett.

[@anthonytortorella3237]

Just subscribed to your channel! Looks like lots of great content! I have been trying to build my knowledge for the EFR line. Do you have any videos with content about the EFR?

[@farmer3242]

At 5psi the turbo smart wasn't activating it was dosing, but you already know that lol

[@bluesrike]

Does Turbosmart have a recirc valve that works well with some of Borg-Warner's bigger turbos?

[@nicj15]

Greg plz get that manifold ceramic coated it looks like such a turd in an otherwise beautiful engine bay

[@roby46tm]

I love your videos and i finally got a miata thanks to you! How did you make the rpm tacho like that? i want it too :o

[@fakename287]

Check out the gauges from RevLimiter, this guy has a video on them if you wanna see how he installed them

[@roby46tm]

@@fakename287 sorta remembered about that video. Imma check it out again

[@jeffarcand6536]

How are you using the speed sensor on the turbo? Does it help you with tuning or is it just used to see how fast the compressor wheel is spinning?

[@TheCarPassionChannel]

I haven't hooked it up still :/ needs a conversion box for the signal and I just haven't gotten around to it. It mostly helps with seeing where on the compressor map you're running your turbo at, I'm really interested in the seeing as this turbo is pretty much maxed out

[@pontiacg445]

@@TheCarPassionChannel If you wanted to hook something up hella janky just to see what it says once or twice you could use a teensy microcontroller, a BSS138 5 to 3.3v level translator, and that's pretty much it. Look up FreqMeasureMulti library, load up the stock example and it'll measure to frequency. Use the EFR guide to convert back to RPM.

[@Shadowfax2121]

Hey Greg, what elbow and filter are you using? Did you have it custom fab? My stock re-circulation valve has the vacuum hose hit the filter leaving almost no spare room so I don't think I can run this valve as-is but I'm interested in it. #EFRclub #450hp

[@dizzyrider3883]

I don’t know if this is the time to be making even more turbo noise.

[@distortedfox6561]

Do you have a boost hose that attaches to the nipple on the bov

[@lindkvistandreas]

Hey Greg, did the softer spring sort some of that flutter ? (flutter sounds awesome, even if it is told to be straining the turbo a bit like you mentioned).. and the driveability-thing you explained makes it sound like the stock one was too efficient so the boost would be coming off and on to sharply, affecting smoothness.. is that how you ment, can that be sorted in the mapping ?

[@TheCarPassionChannel]

The softer spring reduced flutter but is still much stiffer than stock. The clips in the end was the stock valve against the softer Turbosmart spring

[@MisterS4League]

Is it necessary to ajust my tune after i switch the orginal borgwarner bov to the turbosmart bov?

[@itspopsik4423]

You are the luckiest I swear 😂

[@boblast5582]

can you ask turbosmart if they wanna sponsor my build too? :D

[@skyline626]

Hello! what is the diameter of the silicone pipe?

[@HooverTuber]

Are recircs or bovs even necessary? I’ve never run a bov, love the flutter too much 😄

[@Seandoestech]

Hoover on Cars I’ve never run them.

[@TeejtheDeej]

No not really necessary. They are more designed for response and driveability. Turbo life is directly linked to oil and turbo supply to cool and lubricate the center housing.

[@anthonyntran88]

I noticed you put in the stiffer spring(orange) not the softer spring(blue) in the video.

[@TheCarPassionChannel]

I ended up switching back to the softer one later

[@anthonyntran88]

@@TheCarPassionChannel was the sound clip with softer spring or stiff spring ?

[@mcsalt55]

Hopefully see you at the gap!😁😁

[@dil6969]

I hate that whistle noise every time I hear it on a turbo engine, aftermarket or otherwise. Nice to know a potential solution if I come across it in the future. Side Note: I don't know if it's just me, but it feels like my car is invisible to cops, in spite of being bright red and loud, just like yours. I guess most of them figure: eh, it's a Miata, he's probably only got enough power to spin one tire anyway. Little do they know the spicy Tapatío you have under the hood.

[@TheCarPassionChannel]

Yeah I've only been pulled over once before, in a span of 6+ years (for speeding, caught on radar) In my Z32 I think I was pulled over 8-10 times in the same amount of time

[@ameerahmad1115]

Nice Intro

[@benlastname8270]

9:28 my ears are pleased

[@poseidonasas]

Creg @carpassionchannel . I changed also to a turbosmart kompact , but under partial throttle ( cruising) the valve wheezes like hell. Although mine is a dual port and it vents some in the atmosphere.

[@TheCarPassionChannel]

Sounds like you need a stiffer spring!

[@poseidonasas]

@@TheCarPassionChannel the valve is adjustable... but if I turn it clockwise it starts deflecting too much air on the impeler of the compressor at vacuum which is bit ricey...

[@alejandrojaimes4228]

Como se llama esa válvula que ase sonido en especeal

[@marquelmarshall6690]

can you connect the nipple to the turbo charge pipe?

[@TheCarPassionChannel]

@@marquelmarshall6690 Recirc/BOV reference always needs to be connected to a vacuum source, post throttle body. Not the intercooler piping

[@thepilotmaster777]

Hey Gregg. What turbo kit did you get? Is it the flyin miata kit?

[@TheCarPassionChannel]

It's pretty much full DIY. The manifold, downpipe, and full exhaust are from Artech Fabrication

[@cartertufts0401]

Paint it black and call it Darby Vader cause that wheeze is EVIL

[@johnsumrall6310]

RIP that valve cover, my wrinkle black did the same thing after about a year:/

[@johnmurraycompton569]

So much pssh-fdr, pssh-fdr! I just creamed my pants

[@RFrancisName]

The spring on the new valve is too heavy you are getting surge.

[@TheCarPassionChannel]

Ur surge

[@Gn0m4]

@@TheCarPassionChannel IsTurbosmart selling any softer spring to avoid surge? I´m sure there is a reason why BorgWarner put that hypersofter rubber.

[@cristianespinosa9820]

Is it a build engine? From what year miata is that engine??

[@TheCarPassionChannel]

Built bottom end, 2001 engine

[@DeffectiveMirrors]

Can broke and boosted still come out since it doesn’t have a ticket?

[@TheCarPassionChannel]

Sure, via whoever owns it now 🙃 sold it about 3 years ago!

[@DeffectiveMirrors]

TheCarPassionChannel fuck I just remembered. Damn man that is some shitty luck. I drive with no front plate in NY. Got pulled over once and I was sweating. Luckily I was let go

[@samfitburr]

11:10 was funny

[@swagmasternuggies4855]

What engine do you have in your mx5?

[@mathiasmang848]

1.9 vvt from an nb miata

[@JonBlanton]

♥️

[@noa1001]

please show us how to sr20 swap a mx5

[@GTFour]

Which EFR is this?

[@TheCarPassionChannel]

6258, T25, .64 a/r, IWG

[@GTFour]

@@TheCarPassionChannel Great turbo, any reason you went for the T25 instead of the divided T4 twinscroll?

[@TheCarPassionChannel]

@@GTFour A little smaller packaging, and the single has a .64 a/r option where the twin only has .80. Might be negated by having a twin scroll housing, I'm not sure. This thing spools insanely fast, I'd be worried it might surge if it spooled up any quicker, the car makes 300wtq @ 3700rpm and has crazy transient response; speaking in terms of Miata motors at least. I'm 100% satisfied with the turbo, they're great. Plus, 6758 is 4 nuts away and it can flow another 80hp 😄

[@PowellMoore]

Turbo flutter all day

[@mixalisstathis274]

Auto-Blip! Auto-Blip! Auto-Blip! Do the Cable-2-DBW-Conversion! Pleeeeeeease!

[@Kane-O-Mansfield]

That is the second dirtiest Air filter in Hakkaido Japan...

[@dang3114]

You pay that ticket yet? UPDATES ON YOUR ILLEGAL CAR BRO!!!!

[@dizzyrider3883]

So take it you’re just going to pay the fine.

[@DimZin]

Science

[@ricepony33]

But does it recirculate NOS?

[@idriwzrd]

Hopefully you don't get any Tapatio on your Turbosmrt shirt. Wait, are you allowed to drive that car on the street?

[@niel80]

Stock sounds cooler

[@eduardomargutti]

14:53 Dude, now that you got your clips, go back a home a burry the miata, dont risk it getting towed