Рет қаралды 5,898
I demonstrate how to measure the boost your Corrado G60 G-ladder supercharger is producing by utilizing the onboard Volkswagen MFA these cars were equipped with.
To activate the MFA boost-test readout:
1. Turn on the ignition
2. Turn MFA to position "2"
3. Hold in button at end of stalk
4. Turn off the ignition
5. Start engine
6. Release button at end of stalk
7. Press button at end of stalk once
NOTES:
The test is best done in 3rd or 4th gear at redline (6200rpm).
MFA = PSI
200 = -23.7
400 = -17.8
600 = -11.9
800 = -5.9
1000 = 0 (Atmospheric pressure)
1200 = 2.9 (Major boost leak)
1400 = 5.8 (Charger is in poor condition)
1600 = 8.7 (Charger would benefit from new apex strips)
1800 = 11.6 (Good for stock pulley)
2000 = 14.5 (Good for 68mm pulley on stock charger)
2200 = 17.4 (Good for 68mm pulley on heavily ported charger)