single cab Silverado v6 to v8 swap part 3. Will it start? the dramas Edited by VideoGuru:videoguru.page.link/Best
Пікірлер: 28
@chevelleranch7481 Жыл бұрын
Always good to watch you and your projects!
@choppedinc. Жыл бұрын
Thank you. I appreciate the support and all the comments
@cameronreeves8965 Жыл бұрын
Keep it up man! Love the content
@choppedinc. Жыл бұрын
Thank you, appreciate the support. Definitely have some bigger projects in the pipeline.
@lyndonstewart6351 Жыл бұрын
Great job thumbs 👍
@choppedinc. Жыл бұрын
Thank you
@kennethnewman1055 Жыл бұрын
Awesome
@choppedinc. Жыл бұрын
Thank you , almost done
@subarutime50898 ай бұрын
Cheap skate 😂 i would clean the windows and then dry the paper towels to reuse them 😅
@imswyft41446 ай бұрын
Did you reuse the stock clutch slave cylinder From the nv3500?
@choppedinc.6 ай бұрын
Yes I did. It worked fine. Just replaced the throw out bearing.
@unpenitrible3 ай бұрын
What did you have to do as far as fuel line connections ?
@choppedinc.3 ай бұрын
I used the ones from the v8 truck but you can buy just the quick connect fitting that go on the rail ends online aswell
@intrakitshunmurda47907 ай бұрын
So motor bolted up to the manual transmission without changing bell house? I’ve got a 2000 Silverado 4x4 that I want to convert to a v8
@choppedinc.7 ай бұрын
Yes bolting up is fine. Just need to make sure you have the flywheel and clutch from a 4.8 manual transmission. I got the clutch and flywheel of ebay as one purchase. Also need a thrust bearing for the crank aswell. I used arp flywheel and clutch bolts. Fairly cheap on ebay
@intrakitshunmurda47907 ай бұрын
Thrust bearing must be installed? Doesn’t the 5.3 gen 3 already have some?
@Analista-ve4us6 ай бұрын
bro, im currently doing this swap, do i need to get the 4l60 harness to work on my 5 speed?
@choppedinc.6 ай бұрын
No you don't, any harness will work. Just need the computer to be flashed for the combination you are doing.
@Analista-ve4us6 ай бұрын
@@choppedinc. thanks for reply homie!!!
@1lejonny44411 ай бұрын
how did you get the speedometer and the fuel gauge to work after the swap ?
@choppedinc.11 ай бұрын
Should work with the original harness. As long as it's the same year it will all plug in
@JSm-pg9uv2 ай бұрын
Im currently doing the same swap you have a parts list where you purchased?
@choppedinc.2 ай бұрын
I got everything from ebay. When you order parts make sure it's for a 4.8 manual
@transactionmanage7317 Жыл бұрын
Did you use an auto ecu? Or did you already have one tuned???
@choppedinc. Жыл бұрын
I used a auto ecu with vats delete and tuned for the manual transmission. There is a few places on ebay that will do it cheap.
@jaimeayala66596 ай бұрын
Can you share where did you get the ecu ?
@imswyft41447 ай бұрын
What part number are the arp bolts
@choppedinc.7 ай бұрын
I just looked on ebay. Seamed to be the cheapest place around