VAGsuite remaps - boost limiters

[@Domnaek]

I think you are the only channel that properly explains everything in VagSuite, seriuosly keep the videos coming!!

[@vPerformance]

+Domnaek well try to keep it up. We've started putting info on the website too. More to come!

[@MrAranhaman]

This channel deserves more than 14000 subs...keep up the good work

[@vPerformance]

Thank you. We're trying to produce videos which are entertaining and useful.

[@Vo0d0o2009]

i think i just beginning to be amazed by the discovery of software tuning , i feel like old time when dishnetwork was softmodable . thanks a lot 1!

[@79RockShox]

Used this years ago and having to revisit, working in IT i've forgtten alot of the tricks of the software, that and getting older lol, thanks for posting these mate, much useful.

[@jakubdugiewicz1506]

Bro keep doing what You doing right here! Hope You're going to up here some new tutorials with next important parameters like injection angle or injection pressure. Can't wait! Cheers

[@ahmirjaxen9480]

you probably dont care at all but does someone know a tool to get back into an instagram account..? I somehow forgot my password. I would love any help you can offer me

[@bentonjoseph6546]

@Ahmir Jaxen instablaster =)

[@ahmirjaxen9480]

@Benton Joseph thanks so much for your reply. I found the site thru google and Im trying it out now. I see it takes a while so I will get back to you later when my account password hopefully is recovered.

[@ahmirjaxen9480]

@Benton Joseph It did the trick and I actually got access to my account again. I'm so happy! Thank you so much, you really help me out :D

[@bentonjoseph6546]

@Ahmir Jaxen You are welcome xD

[@PantheMic]

More of this please! :-)

[@grahamek86]

Boost limiter description was bang on, but it seemed to digress off to smoke limiters for some reason. When setting a boost limiter on a modified file, it's always worth adding another 50-100mbar to the limiter. The standard boost PID maps aren't tuned for that type of target, so it's easy on a TDI to have an overboost. A higher limiter will prevent limp mode and boost pressure oscillations and random puffs of smoke during peak boost that I seem to see far too often on poorly mapped TDIs.

[@NerffPlys]

I've just started using VAGSUITE and manged to map in launch control (For show) and EGR Delete ... It would be nice to start learning about IQ and SOI ... and the sort of safe values ;) Yeah I vouch for this would be a nice series to have.

[@vPerformance]

+NerffPlys I'll make sure another one is up next week then :)

[@vPerformance]

+UsableKnowledge I used MPPS and a cloned tool (cheap ebay version)

[@NerffPlys]

+UsableKnowledge Clone MPPS lead for me also.. and only works on Diesels

[@NerffPlys]

The software only work's on the diesels, far as I'm aware anyway.. sorry didn't really detail that comment properly

[@ruinman8722]

You should make more videos like this, it would be awesome!

[@SayWhaaaaaaaaaaaaaaaaaaaaaaat]

Hi thanks for videos. you MUST do as much as possible videos on this topic :)

[@Owenknut1998]

I would like to see more of your remapping

[@Blandy929]

Any chance of a start to finish 1.9tdi PD tune video? ;) Well explained and the way hex should be explained, basic.

[@16vastraturbo]

yes more videos plz on remapping.

[@stevenjsherwood]

ok mate i have a passat 130 tdi and just ordered the mpps cable, can you make a video of what to start out with editing the map, fuel, boost, torque limiter. I dont mind it i break anything either.

[@lim592]

when will you post more about vagsuite?

[@ThePhonecat]

need more videos mate!!

[@jons6125]

Yes more please

[@frunzoiu]

Do a natural aspirated remap

[@GamingModzDOTtk]

any videos on how to do a hard cut limiter?

[@bendoherty7721]

How do you change the colours on the graph?

[@DomenStropnik]

what do i need to connect my laptop to the car, for me to use the program?

[@antovrbat9946]

Excellent video! Can you upload video about "activate control" in vagedc

[@tommyltb]

Hey man! Love your videos! I wanted to ask a dummie question. I just started to learn about this whole tuning/modifying business, and was wondering if I can download my map from my car with a KESS V2 and use VAGsuite to modify the map and rewrite my ecu using KESS again? Or do I need to use their software,ECM titanium?

[@IIISUDDENIII]

Hey man, hope you are well, I am having the same question. Did you figure it out? Greetings

[@arnaudlecomte4381]

Thank you heaps !

[@Xvc2345]

Hi mate, is it possible to remove the DPf with this software?

[@lukeodonnell2974]

Only thing I don't know how to do is actually extract the map from my ECU and flash the new map to my ECU?

[@DanielJackson79]

whats the idea remap for my pd130 golf GTTDI

[@warwickdean]

appreciate your help on this, so far I have changed the torque map and smoke map. The restrictive factor left over seems to be the SOI and duration maps? do you know if vagsuite can edit the value data? I.e can I add 55mg column in there? or is it winols only job? thanks

[@GRAAmusic]

if i request more fuel, does that advance injection timing to end injection at the normal eoi?

[@carsareeasiertounderstandt6168]

Hey guys nice vid. Im just starting off in this subject regarding ecu remapping. I got a lil project car yet have struggle with how to know where the limit is to set the values. Im watching few vids atm to understand what to be careful on but yea. I need alot of help. Itd be really appreciated. Thanks in advantage

[@Systematicperformancecentre]

how do i download this

[@cammack2k8]

Wanting to know how to get my car smoking and lower my boost as i get about 28psi from a standard pd130 turbo

[@andrewwright.]

nice video

[@ZombiesKillerful]

where and how do I get the softwear ?

[@kochobass]

Hey! Thumbs up for this VLOG! I love DIY stuff and will buy a MPPS clone cable and try it out with my A6 C7 avant 2012 2.0 TDI... do you maybe know if VAGSUITE is compatible with this make/engine? tnx mate & keep up the good work!

[@rustfriendly842]

Hi! I`m just getting into this, can anyone tell me what hardware do I need to do stuff like this? I have a laptop, vcds and Hex cable. Do I need anything more, other than VAGSuite? Thanks for replies

[@mjordz4138]

hey would you be able to upload a ecu file that i can use just to play around with the software

[@allenmalave2651]

when I load maps on VAG EDC15P+ Suite it does not recognize the maps so I don't have any recognized Maps it just gives me a bunch of numbers

[@vPerformance]

The software is like twenty years old. What car did the maps come from?

[@allenmalave2651]

@@vPerformance 2004 Audi A4 1.8t is there a new software that I could use?

[@allenmalave2651]

@@vPerformance is there a new software that I could use?

[@stefancakic5293]

Good day, I installed this program , but when I open the map, it doesn't say Torque limiter or Injection pressure on the left, but only 2D and numbers as well as 3D and numbers, do you know why? Thanks for your reply.

[@vPerformance]

Those are maps which aren't recognised by the software. They might be something for the ecu to use, but you need to experiment manually. Extensively.

[@stefancakic5293]

@@vPerformance Okay, thank you very much

[@maximilianobottino9408]

I DOWNLOADED THE SOFTWARE BUT MY VAGEDC ONLY SHOWS 3D AND 2D OPTION ON THE LEFT HAND AND NOT LIKE YOURS WHERE IT SHOWS BOOST, EGR, FUEL AND ALL THOSE DESCRIPTIONS. IM RUNNING VAGEDC AS AN ADMINISTRATOR AND STILL DOES NOT GIVE ME A DESCRIPTION OF THE MAPS ANY IDEAS?

[@vPerformance]

What vehicle map have you loaded in? It does auto-detection of maps but it doesn't work for all cars.

[@maximilianobottino9408]

i loaded an audi and, and a bmw and none of the the showed the discriptions

[@boogaloojordan823]

vPerformance how would you download the file from your car?

[@banzaituner]

Correkt vag Suite the checksumme automatic?

[@vPerformance]

+banzaituner VAGsuite does automatic checksum. Yes. I'll cover this in another video.

[@ditasoft]

Vagsutie does not recognise any maps when i open my cars ecu file? any idea why ?

[@vPerformance]

It only works for some cars - what type are you opening?

[@ditasoft]

A4 B6 1.8t20v the ECU is a Bosch ME7.5

[@cornelb.9929]

@@vPerformance can it work on NA petrol engines such as vw AUB engine ?

[@quattronation7094]

hi bro can you please assist me with my MPPSv16 cable i recently flashed a Mk5 Gti 2.0T with a file and i don't like the file so i'm trying to re-flash the car but now the MPPS software wont connect it says 'Ecu Not Found' i tried it in slow mode and i tried everything. I'm stumped and any advice would help! please i will even pay. Also is there any bench harness for Me9.5? thank you sir. hope to hear from you asap.

[@quattronation7094]

+Kevin Watson Mk5 was from 2006-2008

[@emredagyaran7494]

does vagsuite correct checksums automatic?

[@NerffPlys]

+emre dagyaran It allows you to do checksums after modifying a file which will tell you if its good or bad.

[@vPerformance]

+emre dagyaran VAGsuite does automatic checksum. Yes. I'll cover this in another video.

[@emredagyaran7494]

+NerffPlys +V110 Thx all for your response

[@Actyr]

Yeeee runescape

[@mehdiremidi8632]

if anyone here has a golf mk5 TDI 2.0 dsg or knows how to properly do this on said car please comment

[@ivan48211]

Can you please tune my car if i send you .ori file i am afraid to fuck something up?