What size vane do you recommend for 3-D ? I’m setting up a new bow and want the best Tac vane for my target bow .
@the4thamigo2 жыл бұрын
Omg finally. Some1 covers this problem. But getting enough helical. Nightmare
@EDHBowman2 жыл бұрын
Yessss.
@stormchasevideo11 ай бұрын
I’ve tried to like these vanes but, most recently, bought a 100pk to fletch a dozen arrows. Out of that dozen, was only able to get a half dozen fletched using VMP and these tac vanes before running out of vanes. Have tried tac glue, fletching glue, and even gorilla glue with minimal luck. Tried this method, as well, and still have on avg about 1 vane sticking for every 5 that don’t. Canes have been primed. Have tried this method. Have done everything I can except to stop using them. At this point, I’ll likely just stick with bohning.
@jordanharrop46907 ай бұрын
If you use TAC primer pen and TAC glue they stick as well or better than any vane out there. They will not stick if you dont use both primer pen and glue
@tacvanes2 жыл бұрын
Do you have any fletching tricks that you do? Share them below!
@hoganfan2006 Жыл бұрын
Generally, my strategy is “paralysis by analysis.”
@dgriffith19 Жыл бұрын
The problem the middle never sticks, love the vanes but there's no way we should be having these issues with non sticking at the price of the vanes & glue kit
@tacvanes Жыл бұрын
If the vane is primed, glued and fully seated within 15 seconds, they will stick permanently every time. If the vane does not get FULLY seated, the glue will not cure because cyanoacrylate glue only cures on the absence of oxygen.