There is no difference between the super chargers wet vs dry sump. However, you are exactly correct about the snout difference. You can swap the snout to have the right belt alignment; however, GM does not sell it independently. The bricks were changed to improve airflow as the earlier flat supercharger had heat problems. The newer blower does much better with cooling and circulation. Great video to show the differences.
@Michaelhiguera503 жыл бұрын
Where can i get this swap snout???
@thegenrl Жыл бұрын
hi can you convert an L83 to use a short snout supercharger (from corvette)?
@prallstar425 жыл бұрын
I mated l86 to '16 vette s/c. Pulley problem solved by ADM Performance. They offer a hub and 3 different sized pulleys compatible with same hub.
@mannymix12745 жыл бұрын
prallstar42 would love to have one on my 2017 Silverado 6.2
@YvonDex4 жыл бұрын
prallstar42 I needed this info. Thanks
@eledgar64363 жыл бұрын
do you knw the part number of the pulley you use bro?
@Farmer12773 жыл бұрын
@@eledgar6436 go to adm performance..... They're aftermarket options.
@bradelinagomez11614 жыл бұрын
Awesome video! Thanks so much. Explained a lot of what I had "heard" but never "seen". You are a badass!
@sock9793 жыл бұрын
Thanks for sharing I'm planning my own LS swap once I graduate in May and I was thinking about using an OEM blower although I'll be using an LS not an LT I don't want to mess with direct injection but thanks so much for putting this info out there it's all those little things I remember all those little problems when I built my own m90 supercoupe supercharger setup on my mustang
@on3builds660Ай бұрын
Thank you’ I’m getting Dino this weekend and I had enough time to order a grip tech pulley adapter for wet sump Since my c7 stingray with a built wet sump block and heads , I got a secrete x king blower with a dry sump Z06 blower and ordered the same 2.30 for wet sump !
@sethhughes21632 жыл бұрын
Hope that you made it back then! I would be pulling out my hair... wow. Appreciate it!
@sc1scotty Жыл бұрын
I have the same LT4 builder as your Z06 motor. Good video...
@lt1z3505 жыл бұрын
It’s only in the snout. You can use the blower you can even use the z06 snout but with the right pulley on it. The back half of them is identical. I just put a 2015 zo6 one on my 17 zl1 and I’m just switching to The zl1 nose to it. But they also make the pulley to make it work. The only real difference is in the bricks and lid and that also swaps between them. So really any blower can work for any application with the right pieces to match it up.
@zubzero41 Жыл бұрын
Where did you get the pulley adapter?
@DigitalCarAddict3 жыл бұрын
So I have a 2016 Z06. Is there any benefit to running the newer/thicker supercharger lid on it?
@daily5.0r-spec973 жыл бұрын
I would guess yes bc that would open up more room for air to flow.
@christopherswanigan85465 жыл бұрын
Glad to see you getting that supercharger project rolling.
@NerdKid724 жыл бұрын
The dry sump crank isn't shorter its .900" longer to fit the dual stage oil pump, the serpentine system on the corvette (dry sumps) is only 2 stages/belts vs 3 on the camaro/ctsv (wet sumps) is why the supercharger spacing is different and as others have mentioned there are pulleys to space out the dry sump blowers to wet sump spacing
@thegenrl Жыл бұрын
hi can you convert an L83 to use a short snout supercharger (from corvette)?
@lifewithmike18833 жыл бұрын
My 2017 ZO6 has the newer style blower with the larger bricks and lid
@jimmywoods1906 Жыл бұрын
Same here
@keything84873 жыл бұрын
thanks for the info....love the old SS wheels !!!....shes gonna be beautiful !!!
@dandorris85315 жыл бұрын
Nice can’t wait to see it run. Great info on the difference I wouldn’t have known.
@adrianhernandez38023 жыл бұрын
Awesome video! Thanks for learning us something!
@Blakehenry119 ай бұрын
Great work man. Good info
@scherzer258 ай бұрын
Awesome video thanks for the info I have been considering doing my 2012 5.3, but not exactly sure what to be buying. any help would be much appreciated. Thank you in advance.
@Dunedain3135 жыл бұрын
Hey Mitch, looks great! I’m curious about this as a possible upgrade for my JK/L83 swap. Do you see any potential issues for fitment?
@swaptimeusa5 жыл бұрын
Yes, a different accessory drive would be needed and the throttle body to radiator clearance might be to tight
@EduardoGarcia-st1kc4 жыл бұрын
I have a 2017 chevy camaro 2SS which one of these two would fit the LT1 engine in my car?
@daily5.0r-spec973 жыл бұрын
Did u not watch the vid bud?
@andrewhibbert99583 жыл бұрын
it would be cheaper to just buy a zl1. save the time and money
@nickparker67132 жыл бұрын
Appreciate this greatly!!!!
@apacheone36434 жыл бұрын
It looks like you are using a Camaro electric cooling fan did you put in a spal controller or wire it to the ECU?
@richardrohr51062 жыл бұрын
Are the lt4 port and direct injection? Like the lt5? And can i buy the corvette supercharger you have?
@jprelude925 жыл бұрын
You are so wrong on these 2 superchargers, the supercharger on the left does not belong on a 6th gen Camaro it belongs on a 2016 v3 cts-v, the 6th gen Zl1 Camaro came with the upgraded cooling bricks and lid just like the one on the right , also the 2015/2016 c7 z06 have the old style supercharger that looks just like the one on the left with the flat bricks and flat lid on 2017 the upgraded the bricks and lid on the v3 ctsv and c7 z06 and the 6th gen Zl1 already came with it upgraded from factory.
@swaptimeusa5 жыл бұрын
Thanks for the input. As stated in the video I was not 100% sure on the bricks. The supercharger on the left was off a crate LT4 engine. It has the spacing of the camaro. The CTS-V and Camaro share the same offset. Looks like the difference according to you is the CTS-V has the slanted bricks. I have read that the bricks only make a small difference in cooling the IAT's. If anyone has anymore info on this please post it up.
@timothyberlinski2299 Жыл бұрын
I have a 2018 ctsv and a supercharger off a 2018 zl1 in my garage. would I be better to swap them since the zl1 has the better bricks?
@veggiej3520 күн бұрын
@@timothyberlinski2299 take off your lid and see if your bricks are upgraded You might run into clearance issues
@Itssike14 жыл бұрын
I wonder will they do identical, engine configurations for the Camaro, and the Corvette. Seeing now the Corvette is mid engine, and there is no way they will have identical performance. Making the Camaro the supreme pony car, further distancing it with already better performance, than Mustang.
@Macburton96 Жыл бұрын
Is there any performance difference between one lid over the other?
@patrickuronu4235 жыл бұрын
Hey man. Nice project. Would you mind share about plugging the pcv. Do you have any issue on built up pressure on crank case? Did you plug the hole at the bottom of supercharger
@JstAbase_c64 жыл бұрын
Quick question, I have a 2008 LS3 6.2 base and there's a great deals online for lt4 superchargers out of the 2015-17 vets, will these superchargers work on 08 model base c6 vette LS3 ? Thanks
@djrr.zl1 Жыл бұрын
my friend camaro ZL1s never came with the small lid ever so that supercharger did not come off a camaro, only the z06 vette before 2017 came with the small cooling bricks and flat lid, gm put the bigger ones in 2017 models of camaro and vette and zl1 was made in 2017 so it only came with the big cooling bricks and tall lid..
@simsbertclercent97612 жыл бұрын
Can the bigger coolers of the newer sc fit in the old style? If so I'm thinking swapping the bigger lid and coolers will make a big difference.
@rudyraymundo11212 жыл бұрын
Is the engine on the truck a 5.3 ?
@BODINE0145 жыл бұрын
Where you pulling vac for supercharger from since you plugged the hole
@T3SLIFE2 жыл бұрын
Do you happen to know if the supercharger to head bolts are the same length on both blowers?
@drummer146914 жыл бұрын
this on a LS3... 👍🏻? or 👎🏻? fit or no fit. good or bad idea
@feliperosas6420 Жыл бұрын
Will a 2018 corvette lt4 supercharge be compatible with 2017 l86
@AndrewMays-je5xx Жыл бұрын
Wait a minute.. my 2018 camaro ZL1 has a 2" lid... do the z1l or the z06 come with larger lids?
@mannmadesbc Жыл бұрын
GOOD content.
@jprelude925 жыл бұрын
Like I mention before 2015/2016 c7z06 and v3 CT’s-v came with the flat bricks and Lid , 2017 6th gen Zl1 which it was the first 6th gen Zl1 already came with the upgraded supercharger Bricks and Lid also 2017 c7z and CT’s-v were upgraded in 2017 , I personally own a 2017 Zl1 and it came with the upgraded bricks and lid from factory they never came with the Flat bricks or Lid. I’m a mechanic and have worked on a few 2015/2016 c7z06s and they have the flat bricks and lid hence why I said you were wrong , I would post pictures but I can’t since it’s not my post and it’s you tube.
@davefossler15505 жыл бұрын
Incorrect about the CTS-V3’s getting the canted bricks and lids. That mod was only done to the 2017 ZL1’s and Z06’s. The 2017-2019 V3’s still run the non canted bricks and lower lid.
@jprelude925 жыл бұрын
Dave Fossler yes I was wrong about the gen 3 CTS-V they do not come with the same bricks or lids as the 6th gen Zl1, they still have the old style flat bricks and lids like the 2014/2016 c7z06.
@gottmituns32252 жыл бұрын
Hello lads !!! This S4 it is a monster of AWESOMENESS boys, the Star Trek Enterprise shuttle have nothing on AUDI... the power, the beauty and the safety look like they are just arrived from another dimension... a very advanced one, i'm such a humongus fan folkes . I wonder if i can adapt a supercharger on my sedan AUDI 2006 A6 4f2 C6 Quattro 2.4 MPI natural aspirated, 24 valves V6 DOHC, does anyone heard, seen or done anything like that... or almost the same on AUDI ??? PLEASE, if some one can give me a tip, ideea, advice i'm asking for help... THANKS and be well always folkes !
@tonyvang52924 жыл бұрын
Which one will u prefer if I wanted to put it in a 2017 silverado 5.3 thank you
@rafaelw31713 жыл бұрын
Base corvette has a wet slump only the z51 and grand sport have the dry slump ..
@Torch4Life2 жыл бұрын
yep, LT1 comes both ways. People don't seem to understand that.
@TheFaithtrix3 жыл бұрын
I have a 2016 Z06 lid on eBay. Where else should I list it for sale? Any suggestions are appreciated.
@lee.guynes2 жыл бұрын
Can you tell me if a LT5 supercharger will fit on a L86 engine? Thanks
@bayareaoutlaw4 жыл бұрын
I would like to ask you a question. If I have a Corvette 2017 lt1 engine and wanted to put on a gen6 Camaro lt4 supercharger off a lt1 would It fit. I am not installing it in a Corvette maybe a c10 so good clearance would not be problem. Just needed your help
@jamesmichelucci775611 ай бұрын
Why is the LT4 supercharger not adaptable to the LS engine?
@Walkman3315 жыл бұрын
Hey, just to be clear. Did you put that Camero Supercharger on an LT1 engine with an adapter plate? I have a 96 LT1 in my Roadmaster and would like some more power.
@swaptimeusa5 жыл бұрын
These superchargers are off the new Gm Gen V engines. These will not work on the 1990's LT1.
@larrylung47953 жыл бұрын
I am looking for one to put on my 2015 stingray a LT4
@2023C8HTC4 жыл бұрын
Great info.Thanks!
@nagazinafireworks75944 жыл бұрын
So Im thinking of buying a 2016 vette Z06 would it help if I buy a 2019 lid and put it on the 2016 super charger or just leave it alone? thanks
@blakman415 ай бұрын
Are Zl1 and CtsV snouts the same length
@dieselmechanic84 жыл бұрын
Appreciate the info cause I’m about to do my first supercharger swap and I was looking at a z06 charger, so get a camaro supercharger if I was doing a 6.2/8l90e LT regular motor?
@joseramirez55824 жыл бұрын
Thats my set up yes you can
@coreyblacksher5 жыл бұрын
Where did you find one for $500 please put me in the right direction
@dawg72304 жыл бұрын
corey blacksher I found mine for 1600, 500 is pretty damn cheap and 1600 is a damn good deal
@ltxobs90584 жыл бұрын
I have lt4 supercharger for sale
@nicholasoliver98034 жыл бұрын
Jesse Elias do you still have it I’m looking to buy it ASAP
@coreyblacksher4 жыл бұрын
@@dawg7230 still have it
@ltxobs90584 жыл бұрын
Nicholas Oliver yes email me @ Elias.jesse909@gmail.com
@robertm21724 жыл бұрын
1.74 liters of heat pump that tiny thing has to spin on overtime to make hot boost
@DsingleSergio2 жыл бұрын
Do you have a c7 corvette supercharger for sale?
@478slimm2 жыл бұрын
What type of harnesses mods do you do🤨 I’m about to ls swap my 5.0 Genesis G80. Nobody has done it before and I’m in for a ride 😮💨
@STEZjorge Жыл бұрын
Well depends on what you trying to do. Like for example if you want to retain all the factory gauges and factory features like your key fob. Then you will need to rewire quite a bit. But just to get the engine running and driving all you need is a terminator x max from holley super easy and noob friendly just need to know your reluter wheel if it's 24x(gen 3 older ls 4.8 5.3 5.7 6.0)or 58x(gen4 newer ls 4.8 5.3 6.0 7.0)
@boblund84445 жыл бұрын
You are incorrect about all Camaros having wet sumps. The ZL1 Camaro uses the same supercharger as the Corvette and has a dry sump system.
@swaptimeusa5 жыл бұрын
Bob Lund It’s the same supercharger? The snouts are different from shown in my video.
@boblund84445 жыл бұрын
@@swaptimeusa Yes, but only on the ZL1. the ZL1 Camaro uses the same engine as the vette. They are both dry sump 650 HP engines.
@davefossler15505 жыл бұрын
Bob Lund incorrect. I don’t know who told you that info, but there’s only one dry sump LT4 engine, and that’s in the Vette only. The LT4 ZL1 shares the same wet sump system and supercharger as the V3. There’s no oil tank in the ZL1 engine bay for the a dry sump system.
@boblund84443 жыл бұрын
@@davefossler1550 I own a 2018 ZL1 and it definitely is a dry sump gen 6 LT4. The crate version is a wet sump but if you check GM's specs the gen 6 is a dry sump.
@williamanthony451210 ай бұрын
So I have a lt4 that I bought from a salvage yard.. 2018 zo6 had 10,000 .... Connie confused on what exactly i'm on a needed do to To put on my 2003 avalanche 5.3
@therrinchisley7600 Жыл бұрын
Would it work on my 96 impala
@KAB54403 жыл бұрын
So would it be possible to put this onto a 2006 5.3 vortec ls?
@johnman5178 Жыл бұрын
What if I have a lt1 c7 non dry sump 2 LT
@TheBernieCarrillo5 жыл бұрын
So I can add the LT4 supercharger on the Lt1 with the spacers to match the fitting ?
@YvonDex4 жыл бұрын
Bernie Carrillo yes
@TheMarkOfN4 жыл бұрын
Yvon Dex Would adding a LT4 supercharger to a LT1, put it in the similar power output range as a stock LT4 makes?
@YvonDex4 жыл бұрын
Nicolas yes. But you have to change the stock cam. You have to use a cam that works with boost
@Adrianlandl863 жыл бұрын
Lt4s were not available on 14 & 15s
@bad4health5 жыл бұрын
Going from racing with my LSA supercharger to my LT4 supercharger and having a serpentine setup on the lsa and breakin belts then going to a dedicated drive I don’t recommend a serp setup with any supercharger. They break belts and will leave you ass out. They never break in front of the parts store either 😂😂😂😂 but anyways when u get the tune let me know hell I’ll split it with ya tuning shops here are a joke. I sent my stock tune out a month ago and haven’t heard anything yet.
@swaptimeusa5 жыл бұрын
bad4health Having the charger run on its belt is definitely the best way to go. I am saving up for a drive junky setup but this will get the tires spinning in the mean time
@swaptimeusa5 жыл бұрын
I have my tune dialed in now:) email me at vannatta20@gmail.com for a tune. I need to save up for a proper belt drive setup!
@streetglide84hog34 Жыл бұрын
@@swaptimeusa how much you charge for this I need it asap on my 5.3
@swaptimeusa Жыл бұрын
@@streetglide84hog34 I don't sell the superchargers. I do have a set of lt4 injectors for sell
@streetglide84hog34 Жыл бұрын
@@swaptimeusa can you do mines for me I can bring it I’m a truck driver LS 5.3 I want this bad
@Jm8126-54 жыл бұрын
You can swap the noses off each.
@KazDolla13 жыл бұрын
where did you get it for 500?
@23drey4 жыл бұрын
Can I hire you to do a lt4 swap in my 79 c10.
@knjpollard2 жыл бұрын
Would the larger inter cooler bricks and larger lid work on the other SC you have there?
@glennjames915223 күн бұрын
Yes.. you can adapt the slanted bricks to fit in a 15-16 supercharger.
@travacusmoore2247 Жыл бұрын
Do you have one for sale
@superiorautobody4 жыл бұрын
what about plcing it on a gen v lt1 ?
@gmayne56634 жыл бұрын
Which super charger can I use on a L86
@joseramirez55824 жыл бұрын
You can get a cheap whipple bro
@rafatrill5 жыл бұрын
could u switch to a different crank balancer to make it line up?
@421ssrida3 жыл бұрын
ICT billet has adapters and a pulley kit to fit a LT4 blower onto a L83 or L86 truck engine
@421ssrida3 жыл бұрын
Also admperformance.com
@WannabXiii5 жыл бұрын
Do you know if the snouts are interchangeable?
@swaptimeusa5 жыл бұрын
WannabXiii I would bet they are but I don’t know how you would buy a snout from gm
@subz3ro435 жыл бұрын
L83 5.3
@schlingel95795 жыл бұрын
Do you sell the corvette charger?
@ltxobs90584 жыл бұрын
schlingel i have one for sale
@alonsoespinoza78284 жыл бұрын
@@ltxobs9058 you still have it for sale. I have a 11 camaro ss. Do you think it will fit? 1palmita1@gmail.com
@przemek319825 жыл бұрын
Will the 2017 zl1 lt4 supercharger work on 6.2 L86?
@subz3ro435 жыл бұрын
Duhh
@davidraduziner87323 ай бұрын
SLEEPER!!!
@Luis92r4 жыл бұрын
What transmission goes hand and hand with this shit and how hard would it be throwing this bitch and an old envoy I have a project I wanna do looking for a racing engine that would fit
@emadalruwishan83054 жыл бұрын
U totally confused camaro g6 zl1 has same engine of corvette zo6
@swaptimeusa4 жыл бұрын
So the camaro has a dry sump oil system???? I don't believe so. Camaros are wetsump.
@MARTPERE4 жыл бұрын
Yes same engine 650 hp
@jprelude925 жыл бұрын
media.chevrolet.com/media/us/en/chevrolet/news.detail.html/content/Pages/news/us/en/2014/Aug/0820-8speed/0820-compact-powerhouse.html Here you go this article was 2015 when the c7 z06 came out . I’ll try to find one for the 6th gen Zl1 since it seems you don’t be alive what I’m telling you .
@40rtyrolls313 жыл бұрын
Will lt4 for on a ss
@jprelude925 жыл бұрын
www.roadkill.com/2017-camaro-zl1-tested-on-the-road-track-and-strip/ Here you go .