Finishing my 600cc crosskart and making it street legal!?

In today's video I'm finishing my 100hp+ gsxr600 powered cross cart buggy. And talking about street legal it after. This is probably the lightest and most aggressive one yet.
CHECK OUT MAXSPEEDINGRODS: www.maxpeeding...
Use code: Vasily
Swag offroad press brake: www.swagoffroa...
Swag offroad tubing notcher: www.swagoffroa...
🔥🔥NEW MERCH!!
shopvasilybuil...
MY WELDERS:
usaweld.com/?r...
*USE CODE: VASILY5% for 5% off your next order*
Follow on Instagram: / vasilybuilds
For all inquires email me vasily1fab[at]gmail.com
Want to contribute financially?
/ vasilycustombuilds
🎵 Music used from www.epidemicso...
Outro: / unreal

[@VasilyBuilds]

Let me know what you think about longer vids

[@mithulsharon1844]

Longer build videos are better... 🔥🔥👍🥲

[@mithulsharon1844]

Wrong emoji

[@jimjohnson1304]

Much more gooder

[@StrongBarnes90]

I love that Rich Rebuilds does weekly 30 min episodes so def more time would be cool. This thing looks awesome!

[@levisylvester]

I would even watch a 30 min vid!

[@jhawk1985]

Man your one hell of a good fabricator to be so young. Your gonna be on beast mode when you get older. Love watching your builds and watching you solve issues👍

[@edhellbilly]

Yes he is...and has a good head on his shoulders

[@jeremybaskett1074]

You can tell how good hes gonna be by Maxpeeding rods giving him that turbo

[@edhellbilly]

@@jeremybaskett1074 i wish the best for him i believe he will go far and do great things with his life hope he rubs off on others around him

[@johnnydiaz3375]

Yeap your pretty good at everything you do man lord bless you Dawgs and I be using your ideas 💡... an I'm pretty sure you know Red beard but thts for racing stuff but it my guy for inventing things

[@PureCountryof91]

Nah man. A custom shop with a good reputation need only see his channel and should be hiring. The best resumé is one you can see in action.

[@dankrafted]

i admire so much that you are willing to go back and undo previous work to improve it and make it better. the care and attention to give each build is really commendable, loving the way you're taking this. superb build.

[@dylanyates6331]

Just a few notes from years of researching crosskarts: 1. This is awesome 2. You're gonna have to run at least a gallon in the tank to prevent fuel slosh. If the unit is upright you can use the fuel level sensor thats on it too 3. Please put a lot of detail into the street legal part of this build. There are many crosskarts out there but few if any street legal ones. Very interested to see how you do it. 4. Having a short chain like that could lead to excess heat, especially with the extra weight. Consider using a 1000cc xring chain (if you haven't already) and potentially a chain oiler. Chain oiler also helps with dirt from trails, as would a full chain guard

[@VasilyBuilds]

Thanks! Yes ideally I should have put a baffle in the tank. I will have to run it mostly above halfway. And I will be using an x ring chain, I've experienced overheating issues on chains 4x smaller than this so I don't think it will have problems with that

[@dylanyates6331]

@@VasilyBuilds also oil slosh but that might be okay

[@TM-jt3dd]

5 gallons is alot of fuel. You probably been good with a 2.5 gal

[@sk818factory5]

you ever tried to run from the cops with only 2 gallons?

[@houseoffire72]

I have litterly watched 100's of cross kart build vids. And to be absolutely honest I have to say I'm really diggen the design and size of the frame. Its somewhat reminiscent of the old Honda 350 & 400... Excellent work..!

[@fatdaddygaming9102]

How does this kid not have more subs/views/likes? His work and dedication is unreal

[@aarongrabowski3775]

Because not enough people hit the thumbs up.

[@TM-jt3dd]

His sub to view count is decent ..some people have more subz and get less veiws.. but his work is great .I been subbed to him since he was at like 2k subz and I knew he whould blow up he is very talented for his age especially what he was doin when he first started welding

[@bczarrockbeast6264]

I like that his stuff is done in a garage like mine with minimal tools. It feels genuine.

[@justgetrinthere]

I agree its really good content

[@mikemay1922]

Suggestion mention him in comments on other similar channels it helps!

[@ethanswaggerty5938]

I genuinely cant even fathom your skill man. The gas tank alone had me in awe. But the dedication and hard work you put into each and every project is amazing! You are one of the best channels ive seen on here man! keep up the good work!

[@VasilyBuilds]

Thanks! I'm still learning

[@7795Dakota]

Dude this is awesome! Id maybe consider getting with a company to sell DIY kits for people to do at home with their kids that don't know as much as you or have half the tools. I'm a welder fabricator myself and my biggest limit is tools and space... 😔😔

[@damnthiccassboye7138]

im so happy i finaly finished building my motorized bike and testing it

[@dylanpassmore8186]

What state are you in to where you can make this street legal?

[@VasilyBuilds]

You can make "kit cars" legal in most states, as long as you have a VIN either from a frame or motorcycle. It is a lengthy process however

[@dylanpassmore8186]

@@VasilyBuilds awesome dude! Thanks

[@Indoor_Man]

Nice work man. I can't wait to see what your future brings. People that develop themselves with such focus and drive as you have, at your age, have always inspired me. Keep it up Vasily! Good things come to those who really want them.

[@readyforanything6164]

Bro you should def make your break hydro pneumatic like your pipe bender that would be super convenient

[@fidellugo3383]

when your weld is progressing to the left, start on the left side and "back step".. that way your "tie-in's" come out more uniform. if ur not familiar with "back stepping" look up the welding term.

[@saullife87]

You are are a very talented youg man keep up the great worck and Hello from France 🇫🇷🇺🇸💪👍✌️

[@timmehnz]

wouldnt the fuel get hot ? ull need to add some extra plate on back of fuel tank as a heat shield

[@MarkMachine_]

omg, this thing is sick. I've been waiting for this forever!

[@eugenesbackyardrepair4593]

Hey bud just a thought. You might need to reach 9ut to a company for a bead roller. It would of made that skid plate a lot stronger and not so much tin can sounding over bumps. Lovd the build though

[@DenRoedeMogM]

First of all, you're awesome...So keep up the work :-) Second... It's a Gixxer, not Jigster.. :-)

[@bryduhbikeguy]

270K Subs,but that video had almost 900K Views.Come on people,show Vasily the Support ! Longer videos will be well received too.

[@maxtaylor1026]

Sick! Kid, I hope you keep going down this path and end up some kind of world renowned engineer. 👍

[@gmane1989]

I don't know why but he reminds me a lot of boostedboi Kyle. would be cool to see those two one day build some crazy machine together. They're both tedious about what they do and very smart. I just think it would make some good content

[@hrsey71]

looking good! you gotta rip it around with #ratherBwelding when you get finished

[@larrydavidson3402]

That is some beautiful welding my friend

[@VasilyBuilds]

Thank you! Still lots to improve on

[@Kylesbikeprojects]

awesome work bro. I'm building a go kart from scratch now

[@joeyperry7216]

Man you come along way since your Chinese go kart engine swap vids, keep it up 💪💯💯

[@Mikefngarage]

TIG WELDING ALUMINUM.....WOW you really amaze me.....

[@mkultra4542]

Will you add a skid-plate/scoop at the top of the cage , just above and to the back of your head, that bends with the frame towards the back of the engine too divert some airflow towards the engine ? . . .or how will the engine stay cool behind you ? Awesome channel man !

[@superchickensexcavation2230]

Great build! You have come a long way! Been watching since the beginning. Just curious regarding the suspension- how do you figure the angles? If it was said in the video series I apologize, I unfortunately don’t have time to watch all videos completely. Is it trial and error or do you go off existing cross carts for your design? Or is there some kind of suspension math formula to figure it out?

[@TyranisCustoms]

I can't wait to see this thing in action!

[@bryceberryracingberry8405]

I really enjoy seeing the progress on your home made machines and how far you have progressed as a fabricator, sorry your having a rough year breaking bones but your projects are sick! Keep up the great work

[@chicagovasko]

Awesome build.

[@rastamanralph6670]

I'm all up for longer videos with cheesy crimbo jingles in the background😂❤💛💚👍

[@sykwookiee]

Wazzup brother? Try TSO to maybe change your mind about the cheezieness of Christmas tunage...happy listening!

[@rastamanralph6670]

@@sykwookiee tso?

[@sykwookiee]

@@rastamanralph6670 Trans Siberian Orchestra...they pump up every Christmas tune with some heavier renditions...I won't play any other music around the holidays...I burned-out on Christmas songs in like 1979...😆...the real deal is to see them live...I try not to miss them when they tour...

[@rastamanralph6670]

@@sykwookiee Cheers😁 I like that music. It reminds me of elo which I have a few lp's of and love.

[@povtarev4408]

Осторожно брат Вася перед каждым делом молись Богу об охране и благополучии и после благодари Его

[@3ch0_17]

When he said that turbo might not work with the gsxr engine I had a moment. That turbo would double the hp of that engine with proper tuning.

[@juansprojects3056]

Awesome build. Also liked the Christmas music

[@plumberhero]

Excellent fabricating! Ready to see it finished up and ripping down the street. Liking the longer video time too.

[@esxguru]

Good job kid! If you’re going to drive on the street make it extra safe and visible. Maybe some prospecting sponsor can throw some led whips and lighting your way!

[@CS12172]

I just subbed-this guy is awesome!

[@Stevo_Be_Fluffy]

I dig this street cart deal, also suggestion. Could u put the 600 triple in a quad, maybe a drag quad. I think that would be rad, keep the cool projects comin

[@willholmes1757]

Keep the long vids coming, awesome content

[@carsonkosier4010]

Would help you out if u put some baffling in your fuel tank

[@FunniestFlicks]

This would look sooooooo good with a powder coat

[@DezLaTez]

Do you have plans for this? Mainly the chassis design

[@MikeOrkid]

Looking awesome, dude. You should be running that Tig more. I'm assuming it's ac/dc. Practice practice practice.

[@stevenmarchand8146]

Turbo the cougar that would be a cool project, and you got a nice turbo for it now.

[@VasilyBuilds]

i sold the cougar, I have a miata now

[@stevenmarchand8146]

@@VasilyBuilds dang I missed that. Well miata would be a sweet project also!

[@bryduhbikeguy]

I went through all the comments so I wasn't stepping out.I know a fuel gauge isn't needed,so it's position doesn't matter,but the pick-up's in the middle of the tank now.Just rubber lines to a sock at the bottom fixes?(I've only had to deal with 1 electric pump in a tank before).

[@teamgrizzly.880]

Dang right overhead is hard I had to do it in school

[@dirtbikesfordinner3706]

Ready for top speed test already! 😂👍

[@jefffreeman644]

I like all your videos. Longer the better. Your a seriously good fabricator and you should consider starting shop to build and sell unique creations. Because would I buy a riding lawn mower with a 600cc motorcycle engine on it? If I could, hell yeah I would!!!

[@RC_Obsession]

Is there anyway I could get you to build one of these? You’re the best fabricator I know. I already have a Ninja 1000 motor!

[@TheShepard5348]

What company are you using to get your ride street legal? Longer videos would be cool.

[@VasilyBuilds]

Dirt legal, it's mostly for rzr's

[@MOE13576]

Awesome sauce

[@mattprice37664]

Man you can’t leave us hanging Now I’m going to have blue tube

[@colingotch1871]

I’ve said it from the start. You’re a gun for a young bloke. You’re in my top 5 build Chanel’s on KZbin. Keep it up mate.

[@mikemay1922]

Future 10 years ahead NHRA chassis fabricator! Great skills young man!👍

[@donniesnyder7752]

I'm surprised you haven't had no job offers fabricating like you do you're very good at it you can probably go into your own business and fabricate them vehicles custom fabrication I think he'd be really well at it and God bless you and your family in the name of Jesus Christ amen

[@jayhacker1641]

What pipe did you use for the frame?

[@tysonsullivan7837]

This was my first time seeing your video, I’ve built my own drag car in 4 years lol, But Great 👍 job can’t wait to see more videos..!!

[@VasilyBuilds]

Welcome aboard!

[@danielbadel1226]

Hi! Excellent video. Which shocks and springs models do you use for the rear and front suspension?

[@ericksontibayan5084]

Big fan of your channel.. i love all your projects specially this crosskart and the 2stroke gokart..

[@600wheel]

I’m going to keep asking this question and every video of yours until I get an answer when you changed out the snowmobile engine on your lawn mower build the rotation of the engine was one of your big problems why didn’t you just reverse the rotation it’s a two-stroke the only thing you have to do is adjust the ignition timing and if it’s an electric start reverse the rotation of the starter those are the only two things stopping you from running a two-stroke motor in any direction you want ignition timing and reversing the starting method… I just remembered the CVT was causing you problems also but I’m still curious if you considered the possibilities of reversing the rotation of the motor

[@akihirozheng9273]

Oh i thought i was watching goonzquad...😁😁😁✌️✌️✌️

[@griptopia]

Gexder... GSXR.. love it..

[@myneckjusbroke3301]

I’ve got maxpeedingrods coils on my car and they are definitely a lot better than the other coils in that price range

[@lloydbaker7099]

Enjoy the content young man don't stop building

[@domenicozagari2443]

Instead of the sway bar you can put a steel cable to hold the wheel up and stop it from pushing the buggy up.

[@bghouse2853]

Pumped for this video

[@joshuascoggins6949]

U get a turbo in the mail and don't "just try it" on anything you got?? Lol nice builds 👍

[@Demasys]

You should sell plans for this build. I bet you could make some money from that. I definitely would buy a set.

[@samialjahwari4549]

You are the creator of the most beautiful cross-card project

[@VasilyBuilds]

Thank you! I try

[@craiggiles4657]

That’s a lot of liquid sloshing about without a baffle plate inside.

[@aaroncharlwood9899]

You can use dowty washers to seal Bolts too they have O rings in them

[@richardlord4132]

THE MOTZART OF FABRACTING VERY IMPRESSIVE.

[@randyhertzberg7549]

I bought one of those gas cap fillers ... check to see if it is vented.

[@timothycollette8263]

Damn good welding, man. Damn good!

[@michaelblacktree]

Nice progress! This thing is gonna be sweet! 👍

[@tomlenza2768]

So so sick. I’ve been watching from the beginning you came a long way brother. Mad props to you.

[@232Stangpwr]

Great work man! This is my favorite project of yours so far. Keep up the hard work and we'll keep sending Subs and likes!

[@fvpaquetqc]

Mean looking machine! Good fab skills man everything looks solid

[@streetrossi937]

The gas tank is a perfect fit it looks like it was me to fit for that

[@edwardsfamily6184]

Hiya buddy ru goonsquards brother I was just wondering????

[@VasilyBuilds]

No, just a friend

[@jonbaggarly6969]

Hell yea brother lookin alot better now that's in the home stretch I'm buildin one with grizzly 600 rear axle and virago 1100 vtwin shaft drive motor

[@DUDEfreestyle]

work on the builds, no rush. really do the build like you want it.

[@mudjamz75]

Does your saw blade contaminate the aluminum for welding ? I've had that problem in the past.

[@VasilyBuilds]

yes a little, I don't noticed it when welding however

[@Johnsmith-mz3uq]

Love your builds man but I got to say that radiator's in a bad spot if it was to rupture or bust.

[@StephenBrewer89]

Dude I remember when you first started these projects. I was always impressed by the drive, even if you didn’t have the most practice you still just made it happen. You have come a long way. Best of luck to you dude! Keep rockin and rollin’! 🤙🏻

[@jmyd83]

looks like a rage buggy 😍

[@samuelgirouard8756]

That’s Just insane

[@matthew7992]

Cart looks solid! Nice welds! 👌

[@orboffire]

to step up the welding aluminum consider use rubbing alcohol to clean ur alu parts before welding and use a high grid sandpaper to remove some off the shine on the edges where u going to weld then clean it with rubbing alcohol, this going to change alot of the look of the welds and easyer :)

[@hammerT2997]

Awesome job Vasily!!! She's a beaut man, hell yeah for the longer vids man, your talent level is very ahead of your age, by a long ways man. Keep at it bro

[@dimitrisneofotistos1374]

You doing great job with all your projects!! It's actually amazing for your age to have that many skills! I have a question if you can help.. im looking to build my first kind of crosskart but I'm from Europe so I really don't understand the dimensions on the materials.. what would be the most economical option for round tubing but with sacrifice safety ?? Basically what I'm asking is what is a good tube size and thickness for build something like that without blowing my bank account..🤣🤣thanks in advance keep up the good work!

[@VasilyBuilds]

32mm or 35mm size tubing .120 or .095 thick

[@dimitrisneofotistos1374]

@@VasilyBuilds thanks dude!! By the way Vasily is Greek name right?

[@LuisRodriguez-js6hm]

Hey man great build what sprocket tooth count you go with (front and rear)

[@VasilyBuilds]

13/49 with 22" tall

[@Bucky916]

I have to say your Welding has gotten soooooooo damn good from a few years ago. Looking good my man. Oh and the XKart looks epic! Have Fun brother !

[@philaustin7303]

I am very impressed to see a young man use his hands and his mind to actually build something he can use and he can be proud of!

[@NastyMoto]

This is so sick!! I’m building a backflip jet on my channel!! If you could give me any suggestions on my videos, I would greatly appreciate!!

[@jacobestrada8224]

Killing it 🔥💯

[@ranger6779]

Worth the wait. Cait wait to see it run

[@EJ-74]

Awesome build bro Can't wait to see this thing rip 🔥👍✌️