VATSIM Tutorial: Departure Communications - from Startup to Cruise!

[@AviationPro]

✈️🌎 NEW & UP TO DATE VATSIM 2017 TUTORIAL SERIES! Check it out!!! 🌎✈️ kzbin.info/aero/PLtO_n5SzuAadbW1hjV59Ebm6s9APfWsZM

[@faustsmith]

I am asking about streaming in respect of the Pilot Edge air traffic control utility? Is streaming involved with regard to Pilot Edge use? Does Pilot Edge have a fully functional ACARS? Would you see visually other traffic on your computer monitor/ screen and on your airplane's TACAS vsi instrument when on or using Pilot Edge? I ask if streaming is involved as there must be some kind of screen capture software working on all participants computers to record each airplane's position on the built-in database map of the flight simulator program that it may be displayed to other aircraft traffic within the Pilot Edge air traffic control system. How is other traffic determined and hence displayed to participant traffic on Pilot Edge if streaming is not involved?

[@faustsmith]

I am asking about streaming in respect of the Pilot Edge or VATSIM air traffic control utility? Is streaming involved with regard to Pilot Edge use? Does Pilot Edge have a fully functional ACARS? Would you see visually other traffic on your computer monitor/ screen and on your airplane's TACAS vsi instrument when on or using Pilot Edge? I ask if streaming is involved as there must be some kind of screen capture software working on all participants computers to record each airplane's position on the built-in database map of the flight simulator program that it may be displayed to other aircraft traffic within the Pilot Edge air traffic control system. How is other traffic determined and hence displayed to participant traffic on Pilot Edge if streaming is not involved?

[@milesrudy870]

I dont mean to be offtopic but does any of you know of a trick to get back into an instagram account?? I was dumb forgot the login password. I would love any tricks you can offer me!

[@zechariahdonald6694]

@Miles Rudy Instablaster ;)

[@milesrudy870]

@Zechariah Donald thanks for your reply. I found the site through google and Im in the hacking process atm. Seems to take quite some time so I will get back to you later with my results.

[@huntercase244]

The first difference I noticed was in the clearance. in America we say "Kennedy Clearance, AAL2023 is ready for clearance" then the controller will reply "AAL2023, Kennedy Clearance cleared to the Boston airport as filed climb and maintain 10,000 expect FL320 10 mins after departure push and start at your discretion. Expect runway 13R, squawk 1320 contract ground 121.9 cya" the piolt will reply "AAL2023 cleared to Boston as filed Climb and maintain 10,000 expect Fl320 10 mins after departure ground on 121.9 have a good day"

[@ifly7777]

The only difference is that the ATC is sometimes quiet or too fast

[@shinkicker404]

or have kids screaming in the background... that was a fun first experience.

[@AClRCLEOFLlGHT]

It sounds like a lot of ATC is auctioning off clearances.

[@robweaver9763]

Using these guides to help build my confidence for vatsim. Thank so much!

[@AviationPro]

I'm glad to hear that, you're welcome! :)

[@NextGen_Pants]

Hey thanks for posting this, it was pretty helpful. I had my first VFR flight on VATSIM last night, made a couple of mistakes, mostly on ground procedure, oops, and thought the controller said left downwind when he said crosswind, but the controller was patient and it wasn't a busy airport, but overall it was pretty enjoyable. The hardest part was pressing the push-to-talk button for the first time heh.

[@AviationPro]

+NextGenPants You're welcome! :) Well, it's a good thing that you started at an airport that wasn't busy and luckily there was a polite air traffic controller online! :) And yes, that's the moment we all "fear", but once you've made the step it will be very easy! :)

[@kayta6141]

tysm for the tutorial. Now I have a lot more of confidence and knowledge for my first vatsim flight.

[@AviationPro]

You're welcome!

[@VihanRansika]

The most informative tutorial ever! Thank you.

[@AviationPro]

Thanks for watching!

[@MaxRank]

Great for starting out using vat sim and phraseology, 1 quick point don’t use for or to when communicating with atc. This can easily be confused instead report altitude changes as climbing and descending then your assigned altitude. Great video.

[@AviationPro]

Thanks!

[@evanoeva89]

I have atc interview this november, this tutorial helps me a lot! thank you!

[@AviationPro]

You're welcome, good luck!

[@pizzahut99]

I wrote all this down, you just saved my life from getting calls wrong on VATSIM a, THANK YOU

[@AviationPro]

I'm glad to hear that, thanks for watching! :)

[@asj511]

+AviationPro That was very informative. Thanks!

[@AviationPro]

Good to hear, thanks for watching! :)

[@GamingwithMusa]

i love when he says "bye bye"

[@MrPuciek]

Very informative video and I love that you chose Polish LOT!

[@AviationPro]

You're welcome! :)

[@joshdennison5335]

Thanks really helped me a lot wrote it all down so I don't forget and it will help me on my first time on vats I'm

[@AviationPro]

You're welcome! Good luck with your first flights :)

[@Minalover100]

This is so informative and so much fun. Thank you for your videos.

[@AviationPro]

I'm glad to hear that, thanks for watching! :)

[@speedbird1598]

Hey, when is their most coverage on vatsim? I did a flight from KSEA to EGLL and after KSEA I had no coverage!

[@Aviation-di9em]

EGLL should have a lot of coverage

[@anas7088]

Amazing video I’ve got a lot information thank you

[@MaxBeckett]

A point to add, you touched on briefly. If there is an incoming aircraft for example, you could be give a conditional taxi/clearance. This is where the controller would say: "LOT1364, behind the arriving Lufthansa A330, runway 25C, line up and wait behind." Fairly self explanatory but getting the RT perfect can be a challenge. Good vid by the way

[@AviationPro]

Max Beckett Yes that's true. There is a lot of R/T that is not mentioned in this video and that would probably go beyond the scale of the P1 course. This just gives a basic idea of some of the communications involved from departure to arrival. All the other R/T can be learned through getting experience and doing additional reading. Thanks for watching, subscribing and commenting! :)

[@MaxBeckett]

+AviationPro agreed, it was only briefly mentioned in my P1 sessions (I did it though VATSIM UK) but it's useful to know for controller ratings and future ratings too. Keep up the good work

[@dtown1355]

Max Beckett Should be noted conditional statements are not allowed in the US from controller to pilot, only controller to controller.

[@davidwebb3134]

This is a aircraft. Graphics is amazing. What is this mod and where did you get it. Thanks for sharing this tremendous tutorial. Stay safe.

[@Steezlesss]

This helped ALOT! thank you.

[@AviationPro]

You're welcome!

[@Jodydoc]

Very informative and helpful as I'm close to entering the network. Thank you.

[@AviationPro]

You’re welcome, good luck!

[@SealStudiosAviation]

Amazing and well done! This tutorial helped me so much! :D

[@severin1517]

very usefull help for beginners. Thanks a lot

[@AviationPro]

You're welcome! :)

[@darthslather89]

installed it today i am pretty sure, that even though i've been playing fs for over 7 years now, this will be something new for me

[@zabre1199]

how'd it go?

[@luisjorge4946]

Hello. I´m about to make my first flight online :) don´t seem very complicated actually, but i have some questions: 1- can i accelete the time in case of larger flights? if i do so, what will happen in practice? 2- who can i know wich charts atc are using to control the operations in the aiport( for taxi, SIDs, STARs, etc) Excelent video helped me a lot ;)

[@AviationPro]

+Luís Jorge Hi! No you can't, that's not allowed if you are flying online on VATSIM. What you could do though is sign off, accelerate time, and then at some point go back to 1x speed and sign onto the network again, however that is still a bit tedious in my opinion. ATC use the same charts and procedures as pilots do. If you mean that you need to know which runway is active: just listen to the ATIS or determine that yourself by looking at the wind direction at the airport :)

[@luisjorge4946]

Thank you so much. One more question i forgot to ask. If a log in with an addon aircraft, lets say, airbus aerosoft extended, if the other people don't have that software in their computar how they or what aircraft they will see?

[@AviationPro]

They will see an AI model if they have done some proper model matching. You don't need to have the same addon installed for that, just a basic model from addons like Ultimate Traffic will work as well.

[@luisjorge4946]

+AviationPro thank you so much for the help. cant wait to start. nothing better to improve comunnications and best way to approach the real thing !!!

[@AviationPro]

Absolutely! Good luck! :)

[@jumbojet747ful]

Useful video as always nice that you fly 767 with Polish Lot livery. Now these great planes are being replaced with 787. In my opinion in Dreamliner cockpit there is to much screens I prefer mix of the analog instruments with electric ones just like on 767 and 757. Well the only exception is 777 in my opinion the best flight deck so far ;-)

[@AviationPro]

Thanks! Yeah me too, I don't like those big screens on the 787 either. I'm glad they kept the yoke in there though ;) Thanks for watching! :)

[@mikeprice6877]

Noticed one thing missing, when tower gives you clearance to depart with wind direction and speed, they will also verify altimeter setting as in LOT123 wind 210 at 10 gusting to 15 altimeter 349 cleared for takeoff.

[@KriVaDesign]

Not sure whether this is the case everywhere, but where I work, the Pressure setting is given with the taxi clearance. The AIR/TWR controller only specifies it if it changed in the time between being given the taxi clearance, and the actual take-off clearance.

[@lenedfm499]

hello, thank you for doing this - it has helped me a lot. großes Dankeschön!

[@AviationPro]

+Len EDFM Thanks for watching! :)

[@MayurWCAM3]

Can you please explain what does "Information Delta" actually mean? How do you identify that your information is Delta ? And thanks for a great video Sir !!

[@AviationPro]

Thanks! It's the identifying letter of the current ATIS information. When the ATIS changes, the letter is updated as well so that you can be sure that you have the latest airport and weather information.

[@leotend]

Hello, if you don't mind some suggestions, the aviation language is English. Whoever listing your tutorial (maybe because that person is new to the ATC-ommunication), the best way is if you keep the English communication. Thanks on behalf of the new students...

[@Tedaeus]

Prachtig werk Aviation Pro!

[@AviationPro]

+Theo Langenberg Dankjewel Theo! :)

[@iwyarchive7382]

I Love the 767

[@AviationPro]

Me too :)

[@youwillforget]

the video is so useful! thxs! oh and btw sometimes i need to standby for awhile ;-;

[@rohansavani7463]

Thanks sooo much! So informative. Keep it up

[@AviationPro]

+CaptainRo That's good to hear, thanks! :)

[@rohansavani7463]

+AviationPro welcome!

[@carstenbohnsack1580]

You make excellent videos.

[@AviationPro]

Thanks! :)

[@oolinooli6513]

Thnak you very much for this vid very helpful

[@AviationPro]

You're welcome! :)

[@tennisfan1668]

Could you please list the addons used in this video? Thank you!

[@darwn977]

Great video. Thanks for making it.

[@AviationPro]

Thanks, you're welcome!

[@leotend]

Your tutorial running on what Flight Sim program?

[@adm7790]

Dank je vel

[@piotromiecinski189]

Awesome tutorials! Thanks a lot :)

[@AviationPro]

Thanks, you're welcome! :)

[@Capt_sal_b777]

Excellent Work ..thanks

[@AviationPro]

You're welcome! :)

[@josuejosue5546]

Very clear , thanks a lot.

[@AviationPro]

You're welcome!

[@switzerlandtravel2306]

Extremly thanks captain

[@swedishgamer4272]

Hi what type of airplane add on you use for the B767 then Im mean like example pmdg or Ifly u know.

[@AviationPro]

It's the Level-D Boeing 767-300ER.

[@infiniteVidz]

How do you know what the ATIS frequency is?

[@jonasmller6962]

Where do I Ask for clearence?

[@35614bambam]

Hi, how do you monitor Unicom and know when to tune into active frequencies

[@AviationPro]

By tuning 122.800 in your communication radio. A controller will send you a contact me if you are entering his/her airspace. Alternatively, you could contact them yourself if you know you are about to enter their airspace.

[@darthslather89]

when i am a cessna 172, what do i say at first? like, i have no destination, i just want to fly a circle around the airport or stuff like that?

[@saml1361]

What is DME mean and what is the SIDS used for?

[@sarvesh156]

hello dear..thks a lot for such a useful video. .had a great experience of vatsim jst bcos of u..but have a little problem..i want to knw what is unicom feq..cos till take of everything was fine..aft takeoff controller told me to tune unicom feq.As i tried to make contact with them. i got no response from.plz help

[@pmaticla4033]

When you do virtual airline does the vatsim programme already have all of the repaints +AviationPro

[@AviationPro]

They usually do I think.

[@wendt17]

SULUS what is that?? what is stands for and where do you find the infomation for that

[@AviationPro]

SULUS is the name of a waypoint. Waypoints have names which generally don't mean anything. In this case SULUS is the first waypoint of a Standard Instrument Departure (SID)! :)

[@christerhansen-nilsen2725]

Has this changed over the last years

[@ellismalone1622]

Hiya, thanks for these videos they really help for first time users like me. Before I connect I just want to ask a question which is, if you are on Unicom for when on the ground for departure, and there is no ATIS, how would I know which runway is the active runway for takeoff/landings?

[@AviationPro]

+Ellis Malone Thanks! Check the weather and based on the wind information you can pick your own runway ;)

[@adamheene5616]

Do they have places in vatsim where you can train and they give you lessons or do you half to train yourself. Thank you

[@AviationPro]

There are, they are called ATOs like the VATSIM Pilot Training Academy you see here, or for more personal training there are others listed here: ptd.vatsim.net/atos

[@cilva7able]

So you can use this as a flight simulator as well? Not just ATC?

[@AviationPro]

It's a network. You connect with your flight simulator (like FS2004, FSX or Prepar3D) to this network so that ATC can see you and you can see other pilots.

[@pgnutter]

Do you have another screen showing which controllers are on or if a controller is just about to go off? Thanks

[@pgnutter]

Also, if an aircraft on your frequency is only on text, can you read his communications with ATC?

[@AviationPro]

I usually use my laptop for that. It runs squawkbox so I can see what air traffic controller are online, or by using servinfo for example. And yes, as long as you are tuned in on the active frequency, you can also see text messages from other pilots in your pilot client.

[@Test-Pilot1194]

Is the gear still down at 17,000ft+ ? Great video. 👍🏻👍🏻

[@AviationPro]

Nope, it’s in the off position :)

[@BMG734]

MORE VATSIM VIDEOS!

[@AviationPro]

One is coming up very soon! :)

[@BMG734]

i can not wait! xD

[@Dg-zj6jo]

good sim what is it please

[@purpl3rin0]

The first waypoint is SULUS why you say then 8G behind, and what is wilco??

[@AviationPro]

Wilco = will comply. 8G is the identifier for the Standard Instrument Departure (SID), it's just a name for the SID. When this SID changes, they update the identifier, so then it becomes SULUS 9G for example.

[@charlielan]

If there's no clearance delivery and ground tower at the airport, then who should I contact to?the tower?

[@AviationPro]

If only ground and tower are online, contact ground for clearance. Please check this out: aviationpro.nl/vatsim/faq/communications/which-atc-station-should-i-contact/

[@charlielan]

+AviationPro thx!

[@hoanha9852]

Hey guy where did you get that cool 767? payware or freeware?

[@AviationPro]

+Hoa Nha It's the Level-D 767. You can buy it over at flight1.com ;)

[@hoanha9852]

+AviationPro And EDDF?

[@Kylem6875]

Great video but what does the controller say when you're being handed off into non controlled airspace? Just tune to Unicom?

[@AviationPro]

Yes, the controller will tell you to monitor UNICOM on 122,800. Some controllers might just say "frequency change approved" implying that you switch to UNICOM yourself.

[@Kylem6875]

AviationPro Okay thanks! I'm going to start my first VATSIM/ATC flight within a couple of days, and watching these videos are a great help!

[@AviationPro]

Nice, thank you! :)

[@anspailpinfanach7887]

What does the info mean? Alpha Bravo Charlie...

[@AviationPro]

***** It's the identification letter of the current ATIS. Please see this page: aviationpro.nl/vatsim/faq/communications/what-is-atis/

[@brandonwhite2231]

When ATC says "wind 230 at 16 knots" does that mean the wind is going towards heading 230?

[@AviationPro]

No, it means from.

[@hoanha9852]

But how can I get the name of information( alike Information Alpha)?

[@AviationPro]

You have to listen to the latest ATIS information if it is online at that particular airport on VATSIM. Or get the controller info via your pilot client of the air traffic controller if no ATIS is online.

[@hoanha9852]

thanks

[@nomemtube1042]

WHAT AIRCRAFT DID YOU USE AND IF THERE IS NO DERLIVERY SHALL WE SAY THAT TO GROUND

[@AviationPro]

+Mamon Amour No need for turning on your caps lock. It's the Level-D 767 and yes you have to contact ground in that case.

[@nomemtube1042]

ROGER THANK YOU, SORRY BUT THE CAPSLOCK BUTTON IS STUCK I WILL FIX IT NEXT WEEK END THANKS AGAIN YOUR TUTORIALS ARE VERY HELPFULL

[@rafalepkk]

Good job!

[@AviationPro]

Thank you! :)

[@bordeath]

Hello! Amazing video! It gonna help me a lot, thanks for posting this! Just 1 question... where can I find departure charts like in the minute 10:35?

[@AviationPro]

+Bordeath C. Thanks! You can find charts very easily: kzbin.info/www/bejne/sHfWcmyviJaAopo

[@makuoike680]

What is this “information you have” like information alpha? Where do I get this information and how do I know what information it is?

[@deles2181]

You have to put on your radio the ATIS frequency of the airport, which you will find in the charts. Then, you will listen to a voice message that is going to give you all the information you need of the airport, including the time when the meteorological report was generated (in UTC). This includes runways in use for both departures and arrivals, approach procedures and any other relevant information about non usual operations at the airport, like Low Visibility Procedures or a closed taxiway. It also gives you the wind, horizontal visibility, ceiling, QNH, temperature and dew point. When you listen to this record, the first thing you will hear is "This is (name of the airport) ATIS information (letter)". That letter is the way that the controller has to know if the pilot has an updated information about the airport or not. The letter changes every time a meteorological report is generated (between 30-60 minutes) or something important happens at the airport (change of the runway in use). At the end of the record, you will hear "Advise you have ATIS information (letter)" and that's the letter you have to say to the controller in the first contact, so they can know if you have the current information. I hope you were able to understand me, since my English is not really good

[@makuoike680]

Pablo Peña that was clear and concise. Thanks

[@ehss192]

@@deles2181 Awesome. Thanks for the explanation!

[@Ziploz]

Can somebody help me what QNH means? Sometimes when i do clearance for take off they would say something about QNH *. Do i need to change the altitude calibration knob? Please help thanks

[@NiklasxBantz]

QNH means "Query: Nautical Height" and indeed you need to change the altitude calibration this is done to ensure your altitude readout is correct for the area. After departure and you have climbed out of the area you will change it back. Hope it helps :)

[@Ziploz]

@@NiklasxBantz Thank you so much!

[@ericc7936]

what plugin is used to show the passenger walk way to the plane and is retracted after all passengers have boarded

[@Vlaxie]

Airport Enhancement Services by Aerosoft, unfortunately it's only compatible with a number of payware airports

[@Malloriak]

Hello. I have question. In MSFS 2020 pushback is not always available. VATSIM dispatchers knows when pushback available? And second question. What shall i do if i roll off from taxyway into grass and stuck there?

[@Prodigalson55]

Call for a tow😂

[@Munky332]

what do you do if you are flying through airspace/sectors not currently being controlled? what if you are flying from a minor airport that usually has no clearance/ground/tower/departure controllers, but still wish to fly with Vatsim protocols?

[@AviationPro]

You monitor UNICOM (122,800) while flying through uncontrolled airspace. At such airports you would just follow real world procedures and fly yourself. If a radar controller is online he could provide VFR information etc.

[@imjustpro1236]

They ask my for my transition when I ask for taxi to the active

[@AviationPro]

ImJustPro123 I'm not sure what you mean, they ask for the SID you use? Could be because they want you to takeoff from a specific runway for your SID.

[@imjustpro1236]

AviationPro Oh ok "Sid" now I know what you mean. Thanks!

[@ericc7936]

is the lot number the call number for plane? or what is it? thanks

[@ericc7936]

how or what is the lot #

[@AviationPro]

LOT is the airline we're flying in this video, and their callsign is simply 'LOT'

[@TheWorcestershire001]

121.8 is my local airport's ground frequency

[@mercenarytiger5984]

Hey AviationPro, which airport should I use for VATSIM? Like, should we download an AFCAD airport or the default airport or the payware ones? Which airport will the atc tell the taxiways? Im really confused about it.

[@AviationPro]

It's best if you use an addon airport, which are usually more up-to-date than the default scenery. Payware is of course nice for the looks, but usually there are also freeware alternatives or AFCAD updates. The ATC will work with the present airport layout, so according to the latest charts. If you can't find an up-to-date scenery just try to locate yourself on the chart and determine what the taxiway letters and gate numbers around you are as if you were flying at the airport in the present layout.

[@ma3n636]

If there is no delivery can i call for clearance from another tower like the ground tower. Thank you

[@skipperfromppd2447]

You ask clearance to controller that is in the lowest position. E.G. Center and App/Depp are online. You would ask App/Depp for clearance.

[@ma3n636]

How can i program the waypoints on a normal FSX plane

[@AviationPro]

+Maen Dofash Yes to your first question. And you could program waypoints using the default GPS but its data is outdated and its not realistic. It's better to use an addon with a FMC.

[@ma3n636]

+AviationPro Ok thanks, i have a plane with a FMC so il try to learn how to use it

[@bubudok49]

which flight simulator software did you use to make this video?

[@AviationPro]

FS2004

[@bmv91w]

what aircraft are you flying here?

[@AviationPro]

The Level-D Boeing 767-300ER

[@anonym9929]

While in flight, is it okay to disconnect from vatsim, pause the game and do something else, and then continue play and connect again?

[@AviationPro]

Not really sure. Some people disconnect, let the airplane fly and then at some point connect to the network again, so that's kind of similar. Not really sure if it's allowed.

[@anonym9929]

AviationPro Okay. Thanks for answering :)

[@ragsandtanrex373]

What does wilco mean?

[@AviationPro]

+RagsAndTan Rex "Will Comply" ;)

[@manlypeeps]

What aircraft add on is that

[@AviationPro]

Level-D 767.

[@mc-help4719]

what if there is novatis?

[@AviationPro]

Then you look at the wind direction in the METAR to determine the active runway yourself, or request the controller info if a controller is online, because in their description then they usually state the active runway.

[@buchanan2000]

What fmc u using

[@AviationPro]

It's part of the Level-D Boeing 767.

[@TheBigLez]

Im starting out with Vatsim and am a tad bit confused. First, do i have to be connected to fsx multiplayer or can i be on free flight, and if im on free flight then how will the atc tell what other traffic may be on my taxiway etc. ?

[@AviationPro]

You start a free flight at the gate and then you connect to the VATSIM network via your pilot client. ATC will have a radar overview of the ground and the airspace so they will give you instructions via the radio. Visit vatsim.net for more information.

[@TheBigLez]

Thanks mate. Also great job on the tutorial videos, i actually feel a slight bit of confidence to fly on a vatsim network from watching them.

[@AviationPro]

Thank you! :)

[@SuperGennaro11]

hoe kn je praten via dat moet je dan wat indrukkken ik gebruik squawkbox

[@AviationPro]

Ja, je moet je Push To Talk (PTT) indrukken, bij Squawkbox is dat standaard Scroll Lock.

[@SuperGennaro11]

thanks:-)

[@tomohisa3049]

bye bye

[@AviationPro]

bye

[@unclealig]

hi, how do you request a VFR clearance if you will arrive at the same airport, with going out of the CTR (like here in the video @03:15)? thx

[@AviationPro]

+unclealig VFR flights (in Europe) usually don't get a flight plan clearance like this, usually just a start-up clearance with some extra information like the QNH and the altitude you should be flying at. The way this startup clearance looks like also depends a bit on the country and airport, but here's a good guide with some more info about VFR phraseology: www.atac.ca/web/images/Documents/Phraseology%20Guide%20for%20GA%20Pilot%20in%20Europe.pdf

[@ikkeennigij121]

something I noticed in vatsim when on the ground (not frequency, literally the ground) is that other aircraft slide when cornering. What I mean is that I don't see any wheel animation. Is this normal?

[@AviationPro]

+ikkeennigij121 That's quite normal. Flight simulator does not really have an very advanced multiplayer system and it also depends largely on the refresh rate you have set in your pilot client. The higher the refresh rate, the more smooth the other aircraft will move, but the more load it takes.

[@ikkeennigij121]

AviationPro That's great, thank you for your prompt reply! I understand you're doing your atpl aswel? how's it going?

[@AviationPro]

No, I'm not in flight training at all ;)

[@ikkeennigij121]

+AviationPro oh ok, keep it up !

[@AviationPro]

Will do! ;)

[@patrikstreng6834]

I've got a question. There is fsx, fsx steam and p3d. If I connect to vatsim will I only see people from the game I'm playing?

[@AviationPro]

+patrik streng No, you will see people regardless what type of flight simulator they are using. That is what makes this "game" so unique: different simulators (Xplane, FSX, Prepar3D etc.) can be used to connect to and fly on the same network :)

[@patrikstreng6834]

Cool

[@Loliki8k]

Are there any alternatives to VATSIM?

[@AviationPro]

Yes, IVAO or pilotedge

[@Thomashorsman]

What does SID mean

[@AviationPro]

Standard Instrument Departure

[@THEBEST-cz4rf]

this is not FSX ?

[@AviationPro]

+THE BEST No, this is FS2004 :D

[@maiksir73]

is this fsx?

[@AviationPro]

No, FS2004.

[@pavelgrulich2989]

Can speak to the ATC in czech or I must talk in english if I'm in LKAA FIR (czech airspace)?

[@AviationPro]

You could, but it is not desirable and not according to the rules really.

[@Brooks__EU]

@@AviationPro If he flies VFR that's a different story though :D

[@danialparviz4036]

Danke shön

[@AviationPro]

You’re welcome!