Vauxhall/Opel Meriva B multiple warning lights ON... Fault finding and repair.

Consider to support my channel and all the hard work put into it at / lmautorepairs
Thank you
Hi
This 2010 Meriva came to me after someone else had a look at it, actually, that someone found something quite valuable, on which I started to work on and lead me to found the actually problem...
Unfortunately, could not make is a "no parts required ", but hope there is some information here that might help someone out there...
Follow me on this video to find out what was the problem and how to resolve it.
Hope you enjoy the video.
Any questions or comments put them below.
Like always, thank you for watching!

[@mindapothecary]

Nice way to end the year: With another long format fault finding and repair. Wishing you and all your viewers a prosperous new year

[@LMAutoRepairs]

☺️ Thanks! Happy New Year!

[@andrewyeo2353]

Mmmm did you miss the fault with the fuel guage it was showing half tank full thats not right for your cars 😂😂 happy new year mate

[@LMAutoRepairs]

🤣

[@yiannakosautomotivekeys2380]

It's always the case Luis. The cars go somewhere else and cannot be fixed.Then they come to YOU (the expert). Should be proud my friend!!!

[@LMAutoRepairs]

☺️ 👍👍👍

[@yiannakosautomotivekeys2380]

@@LMAutoRepairs HAPPY NEW YEAR TO YOU & YOUR FAMILY. GOD BLESS.

[@LMAutoRepairs]

Thanks! Happy New Year!

[@markdavies9765]

excellent video. Have had an identical issue on a 2018 Astra with a cracked expansion tank. Put a used abs module on it as terminals had rotted away!

[@LMAutoRepairs]

☺️ 👍👍👍

[@craigrice1960]

Code 128 is a sensor in the bonnet catch malfunctioned

[@user-jg6vw3em9f]

Hi Luis, Excellent diagnosis and repair resolution replacement of the faulty ABS unit. You will soon have many faulty car queuing outside your garage and looking forward to seeing many future repair videos. Looking forward to seeing you break the 100k subscription barrier in 2024. Happy New Year to you and your family and thanks once again for all the hard work in uploading educational auto repair videos. 😊

[@LMAutoRepairs]

Thanks! Happy New Year! 👍👍👍

[@isalmankhan1]

Happy New Year to you and your Family🎆🎆🎆 What a year it has been, so blessed to have teachers like you looking forward to many more years ahead of learning & excitement🙏🏻🙏🏻🙏🏻😍😍😍 Stay Blessed BRO🙏🏻🙏🏻🙏🏻

[@LMAutoRepairs]

☺️ Thanks! Happy New Year! 👍👍👍

[@user-kk2bo4de8m]

Its not really failing its going into accessory mode intermittently , good video and diag as always , happy new year to you.

[@LMAutoRepairs]

😂 👍👍👍

[@snik2pl]

32:22 maybe moisture in internal plastic connections. Could try bake it from curiosity but new used pump is the right way to go. Also wires are silver so not soldible

[@LMAutoRepairs]

Could be... 👍👍👍

[@MrByootox]

Knowing the toplogy of the car your working is handy if you have a network fault. good video as usual Louis and a happy new year fella 🎉🎉🎉

[@LMAutoRepairs]

Yes it is! Thanks, Happy New Year! 👍👍👍

[@catalinmaris6887]

Wish you and youre loved ones a happy new year! Thanks for all the knowlege that you share with us! :)

[@LMAutoRepairs]

Thanks! Happy New Year! 👍👍👍

[@gezdipz5425]

Great job Lois and happy new year I think the fuel gauge is faulty too half a tank lol,keep up the great content 👌

[@LMAutoRepairs]

🤣 Probably it was... 👍👍👍

[@jackiemay9471]

morning luis happy new year to you and the family ps dont push baby in the corner

[@LMAutoRepairs]

Thanks! Happy New Year! 👍👍👍

[@jackiemay9471]

hope the trainee is in on minimum wage plus@@LMAutoRepairs

[@Fabi....]

Happy New Year 🥳🥳

[@LMAutoRepairs]

Happy New Year! 👍👍👍

[@nemanjadzombic6101]

Thank you for another great video!!!

[@LMAutoRepairs]

Thank you for watching! 👍👍👍

[@v8motors.]

Great fix, I guess you could have joined the CAN pins on the connector to prove the integrity if you didn't have a spare ABS pump. As for Bleed Bleeding or Blead the correct one in your situation would be to use Blead.. The other two are used when doing the function I'll bleed the brakes or I'm bleeding the brakes, thus in the process of doing the job. Blead is after you finished the job. The brakes are Blead.

[@LMAutoRepairs]

☺️ Thanks! 👍👍👍

[@vladisnovi]

Very good job! :) Keep it up, lookin forward for a new content!

[@LMAutoRepairs]

☺️ Thanks! 👍👍👍

[@justcarkits4532]

Fairly typical cost cutting maintenence - a few quid for a new cap ends in a much bigger problem. Good diagnosis and the thick film hybrids are not really field repairable even though it's probably just the corroded connector that needs replacing.

[@LMAutoRepairs]

☺️ 👍👍👍

[@mrgrumpy5116]

😊👍happy new year

[@LMAutoRepairs]

Happy New Year! 👍👍👍

[@rodwanbornaz1282]

Thanks for sharing.

[@LMAutoRepairs]

Thank you for watching! 👍👍👍

[@andyh4580]

Hi have same problem where are you based need help thanks

[@ibby_786]

Well done 👏

[@LMAutoRepairs]

☺️ Thanks! 👍👍👍

[@Doctor_88]

Can you tell how you find diagram of module topology for cars..I tray google but noting.Because I now that your model Autel dont have topology

[@LMAutoRepairs]

Some you find on wiring diagrams... 👍👍👍

[@jptrainor]

Service manual.

[@Doctor_88]

@@jptrainor 😅

[@simplemechanics246]

Why you did not bypass the unit for testing? In and out cans jump and if that was end point, then terminate the end

[@LMAutoRepairs]

Guess could have looked into that...☺️ 👍👍👍

[@anapaulapereira3255]

boas entradas

[@LMAutoRepairs]

Igualmente! Um bom Ano! 👍👍👍

[@Alex4ndru1989]

Hi! what model of autel is it?

[@LMAutoRepairs]

Hi MS908P 👍👍👍

[@jhonjhon282]

I have opel meriva 1300 diesel 2008,and flashing lights resistor?!any idea

[@LMAutoRepairs]

Have you scanned the car? 👍👍👍

[@jhonjhon282]

Hi

[@LMAutoRepairs]

👋 👍👍👍

[@Vader74]

legendary 1.7isuzu last opel engine, now all fiat and psa -ford

[@LMAutoRepairs]

Indeed... 👍👍👍

[@Poulpy68]

If it is an Isuzu motor it's not an Opel Motor 😊

[@wackey3455]

Hi Luis excellent video again thank you kindly. I heard you say that if the abs doesn’t work that you be able to reflash the unit can you tell me what tool do you use to reflash. Thanks Luis. O I often get my kid to pump brake pedal. I think it goes pump. Hold it and pump again there very handy when stuck doing brake job not to say 10 or 15 quid afterwards

[@LMAutoRepairs]

I would have tried to program it using SPS... But that would probably fail as the unit was from a Citroen, as I mentioned... 👍👍👍

[@wackey3455]

@@LMAutoRepairs Thanks luis

[@JeanMelim]

It's a Christmas Tree Light 😅

[@LMAutoRepairs]

🤣 Fits well in the season... 👍👍👍