Milwaukee M18 FUEL HACKZALL Has A Special Feature Inside!

[@MrMuffanga]

Got fuel hacksaw,fuel grinder,fuel drill, fuelimpact driver, two 5.0 and charger and packout all for $500 at home Depot

[@i_know_youre_right_but]

I need to move to America.

[@jtfox8851]

That’s a steal

[@drghjtyiij]

I paid $400 for a fuel m18 drill and impact with charger and 2 big batteries. So that’s a crazy steal !

[@psulax425]

I got the sawzall in the combo pack and then got the hackzall as a gift and wondered if I’d really use the hackzall. It’s become my primary go to saw for household/DIY stuff. Great tool!

[@cristianavelar9555]

As a service plumber man this tool is the way to go ! Best invest I’ve made !

[@stephenleepmg113]

Hello everyone, I have the Milwaukee 12V fuel version. It is a money maker, and I have been using it for a couple of years. As a side note. It cuts up a pork loin really really nicely !!!!!

[@coolcurry77]

what do you use the 12v version for

[@msmorales150]

Pork loin

[@FBRJ1122]

Emt?

[@jdreynolds29]

I've had my M18 fuel hackzall for about 2 years now and I absolutely love it. I just got my M12 fuel hackzall a couple months ago. I've only used the M12 once so far but as work starts picking back up in Spring I'm sure it will give me the opportunity to use the m12 more. I do wish the M12 had an articulating shoe like the M18. I guess I'll figure out which one I like more as I have the opportunity to use m12 a few more times. Another thing that I have noticed about the M12 is that it does not have a drain hole on it like the M18 does. This drain hole could come in very handy when using it for cutting pipes that still have water. That being said anytime I'm reaching for one of the two to cut a pipe with water in it it's definitely going to be the M18. Most people don't even know about that feature of the M18 hackzall and therefore they do not realize that the M12 hackzall is missing that feature

[@gusc6785]

since u have both you think its possible to get a m18 shoe and put it on the m12 so it can be adjustable ? are they the same size

[@jdreynolds29]

@@gusc6785 sorry I just now saw your comment to me. I just looked at both of them. I did not take them apart to try it, but they do both look to be the same except for at the end of the shoe where the M18 pivots. So that being said, I would assume that your idea would work

[@jasonguthrie3515]

Love that tool, gotta say that form factor is superior, pushing down from above the blade vs pulling down below the blade.

[@PhysiqueGeek]

Absolutely love my M12 Fuel version for making cuts in PVC and some light duty demo stuff. I only find myself going for the M18 fuel sawzall for the most demanding cuts anymore. Love the channel Vince!

[@jasonweb9720]

Had mine for one year and love this saw!

[@johnaba5683]

That's very cool with the articulating head and everything I have the same exact one that I bought for a very good price summertime when I got that extra Stepside bed for my truck that's what I used that I told you about for cutting that one bed bolt and it went through it like butter

[@SGaryNinja]

You are a top notch creator. Thanks for the clean channel.

[@motblc362]

Can the Hackzall cut ABS ??

[@johnaba5683]

Absolutely love mine mine came with a battery as well trying to remember what I paid for it was last summer it was a great deal I couldn't pass it up

[@xuser9980]

For gardening, that's my go to!! Stick a Diablo pruning blade on, good to go!!

[@tannerwharton4670]

Yess!!! You guys got the m18 FUEL hackzall! Thats my right hand at work everryyy dayyyy!!!

[@dakotabobbitt6887]

I will forever be in your debt if you can talk Milwaukee into making an M18 Bench Grinder that mounts to the Packout System.. Or possibly have an riser attachment to mount to your hitch... It would be so so so so awesome lol

[@irmaztamal21]

7:41 best part of this video

[@houstonsmitherman6888]

Bought the fuel hackzall 2 days ago. I do HVAC I've yet to use it but I'm excited when I do

[@michaelc7283]

Vince, I feel DeWalt should had made this exact size and stroke hackzall for their regular 20v tool line. The atomic model is a little under power and lack of speed. Maybe they will make a another model for the regular 20v line. The DeWalt atomic tool line does have a few hits and misses. I have the milwaukee m18 fuel hackzall and i do like a lot. I use a diablo blade and the new 8.0ah battery and it's awesome. Just remember everyone the hackzall is not going to do a whole heavy demo job. Just use the right tool for the job. Enjoy the new tool and can't wait to see the TTR.

[@JWimpy]

I've had that one for a good while now and it's great. I use it for all my Sawzall cutting unless I'm doing demo. Then I get out the big M18 Fuel Sawzall.

[@treebossmike8818]

Yep, ya kinda waited too long to pick up this gem of a little tool. I purchased the kit when it first came out, and thanks to a pricing snafu at the Depot I paid $199 (better deals have popped up, but typically you pay $249 and up). Awesome tool, way better than the brushed model. I have all the M12 and M18 Hacksaws, of course the Fuel iterations are far superior than the brushed models. Great tutorial as always Vinsanity!

[@VCGConstruction]

Thanks Mike we appreciate it!

[@michaelb4609]

Only complaint I have... after using the bosch version, I really don't like that the battery loads in from the back of the handle. It's a bit awkward loading into the back vs the front, but the worst part is that it's forward heavy and doesn't like to stand up... at least with the 5ah battery. If they had only made it so that the battery loaded in from the front, it would stand up fine. Thats something I've really come to appreciate with the bosch, especially when I'm on an a frame ladder.

[@Zee20Ate]

Let’s not forget, the guy that’s starving and wants a sandwich, is doing you a favor by taking the time and creating FREE content for you to watch. I think he’s earned his sandwich🥪 !!!!

[@effenfish661]

i throw a long pruning blade on my hackzall so i can have one hand on a ladder and cut a limb with the hackzall. also use it instead of breaking out the chainsaw when cutting small trees at ground level.

[@alejandrcastaned8120]

Saludoss desde peru mister vince. Lo maximo en herramientass💯👏👏

[@josephmalinowski6817]

Also the Milwaukee rip saw Anna Milwaukee Sawzall both have 3000 Strokes per minute which is pretty good for a small Sawzall but does get hotter faster than the bigger one

[@erikramos3188]

I used my m12 to cut my thermostat housing rookie mechanics since I don't have baby hands it did the trick

[@Casper10M]

Should I get the m12fuel or m18fuel?

[@ManCaverTools]

Great unboxing. I gotta pick that up soon along with the M12 Fuel version

[@soundmapper]

Just ordered this. I don't have a specific need, but the current deals I could not pass up.

[@jamesfurlong7644]

What is the difference of that 1 over the longer 1

[@rdude8579]

Love that hacksaw cuts castiron like butter

[@ericbrookhart5780]

Hey has there been a TTR with any routers? I looked through old videos and didn’t see it. I might of over looked it. But I think a updated review of routers would be super helpful. Thank VCG!

[@robertbates8599]

Thanks again Vince! Love your reviews and makes my decisions so much easier when it comes to tools! Funny, entertaining and educating.... by far the BEST out there! Have a great week and can’t wait for the DYNAMIC DUO this weekend!

[@VCGConstruction]

Thanks Robert, we appreciate you!

[@jdreynolds29]

@@VCGConstruction and we all appreciate you

[@pughconsulting]

I got this and the Sawzall. Took back the Sawzall because for my needs the Hackzall did all I wanted and it was so much lighter.

[@roadeomagic]

I have the M12 version, love it!!

[@MrHowieZ1973]

Why didn't they go with the one inch stroke? The Kobalt Nick burned up was one inch stroke

[@mikezeke7041]

Shorter stroke cuts closer up against walls etc without damage

[@kingofthecrease30]

and you saw how long the kobalt lasted 😂😂

[@michaelc7283]

I guess the 7/8" is the magic number for the stroke on the hackzall. The 1 inch hurt the Kobalt hackzall. The 5/8 inch stroke on DeWalt hackzall is not fast enough Milwaukee 7/8 inch stroke. Just right, LOL...

[@MrHowieZ1973]

@@michaelc7283 The DeWalt has an inch and an eighth stroke and it smoked this saw in TTR

[@michaelc7283]

@@MrHowieZ1973 I think you are comparing the wrong one. The DeWalt 1 - 1/8 is the compact reciprocating saw. The DeWalt 5/8" stroke is the atomic hackzall (handsaw) model i was talking about. You are correct the DeWalt compact reciprocating saw Won. I hope dewalt can come out with a new version with less vibration. That's also a good size reciprocating saw.

[@claytonpalmer4325]

what is the special feature?????

[@ApacheChief]

Free pack of Skittles

[@foobar3139]

I’ve got one and love it. It feels like it works better than my corded DeWalt reciprocating saw.

[@hillbilly4christ638]

the ergonomics, the ability, the versatility.....the engineers got this one right. I look at my saw all and wonder why I ever used that thing.

[@mjc8761]

Like the unboxing videos & love the glasses 👓

[@bigrobbyd.6805]

I was able to get a great deal on a Fuel Hackzall on Black Friday. That sucker is far more powerful, and heavier, than I had anticipated, but it is still easy enough to use with just one hand. I love using it.

[@jesterraj]

How about the Skil powercore 12v recip saw ....id like to see yo review that.

[@colehvactech7117]

I'd like to see some band saw comparisons in the future like the m18 brushed the dewalt and bosch heck even Makita. Maybe cutting some unistraut,coper, and straut?

[@idoit4urmom]

Nobody that's used a few will argue that the Milwaukee M18 Fuel Deep cut is the best cordless band saw on the market

[@larrytheplumber9851]

Just got my M18 today can't wait to go cut some shyt up from pvc to cast-iron stacks Milwaukee all day son

[@halwiggam5465]

I have a 12 volt hacksaw. It is really reduces the vibration big time.

[@stevehorvat69]

Just picked this up from Home Depot today. Same model number as on your box. No blades included 😡. Calling Milwaukee on Monday to see if it should have been in the box or if Milwaukee no longer includes them.

[@bryanmagdalensky5715]

Did I miss the special feature inside?

[@956Laredo]

The blade I guess

[@13ryanheartbreaker27]

Yes I own that tool, and the M12, also the Dewalt....why? Because assistants forget to bring their tools 😑, or they’ve caught on that I roll with enough tools for three.🤔(eh whatever.) yes too long for you to finally pick that bad boy up, I think it was in Nov’2019 HomeDe had a buy two bare tools get a pair of M18 HO3.0Ah batts free, came to $308 after taxes (M18 Hack & M18 Surge, two HO 3’s) I felt good about it.... being that the HO3.0Ah are High Output, do they still get the power/performance bump? Or is that reserved for the 6 and up? Btw never get the six jump straight to the 8 same physical attributes... but I’m sure you know that already.

[@saidmario5616]

Yo Vince, how about a M12 fuel and a M18 fuel hackzall comparison? 🤙🏻

[@josephmalinowski6817]

Also do you see how much better this one is with the flexible head than the non flexible head from Milwaukee but I do love mine like I said the only thing is the LED light does not help but the more you use it he will see how fast that rubber starts to tear right below the light

[@VCGConstruction]

The articulating shoe is money!

[@Just_Putzin_Around]

First video from this guy, am I the only one getting Adam Sandler vibes from this dude, more specifically Billy Madison. With that being said decent unboxing video.

[@kingpinpkr316]

I love this tool.

[@stevenhobson2292]

Great for plumbing

[@josephmalinowski6817]

@VCG No bag have one lol but all kidding aside the only problem that I have with mine Milwaukee M18 brushless fuel is the rubber piece right below the LED light starts to rip first and then starts to rip and then depending how aggressive you use the Sawzall the rest of the rubber starts to rip more and more

[@larryvilla3438]

Thx I want one now

[@mattallen1660]

Yo dude it would be cool for ttr if you can do a Makita cordless pin/brad nailer

[@bradbriggson2615]

Try the red diablo wood metal pvc blade. Cuts pvc like nothing

[@thomasgrider2721]

I use mine as a back massage wand. Remove blade, go to town.

[@mariacarneglia8483]

Another great video and demonstration . Keep up the good job!👍🧰👍

[@Badass_Rooster]

I love mine been using it for years

[@nitrorc4life1]

Para3 is my edc rotation.

[@mattclapper955]

Who sells the knife?

[@VCGConstruction]

Blade hq

[@mattclapper955]

Thanks!

[@hebercardenas7909]

I gotta stop binge watching your videos

[@jamesgarrison6430]

It has the Same stroke rate I got

[@cjedenfield5902]

Love yalls channel thank you for the great info

[@jasoncrawford2561]

I hit the like button, because I am not a mean person

[@khalidaltamimi6062]

I would like to see please m12 fuel Hackzall. VS m18 fuel Hackzall

[@kundetjenesten]

I got one and love it to bits. I wish the shoe was adjustable in length like the Sawzall, but besides that I wouldn't change anything about it. And yes Vince, you definitely should have grabbed this one sooner! 🤣👍

[@suzesiviter6083]

I bet those Roy Orbison Glasses cost you a fortune in auction. I use the hackzall to cut bread, with the HO batteries you can even cut brown bread.

[@scottd7222]

This thing is the balls.. should cut a few different things not just PVC

[@DeadlyVenomKing]

I have 7 to 8 Long Stroke😁

[@jonahbert111]

I bought a generic hand tool with the same stroke length and speed, that fits Dewalt batteries that I have, for $46 + tax. I am nearly 76 yrs old, so. I am sure it is not the same quality machine as the Milwaukee, but it is lighter, and I expect it to outperform the equivalent Dewalt tool. It is coming on my birthday, just for fun you know.

[@mattallen1660]

Like smashed bro

[@VCGConstruction]

Thanks Matt, we appreciate it!

[@DJ-nu4ll]

Just bought my m18 fuel and impact & hacksaw combo w a battery & a charger for 270$ who found it cheaper ???

[@mikezeke7041]

Nice tool, but the life span appears to be about a year with heavy use.

[@kingofthecrease30]

i have the M12 fuel hackzall...it gets the job done for me....i think the M18 fuel hackzall is a little too big for one handed operation and i have big hands #justsayin

[@anonymousmc7727]

He steals catalytic converters an night;)

[@NonieTools]

Interrupts the review to review the knife he opens the package with 🤣 I bought one of these with the impact, hammer driver, multi tool (all FUEL), a 3.0 high output, a 6.0 high output, a 5.0, charger, bag and flash light for $600 from home Depot.

[@Ghostacc956]

It’s funny, the new packaging for this tool doesn’t include the blade in the picture anymore nor is it included in the box 😂🤦🏽‍♂️

[@joseluisdiaz3066]

Milwaukee super

[@barrettalen]

Just picked up one of the last of the special deals on Home depot. Com M18 Fuel & 5ah battery for 159$

[@chanduchandu3593]

How .Much It's .Cost Please SayIts. Rate Date. \20 \06 \2021

[@ApacheChief]

Home Depot. Bare tool $159 But if you buy the charger with 2 5amphour batteries deal for $199 you get a free tool from a selection which the M18 fuel hackzall is one of them.

[@sethcrawford6219]

Jesus saves

[@reedmagee2204]

Ta do dat

[@larrytheplumber9851]

Wht a character

[@stavrovoorhees2772]

Hearing u speak hurts my inner human

[@ArkamasRoss]

Somebody get that man a sandwich! Do not let that man go without a sandwich!

[@NickPixelTV]

;)

[@chanduchandu3593]

Do not Cheat Askers Mind

[@ParkwayJoe81]

Special feature? 🤦🏻‍♂️