Rebuilding the 2019 Sierra Denali after a failed landing part 2

Last time we did the bare minimum to get this GMC Sierra off the trailer. Now it is time to get it ready for the bodywork and get some straightening done so our parts fit after the bodywork and painting gnomes visit. Mr. Spotty was also returned as MyAirbags could not fix his attitude. I ordered a pizza for this job. Did I get a pizza? No, but I did get a little help.
My website if you want to purchase a car or parts: www.vehcor.com
Amazon store: www.amazon.com...
For Vehcor merch: teespring.com/...

[@moldingpro7208]

"The Land of Corruption and rust." No truer words ever spoken.

[@alexandermccarthy]

State motto isn't it?

[@vehcor]

It should be on our license plates, which coincidentally our past governors could make! 😂

[@Erichhh]

@@vehcor And current!

[@moldingpro7208]

@@vehcor Haha! True!

[@BrainsofFrank]

Have you ever realized that someone could technically do the exact same rebuild as you just by using your videos as a guide and you have explained things so throughly and completely.

[@vehcor]

That was kind of my hope.

[@11tbrock]

Problem is, I don’t have Paint Gnomes …

[@BiggusDickus2]

It's from watching this channel that I took on doing cab corners and rockers on my rust bucket.

[@1982MCI]

@@11tbrock I’m available to be a Gnome if your around NC, lol

[@thomaslemay8817]

Not one Secret in this video. And lots of people do this work every day. Most have more work than they can do it they do a good job.

[@jasonearp8720]

The more you work on these Denalis the more it makes me want one. Sunroof and all.

[@vehcor]

They are nice. Great on road trips with the trailer!

[@jasonearp8720]

@@vehcor what will this one go for when you are done? You seem to find some nice ones down in my area. As much as I would like to, just don't seem to have the time and definitely don't have the facilities to pull of the work that you do.

[@cwbuckley4508]

I am afraid that I am not much of a mechanic, but I really enjoy watching your videos.

[@fercecfe]

I’m just here to see who else noticed the 1/2 inch wobbling extension at work! As always good job man!

[@MikeyMack303]

Gave it a stroboscopic effect!

[@vehcor]

I noticed! 😂

[@465maltbie]

This morning when I went to work one of the car shops there had a similar truck with the front end pushed in sitting out front. I was thinking about time for an update on the truck. And here it is, thanks for sharing. Charles

[@moorsejames]

Love you channel. I look forward to your videos every Friday

[@vehcor]

Thank you!

[@juangatcia9281]

I want to congratulate you on your work in teaching us. I really like what he does. Here in Cuba I do something similar but with different tools and in much older cars. Whenever I see you working, I really want to work with you. Kind regards.

[@richardsalsbery1101]

The pizza lady is the real star of this show the guy is the side kick!!!:)

[@vehcor]

Well I wish she would do the editing!

[@kraignadjkovic5494]

@@vehcor stars don’t edit! pSh…

[@jerryrounds8586]

Always look forward to another video. Good times.

[@alexblanco9687]

And just like that, Spotty’s back in the game!

[@samiwafi3039]

Professional work. Thanks for sharing the video.

[@vehcor]

Thanks!

[@douglasburford8452]

I have the same cable come along with the same bent handle. It has served me well for 40 years.

[@keitht7546]

Glad to see you and Mr. Spotty come to an agreement and he’s back on the job lol. I hope after fixed it don’t go jumping again. Great video ✌🏽

[@vehcor]

His attitude is a little better. I guess he doesn’t want to go back in the box! 😂

[@michaelhuey4187]

Mr SPOTTY‼️ Welcome back to the Denali channel❗️ That pizza delivery person deserves a BIG tip😊 Keep up the good work, Scott👍

[@vehcor]

Tip? She forgot the pizza! 😂

[@chrisgormally4988]

I can really appreciate the work you put into your builds. Some guys on here do them half assed then re sell. You don't. I appreciate that immensely. I myself wouldn't do these half assed. My view is 100% or nothing. Great job and great videos. Subscribed.

[@alicharlie8146]

Love this guy sense of humor skin and bones heal paint doesn't

[@stephendee7839]

The suspension is specifically designed to be strong enough to hold the wheel on when the vehicle isn't crashing and weak enough to fly off when it is crashing. This enables the vehicles to pass crash testing because the wheel doesn't get leveraged into the passenger compartment.

[@watsisbuttndo829]

How could you not want to work in the test cell that confirms that this is the case.

[@vehcor]

Yes, I have said that multiple times before.

[@watsisbuttndo829]

@@vehcor "test 346, fail, chuck it on the pile!".

[@richmelillo9637]

MR Spotty-Welcome back from your trip! Glad to see the progress there today, Thanks for sharing! Always fun stuff! Rich

[@CarsSimplified]

It's great to have all the stuff you need to move a big awkward piece like a truck bed like that. Good stuff!

[@davemcdowell4563]

SCOTT I SURE ENJOY YOUR VIDEOS THANKS AND GOD BLESS

[@leepaulison4928]

I always find it interesting that your work is always far better than manufacturers spec.

[@johndrumm4270]

I look forward to your videos every week. I find myself going back and rewatching previous videos. Great job.

[@josmotherman591]

Excellent rebuild and video. One thing I learn is how cheap all of the new trim has gotten, and how cheaply they attach it. No more "Good old days".. Thanks for the lessons

[@sudd2685]

I’m ready to take delivery, as always thank you for your videos really enjoy watching.

[@johnpartridge7623]

I like your attitude & work ethic mate, just proves you don't need the latest upto date mega pricey Snap-Up/Smac Tools.

[@michaelbruns473]

Coool, Mr. Spotty is back!

[@vehcor]

Now with a slightly better attitude! 😂

[@floydhelms44]

Thanks for sharing your video. I'm a Chevy man too.

[@notsoserious0944]

Man I love vehicles that don't use hood prop rods. I love relaxing to the lyrical sound of Scott's Chicago-style commentary on Fridays after work.

[@johnmccallum9542]

Thumbs up for MR SPOTTY ,,, Yay !

[@vehcor]

👍🏻😀

[@dna59]

I appreciate how detailed your videos are. Great tutorials!

[@NotOnYourLife]

Great work as usual Scott.

[@jgl255]

Ah the Chicago jokes are pure gold.

[@vehcor]

Chicago itself has become a joke. 😂😳

[@royportalise5269]

Hi Scott. Glad to see Mr. Spotty is back in action. Was he doing time or was he on the lamb?

[@vehcor]

He has shipped out with the seatbelt last time.

[@joetrippi1603]

Appairenty they didn’t want him either…

[@prayformojo1117]

Thanks for your videos. I've been using them as a guide while I refresh my 125k mile 2007 LBZ Sierra. Who knows, if I'm successful maybe I'll take a crack at a smashed newer one later.

[@evtoilnj]

Thank God Tape Guy is back

[@richardtaylor2449]

Thanks Vehcor and GO gnomes 💪👍👍

[@MrClarkisgod]

Great video as always Scott.

[@keithhill9138]

I love your dry sense of humor!!!

[@kevinAuman1]

Lovely, my denali windshield is shot too and judging by the amount of labor you put into pulling this'n leads me to believe it won't be an inexpensive ordeal... 🤦‍♂️

[@raydaggers5773]

Great to see you're back. Happy Friday!

[@vehcor]

Thanks, Happy Friday!

[@stumpy2816]

Love watching you work. You make it loo so simple. 👍👍

[@BrucePierson]

That's a neat bed lifting device you have there. No doubt you made it to make it easy to remove the beds from the many trucks that you've repaired over the years. Sure beats trying to use ratchet straps. Hope to see you next week, you were missing last week!! All the best from Queensland Australia, where it's still winter ..... hopefully not for much longer.

[@vehcor]

Ha, winter, you mean rainy season? That bed lift is 20 years old, it used to be quicker just to grab 4 guys but I have gotten older and wiser. 😂

[@BrucePierson]

@@vehcor Actually, winter is the dry season here in Queensland, as we get most of our rain in summer. That is unless we aren't in one of the droughts that we've had for the last 20 years. With lifting things with people, one time six of us carried a car body up a hill and put it on a trailer. It was the only way we could get it out.

[@danaschoen432]

Glad to see Spotty back in action

[@scarface-39]

I came here to watch the master and for the relentless sarcasm, I my friend was not disappointed 👍🇺🇸

[@FlyEaglesFly19111]

Hey look who decided to entertain us this week. Man you must be taking your time rebuilding.. oh wait..your on the road for future builds. Anyway its popcorn time and sit back to watch. Have a great weekend. Stay safe and be well.

[@vehcor]

Actually I’m just getting work done. I forgot how much I can get done when I am not making videos.

[@FlyEaglesFly19111]

I hear ya. But I for one DOo enjoy your content. I look forward to coming home and seeing the videos. The humor is second to none cause I deeply understand where it derives from. Stay safe and be well Scott.

[@marcosmaisterra4477]

Your pizza delivery girl is the most beautiful pizza delivery girl I ever seen. And she's helpful as well.

[@johnds6621]

thank you for the Video I missed not seeing one last week. Sorry I'm retired and it's to hot to do anything so....

[@NoName-tz5ji]

The more I see of how and what is put together on these new things they call trucks the more I love my 24 yo with a quarter million miles.

[@andrewwilliams8365]

man you're lucky. When i went to pull the bed on my 07 I had to cut a hole in the floor of the bed & use vise grips because one of the threaded nut on the back side broke loose and spun with the bolt. Good thing for me the bed was trash & i had a flat bed waiting to go on.

[@ItsKibet]

Gotta get my Vehcor and Mr spotty fix!

[@fogguy2530]

Nice Show..

[@davidp2888]

Nice to see Mr. Spotty again.

[@lear60man]

Glad to see you back....I thought you got cancelled over that 'thing'.

[@vehcor]

I wish I would get cancelled. It’s not like I’m not trying! 😂

[@chrislongbeard]

I'd spell out Denial HD just to mess with people.

[@vehcor]

I’m not done yet, I just might.... and not on purpose. 😂

[@NathansMoparGarage]

I was thinking the same thing as he was taking the letters off.

[@garthbutton699]

See ya!thanks for the vid🤗😎🤗😎

[@vehcor]

Thanks for watching!

[@WatchWesWork]

My multipurpose tool looks more like a 2x4.

[@vehcor]

I can't afford fancy tools like that with the price of lumber these days. lol

[@billbowers268]

That pizza girl is a life saver.

[@vehcor]

As long as you aren’t counting on a pizza! 😂

[@kurtisblow3650]

That wiper removal tool is by far the most valuable tool in the shop.

[@hackfabrication139]

For a minute, I thought that was a Mr. Spotty coozy. I'll have to check your store, because I want one!

[@laffilmfest3759]

Like watching a surgeon do his thing :)

[@bigblocklawyer]

Forklift with a pallet on the forks is the best welding table ever made.

[@trbstang]

Good to see that Mr. Spotty is back again! I kinda think of him as being like Mr. Bill, but he needs more facial expressions. Great job Scott!

[@seanlever9361]

I'm here in Ontario and I could not imagine working on a vehicle that isn't all rusted out... I'd probably have a stroke! I have a 03 Silverado 2500hd, Duramax.

[@Cartier_specialist]

And my Friday afternoon is complete.

[@vehcor]

👍🏻

[@markb.1259]

Great work Scott! Thank you!

[@adubbelde1]

On my 15 Denali, on a windy day, I'll get wind noise from the top front corner of the door frame. Should I try to put a little pressure on that corner of the door?

[@vehcor]

Might not hurt, they move pretty easy. If someone has ever locked the keys in it and wedged the door to get the lock out tools in, that is all it would take to cause a wind noise. That happens more than you want to know at the dealer. 😂

[@futhermuckerson]

7:56 climbing down like Antonio Banderas in Expendables 3

[@trevorjarvis3050]

👍

[@houseofno]

Next on "Unsolved Mysteries" - "What, no haters' tears?"

[@karlgoebeler1500]

Watching you work Remaking a 95 Toyota Camry you got me thinking Airbags On a 26 year old car HMMMMM New injectors 28 Miles a gallon Street 237 thousand miles Still running Thank you

[@vehcor]

You can’t kill a Camry!

[@joesavage6084]

Scott i enjoy all of your videos but what happened to the black mustang convertible i cant remember the year

[@Guillotines_For_Globalists]

I think that windshield camera requires special relearning with GM computer. Is that True? My 2019 Yukon had a windshield resealed and then the automatic wiper sensor wasn't working (separate sensor than the emergency braking camera.) GM replaced it under warranty, luckily.

[@nanianmichaels]

With the amount of Denalis you repair, you'd think you wouldn't really need to make new letter guides anymore :P

[@vehcor]

I always have one to measure off of. 😂

[@abelgomez1601]

Nice that you have a lot of work and you still give yourself time for your followers

[@vehcor]

Thanks, I try.

[@stephenflint1303]

I’ve takin out my carpet liner out so many times I don’t even put them all back anymore just to save me time of taking my carpet out

[@bearing_aficionado]

Lawd geezus that's some overkill with the carpeted wheel well screws.

[@vehcor]

Right? 😂

[@johndrumm4270]

Oh and for the comment from the person about you being gone for two weeks. Your videos are worth the wait. Forget them hatters. 🤙🏻

[@mandymoo7406]

what the mad hatters with the 2/6 hat 😂

[@johndrumm4270]

@@mandymoo7406 I meant haters. Dam fat fingers. Lol

[@lloydhoster1490]

So your amzon store is the Cornwell tool box that has everything😛

[@enriqueoctaviosegurahernan1619]

Saludos desde San Nicolás de los garza nuevo León México

[@clearingbaffles]

It looks like you’ve gone Milwaukee I have lots of DeWalt but I found and adapter to run them on Milwaukee batteries and I buy Milwaukee kits at big box and pawn stores as I’m switching over to Milwaukee tools impacts are impressive great for breaking lug nuts loose and snugging them before my enhanced “click”

[@carguy4658]

I love these trucks.

[@vehcor]

Me too!

[@baderalhamed6724]

@Vehcor !!! As always, thanks for your efforts for a Quality video & salute to you for professional work! SPECIAL REQUEST PLEASE, I am a GM person and into truck stuff. Would you consider working in the older models (2007 - 2014 body style HD’s) whether the 6.0 or 6.6 engines? If you would, I do have an idea that you may use as content (which I think a ton of viewers would appreciate). Try to bring yourself a decent 6.0 truck that uses the stock factory clutch/mechanical radiator cooling fans and replace with the OEM dual efans that are used in 1500 platforms trucks & SUV’s. Here’s the catch though that will make you shine even more among other KZbinrs which no one ever did or have documented it as far as I know. Also all of them are rookies with all respect to them; you will install everything from hardware, wiring and programming exactly as GM have done them on their 1500 platforms for NNBS or GMT900 trucks/SUV’s. Tip: GM were kind enough to include the three electric fan relays in the fuse block under the hood on the HD trucks although they are not being used. You may easily wire them same as factory, the fuse block circuit board is already physically set or accommodated (you’ll know what I mean). Only thing left is purchasing the original harness from a junkyard then steal just the wires you need and connect them accordingly. PS: I have succeeded in doing this project by myself recently but only after a (2 year research), that’s how crazy I am with GM products and insisted in doing it the factory way. So in summary, if you need any information regarding this from specific diagrams to type of connectors needed. You name it, I would have the pleasure in chiming in all the way to make everything going smooth for you and having your own UNIQUE CONTENT that I reckon lots of folks will appreciate you for! Sorry for the long essay, but please consider… Best of luck buddy ✌🏽😉

[@vehcor]

I actually skipped that generation of truck because they were ugly (in my opinion). They didn’t have the same resale, so rebuilding them never made much sense. Who knows though, if a buy comes along I may end up doing one.

[@jdretiree2433]

Your attention to detail is why no one should ever worry about buying a vehicle from Vehcor.

[@alexandermckay8594]

I'm not sure you noticed but your bed support needs a little welding on the one leg right near the wheel.

[@TripodsGarage]

The land of rust and corruptions is 100% correct.. LOL

[@vehcor]

Yep, all our governors seem to end up in prison. 😂

[@TripodsGarage]

@@vehcor - This one should as well! Back in 2008 Rod Blagojevich and JP Pritzger were wire tapped. JB was seeking the state treasurer position. Now we are under lockdowns again 😡

[@ronniecardy]

Nice to see the pizza 🍕 lady again. Sure miss seeing her in the shop 😢 where do the sunroofs drain to? I see so many new trucks with them.

[@chrischambers4513]

Nice work, hope you have a great weekend.

[@vehcor]

Thanks, you too!

[@andrewbarnett4621]

Mr. Spotty need to be place in the army for attitude adjustment. 🤣🤣😂😂

[@davidruffjr6045]

Nice video sir 👍🏻👍🏻

[@vehcor]

Thanks!

[@mandymoo7406]

ha ha i see mr spottys here to keep you in line

[@MixedupMatt1]

I need me one of those mobile gym/ truck bed picker upper/ welding tables

[@HP.Customs]

Land of corruption and rust, hahahaha. Talking about that where’s your mask since you’re inside. Good ole Pritzker huh.

[@vehcor]

Old video, I now wear a hazmat suit everywhere! 😂

[@HKRXPRS]

Thanks for the video. It made the perfect bedtime story to get my 2yo daughter off to sleep.

[@DaddytechEnt]

*So what, is the "afternoon crew" burning up your bank account in college now? LOVE the multi-use tools, there should be thousands of them lol*

[@membersolny]

California,we might have all the Fruits`n Nuts,but no RUST!

[@vehcor]

I might take rust over Cali and I hate rust! 😂😳

[@mrjoel59]

I appreciate the quality of your builds. I do have a question on how you can have insurance and plates on these vehicles while you have these in your possession?

[@jamesterrill1938]

Another great video, Thanks..

[@keithjackson1180]

I am surprised that you don't have a magnetic template for the Denali badges.

[@jeolsaudi1088]

Waiting for Part 3 👍

[@Therealrichdude]

"Skin and bones heal, paint doesn't" HAHAHAHA