You are the best mechanic on KZbin and I have seen vid's from all the famous American KZbin mechanics and they come no where close to explaining repairs the way you do. You explain things in detail and even though I don't have car issues (my Yaris is bulletproof lol ) I still find your content interesting.
@vehiclemaintenanceandrepai37903 жыл бұрын
Thank you, Lucan, I feel the need to get the message across and not do the videos for fame but to genuinely help others.
@vehiclemaintenanceandrepai37909 ай бұрын
Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you. Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA, It is FREE.
@bonganisamuel5743 жыл бұрын
I am always impressed with your work
@vehiclemaintenanceandrepai37903 жыл бұрын
Thanks for the support Bongani, it is always great to know one's efforts are appreciated, a lot of time and effort goes into making these videos, I do it to help others better understand cars. Gary
@saro92dme6 ай бұрын
The best mechanic out there!!!! Very useful mate. .
@vehiclemaintenanceandrepai37906 ай бұрын
Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you. Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA, It is FREE.
@giftpheko41192 жыл бұрын
Thanks for the lovely and informative video.
@liammcrobert517910 ай бұрын
Fantastic video! Keep them coming!
@vehiclemaintenanceandrepai379010 ай бұрын
Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you. Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA, It is FREE.
@MutturajMathraj3 жыл бұрын
Very nice and excellent explained.. Thank yu you
@nutlange69103 жыл бұрын
Anothe great video and one that`s going into my Automotive folder here on KZbin. Thx Gary :)
@vehiclemaintenanceandrepai37903 жыл бұрын
Thanks, Nico, it is great to see appreciation for one's work. Gary
@nutlange69103 жыл бұрын
@@vehiclemaintenanceandrepai3790 You just keep those videos coming my friend, I`m learning a lot by watching them :)
@patricksbonner19803 жыл бұрын
Good video. Good knowledge.
@vehiclemaintenanceandrepai37903 жыл бұрын
Thanks for the support, great to see one's work appreciated. Gary
@FragrantVagrant693 жыл бұрын
Very helpful video, thank you.
@vehiclemaintenanceandrepai37903 жыл бұрын
Thanks for the support Graeme, I am happy you found value in the videos. Gary
@dennishartwig12683 жыл бұрын
great video!
@vehiclemaintenanceandrepai37903 жыл бұрын
Thanks for your support Dennis, it makes me proud to know you found value in my video.
@alistairdube24006 ай бұрын
dankie meneer❤
@vehiclemaintenanceandrepai37906 ай бұрын
N' Groot Plesier. Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you. Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA, It is FREE.
@SeanBZA3 жыл бұрын
yes the press is a good thing, but you can make do with a bit of ingenuity and a giant size C clamp as well, though the removal part was done with the aid of a few sacrificial bricks, some wooden planks and a BFH to provide the gentle persuasion for the bearings to part company. The name of my hammer that I use is "Gentle Persuasion", because if that is not moving it the next steps involve an angle grinder and a gas torch.
@vehiclemaintenanceandrepai37903 жыл бұрын
Hey Sean, it is amazing how ingenuity takes over when one is confronted with obstacles such as replacing wheel bearings, a bench vice is useful too, and I once removed and fitted wheel bearings by freezing it overnight just to experiment, my hammer's name is "THE MOERING TOOL" (off-camera only hahaha....), thanks once again for your interesting insights it is well appreciated. Gary
@leandaclaassen43362 ай бұрын
Hi there, since my husband changed my wheel bearing , the engine light comes on and car goes into limp mode, do you have any advice?
@McaaAhmem4 ай бұрын
عاش يا بطل ربنا يعطيك الصحه
@vehiclemaintenanceandrepai37904 ай бұрын
Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you. Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA, It is FREE.
@stanfordneutt675610 ай бұрын
What is the torque figures for tightening the size 32 nut on the drive shaft?
@vehiclemaintenanceandrepai379010 ай бұрын
255 nm Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you. Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA, It is FREE.
@eldridgemoses75963 жыл бұрын
Brilliant. Thanks for this, Gary! What is the part number of the wheel bearing? Masterparts says they only have a listing up to 2012 for the Ford Figo. Also, is the circlip in the kit used at all?
@etienneoliver2963 жыл бұрын
Hi, is the rear wheel bearings on the ford figo also abs bearings and does it need to be pressed in aswell
@vehiclemaintenanceandrepai37903 жыл бұрын
Yes, Etienne, they are ABS too and yes it is best to use a press.
@kreesenrayappan8403 жыл бұрын
Another awesome video 👌. I have a 06 yards t3, the car has been losing oil due to a rear main seal leak, the Leak doesn't seem to be severe in a case where there is drops on the ground but if you look at the bell housing you will see an oil damp. I have a judder on my clutch which was put in 2018. Do you think it's necessary to replace just the seal or install a new clutch as well?
@vehiclemaintenanceandrepai37903 жыл бұрын
Hi Kreesen, firstly thanks a tonne for your support, if it were my vehicle, I would do the seal and clutch at the same time as the clutch was done back in 2018 and a leak on the rear main seal will affect the clutch assembly as by now oil has leaked onto the clutch plate. Wishing you all the best with your decision. Gary
@kreesenrayappan8403 жыл бұрын
Thank you Gary. As per your recommendation I will do the seal and clutch. Thanks again for the awesome content. I will be watching your recent uploaded video tonight:) cheers!
@vksekn3 жыл бұрын
What is the size of the bearing
@franklindebruin20743 жыл бұрын
How much would it cost for the Labour to replace 1 wheel bearing. Thank you sir
@vehiclemaintenanceandrepai37903 жыл бұрын
Around R650 for a front bearing on a Ford Figo Franklin, that includes removing and refitting the hub.