Very Relaxed Engine build l Satisfying l Mechanic l Art l Subi-Performance

[@SubiPerformance]

cam lock tool : www.subi-performance.com/product-page/camshaft-lock-tool

[@seattleblack8988]

What are you adding to the cylinder up top ? Is it QuickSeat / some other ring break-in chemical ? Awesome channel BTW 👍

[@rosangelagomes4758]

Geraldo.oliveiradasiva

[@АлександрГанжа-с1ф]

Ллх

[@ebrahimzarour374]

مخ

[@แดงเปรมปรี]

@@seattleblack8988 4

[@danieldonoso5371]

No music, no comments, no interruptions, pure work, the place was beauty... Thank for share.

[@Mechanic21]

Good jobs i like from Ethiopia 🇪🇹🇪🇹🇪🇹

[@HondaWagovan]

Dang, that work space is so organized and clean. That engine so spotless. Love the videos you put out, makes working on PCs at work go by quicker.

[@KLNYC]

That torque sequence is crazy.

[@yjmsrv]

Yeah I wondered about that too then looked it up: 1. Apply a coat of engine oil to washers and bolt threads (or his ARP Torque Lube) 2. Tighten all bolts to 29N*m (22ft-lb) in alphabetical sequence. Then tighten all bolts to 69N*m (51ft-lb) in alphabetical sequence. 3. Back off all bolts by 180deg first; back them off by 180deg again. 4. Tighten the bolts (A) and (B) to 34 N*m (25ft-lb).

[@rowentan]

Very detailed and systematic. I loved the way he torqued the bolts down with several steps and how he checks the gaps with feeler gauge. Very seldom do I see such good job even at the dealerships or performance workshop in our country. Great job Subi Performance!

[@nikrous5996]

During your brilliant work you were speechless and at the end you left us spechless too. Uncombarably superprofessional done

[@diabolicaholic]

He just keep it clear the sounds so we can classify it as ASMR :DD

[@TC-mw3cs]

These attention to details matter so much . This is how it is done right.

[@trentulloa]

Not clean enough

[@aigeantech]

Τhis man is a guru !!!!!!!!!!!!!!!!!! No one goes to the demonstration to tie an engine with such a detailed !!!!!!!!!!!!!!!!! Greetings from GREECE.

[@aigeantech]

@@hantimau yep!!!!!!!!!!

[@ziggyfreud5357]

Just love this. Watching this is so therapeutic. I hope you feel the same as you do the build. Cheers :)

[@TC-mw3cs]

Measured cups , opposed to measured shims ? , This is another level.

[@MrJohannVegas]

Taking a break from my EJ25 build (in a much colder/less well equipped garage) to watch you rebuild. Outstanding as always!

[@sanvideoprofsan]

тот случай когда щепетильно собрал свою субу .. надавил и опять в гараж удовлетворяться ;)

[@troyanddarshie]

I could sit here for hours watching this

[@indims2367]

Ставлю лайк👍Как же всё круто, чисто окуратно!

[@napractike4769]

Тоже сразу на этом акцентировал.. мастерская, офис.. офигенно конечно.. особенно когда сравниваешь со своими условиями)

[@hermanman8235]

This is the proper way to build/restore/refit the engine components.no hurry and the sense of urgency just a relax calm attention to all details.

[@jah2mon]

You must be one of the top builders in the world

[@isaakneufeld1323]

Excelente trabajo un ambiente muy limpio con toda clase de herramientas

[@grahamhawthorn7205]

This guy is not a mechanic, he is an engine surgeon.

[@enedenedubedene4811]

Der versteht sein Handwerk. Und alles ohne Handschuhe. Alle Achtung. Viele Grüße aus Germany.👍👍👍👍😀😀😀😀

[@lisandroleandro5924]

O cara é bom olha o capricho da sua oficina mais limpa que um restaurante kkk top👏👏💪💯profissional

[@ruikazane5123]

Good things in life take time. So as a life of every engine built on Subi Performance. Long live the boxer!

[@incogn3gr0]

This is absolutely beautiful work.

[@Adam151082]

That's a man who knows his trade 👌🏼

[@Isaiah5417GdLk]

Loved cars all my life, by far these are my favorite little engines.

[@TheMannynmr]

His garage is well organized good job keep up the good work

[@Scuba_Bro]

It’s nice to see an engine get the calm, and relaxed TLC it deserves!

[@eze8024]

I was a little impressed by how organized his work area is. Then saw his toolbox of various buckets :O

[@infinitypower5835]

На таком сервисе работа мечта все окуратно и чисто

[@МаксимЛисаев]

Было не заснул, пока смотрел, хожу теперь в очаровании, Зеваю...

[@TC-mw3cs]

Challenge , take a drink every time the torque wrench clicks.

[@mithunmandal598]

Dada in bro thanks 🤝 very nice video 🤝🌹

[@casualrager3817]

this is so relaxing asmr metal and bolts clanking around its so relaxing im not even kidding i enjoyed this so much

[@ГригорийМелихов-в3е]

Мужик!!!!! Не то что дилетанты в автомастерских! Всё до сотки миллиметра продумано до каждого Ньютона!

[@Antonio-pd7tn]

Когда постоянно делаешь одинаковую работу , всё доходит до автоматизма . Ничего сверхъестественно в видео нет . За чистоту и аккуратность +

[@Remont61-ru]

@@Antonio-pd7tn более того, мне интересно, почему он сальники распредвалов сразу не поставил и ге обтянул крышками?

[@IndianTruckWorkshop]

Perfect work 👍

[@MrChoopaalex]

New ASMR Category - Subaru Engine Assembly!

[@vilmarhenrique8125]

Llllllllĺlllllllllllll

[@mortimersnerdishere]

Good to see someone as meticulous as I am building Subarus

[@robertrishel3685]

First class attention to detail👍🤯

[@wilmandimenza5346]

Hola sobresaliente con mencion. Inpecable no es necesario ni palabras ni ruidos de loca musica- Las acciones hablaron mas que mil palabras . Bendiciones que le sorprendan. Willy desde el URUGUAY

[@сергейрусский-ш4ш]

Стерильная чистота в ремзоне ,как операционной !

[@ВиталийКамышов]

Сразу видно ,что человек любит технику, как аккуратно собирает!

[@steverogers4891]

Thank you Andi, showing the Tomei cams install, fantastic work. 🤘🤘

[@mrworldetika5521]

Nothing more satisfy than that tourqe Spec sound

[@BRI33NOR]

With such careful and precise hands and such attention to detail could have been a midwife !. Enjoy your videos.

[@madhanakumar6155]

A job known person needs lot of patience to watch this mechanics work. Finally has he started the engine or not.

[@R1200GSvlogs]

wieder einmal eine sehr feine und saubere Arbeit. Danke fürs mitnehmen. Bisschen zu wenig Dachshunde aber naja, dafür hat der Sílikon-Dieter an den Dichtflächen nicht zugeschlagen ;)

[@Godknown]

I would love to have the pleasure of working in my own shop, with all necessary and top notch tools, on vehicles of all kinds... improving them all day. It would be like Iron Man's mansion. Having all that space to myself just to think and do good deeds on cars all day.

[@raycalderon6564]

You are the man !!! I love your shop how clean it's

[@BrainStirmKZ]

@13:00 In the background, next to the table is the most important tool in every shop ever! :D Great video, thanks!

[@Imagineering100]

I was told its a Fine alighnment toll .

[@TheDanno81]

I dont know how anyone could build an engine in such dirty, filthy conditions and have it run...lol Great video, thanks !

[@StrikerFin]

It will run as long as the dirt don’t get inside it. Even if it does get inside it will still run.

[@TheDanno81]

@@StrikerFin I doubt there's even a speck of dust in that shop. You could eat off of any surface in there. I wish my place was that clean.

[@WifeBTR123]

My 2006 WRX lasted 325,000 miles before camshaft started knocking. Still on the original clutch. I'm saving up for a new engine. Probably put a clutch in when I replace engine. Definitely would like to have my engine built her but alas I am in the US. :) Thanks for the great video

[@michielvanderwijk]

Dit is echt een top expert alles tot in de puntjes zo precies ik hou daar van. En zijn hond vind ik ook zo mooi

[@javiflores5896]

Bruh, this shop is so clean! Id take my car here anyday if I could, best of the best pros. Keep it up!

[@cyanur6791]

Sympa la petite 106 rallye 👍

[@jakebraaaps2149]

*trying to watch relaxing engine build* *getting sleepy* *ad comes on* “OH OH OH OOOORILEYY!!!”

[@alexandersmith4324]

Lolol

[@arbys8878]

KZbin premium brother never even heard of this "ad" you speak of

[@axelstrehl4935]

Sehr akkurat! Feine Werkstatt!

[@madinadiesellab]

Good work 👍

[@amir-khanengineer]

Nice shop

[@fixitup686]

106 rallye in the background 👌👍🏻

[@honvun8002]

Your video taking n movement makes my head spinning n giddy …..

[@ukaszpanek4058]

I can see the Passion. If there is a passion there is life warranty for product. Keep going. I would like to be like You 😁

[@brigittehaider4401]

Die gute alte Zeit,da war Motorenbau noch einfach.Aber interessantes Video ,weiter so.

[@Rinop321]

Like a doctor working on a patient!

[@igormelo5318]

Man we need more content like that in KZbin

[@rosangelagomes4758]

Geraldo.olieveiradasiva

[@anthonymorolli2519]

i love how he just has like 3 drawers full of lifter buckets

[@brunosantana2845]

I followed your work from here in Brazil. Congratulations for the videos, they are the best

[@whothe_f7057]

WOW nice 4g63 build

[@Joe0779]

4G63 = Mitsubishi

[@xy5408]

Wow, noch vor ein paar Wochen hattest du ca 2000 Abbonenten, jetzt sind es fast 30000. Gratulation dafür. Wünsche dir weiterhin so einen riesen Sprung und alles Gute.

[@rasimrasim5715]

Der macht ne Show alter Schwede

[@Alfran-yh4oo]

Really nice work, and the workshop looks like a medical center, congratulations!

[@cedi98]

it is a medical center ;) for boxer engines :D

[@checkengine2319]

Без слов!!! Кто знает тот поймет. Супер.!!!

[@etusch]

Great job as you do everytime

[@Ampex196]

My only Subaru was a Legacy with an EJ22 engine. It enjoyed driving it. It was a big car that handled more like a supermini. It gave very little trouble. The water pump bearing collasped at some 100K miles but it did not throw the belt.

[@mamz1404]

اللهم صل وسلم وبارك على عبدك ورسولك محمدﷺ

[@33ad1]

الحمد لله على نعمه مخلصنا يسوع المسيح . حمل خطايا العالم على الصليب كي نخلص انا وانت وتكون لنا الحياة الابدية .

[@qwwesaz]

Отличный мастер! Идеальный порядок и чистота в помещении подтверждают, высокую квалификацию мастера. .

[@ChickenMusiala]

I don't like ASMR but damn this is super good

[@sebastiannbr]

📁Documents 📂Videos 📂Subi-Performance 📂Bad Videos ⚠️ Category empty

[@steveabcdef7165]

The engine was already built, is that why it's satisfying?

[@GeDoBa]

I remember that in the USA the Subaru Boxer from Fuji Heavy Industries were often used in Prop.Aeroplanes. The best boxer type with a minimum of vibrations are the 6 cylinder type as they were build in the Subaru Outback H6 (similar to the Porsche 911 Engine!)

[@olegizmaylovo6554]

В следующий раз хочу видеть очень напрягающую сборку мотора!!С кувалдой,зубилом и гайки чтоб пассатижами закручивал! Жду!

[@SignumHero]

Impact Fein 👍

[@mehack7417]

very good mechanics he puts many oil to the lining engine

[@danielmartz3145]

This video makes me want to rebuild my engine for the fun of it.

[@Xaverl58]

Hallo Very good Videos without „Laber,Laber“ and stupid Musik You bring it to an end by very concentrated and clean working on a very high Level as it should be for a good mechanic Go on working like this I do this for over 40 years in the same way It‘s nice to see good young guys for the future MB

[@derf9465]

I always lube everything that moves on a rebuild, otherwise it's dry for the initial start and run, no oil on the valve gear or bore., yeah it smokes, better than, dry parts wrecking ring edges and cams, followers.

[@acvn-hg9gy]

I do that too. It starteld me when there came so much smoke out of my exhaust on the first start haha.

[@ahmarrajput7288]

Very nice job

[@ngontraktor9990]

Very clean workshop

[@nordyk2]

Ty mówić po polsku ? Zajebista robota 🔥🔥🔥🐥🐣🥚 eine sehr gute und saubere Arbeit. Klasse oder Porno kann Mann auch sagen.

[@annabobanaasmr8411]

Ughhh it's soo satisfying

[@chrisburnsed6349]

This is how I build engines . Clean environment, and take the proper time. It takes far longer to have to redo something because of not being patient. If I have a customer who is in a rush I turn them away. Period. I will not build any engine under time constraints. My reputation on quality is far too important to me.

[@sinchrotron]

Completely agree with you. Building toys is far away from building commercial engines. Rush is unacceptable :)

[@aqib2000]

Very good attention setting the fine tolerance using the feeler gauge on the camshaft. Show that in a even more detailed video...

[@mariomoreno9954]

can you tell us why and what kind of grease do you use for the cilinders before mounting the pistons? First lubrication is the another critical thing to ensure the long life of engine. Thanks for the detail awesome work!

[@johnnyo3fan]

Haven't seen valve adjustment like that since my XJ6.

[@ВасильВішко-т2ш]

Ого кашкетники вже мотори крутять!!!

[@edsongsxfsilva7509]

Excelente vídeo, parabéns!!!

[@kevinb9407]

If only I could have done this is when I worked in a remanufacturing plant: I always said under my breath that "I hope they reserve a special place in hell for whomever invented the timeclock".

[@deparpejpetodile6566]

artiste 👍

[@yamahattr6006]

Subaru surgery the patient will be fine nice job

[@asdasd-ws8zq]

Я помню на практику ходил к мотористам, они перебирали движки от грузовиков. Зарплата 20 тысяч))

[@Ε.ΣΥ.ΕΛΛΗΝΩΝΣΥΝΕΛΕΥΣΙΣΑΣΠΡΟΠΥΡ]

YOU SHOULD CLOSE THE HOLES FOR THE SPARK PLUGS JUST IN CASE