How to Install an Air Horn on a Vespa GTS

How to install the Stebel Flosser Nautilus Air Horn on a Vespa GTS. PART# HORN-STEBELNAUT
VESPA MOTORSPORT
3955 Pacific Hwy.
San Diego, CA 92110
For the largest selection of parts and accessories in North America, please visit our website:
WWW.SCOOTERWEST.COM
Thanks for viewing!

[@1PaulG1]

Ok ... I bought the horn and horn wire kits or my GTS 300. Followed the fantastic instructions in this vid, I didn't break anything and it's works great And its friggin loud Hahaha Thanks Scooterwest :)

[@davebarrett1872]

Absolutely an excellent video guy's......Nice for a change to see mech's who know what they are doing and show folks the "right" way ! Very well done and much appeciated. Dave Vancouver BC Canada

[@markwalters1584]

I like you guys. I'm saving money now for my GTS 300. Then I will catch a bus from Texas to San Diego and I will buy my scooter from you guys. I enjoy your videos so much I figure I'll give you the sale.

[@VespaMotorsport]

Yes, this will work on the GTV.

[@oldshakyhands]

Lesson learned, read the comments first, after some jiggery-pokery, I've managed to squeeze it in. GTS 300 2018 with ABS pump and Tracker device. Relocation of Tracker, re-used the modified turn signal mount, now located on the top captive nut at an angle. Slight modification to the inside of the glovebox to allow room for the compressor. Never say never. It fits. 😁

[@billywhizz8957]

Great video guys, just used this to fit horn on a 2018 with ABS, I had to move the bracket so that the bottom hole located on the top bolt only but it still fitted just.

[@VespaMotorsport]

It will fit, you just have to find the room for it. It should fit behind the legshield. Once you remove the glovebox you'll be able to get a better idea of where it can be fit.

[@bufallobiff]

My '06 GTS 250 had the flasher located in a different area hence no bracket. I fashioned my own bracket and managed to stuff it in the same general area and buttoned it back up. I've had that horn for a few years and finally found a good use for it. It's pretty loud......

[@davidbeska]

Dear friends, I installed Stebel Airhorn on my GTS300 a few months ago. One recommendation from my side. If you will separate airhorn into two parts (compressor and trumpet) then instalation become much much easier .-))

[@VespaMotorsport]

It will fit much the same as an LX, you just have to find the room for it. It should fit behind the legshield. Once you remove the glovebox you'll be able to get a better idea of where it can be fit.

[@victordipersia]

Hey Robot, I know you drive a BV350 yet you don't make too many videos about it, would you make 1 video about replacing both the HORN and installing the MI107...? I just bought this from you and tried to remove the front plastic unsuccessfully :-( Your videos are excellent, thank you for sharing your knowledge ! ! !

[@Leoholmes]

Hi, Hopefully not a stupid question, but is the "SPEAKER/SOUND" of the horn facing into the body? instead of outwards through some vent??

[@niemand3790]

Does it fit inside a vespa sprint?

[@michelrota1973]

ottima spiegazione

[@ronburhans5788]

Will this air horn fit my 2022 vespa gts 300 touring ?

[@alhamelio]

Awesome ! Does it fits the GTV300 ??

[@brenbrady]

Would this fit a GTV?

[@logs]

And just wondering... do they even have a Zip 2000 in the USA?

[@jimbo1326]

Can it be installed on a 2001 ET4? Thanks

[@ArmaanAhmed1502]

Awesome!!

[@sergantxl]

Will it works on my gts 125 2020 Model ?

[@paulfarmerful]

I have a 2016 GTS 300 ABS model and I've had a peek inside where the Stebel is supposed to go. The ABS unit would make it a very difficult fit, and if you have the Vespa -LUX alarm system fitted there's no room at all.

[@stephaniemccully3867]

modernvespa.com/forum/topic161979

[@aaronkemp18]

Hi there. Will this work on a 1980 vespa px 150 e?

[@logs]

Is this also possible with a Zip 2000? (It's also from Piaggio)

[@kkandretti]

can one of these Horns be installed on a Yamaha 125 zuma..??

[@anderswallgren3109]

Can you give us an install video for the GTS 300 ABS/ASR Please!

[@viroski]

Does this air horn fit on the new model gts? is the abs in the way??

[@stephaniemccully3867]

modernvespa.com/forum/topic161979

[@thephotomatic]

It seems it wont´t fit on the 2017 GTS version 'cause the ABS is located wright there... any alternative?

[@stephaniemccully3867]

modernvespa.com/forum/topic161979

[@rickhill6475]

dos it fit on the 2005-2006 vespa GTS250ie ?

[@bufallobiff]

I've just installed one on my '06. The flasher is located in a different place than their video shows and there is no bracket. You'll have to create your own bracket

[@markrhinehart1]

will fit o n2012 yamaha zuma scooter stebel nautilus loud air horn what is model and part number please let me know

[@VespaMotorsport]

As long as you have a 12V power source and a place to fit it, this horn is pretty much universal. The part number on the Scooterwest website is "HORN-STEBELNAUT" www.scooterwest.com/items/?_pageCCS=t#page=/item_details/Nautilus-Air-Horn-by-Stebel-/1690

[@DamiRadic6]

In the future, when you take something off the scooter, don't throw it away, but when more parts accumulate for one box, send it to me, I will use it well! With such a gesture, you will not only help me a lot, but you will also show that you care about nature! No problem I will pay for delivery to my address! Just call when you have something to donate!

[@StevesRykerAdventures]

Killer!

[@mikeganjavi637]

hi Steve just let ruba do these videos

[@jakeryan9469]

3:30 Doofus Self. 5/16" hole.

[@amelierenoncule]

0316 EEST EVERY motor-vehicle/cycle/scooter that I have ever owned, had an A-horn bolted on...quickly after purchase. Even my rally machine: vimeo.com/129261613

[@davidezhang6441]

Is there space for installing it on a bv350?