🔥🔥Video#10 HPI RS4-3 18SS THE KING!! A MUST SEE🔥🔥

[@donjames269]

This should be in a museum. Very nice. I wish I knew more about how to tune, I have 3 mint nitro RS4’s myself.

[@lawmensrc5882]

Thank you so much my brother!! I love building these cars! Finishing up one soon I’ll be posting! Thanks again!

[@narcissisticnihilist9718]

Gorgeous. Wolunstart makes a transmitter controlled electric start that would look tremendous on that build, I love it on mine. Took a lot of work to get those alloy parts tight, but I finally got all the bugs worked out. Now I dont wanna drive the new out of it, just look at it. I used a kyosho hellcat body. Those fazer bodies are like 205mm in the front. Looks amazing bro. well done.

[@TexasHill]

I put the video in super slow motion and mute, while I watched it for at least an hour now. I guess this what they mean by "Eye Candy" I think I'm going to do a video like this of my X-Ray R8 now... lol Just, super slow motion while rotating , no talking... The build speaks for itself. Great video man, Thanks for sharing.

[@lawmensrc5882]

Thank you my brother!! Im almost done with a build that I never thought I would get into but it’s Ben fun so for.. halfway done with all the upgrades .. on redcat kaiju ext! It’s looking really nice! I’ll upload soon!

[@adamgonzales6844]

Badass build big fan of this I admire this build

[@lawmensrc5882]

Thank you so much my brother!

[@lawmensrc5882]

I will let you know for sure! Thank you again!

[@Fallenicons24]

Awsome build man!

[@lawmensrc5882]

Thank you so much my brother!

[@Gas45678]

Hey homie got a couple questions. So the nitro rs4 super had longer control arms from what I take ? So they will widen the suspension?… I will buy the super rs4 arms if so now I may try to fit them on my electric also. I just picked up a nitro rs4sport so I could do some indoor driving over the long Canadian winter. Cheers man thanks for the ideas 💡

[@brianadams3690]

Very nice build!

[@lawmensrc5882]

Thank you so much my brother !!

[@TheK20eg]

Thing is sick 🔥🔥 i have a Rs4 3 evo with the 15fe motor i wanted to upgrade the motor to make it faster i was wondering if u can help me idk what motor fits this car

[@lawmensrc5882]

Brother, thank you so much for watching the video.. I hope get to subscribe and like.. well .. I mean you can go crazy with your car but I would stick to an hpi G3.0 or .18 nitro engine .. upgrade the clutch shoes and go with higher gearing on the clutch bell .. I would go maybe 18.. to 19 tooth gearing .. it should fit with no problem ..I hope this helps!

[@TheK20eg]

@@lawmensrc5882 i appreciate the help can u send me the links for everything?

[@ramos.nitrorc]

what kind of rims and tires?? part numbers??

[@lawmensrc5882]

How are you Alex? These wheels and tires are off a HPI Super Nitro! They are a little hard to but you should be able to find on EBay! Just look up hpi super nitro wheels!

[@ramos.nitrorc]

@@lawmensrc5882 thanks

[@greddytalon]

Would love to hear it running, do you have any videos of it running/revving?

[@lawmensrc5882]

greddytalon hi! No I do not but I will Definitely do it and upload it I’ll let you know thank you!

[@greddytalon]

@@lawmensrc5882 Thanks man! Beautiful ride by the way!

[@lawmensrc5882]

greddytalon thank you 👍🏼

[@soulbrother3299]

Just bought the evo...I have the 1st generation rs4..cant wait to get it in a few days...

[@lawmensrc5882]

Man let me know!! The evo is a great car!! Love my rc’s.. !! Rs4 is one of my favorites!

[@themotivator1698]

Hey man, love the car and everything you've done to it! Out of curiosity, where can I buy that piece you have on the carb to help tune it?

[@lawmensrc5882]

Joshua Katz thank you so much my brother!! I have to upload other videos but just haven’t had the chance.. but stay tuned! You can find it on eBay it made by hot racing.. just measure the carb dial !

[@themotivator1698]

@@lawmensrc5882 Perfect, thanks!

[@hunterleroux1535]

King Ceasar! It looks super clean and real solid with the aluminium. 2 questions if you dont mind please. I also thought about making it wider, is it worth the effort regarding control? Did i understand you correctly the shock setup is hard? Wouldn't it handel better with slightly softer shocks? Thanks for sharing , would love to hear what it sounds like!

[@lawmensrc5882]

How are you? Thank you for the question!! So I love race cars (real cars the ones we drive)..lol! and when I was putting this car together like my other cars I was building it with the real race car in mind.. so real race cars have very stiff suspension and the wider wheelbase. And the performance is crazy so that in mind I built this car with the same concept! The tighter the suspension the better the turning and handling and when you add the width it’s just that much better! So go for it you won’t regret it!

[@Ryan-pokemon4life]

I have rs4 evo m3. I need new shocks do u recommend any i cant find any found the gmades on amazon what mm do i need for the front the for the back

[@lawmensrc5882]

Ryan hi.. sorry for the delay !! So it GMADE SHOCKS 62mm.. you can can also purchase the springs from the 75mm Shock they will fit .. it will give you more tension if you want.. eBay sells them ! I hope that helps !

[@Ryan-pokemon4life]

@@lawmensrc5882 thanks

[@pavlost1108]

Lawmen’s RC What wheel are those?

[@lawmensrc5882]

Pavlos Tsitlakidis those are the hpi rs4 super nitro wheels .. they are a little bigger then the 200mm wheel set

[@Ryan-pokemon4life]

@@lawmensrc5882 i just kept the same shocks i put stiffer oil in them and bought some hpi stock shock springs big difference in the 35 shock oil

[@brianwood9849]

I see that you put a different motor in yours and I’m looking for one for mine. The stock motors crankshaft in mine measures 19mm from face of front main bearing. I seem to can’t find one with this crank. How did you get yours to work? Any help would be appreciated? Thanks

[@lawmensrc5882]

So hpi makes the G3.0 engine that has a longer shaft and the T version which is shorter .. eBay has them both .. I believe check it out.. let me know!!

[@brianwood9849]

@@lawmensrc5882 I found a G3.0 on eBay, will it work? It already has the pilot shaft on it, so I won’t need the screw on pilot shaft. The shaft looks longer though to me? Thanks

[@lawmensrc5882]

It should work that’s the engine I’m using on this car!.. great little engine lots of power

[@brianwood9849]

@@lawmensrc5882 how did you mount the clutch and clutch bell on the different shaft? Did you use the stock stuff or have to buy different stuff? Thanks RC brother

[@lawmensrc5882]

I upgraded to a three shoe clutch and think I used the stock 2 speed clutch bell

[@brianwood9849]

Man the car is beautiful. I don’t think your crazy lol, I love the aluminum builds myself and staring at them. There are the shelf queens and then the bashers. I got my old HPI RS4 3 off of shelf and going to buy some aluminum hop ups for it along with a new SH Engine for it. It’s probably around 15 years old and has been on my project list to fix up. There seems to be quite a few aluminum parts still for it on eBay. Nice build buddy 👌 NITRO IS KING 👑

[@lawmensrc5882]

Thank you Brian! I really appreciate it!! I love my nitros .. thanks for watching .. putting together a hyper sst nitro .. as soon as I’m done I’ll post it.. thanks again brother !!

[@mach389]

Are the diff case gpm also??

[@lawmensrc5882]

I don’t remember if they’re either GPM or Megatech!

[@lawmensrc5882]

But both are really nicely made.. megatech went out of business !

[@mach389]

@@lawmensrc5882 sucks I would’ve love to get some in the future.

[@manchuperez3287]

Is a nice bild but tires will be out the fenders no no

[@adamgonzales6844]

If you would ever consider selling i would be very interested

[@MoosemanR]

Put the OS 18 CVR on it.

[@lawmensrc5882]

How are you brother? .. that would be a great engine upgrade ..

[@MoosemanR]

@@lawmensrc5882 Doing good just got out my old nitro Rc's I have an OS 18 on my RS4. Going to fire it up soon!

[@trinibad_amgc43]

Sick build so hard to get parts I applaud you ....

[@lawmensrc5882]

TRiNi John .. thank you so much for watching !!

[@trinibad_amgc43]

Parts list ?

[@themotivator1698]

@@trinibad_amgc43 not sure if you are still looking but the parts are very ez to find on ebay, just lookup hpi rs4-3 aluminum shock tower, and click on it, then scroll down to "similar sponsored items" and you will see SO MANY other aluminum parts for the car lol hope this helped

[@dropaholic318]

Where can I get that screw kit?

[@lawmensrc5882]

dropaholic318 hi! Thanks for watching the video!! The screw I got on eBay.. I’ll be posting new videos soon.. thanks again, I hope this helps!

[@2259alfie]

Sir you have inspired me with your custom nitro cars and monster trucks. I am restoring 2 Teams associated NTC3’s 1/10 nitro cars I have aluminum parts one will be two speed and the the other will be Dynamite All Red aluminum chassis and parts . Installing a GIMar .12 Neptune the other OS Speed 1204T both fully modified by Mr. Rick RBMODS

[@lawmensrc5882]

Man, thank you so much for watching.. your two builds sound sick... It’s gonna be crazy. Please let me know when you’re done with them.. I would love to see you how they come out!! I have a kyosho GT that I’m almost finished with. I’ll be uploading it soon.

[@RevMluxgladius]

Sweeeeet car man!

[@lawmensrc5882]

Thank you so much!

[@DutchMrD]

love it

[@lawmensrc5882]

Vaping Rc Dude thank you so my brother.. waiting for me daughter to fall asleep to upload it.. stay tuned!

[@sohilmeah2072]

Hi I really like the rs4 3 evo, will sell it please let me know thanks

[@lawmensrc5882]

Thank you for watching the video.. you have good taste .. it’s a great car!! I will definitely let you know!! Thank you again for watching

[@reubenrobinson3444]

Nice work.

[@lawmensrc5882]

Reuben Robinson thank you so much!! Thanks for watching !

[@pavlost1108]

Lawmen’s RC could I do this to my rs4 evo 3 ?

[@lawmensrc5882]

Pavlos Tsitlakidis hi.. sure thing they sure almost the same parts !! eBay has a lot of parts for this car !

[@mach389]

👍👍

[@lawmensrc5882]

mach389 tha k you my brother !

[@Chris-iu9qi]

thats a t3.0 engine not a 18ss

[@lawmensrc5882]

Thanks!! I wish I could edit that part.. lol

[@dazspurs9899]

most RC aluminium is junk mate,just adding loads of extra weight for a bling effect,if that's your thing good for you mate

[@lawmensrc5882]

Yeah I love doing these aluminum builds .. everything stays tight!!

[@dazspurs9899]

@@lawmensrc5882 that's your choice mate the car looks great

[@lawmensrc5882]

Thank you so much my brother !!

[@manuelcorradini8233]

Troppo pesante,la.plastica assorbe gli urti,questa macchina se esce fuori strada esplode

[@manchuperez3287]

No bodie uses tires are to wide no like

[@lawmensrc5882]

Working on a pan body.. it’s going to look crazy..