Well done. Many people in metropolitan areas would not realise the levels of skills a modern farmer need to master if he, or she is going to have any chance of being successful at farming, and off-cause, there are also the vaguaries of the weather to contend with, plus the issue of fluctuating prices for produce, and dealing with potential pests and diseases of plants and livestock, and at times bothersome bureaucracies to deal with as well.! Good thing there still are skillful hardworking farmers to supply most of our daily food requirements.!
@mustafagezgin50422 жыл бұрын
Dilinizi anlamıyorum ama videolarınızı izliyorum. Bende de 1963 modeli var, Massey hastasıyım selamlar.
@jamescraven480 Жыл бұрын
I don't hear so good, why did you change the back tires? Thanks for the video.
@crimsonsunshine2642 жыл бұрын
Good little job done dan, didn’t take too long & has prevented a potentially much bigger job or breakdown! Just looking straight at the dynamo bracket there on the first camera angle and just wondering how it’s held on as the two bolts that screw into the timing cover look to be missing ?
@CowfarmerDan2 жыл бұрын
Yes, it's not the original engine and has a bodged bracket as the holes in the timing cover are stripped.
@paulf25292 жыл бұрын
I've been looking forward to this since your Instagram post!
@adeyrussell8432 жыл бұрын
Love the content Dan , keep up the good work, classic farming still the best!
@steviechalmers12182 жыл бұрын
Just noticed you haven’t got a Roll bar on the 35x
@nicklewis14752 жыл бұрын
Great video Dan, such a simple but ingenious system. Is there any reason you don't seem to use penetrative spray before undoing old bolts?
@CowfarmerDan2 жыл бұрын
They're moved regularly so not seized.
@robertsmith98102 жыл бұрын
Dan you will have to look a for a Ferguson system jack lifts all the wheels in one go be bit of fun if you can find one
@malcolmtyler25652 жыл бұрын
I think he's got one
@CowfarmerDan2 жыл бұрын
kzbin.info/www/bejne/pIDUpIZ-r7WUmdU
@paulancill3872 Жыл бұрын
If you are getting that muck in the bowl why is it not filling the gaze filter in the tank?
@CowfarmerDan Жыл бұрын
There may not be one in the tank. I'd sooner have it in the bowl and clean it out easily than bunging up the tank filter and stopping the fuel flow.
@qaisarmahmood7070 Жыл бұрын
Greetings from Peshawar Pakistan. I keep dairy cow and love to operate tractor on my land.
@tonymorgan35262 жыл бұрын
Great video Dan, I think you need to invest in a role bar, just thinking of you that's all, even if you're ground is flat I've rolled a tractor and trust me it's fucking scary!!
@dannydavis19642 жыл бұрын
Good video do you know what other wheel rims will fit on my 3600 Ford tractor as I've been looking on eBay and I wondered what other ones will fit it thanks Danny
@deranocasper2 жыл бұрын
Good job Dan you always look after your tractors I have put new clutch kit washed backend out of tvo new diff bearings I am going through my we tractor there great to work on 🚜👌
@robertsmith98102 жыл бұрын
YOU cant beat the old type oil bath air filters When MF changed to dry air filters a neighbour wrecked his new MF135 by not keeping his air filter clean I should ad he farmed very sandy soil the sand got in the bores and acted as sand paper
@kennethstuart2003 Жыл бұрын
Brilliant video Dan as Always on the 35 takes me back many years first tractor with the scraper Great wee Tractor.
@bobpaterson18452 жыл бұрын
No laptop computer an a degree in IT to service a 35 🙄 no AD blue an forced regen to be done 👌 an most important doesn't cost the earth 👍👍
@bedfordpump2 жыл бұрын
I love seeing your tractor maintenance videos Dan, especially on the classics. Make me feel like I should look at getting a 35 when I am in market for another tractor.
@casto-2 жыл бұрын
🤔So why no 550??🤣🤣🤦♂. I do enjoy the simplicity of the old girls, it never a few week job, just half hour ones. Can’t wait to see her out putting seed in 😊
@CowfarmerDan2 жыл бұрын
There's always one who's a bit special 🙄
@780special2 жыл бұрын
Excellent and informative. Brilliant small tractor the 35.
@russellpetrie1192 жыл бұрын
have you tried sticking a few coins or washers in the jaws of the spanner to make gap smaller
@sggibson622 жыл бұрын
One seed per hole , no singling 👍 . I hated singling swedes and mangolds when I worked on a farm in the early 70s .
@justinglenn18442 жыл бұрын
Great video Dan,them old Massey Ferguson’s run forever
@fredbiscuit...4132 жыл бұрын
So who's the vintage one - the Tractor or it's owner? Lol....
@patrickaherne35982 жыл бұрын
You should leave it set-up like this, unless of course there's a storage issue.
@donnellykieranj2 жыл бұрын
Another gr8 vintage Thursday Dan
@josedelmarmattos1822 жыл бұрын
Ágora está pronto para trabalhar nas montanhas 😂😂😂🇧🇷
@robhardingham67702 жыл бұрын
Aaahh, those metric adjustable stilsons to the rescue :)
@dannydavis19642 жыл бұрын
I forgot to say there 8 stud wheels thank you for your time Danny
@masseyman62902 жыл бұрын
Nice one Dan, look forward to the next instalment 👍
@Lisa_Turner2 жыл бұрын
Golden opportunity to demonstrate the Ferguson jack on the 3pl
@CowfarmerDan2 жыл бұрын
kzbin.info/www/bejne/pIDUpIZ-r7WUmdU
@steviechalmers12182 жыл бұрын
Cracking wee tractor, great channel 👍
@paulthompson84672 жыл бұрын
Brilliant video Dan thanks for sharing 👍
@tomwhelan46072 жыл бұрын
really enjoyed, thanks.
@peterhoughton15892 жыл бұрын
Hi Dan, what did you spray into the glass bowl when you cleaned it out? I noticed you didn't put stabiliser on when you put the Stanhay drill on the tractor. Don't you use them?
@CowfarmerDan2 жыл бұрын
Just some brake cleaner. The drill follows well enough without stabilisers.
@kcphillips10002 жыл бұрын
That engine does not sound right to me Dan . Sounds like one of its inlet valves is not seating .Maybe not enough valve clearance . By the look of the non standard dynamo bracket it was probably fitted with an alternator at some stage of its life .
@CowfarmerDan2 жыл бұрын
It's not the original engine
@antonyfarming2 жыл бұрын
Great setup 👍
@laytonphillips66672 жыл бұрын
Great explained video dan, if you put the row crops on normal width would there not be 2 rows in the middle and 2 on outside?
@CowfarmerDan2 жыл бұрын
We tired it last year when we changed the drill, it doesn't work out.
@williambowman1552 жыл бұрын
Another great video 👍
@jamestucker20882 жыл бұрын
brilliant video dan as always!
@russelljohnson48472 жыл бұрын
Didn’t you have to put stabiliser bar on to keep it straight and rigid Dan.
@CowfarmerDan2 жыл бұрын
No, it follows well enough once in the soil. If it's held rigid a small error in steering is magnified in the drill rows.
@graemebowyer49012 жыл бұрын
Very enjoyable video, you cant beat a pair of Stilsons wedged against a lower link arm. Be careful with comments about 60 yr old nuts, some of us are sensitive !! A well place right boot always aids hitching on an implement. looking forward to the drilling video.
@CowfarmerDan2 жыл бұрын
Tractor nuts are a different breed 😁
@graemebowyer49012 жыл бұрын
@@CowfarmerDan Love it, i just couldn't resist the temptation !!