Want to support me and my channel? Buy me a coffee with crypto. Thank You!! commerce.coinbase.com/checkout/c113561f-4823-4c31-8419-df4a8fe0a210
@JoshWithrow6 жыл бұрын
VBR 2 Pass does NOT encode twice. What it does is two passes over the raw clips. During the first pass, an analysis is done on how each frame should be handled, and it's looking to find the areas of each frame that require the most attention. During the second pass, the actual compression is executed. This produces better compression for projects with alot of movement. Also, changing your framerate from 29.97 to 30 doesn't accomplish anything. Next, to get full effect of the compression due to the audio compression techniques, you should set your audio to output at 44khz because KZbin recompresses the audio to 44k anyway. Last, for 2.7k video KZbin will support up to 48mbps. When streaming back down, it will utilize this higher bandwidth while sending 1080p, which is why 1080p from KZbin that was uploaded as 2.7k looks so damn good. Good information, man, but based on all of my experimenting, you're just alittle off.
@ViperFPV6 жыл бұрын
Thanks I figured someone who knows alot more than I would give even more information then I have. Thank you for your tips and explanation!
@JoshWithrow6 жыл бұрын
@@ViperFPV Btw, my intention wasn't to come across brash. But you and others can benefit from this information.
@dikurday4 жыл бұрын
Im using QUCKTIME PRORES 422 and quite great. but of course the size will consume your hardrive. but is better rather than sacrifice the quality
@TonyStackzz5 жыл бұрын
what if you put your target and max bitrate to the max?
@ViperFPV5 жыл бұрын
U would just be waisting hard drive space and upload time. 1080p video has a max where there is no benefit from increased bitrate.