Homemade Air Paint Spray gun

[@eclipsesolar8345]

Amazing. And for the people asking about paint i advise you with this: - Use any regular paint, thin it down with proper thinner ( water, etc... ). Aclicic can be used also, thinned down. Water based diluted pigments works amazingly to. 👌

[@krishnarao3768]

Normally one uses emulsion paints or plastic paint to spray. I guess an artist could look at using watery paint or thinned down paint with this spray gun....

[@mubashirhussain4107]

I did this years ago

[@mubashirhussain4107]

By the way good idea

[@NEGOMIL]

m.kzbin.info/www/bejne/lavIhmB8edtjpNk#dialog

[@everysong7197]

nice

[@sathyanarayanandhanuskodi1734]

The way you put that bike valve inside the bottle. Superb idea

[@aadilmalik6507]

That was intelligent !

[@kirbychoyyee]

magnet

[@majigaining]

My thoughts exactly

[@Mustafizur_Art]

kzbin.info/www/bejne/fJi2aKKDlKZsh68

[@kiranbhoi2367]

sach me bhai bohat acha jugad kiya like it 10 stars

[@viju8366]

The way you inserted the valve is super.. very good idea

[@FJVlogsbyfaizal]

Yes really, 3 times i repeatedly watched for the secret 😃

[@amitkumarvaghela308]

Thanks sahi time pe apka video samne aa gaya

[@akashbarik1803]

The best thing in the video is.... You didn't pull it long unnecessarily.... 👍👍👍

[@youngtoo145]

kzbin.info/www/bejne/gmOZg3Wlir1peKc

[@Mustafizur_Art]

kzbin.info/www/bejne/fJi2aKKDlKZsh68

[@drakedorosh9332]

Your threading the piece in trick at 2 minutes was worth a thumbs up alone.

[@tunkunrunk]

2:57 is the funniest part, like in Tintin's cartoons

[@Alex_Gamerz_]

Nice video

[@AndyDaviesByTheSea]

Hi nice idea, I guess the failure mode is that the bottle cracks around the hole for the cycle valve? If that's the case try lightly melting the edge of the hole with a kitchen gas torch. Heating it just enough to smooth off the edges of the hole will help to stop it cracking and covering you with paint. Kind regards . . . Andy

[@jjajomius1848]

Wow idea bagus kawan,ok sudah hitam ya support kita punya👍🤝

[@barnybrewman1571]

Cool. I did this very exact thing to dump leftover WD-40 into, because I had about a dozen WD-40 cans that always run out of propellant with about a quarter can of product left inside. Now I pop a hole in the can and dump it into the spray bottle, works great.

[@gottadutch]

Maybe a little late on this , but I'll give you a better way to get all the WD-40 out without puncturing can and transferring... Cut the valve stem off an old bike tube , remove the spray cap off of your can of WD-40 and use the valve stem in place of it (kinda like an adapter) to pump in some air with an air compressor. This will allow you to get all the WD-40 to spray like normal. Just don't go crazy with the air pressure when refilling the can.(common sense I hope) I don't go over 90psi and never had any problems. I've refilled all kinds of spray cans over the years like WD-40, PB blaster, glass cleaner, etc. Works like a charm! If my instructions weren't clear, there are several videos here on KZbin that show you how it's done.

[@srinivasaraoparuchuri4845]

Very nice, cheapest and useful. Tq v much.👍👍

[@nandu8673]

सबसे अच्छी बात यह लगी कि आपने जो उपकरण बनाया उसकी कमेंट्री नहीं की ,नहीं तो बहुत से वीडियो बनाने वाले कमेंट्री कर करके पका देते हैं, आपने छोटे में ही बहुत सिखा दिया ,अब चाहे पेंट ना भी हो इसमें हम लिक्विड कीटनाशक भरकर कमरे में HIT की तरह प्रयोग कर सकते हैं 👍

[@birispearo3448]

Good job...nice tricks and tips for DIY ...EFFECTIVE SPRAY...

[@kubendranponnaihthevar1252]

He has well explained the principles of spray paint with easy to understood by even simple or non engineering knowledge person

[@DashtinGirasol]

You just save me from buying expensive spray paints. Now I can make one. You are a God send. Thank you for sharing.

[@mijalic1]

Great instruction. Thank you for the time and effort you took to make this video and share it with us. Greetings from Croatia.

[@lefthandstory1280]

Nice upload friend ,amazing work👍👍👍

[@harshavfx1836]

1:58 what a technic 👏👏

[@zubershaikh5546]

Very very nice video sir thanks sir I'm so happy

[@spicykhaoadaoaasmr6534]

This is really a great idea! Thanks Boss.

[@everythingispossible6484]

Bed idea.

[@user-ky2vl2wm3j]

@@everythingispossible6484 Bad spelling too🙄

[@ИванДурак-з9я]

Brilliant idea for SpaceX projects to save money 🤑😝😝😝

[@TheRadioman1947]

i tried this but not enough pressure , so i hocked my air tank to it, well it work until it exploded ,but i had a instant paint job, my shop was now red. and me,

[@Ra1276]

🤣🤣🤣

[@sourav6534]

😆😆

[@silvestermsigwa9730]

🙂🙂

[@mrkayzzz007]

🤣🤣🤣

[@Privatees]

Great idea and there is room for improvement. If it is fitted with a small electric gas compressor, it will be constantly inflated and will not have to be pumped again and again.

[@paulbains9152]

Great video, the bear foot caught me off guard , I laughed .

[@babygun4794]

Kangaroo foot

[@tunkunrunk]

ah ah ah! so funny

[@RepairandInventions]

I think everyone must have this at home. A very simple and useful invention

[@Comment_morbi]

Nice DIY. But Same more Convenient product available n used by petrol pump for window cleaning Its available in market at Rs 70 . Which has pumping and holding handle too.

[@myarvind]

Please provide the link

[@امیرآتابای]

دمتگرم واقعا ابتکارت عالی بود. زنده وسربلند باشی

[@sultank5244]

Always use a bottle made for carbonated drinks because they are designed to endure that much pressure. A water or fruit juice bottle will explode with very little pressure

[@-I-declair-adumbwar]

Once you start cutting holes in it, throw any "designed endurance" out the window.

[@jasonspoelstra7489]

CSD bottles

[@youngtoo145]

kzbin.info/www/bejne/gmOZg3Wlir1peKc

[@markhall302]

I am saving this video in a playlist, i will be attempting this in a couple days for my acrylic paint thinned with either dish soap or gesso. I will come back and tell you my results

[@yodel_diploma2315]

how you got the bicycle valve in position - marvelous 👍

[@satishpatel1865]

Vah Bhai vah.suparb.

[@gabrozario]

That was so simple and great.

[@55chamara26]

Nice water spray gun🔥🔥🔥

[@potatoeggscramble5466]

Dude, this is amazing. Thank you so much!

[@mrhkexperiment]

great

[@joeyalfaro2323]

You can thin your paint with paint thinner if it's to thick. I use cheap detail gun sucks cleaning it.

[@ProckerDark]

if you want to thin paint, add gasoline

[@b2muzik72]

Awesome 👌👏👌👏

[@sunnyvoid7206]

I like your design. I'm a little surprised a pop bottle is adequate with air pressure and a thin plastic. Have you considered modifying an old fire extinguisher?

[@lemmetellyousomething679]

Well it holds the pressure of Co2 inside drinking even after lot of shaking. Only things is red circle here are fitted parts

[@jdtech7072]

I am your fan sir I want to make project like you

[@fCauneau]

@02:11 love the trick to bring the valve right into the hole !!

[@JDLearningTube]

Mind blowing Trick...!!!!!!! This can be summer solution.......Thanks.

[@bobbybobby6056]

If we start spraying paint and leave it for few minutes then the paint will stick inside the pipe or nozzle and the passage will be blocked as the pipe is very thin....

[@aghaabbas1]

turn the bottle upside down and spray out whatever remains in the pipe and nozzle. That's what one does with spray cans too bro.

[@saadkiyani551]

Excellent bava g

[@callantatarlit7555]

Spray paint. When they use an example water. So it's water spray not spray paint.

[@mohammedali-gc6ng]

India mein talent ki kami nahi hai bas inko aagey badane wala koi nahi

[@garrisong2356]

Hmm, what to do, buy sprite bottle, tire valve, spray nozzle, tire pump, and paint. Or you know like just buy a thing of spray paint for a dollar

[@marcelocandioto785]

@Frank Olivieri or for a good Pantone colors that are copyrighted 😏

[@mustafakalyan8008]

Its very interesting Excellent i like it

[@chellson2399]

idea is very useful for water based colour spray, nozzle May vary for paint products.

[@ronaldbarcenas5860]

Kaninang ginto.

[@Kasaudika]

Amazing vdeo thanks for sharing

[@goriopukolo]

i love this...spray paint is so much expensive,...just buy ordinary paint and mix it up,...i can now DIY painting my stuffs...thaaaankksss

[@fashionandcraft9250]

wao bro amazing idea

[@fazlerahman7470]

U should fill paint in the bottle at the place of water

[@awesomeindian2109]

Paint more thikker than water it won't work

[@jsgg7735]

hey you made it through 2020! at the end of this vid i finally get the message! haha!.

[@aneyefoaneye9348]

Why am I feeling the need for weed watching this

[@Wonderplaces-u4e]

Bong

[@michaellalor3766]

Watching fr Jamaica with a big splif (weed) n a cup of tea

[@jas_stm]

Let's have it after all cures corona. Wish very soon all gov approve this shit.

[@smpn4tanantovea1804]

WOW !!! Good Job 👍 👍 👍

[@sicks6six]

Street graffiti artists just saved a ton of money.

[@pleasureofvoice9531]

Lovely brother, you are so Talented 👍❤️

[@hassaniftikhar8109]

Iskay liay air pump bhee khreedna lazim hay, aur paint thickness Ziada honay per kam nahi karay ga.

[@hkvisit6158]

Double coating krle yr

[@magitingtv.7704]

Sending my full support Sir God bless you sir 🙏 from Philippines

[@belabear]

I thought it was a water bong when i first saw it ✌️

[@manojbhoi3593]

Good idea. Very very Thanks.

[@marvincastillo4515]

That's a MacGyver right there... 👍👍 thts cool...

[@jasonbingham7553]

+

[@zaraewilkins]

One thing I wondered - as you use this, do you have to keep pumping it up with air, or does the pressure last until the paint gets to the bottom?

[@juniorstudent2484]

...

[@Jeremy_jerer]

Hey Did you find the answer to this yet

[@Babis_music]

I think neither. Air lasts for few seconds and you have to pump again.

[@gojosatoru2065]

I know u saw bong first 👀👍

[@balachandar97]

Yeah🤣

[@anuradhatadwalkar6189]

True shit🤣

[@simrandeepsingh13]

The best part of video is absence of background music 👍👍👍 perfectooo

[@azazhusenjalali2133]

Great idea, but i think you sprey whater, please make videos with paint.

[@davidhk1883]

good idea but if you use the wrong paint thinner or paint you will melt your plastic bottle but enjoyed vidio

[@mustafagaming3993]

Absolutely helpfull creation keep it up

[@NasehatMotivasi]

Nice creativity

[@MuhammadAshraf-px5mt]

This channel makes a spray paint,,,, Peoples reaction : ?!.,?! 5 minute crafts makes a spray paint,,, Peoples reaction : OMG🤑🤑🤯🤯😱😱

[@siroedhiekreasi]

Very very amazing 👍👍👍

[@tx3500]

As u have shown bike tire waves same manner u should give names of adhesive .To make this I have to purchase any spray bottle.

[@brijeshverma3432]

Bro it is called 'm seal'.. U can find on hardware shop

[@rjsquest3913]

@@brijeshverma3432 Uttar

[@RihanKhan-vv3ey]

You are great bro your genius

[@DeusVolo]

Legand has it the cameraman died when the 1st prototype exploded sending shrapnel everywhere!

[@johannahunderwood4596]

Amazing! I didn't realise that this could be done.

[@suoppsdn9751]

New subscriber. I guess you could make your own paint for the sprayer. You just buy regular paint and add paint Thinner to thin it out enough to go through the sprayer. Great video thanks for sharing

[@seeburgm100a]

sure til the thinner attacks the plastic bottle and it explodes paint all over you..

[@suoppsdn9751]

@@seeburgm100a Water based paint can be thinned with water

[@seeburgm100a]

@@suoppsdn9751 but that spray can nozzle is designed to atomize solvent based paints. Water based paints will not atomize properly, unless of course your only goal is tagging something w graffiti.

[@suoppsdn9751]

@@seeburgm100a You can put up to about 200 pounds of air pressure in a coke bottle. Believe me it will spray out

[@toffybatter1034]

Yes but the thinners will melt those plastic bottles

[@msnhaart9844]

This is great and brilliant idea

[@PiyushUnnithan]

Amazing idea. Thank you for posting!

[@washingtonsilva680]

Muito bom, o melhor vídeo que já assisti sobre o assunto. Parabéns...

[@Shkunk1]

I honestly thought it was a picture of a homemade bong.

[@dscbsouthex1072]

kzbin.info/door/NqfW6-xgU1HqiUdmwSaDTQ

[@natesansan215]

Superb idea. Headsoff you.

[@vinaysharma93]

Colin ka bottle use karo koi modified nahi krna padega

[@Durgeshkr00]

Nice idea. Thanks

[@cvmchoudhary5360]

@plz no smile Glass saaf karne ke liye aata Plastic bottles me blue color ka liquid Mean glass clean karne ka ek product hai.

[@krishnarao3768]

Demo mein paint daalke dikhana chahiye tha. Theek kaha kisi ne: paint aur pani mein bahut antar hota hai gadhaapan mein. Fire extinguisher bana rahe hain toh theek hai!😜

[@gulljee7473]

Very good idea sir ji

[@vpineyro20004]

Lo que más me gustó es como hizo pasar la válvula de moto o auto a la botella, sin que se callera. Lo mejor

[@youngtoo145]

kzbin.info/www/bejne/gmOZg3Wlir1peKc

[@RamuRamu-fc8cl]

Very good... super

[@reeshalkumar7758]

*I'm thinking what will happen to the spray paint companies after this life hack* 😂😂😂

[@thefz777]

Very nice job

[@HiAsTV]

This working only water Not working paint because paint is fat

[@karankaushik2234]

Bhai jis spray bottle me spring wala sprayer hota hai wha bhi kaam kregaa yeh jaise aapne deodrant ka liya agr mai plants wala spray ka sprayer lu toh wha se bhi aise hi function krega yeh??

[@sonakhal2226]

Plz change your title to "home made air water spray gun " 😁😁😁

[@FissionCreations]

Good one

[@kirankumar194]

super idea👍👍👍👍

[@smallclips4164]

Paint spray gun steps- 1: Take your car out from garage 2: Drive to Walmart, dollar store 3: Drive back to home

[@hispanicuscorpus]

is this before Covid 19 or after,,,if after.....you need to put on your list, long line :(

[@smallclips4164]

@@hispanicuscorpus I just got depression reading your comment 😢😢 Waiting for things to be normal so that we can go to theater to watch movie, screaming and enjoying together.

[@Ra1276]

You my friend are a genious... or very resourceful...or you could be a copy cat...I dont know...but what ever it is you impressed me

[@roldanchong6284]

Nice! Using paint as glue

[@jibrilmansur1320]

Smart now let get this man to 1 million subscribers

[@raiskhan5402]

Bhai paint Ke sath chalakar batao

[@kanpurunplugged9970]

Paint clog hoga thats why

[@corvettekiller96]

Well this is genius😎🤙 good job dude!

[@kellybates1972]

I see a paint bomb. You know somewhere, someone is going to over inflate this and POW! paint everywhere.

[@goldvulcan9284]

hahahaha hopefully they test it first. but the title should have been homemade reusable spay can. i think that woukd grab more views

[@tuxnoel]

I think reusing plastic would be less of a risk