Volvo Amazon Restoration - Part 23

[@bsheedy7639]

Awesome job. Keep going with it, will be an awesome experience once u get behind the wheel. Fan Sydney, Australia 🇦🇺

[@RollinHeritage]

Amazing to see that people from all over the world watch me build this car! I love it. Thank you so much for the support 😄👍🏻

[@EdwardThomas-mn5vd]

You are still doing a brilliant job!

[@rustyshackleford6092]

Congrats again on the shop with lift! Exciting.

[@togst]

Another fantastic video with some very thorough work performed. This will be a very solid car for many years to come. Sounds like you have a lot of nice quality of life improvements on the horizon as well with the new shop. Best of luck! Need to bring my Amazon back for rework. Apparently the sills were welded on a bit too far towards the rear, creating a gap in the front where rainwater can flow into the cavity. One of the holes for the trim on the rear quarter panel was either welded shut or filled with body filler. It is of course the one closest to the rear door that I have a hard time reaching from the boot. Hopefully something can be done to remedy these issues.

[@jplock-mg8mx]

There is no end to bodywork...😁

[@RollinHeritage]

It sure felt like that for the past year 😂

[@henriheinonen6258]

Looking super good. That footwell rust seems pretty familiar, just did almost same repair on my mine amazon, last week.

[@einfeldt777]

Ooh my goodness, your arms and shoulders must be killing you after all that work 🫣🫣🫡 Great video update, your perfectionism and willingness to just keep going is really inspiring to see. Can’t wait to see your new shop 🤗🤗🤗🤗🤗🤗🤗🤗🤗🤗

[@RollinHeritage]

Hahaha yeah my neck and back were not really happy. I can't wait to finaly have a 2 post lift in 2 weeks! I will make a full video of getting the shop, getting it ready and installing everything so i'll do my best! 😄👍🏻

[@robertmagee8223]

You are doing great work..I have a 122s

[@lunkanx7804]

Very nice work! 😎👍👍👍

[@RollinHeritage]

Thank you! 😄👍🏻

[@103erik]

Great progress, I enjoyed watching. I didn't bother to strip and repaint the underside of mine, but did put the first coat of paint on it this week. I have some runs and orange peel, so will deal with that and hopefully soon spray the final coat. So you have some catching up to do. ;)

[@RollinHeritage]

I'm in no hurry. Roadtrip is canceled to the amazon doesn't need to be ready in 3 months anymore. My shop is priority number one right now. If i make more money the amazon will be done faster. It's that simple 😂👍🏻 Great job on your car, keep going!

[@EdwardThomas-mn5vd]

This is going to be some Amazon!

[@zaloks7124]

Amazing video, great progressive. Can't wait to see the new workshop :) I will be purchasing all the panels for my amazon tomorrow, I am so excited apon this journey that has begun, thank you soo much.

[@RollinHeritage]

If you have instagram or facebook, send me pictures of how it goes!

[@remcomak5616]

Goed bezig , ik heb zelf ook een blauwe Amazon b 20 van 69 al een hoop an gedaan moet zelf ook een paar roest plekjes onder bij de wielkast doen maar dat lassen dat durf ik zelf niet aan . Succes met je schop , en waar zit je schop ?

[@RollinHeritage]

Hoi! Bedankt! Volgensmij heb ik een keer staan kijken bij die van jou op VKB. Mijn amazon heeft daar 2022 ook nog gestaan. Mijn nieuwe werkplaats zit in Alphen aan den rijn. Ik krijg 29 maart de sleutel, dus vanaf +- half tot eind april moet ik volledig up & running zijn 😄👍🏻

[@PeterKonst-r6o]

Lekker bezig vriend ❤

[@JohnWheeler-f3t]

Brilliant, the good thing with brush priming you get a great coverage and goes on thicker, was it etching primer?

[@RollinHeritage]

Fertan epoxy primer

[@mongoshiter]

Looking good, great job. What sander is the little one you are using?

[@RollinHeritage]

Thanks! It's just a little pneumatic 50mm sander. Many shops sell them 🙂👍🏻

[@bigal7201]

Did you use the old gas tank...

[@RollinHeritage]

Yes, the gas tank that came in the car is perfectly fine except the filler.. the filler is soldered onto the tank and that is cracked. I'll need to fix that weld but then it will go back in the car. No need for a new one when the old one is rustfree inside 😄👍🏻

[@bigal7201]

I have a 1966 122S, I bought 3 years ago in the mountains of West Virginia, 4 door I need to send you some pictures of all the work I've done to it..

[@RollinHeritage]

I would love to see them! You can mail me them if you like! [e-mail]

[@einfeldt777]

🤔 What happened to your uploads? I hope all is okay, and that you are just busy with your new shop🤞

[@RollinHeritage]

I'm sorry.. i have no time at all to edit right now but i will try to upload as soon as i can. The new shop took so much time.. 😅