Volvo D13 Steering Pump Gears Destroyed By Engine Gear!!

[@kromesupremekstv5479]

40hrs labor that's insane,thanks for the video

[@quocbinhduong-pv4ef]

thanks anh nhiều vì pump còn mới mà hư dồi, engine volvo đẹp wá anh ơi.

[@Chancharbek]

About 8000$ parts and labour at local shop, dealer wanted for 15000$ Very common problem on D13 engines, you have to take down half of the engine and the transmission .

[@garysargsyan4998]

You have to take down the engine and transmission in order to change the bearing?

[@Chancharbek]

Yep, if it’s D 13 engine, you have to take everything down. Make sure they do complete job, which includes the the plate seal. Otherwise once you fix the bull gear and your plate seal starts leaking down the road , you ll have to pay another 8000$ to do the same job just to put a 5$ silicon . That happened to me .

[@garysargsyan4998]

@@Chancharbek how to tell if bull gear is bad without dropping the engine? Any other way to figure that out?

[@Chancharbek]

When u turn the wheel it will start making a noise as if you don’t have enough steering fluid . Then take to mechanic , the will off the fuel pump or oil pump I don’t remember for sure and will see if the teeth on gear started grinding off

[@garysargsyan4998]

@@Chancharbek do you know which year models are mostly affected? Any ideas? I got 2015 Volvo with D13 engine. So far my power steering pump gone bad, didn't take it out yet to see if gears good or bad.

[@yoandristruckdriver8285]

Hello friend, a question to change the pump. It is not complicated. I mean disarming thank you very much

[@leeworsdell1410]

I no this is old but i just picked up a used d2015 d13 and i swear i hear a rattling noise coming from that area. Did you hear anything like that

[@theride8410]

What kind of sound does it make because my dad’s truck make’s a sound that sounds like a screaming belt or something but it isn’t.

[@garysargsyan4998]

Where is that bearing go. Is it attached to the pump?

[@hectorlopez7207]

Ask you what is the symptoms when the gear go bed or they start making like a small noise ?

[@evaldojunior7963]

Where is you shop?

[@andrewm5190]

Was it hard to remove that steering pump? Did you have to drain the engine oil out?

[@dmitryeg]

No, never drain the oil, but we changed it any way to due to metal shavings

[@northeastlogistiksllc5476]

I found curled metal shavings in my 2016 volvo d13 on the oil drain plug. I took the valve cover off and inspected my overhead and there was nothing rubbing. I dropped my oil pan to inspect the bottoms and there was nothing rubbing. Could one of the gears be causing the metal shavings in the oil?

[@dmitryeg]

Do you heard any nose ? Definitely need to drop oil pan and check rod bearings, then gears. Look at shavings metal - copper or white metal? Many factors to look for

[@northeastlogistiksllc5476]

@@dmitryeg rod bearings look perfect. Working on taking the timing cover off now to inspeact the gears. Trucks oil pressure was perfect, no noise at all. There was more metal shavings when i dropped the pan, its metal shavings. Im suspecting its one of the gears

[@northeastlogistiksllc5476]

Steel shavings. Magnet picked them up

[@bluemule8]

Mine just went out. Started as noise when turning and then went out. Affected fuel also. Shop said gears torn up and they said send to Volvo. It will be there tomorrow. Is this a major repair? Does the tranny have to be dropped?

[@dmitryeg]

It is major repair, yes transmission must be disconnected

[@bluemule8]

In shop now. Twenty thousand dollars to repair. 12k just for labor.

[@kg7004]

6000$ I paid

[@SuperMomo209]

You fix it at the dealership

[@SuperMomo209]

?

[@Xoxma1013]

Нихрена не слышно