VortexLIVE: How to Select Riflescope Rings and Mounts

A VortexLIVE re-broadcast where Ryan shows you how to choose the right riflescope rings and mounts for a variety of different rifles: AR-15, Ruger American Predator 6.5 Creedmore, Ruger No. 1. #VortexLIVE
For more information or if you have any other questions, give us a call: 800-426-0048
kzbin.info
vortexoptics
vortexoptics
VortexOptics
www.vortexoptics.com

[@rwcraver]

I like that term 'Modular Sporting Rifle', a perfect use of the proper nomenclature. Many call ARs Modern Sporting Rifles, but they are no longer so modern at about 60 years old, but they are indeed very modular, which is the beauty of the AR platform. A very realistic description.

[@judgegarry]

There's been very little improvement in gas operated semi-automatics beyond the MSR platform that could warrant dropping the "modern" classification. Sure, there's lots of other variants, but, IMHO, none that would take the top of the heap claiming the Stoner design is "outdated" and no longer current... Just a thought, not criticism, mind you. (>;

[@StevenRAssmann-tb7ty]

AR type rifles are much more modern then the bolt or lever action rifle since those designs are over 100 years Old. With the Picatinny rails and all of the changes made since the sixty’s, they are modern sporting rifles.

[@juliusdro]

GREAT video ......I realized WHILE watching that I had my AR-15 Vortex 1-4 PST mounted to far forward with the front of my cantilever on the rail .........THANKS MUCH......and thanks to for the GREAT service I've received from you folks ....ALL of my optics are Vortex. The QUALITY, SERVICE and WARRANTY keep me coming back .......

[@VortexOpticsUSA]

Mike - You rock! Please reach out to us if you ever have any questions and thanks for running our glass! -Rachel [e-mail]

[@drewtorres211]

Gosh I love Vortex!!! Everything I needed to know for my new rifle setup was right here! Awesome job guys!!

[@VortexOpticsUSA]

🤜🤛

[@SAVAGE308SNIPER]

Vortex is the shit! I absolutely love Vortex.

[@VortexOpticsUSA]

We love you too! :)

[@gldrifter3161]

Great vid! Thanks for the tips.

[@thejollyjohnson9015]

Just bought my Mauser M18, I have a dozen guns all iron sights no red dots or holographic (cause my eyes) and this video helped calm my nerves about what I need and how to do it. Very good video! 👍🏼👍🏼👍🏼

[@CoryH]

Just bought tikka t3x in 270 win 2 months wasn't sure on optics but after watching videos and the werrenty is the best in the industry I went with vortex and will always use vortex because of that and the glass is crystal clear thays vortex for all you do

[@hustlerkc11]

I love that there's one person in the audience asking the question, yet he looks around as if there's more people. Very entertaining.

[@HellGatefr2]

Great info, thanks ! Just ordered one of your cantilever mounts sport for my AR-15 after seeing this video.

[@VortexOpticsUSA]

You betcha! That's awesome!

[@HellGatefr2]

@@VortexOpticsUSA I was surprised to see that the mount was made in China... I thought it would be made in USA. 113€ for a chinese product 😐

[@cdb5662]

Wow this is great info.

[@1rukie]

I love vortex it’s all I own binoculars range finders and scopes

[@RichM0410]

I’m leaning heavily towards VORTEX optics for my AR15. Your video is appreciated thank you

[@VortexOpticsUSA]

You are very welcome - thanks for tuning in! Let us know if you have any questions or if we can help with anything.

[@bryy2053]

What is the philosophy of your setup?

[@MyTube4Utoo]

*Love me some Vortex!*

[@SpetsnazBear-3710]

Great video... After my first Vortex purchase of a Red Dot, then dealing with their customer service and its excellent staff, Im now the happy owner 2 Red Dots, 2 'pieces of glass' and a Range Finder... and couldn't be happier. Now that a new PRS rifle has arrived, what to mount it with... SO MANY choices, but once I decide, I'll be giving you guys a call to "talk shop". Look forward to it. Take Care and Happy shooting

[@VortexOpticsUSA]

Absolutely! We appreciate all of the support and if you need any recommendations for your new rig, don't hesitate to reach out. Thanks for being a part of Vortex Nation :)

[@RetrieverTrainingAlone]

Excellent! For Tikka T3x there should be a pin that acts as a recoil lug on the base (Tikka/Sako optiloc system). I like Mountain Tactical Picatinny Rail that incorporates that strong recoil pin on their base.

[@USVIETNAMVET-]

I built a Remote 700 300 rum used Leopold 20 moa1 piece rail and Leopold High rings/ perfect eye to scope alignment. Fyi

[@hardybirch3630]

Excellent...…...really useful information that takes the mystery out of mounting a scope. Vortex goes the extra mile and it is appreciated.

[@VortexOpticsUSA]

Glad you found this helpful! :)

[@The_Real_Zaineman]

@@VortexOpticsUSA Question, I Just purchased a Ruger precision rifle in 308 and a Vortex Diamondback Tactical First Focal Plane MOA. 6 x 24 x 50mm. I purchased the Pro series 30 mm rings "Height High" and I'm hoping that the scope will fit with these rings and fit the rifle (mainly the height) this was kind of a guess on my part. Thoughts ?

[@VortexOpticsUSA]

@@The_Real_Zaineman Those rings will definitely work for that setup! Either the High or Extra-High would be be the way to go for an RPR.

[@The_Real_Zaineman]

@@VortexOpticsUSA Thank you for your fast response. This is my first Vortex Scope & my first "first focal plane scope" I've always purchased cheap scopes. But this time. I really wanted a nice one. The name brand Vortex came up everywhere. Top ten lists, you tube vids, etc.. Your ratings on Amazon are unbelievable. Finally, after I read your warranty, it was a done deal. Thanks again. :)

[@VortexOpticsUSA]

@@The_Real_Zaineman That is great to hear, my friend! Thanks for being a part of Vortex Nation! 👊

[@testos2701]

Good stuff! On the reversing the mount to bring the scope to you, one common issue with that is that the charging handle is right under the scope tail and it be hard to grab to pull back, on ARs anyways, some other rifles with different styles might not have that issue.

[@USVIETNAMVET-]

Vortex 5x25x50 pst viper gen2 awesome and Awesome warranty

[@jonl7688]

Great video. Huge vortex fan. I’m currently attempting to figure out if I would need a special scope and or special mount to compensate for the recoil on a Henry lever action rifle in caliber 45-70. Could you give me some clarification?

[@christophercraig9469]

Great information!!

[@harrybugarin6923]

I just bought a Crossfire II and I am going to put it on a Ruger 10/22 Takedown, which rings do you suggest?

[@BCBtrucks64]

glad you had the predator there that's what I'm putting together right now

[@brushymountainbushcraft1031]

Hey Ryan, I have purchased a Tompson Center Encore barrel from MGM in 6.5 PRC. I also ordered a Talley 20 MOA picanny rail for the base. I have now purchased the Strike Eagle 4x24x50 MM to mount on top. What size or set of rings do you recommend for this set up? Thks

[@MidnightRangeTM]

I’ve got my first AR on its way, to which I will mount my Strikefire in a cantilever mount that’s currently quad mounted on my AK. I have ordered the new crossfire red dot for my AK. I’m excited to get to do a review on such a new optic on my channel.

[@VortexOpticsUSA]

Awesome to hear - thanks for rocking our glass! -Rachel, [e-mail]

[@chadarganbright7161]

I have a Remington 700 in .308 win what base and rings you suggest for a 50mm objective? And what power ? Mostly deer hunting ,some long range!

[@TheZanzibarMan]

I'm picking up a Mossberg MVP Patrol and was wondering about recommendations on rings and mounts that would still allow me to use the iron sights in addition to a mounted scope. Any ideas?

[@erickringo1773]

What height rings would you recommend for a Vortex Viper 6.5-20x44 30mm tube mounted on my hunting rifle Savage Axis II .270 win (with accutrigger) Planning on using the Talley or leupold two piece style rings.

[@arthurborrego4738]

I bought a crossfire ll 4-12x50 scope ....and got VPR-1H High mounts not knowing scopes had specific mounts for specific models. I got them because i liked them ....rifle is a win M70 30-06..... Question is...will that affect performance ? I doubt it will but id like to make sure before i sight it in ...Thanks in advance ...

[@bambam60m]

Hello Vortex Optics, I just purchase a Springfield Armory Socom 16 and want to buy your Vortex Venom Red Dot. The question I have is concerning the mounting of the scope. should it be mounted on the picatinny rail or buy a scope mount and mounted it the way Springfield Armory has it on their Socom 16 QCB. Please advise.

[@colecraggs4745]

I have an M1A socom cqb and want to run the crossfire 2 on it. I have the attachment to extend the length of the rail system to allow more scope options. However, I have no idea what scope ring mount to get. I was looking at the cantilever scope mount 3mm. Will this work?

[@backpackingWY]

For a Ruger American chambered in.308 with a Vortex Viper PST II 5-25x50 first focal plane scope are the low rings too low to clear the defender flip caps and the bolt action handle? I'll be using the EGW picatinny rail. Any thoughts on EGW HD rail (.35" high) verses standard rail (.40" high)? Also, vortex precision match or pro rings?

[@richardlawton1023]

Talk about lapping and bedding of the scope rings. Good video.

[@toolstechandtoys5910]

Which mount would you suggest for a crossfire 2 on an ar?

[@scottv3711]

Appears there is a discussion on a forum, Vertical rings vs horizontal. Can you provide any feedback on this? Apparently they found issues with vertical rings or quick release mounts with Vertical ring mounts. Just curious, thanks.

[@justknowyourwayout]

The german Vortex website tells me that the Vortex Precision Matched Rings can be mounted on a Picantinny-rail but not on a Weaver-rail. The Ruger American Predator has a Weaver-rail but you mounted the Vortex Precision Matched Rings on it. Can you please explain why your german collegues don't recommand that?

[@malcomjohnson3181]

I have a Remington ADL 308 26 inch barrel and I am gonna put a 6x25x50 tactical vortex what mounts would you recommend

[@mikejohnston8125]

What is best position of the rings if the cross-bar doesn't exactly fit the picatinny slot? Toward the back of the pic or toward the front? I would think toward the back, since they sort-of act like a recoil lug for the scope helping eliminate the movement potential of the scope when firing heavy loads like 300 winmag.

[@pigpigdu]

the vt-cm-404 good for bolt action? my scope is pst gen2 3-15

[@NateTrucker92]

Bergara HMR, just ordered a Viper PST G2, which rings should I use? Should I use locktite on the rings? Or some other thread locker? I assume they don't need lapped. Any input would be appreciated, I'm new to this.

[@joeober4794]

Just need to confirm medium height precision matched Vortex rings are appropriate for mounting a Viper Gen II 5-25x50 SFP. Will be with a 20 MOA Picatinny rail by EGW mounted on a Bergara HMR Pro (6.5 Creedmoor). Thanks

[@redraiderreloading7612]

Joe Ober have you shot your hmr yet.. I was looking into that rifle. Not sure if I'll go with it or the bmp.

[@GetMeThere1]

It took me a sec to really understand why one (invariably) needs a cantilever type mount on an AR-15. Notice on the AR-15 with cantilever mount, and the Ruger American with standard mount, in BOTH CASES, the rear ring is just at the front of the trigger guard. Thus, scope APPEARS to be mounted farther forward, but as a matter of length of pull, you need that cantilever just to put the scope in the same relative position as the scope on the Ruger American without cantilever.

[@FawaazJ]

Hi Vortex Team. I purchased a Tikka T3X CTR that comes with 0MOA rail standard. Planning to purchase the Strike Eagle 5-25x56 scope. Which rings must I get to clear the ocular lens bell? I’m keeping the 0MOA standard rail for now as I don’t plan to shoot further than 1000m for now.

[@jieevo]

Looking to mount my new Razer HD 2 on my AR308 , what's a good mount?

[@mainenorthwoodshunter3265]

I have a 7mm rem mag I am putting together. It has a muzzle break. Does it matter if I use steel or aluminum for my Picatini rail and rings or not?

[@justinhough3169]

@Vortex Optics What cantilever would you recommend for a Rise Armament 1121XR 6.5 Creedmoor, topped with a Vortex Viper PST 6-24x50 riflescope? What are the main differences between each of the cantilever mount options? And lastly, I might want to get into long range shooting sometime in the future, but do I really need to spend the extra $$$ on getting a precision cantilever? Or could a Sport/Pro cantilever be steady, sufficient, or reliable enough for the lower kick of a 6.5? (I also plan to use this gun hunting as well, so I prefer to keep it on the lighter side when possible.)

[@VortexOpticsUSA]

The pro cantilever would be perfect. All of them are plenty reliable and steady for a 6.5, the main thing you get as you upgrade from sport to pro to precision is the overall quality and precision tolerances that go into making the mounts themselves. For someone looking for the ultimate in precision machined rings that are perfectly matched to one another, the precision cantilever mount can't be beaten. That build quality does help it in reliability on heavy recoiling guns, or in harsh uses, but it's unlikely you'll be testing those limits with what you describe. The Pro is a great choice as well, plenty durable and reliable and at about half the cost. Many of us here use all three depending on the situation. For your particular application, the Pro seems perfect.

[@aiyappaify]

What mount and scope would you suggest for a BSA sportsman 1 with no Dovetail groove on the barrel?

[@louispratti8724]

Hi i just got a vortex viper hst. What rings should i use to mate it to a rem. 700 sps .223?

[@angelalane3284]

What mount and rings would you recommend for a Vortex 6x24x50 on a browning 30-06

[@550grizzly11]

looking a purchasing vortex scope for predator hunting which scope do u recommend

[@garymcadams1]

Great video. Very informative. I just bought a Remington 700 26 inch barrel in 300 Win Mag. I have little to no long distance shooting experience but that is the goal behind buying this rifle. I would start with just long distance targets until I got confident enough to hunt long distance without risk of injuring an animal that I do not kill. I am thinking I want a scope with a high magnification around 20 but anything up to 25+ would work and no less than 16 power. I would like to keep the price around $700 for the scope, rings and mounting plate but willing to go a little higher if there is a scope that will better serve my purpose. Any set up(s) you can suggest? I see mounting plates saying 0 MOA, 2 MOA, 4 MOA. I understand MOA when adjusting my scope when sighting my rifle in but not on the mounting plate. What is the difference between the 0, 2, 4 MOA plates?

[@judgegarry]

In case you didn't figure it out, or to inform viewers: A 20 MOA base is generally used for shooting 500 - 1000 + yards depending on the scope and caliber (At 100 yards, one MOA is about 1" [slightly more] )The scope mount cants downward at 20 MOA, which will allow you to zero your gun at a greater distance. This prevents your scope from reaching the limit of elevation adjustment. I would recommend zeroing a rifle with a 20 MOA rail at 200 yards Good luck

[@dock9626]

Excellent video! My current dilemma: A Henry All-Weather 30-30 with Picatinny rail. Yes, a lever gun. how to mount a 30mm scope while being able to still access the hammer....??

[@Skillz45]

Hi, what would you recommend for the best mount for the vortex 3-9x40 scope

[@0709cop]

Accuracy arctic warfare with VORTEX HST 6-24x50 scope..which height should i choose??vortex rings...i mean..thanks!!awesome optics..keep up!!in mm please :-)

[@haydenspits4740]

Hi Guys, I just purchased the Vortex Viper PST Gen II 5-25 x 50 and plan to mount it on my Tikka T3x TAC A1. Can you let me know what high quality set of rings would best suit this application and give me the most out of the scope? Note: I don’t intend to shoot past 1000yrds. P.S keep up the great work, these vlogs are extremely informative 👍🏻

[@VortexOpticsUSA]

Thanks for the feedback and good words - we really appreciate it. The best mount for that scope/gun combo is the Precision Matched Rings in the 1.45" height to clear the hand guard. You can find them at: vortexoptics.com/product/vortex-precision-matched-rings-30mm-riflescope-145

[@tdog7726]

I have a .308 Ruger American with a Vortex Viper 6.5-20x50 with a 30mm main tube. What rings and mounts should i install? I currently have the Vortex Tactical 30mm High Rings but it seems that the scope is sitting way to high above the barrel. I would prefer installing a single uni base to help eliminate the need to properly balance/position the 2 sets of rings on the scope.

[@ConditionZero76]

medium rings, High rings are to tall on a RAR with 50mm bell

[@Exit26B]

I purchased a DBK-RIM 2-7 x35 Rimfire V-plex Vortex Diamondback riflescope. I would like to mount it on to my .22 bolt action Marlin Glenfield Model 25. What rings would you suggest?

[@josephkuhlman654]

Great vid...big fan of Vortex...missed the live feed for a question. If I have a Remington 700 chambered in 300 winmag and planning for the a scope with a 30mm tube and 50mm objective (6-24x50 HS-T or HS LR). What is the lowest rings I can get that will fit and give sufficient room between the barrel and objective. Specifically it is the Remington 700 5r G2 rifle in 300 winmag. Thanks.

[@VortexOpticsUSA]

+VikingSenso - I'd recommend rings in a "Low" height if you're running a picatinny base, or "Medium" for a set of weaver bases! -RJ ([e-mail])

[@tannerbingham5177]

@@VortexOpticsUSA - What do you consider "low" height? I will be running a 20 MOA picatinny base on my Christensen Ridgeline with the Viper PST Gen II 5-25x50. Would you recommend the 0.87 or 0.97 Vortex Match Rings?

[@VortexOpticsUSA]

@@tannerbingham5177 - .87" would be considered "low" while .97" would be "medium." With the 50mm objective bell on your scope, you'll want a set of high 1.26" PMR rings.

[@sciencestudent88]

For some odd reason most of my scopes are vortex...i blame meat eater!

[@kaydubzz]

sciencestudent88 same, that show is really good!

[@squidvis]

Damn meat eater and demolition ranch!

[@Kaotix_music]

yea - watching vortex podcast too much along with meat eater i found myself in a bass pro shop today wanting a new scope and i went straight to the vortex section. Long story short i own a vortex now! i 100 percent do not regret my purchase

[@dennislydon-dt4mq]

Will the fixed front site show in 6-18x44 on a AR-15 carbine

[@gregmoore8157]

I just purchased an Anschutz MSR and am looking at a Vortex Venom. I ordered the Anschutz 1761 scope base from Area419. Guidance for rings ?

[@wayneoliver5987]

what length cantilever unimoint foe a tikka t3x tac a16.5 Creedmoor with a razor 4.5-27x56?

[@hi-techredneck8076]

Kind of late to the party but anyway, I've got a savage access to precision rifle. What ring height would you suggest? I have several options at my house. Just curious thanks, Jerry.

[@MrPatrickjsmithsr]

I recently purchased a vortex diamondback rifle scope 6x24-50 30 mm tube mounting to a ruger sfar rifle ring height please ideas tips pictanny rail

[@CD-lw6fl]

Purchased a Tikka t3x Varmint that still needs to be picked up. Was wondering if the PMR at 1.45 will be correct with using your Vortex Strike Eagle 5x25x56? Curious about the clearance of objective lens with a defender flip cap?

[@VortexOpticsUSA]

Thanks for reaching out! The 1.45" inch height might be a bit too high for that platform. The 1.1" inch height will be much more comfortable.

[@MD-xi5vd]

I need help understanding what the mount on the receiver of a Ruger All-Weather 77/22 is called. Is it a dovetail? It doesn't really look like one.

[@charlesludwig9173]

The most typical and problematic concern is a scope height which will support a muscularly relaxed stockweld where the entire weight of head can rest on the stock while yielding perfect sight alignment. Unless this condition is achieved consistent sight alignment will not be possible resulting in angular error which increases with distance.

[@armz52]

What height rings would you recommend for a Vortex Diamondback 4-12x40 mounted on a Ruger American Rimfire? Rifle has a 0 MOA weaver style rail.

[@VortexOpticsUSA]

Anthony - you are going to want to go with Medium Height Hunter rings for that weaver rail! -Rachel, [e-mail]

[@frankopanklaric]

Can you tell me about the glue that comes with your mounts? Why is it red eventhough people advise me against red loctite? Is it red loctite?

[@martinesparza8808]

I'm working on putting together a 300 blackout ar, what would be the best scope rings to use. I have a vortex diamondback scope that I was planing to use for this.

[@VortexOpticsUSA]

Hey Martin - thanks for considering Vortex in your search for a new scope! How far do you plan on shooting? Do you have a specific budget you're trying to stay within? Please let us know and we'll gladly help you find a good match.

[@jimjandrew7111]

What height scope rings would I need for a Viper PA 6-20x50 on a Win M70 LA? I'm leaning toward high, as I have I'm currently using a one piece Game Reaper medium height with a Crossfire II 3-9x50, and the scope barely clears the barrel. To add, I'm looking to use the Vortex Pro Series rings.

[@VortexOpticsUSA]

Hey Jim - thanks for reaching out! For that setup, we would recommend going with a 1-piece Picatinny rail and a set of the 30 mm Pro Series Rings - Medium (PR30-M) for that setup.

[@megan6228]

Sir who did that cerekote job on that ruger american predator?? That looks amazing!!

[@VortexOpticsUSA]

Somebody fairly local out of Minnesota - kind of a small hobby shop to be honest. Jim See at Elite Accuracy does amazing cerakote work

[@Desiel76]

I'm getting a Mossberg Patriot Predator 6.5 Creedmoor and a Vortex Crossfire II 4-12x50 Adjustable Objective Rifle Scope. What would be the preferred height from the Keystone Scope rings- 1.275, .990 or .850? I'm really looking at getting this right the first time without getting the wrong rings. Thanks!

[@VortexOpticsUSA]

It would depend on how they do their measurements and what type of rail system you are using. If they measure from the top of the rail to the center of the ring the .990 should work fine.

[@julianmurgia7741]

Which size ring does the new GEN 3 take?

[@andrewjohnson9296]

have weatherby vanguard S2 rifle. rail 20 moa picatinny. scope : plan on vortex pst with 50mm lens. what best rings to get: height? qd? cantiliver?? target shooter, not hunter

[@30-06]

andrew johnson Almost same set up, waiting for pst Gen2 delivery. What did you end up using? How do you like the set up?

[@MancelTownsend-jg1xq]

What size rings was that u had on the Ruger American?

[@BowhuntingAfrica]

Do vortex make rings to fit CZ 550 rifles? I have a CZ 550 LUX in 300 Win Mag and I ordered a Vortex Viper HS 4-16X50. I am looking at Warne CZ rings but I’m not sure if I should get medium or high. I would like to be as low as possible as I love the fit of the Lux (hogs back) stock.

[@VortexOpticsUSA]

We do not. You should be good to go with the Medium height rings from Warne though.

[@1outdoortradition137]

Vortex, this video was super helpful and brought up a question at the same time (hopefully it's answered here because I don't have a FB). I recently bought my first scope, Vortex Crossfire II 4-12x44, that I'm looking to mount on my Savage Axis .30-06. What recommendation would Vortex have on which rings to purchase for this combination?

[@dricul]

1OutdoorTradition Not a Vortex product but I have used and am very happy with DNZ Game Reaper on a Savage model 10. www.dnzproducts.com/product/game-reaper-savage-2/

[@VortexOpticsUSA]

+1OutdoorTradition - I'd run our Pro-Series/Viper rings in a "medium" Height profile. I think this would work well! -RJ ([e-mail])

[@1outdoortradition137]

Would the Pro Series/Viper rings in a "medium" height fit a weaver mount for the same Savage Axis .30-06? Or is a Picatinny recommended instead?

[@VortexOpticsUSA]

Absolutely!

[@Matt-dc8lp]

Will the vortex pro series rings handle a 50 bmg?

[@dustindickey2551]

Bought a Savage Axis 6.5 creedmoor that came with a Weaver scope. The bolt barely clears the scope flip covers I put on the scope. Would putting a taller scope mount help that?

[@caKiTKaT]

Dustin Dickey yes

[@humbleoutdoorsman6817]

What rings do you recommend on American predotor using the crossfire II what brand and type that will fit the rail

[@VortexOpticsUSA]

Hey there! Assuming you've got a 1-inch tube diameter, the Pro 1-Inch Rings would be a really good fit for your rifle/scope combo! You can check them out right here: vortexoptics.com/product/vortex-pro-1-inch-riflescope-rings-low-height

[@Fleatakeoutthezippo]

I am getting ready to purchase a viper pst genII 2x10x32 for my new ar ten, what cantilever should I get with it?

[@VortexOpticsUSA]

+Patrick "Flea7.62x51" Felice - I'd recommend our Precision Extended Cantilever mount, but if you need a QR mount, check out our Precision QR mount. Both in 30mm, both would work Awesome! -RJ ([e-mail])

[@larrynolte9611]

Building a 10/22 on a Titan stock using an 18” barrel the scope I have for it is a vortex 4-12x40 which rings or a mount

[@VortexOpticsUSA]

Medium height pro 1 inch rings will do lovely atop a pic rail if possible

[@sambarton202]

I have mossberg 646 xps 22lr can't find mounts. Help please

[@Doc.Holiday]

What torque setting do you recommend on your anti-cant bubble level? Do you recommend thread locker on that? I know you do not on rings.

[@VortexOpticsUSA]

No thread locker necessary there either and the bubble level doesn't need to be crazy tight - 15 inch pounds max should do it just fine.

[@kuihekili82]

Just bought your guys diamondback tactical scope. What scope height would you recommend for a ruger m77 .270 win?

[@VortexOpticsUSA]

The Ruger mount is a bit funky and exclusive to the M77, so you'll need to use their rings (30mm - medium height). You could also go to a weigatinny rail (if you insisted on using a more precision ring set, like the Precision Matched Rings in our line). If you chose the latter, we'd recommend a set of our medium height 30mm Pro Rings which you can find here: vortexoptics.com/product/vortex-pro-series-30mm-riflescope-rings-medium-height

[@joehuff4025]

My tactical guns I like the scope up off the gun but my precision guns I like the scope down tight. I own mounts of just about every height.

[@lgaristolgaristo88]

Will a Vortex 4-12 50 Crossfire II fit on a Ruger American 22 target rifle? What type and size rings would I need?

[@VortexOpticsUSA]

Yes it should fit fine with a set of medium height rings

[@buckrodgers5830]

When mounting a Strike Eagle 1-8 on a flat top modular sporting rifle, would you recommend a cantilever mount with 0 MOA or 20 MOA?

[@VortexOpticsUSA]

It really depends on how far you're planning to shoot. For most practical shooting applications with an AR chambered in 5.56, you won't need a 20 MOA base to shoot out to 600 yards. If you plan on shooting super long range, you're probably going to want to go to a higher magnified optic. Let us know what kind of shooting you'll be doing and we'll be able to help recommend what kind of mounting solution is best for you.

[@buckrodgers5830]

@@VortexOpticsUSA Thank you for the quick response! First time putting a powered optic on a modular sporting rifle, and was concerned with height over bore effecting the scopes elevation travel.

[@michaelrourke9830]

What rings would you recommend for a Winchester Apex .50 caliber muzzleloader with a Vortex Crossfire 3-9x40 scope

[@VortexOpticsUSA]

If you have Weaver bases or a Picatinny rail on your muzzleloader the 1" Pro Series Rings - Medium (PR1-M) would be great for your setup!

[@ryonreginato6242]

Are the recoil lugs round bar or square bar? on the viper vertically split rings VPR-30L. Thanks

[@VortexOpticsUSA]

Those have rounded recoil lugs.

[@mikejessmax]

Tikka T3 .243, just ordered a Vortex PST 4x24 50. What size of scope rings would you recommend?

[@VortexOpticsUSA]

Medium height 30mm rings should do perfect.

[@ramonayala7151]

I have a remingto 700 long range rifle 30.06 bull barrel. What picatinny you recommend for me I’m using a vortex scope.6 24 50

[@VortexOpticsUSA]

Check out our friends at Evolution Gun Works (EGW) for a picatinny rail - if you give them a call, they'll be able to get you the exact rail that you need. Then a set of medium height rings will do the trick nicely! Hope this helps

[@Birdog62]

I'm wanting to mount a vortex hog hunter 3x12x56mm scope on an AR. Will the cantilever mount be high enough to clear the objective on the rail?

[@VortexOpticsUSA]

The cantilever should just clear it in 99% of applications unless yours has an unusually tall handguard or something. Thanks!

[@SailTheSaddle]

I am mounting my Viper PST gen 2 5-25x50 FFP to an ar10 with 20moa built in to the upper receiver rail. I need to know what the minimum centerline height I would need to ensure clearance with the standard full length pic handguard from the objective bell.

[@VortexOpticsUSA]

For an AR platform you would want to go with a cantilever style mount that would get you up to the proper height and offset the optic enough to where you could get the proper eye relief. Something like our 30 mm Pro Extended Cantilever Mount would be a great option for that setup.

[@TheDjw207]

I bought the crossfire2 for my Remington 700. I was going to get vortex pro series scope rings ,but I don't know what one will fit best. Can you please help?

[@VortexOpticsUSA]

Hey David - thanks for reaching out! Which Crossfire II did you get? Also, what kind of base is on your Remington 700 and what caliber is it?

[@nicholassellier547]

Iam in my 60s, so my eyes aren't what they used to be. So i need to put a scope on my Browning BL .22 .What scope and scope mount would you advise me to put... Thanks for any suggestions.

[@VortexOpticsUSA]

On a gun like that you'll want something with a nice, forgiving eyebox and good eye relief to make up for the fact that it will probably have to sit up a bit higher than is ideal just due to the design of the receiver and the stock of the rifle, so we'd recommend checking out something like our Crossfire II 2-7x32 Rimfire, or the Viper HS 2.5-10x44, the Viper being the better of the two by quite a great deal, but also a fair bit more expensive.

[@JohnRIvory]

What's disadvantage of mounting my viper ps gen 2 on Bergara hmr. using Tally Remington 700 rings directly into drilled tapped receiver.

[@VortexOpticsUSA]

You would obviously save weight going that route. The biggest disadvantage to going with rings that go directly to the receiver is you lose the flexibility of setting the proper eye relief. With a 1-piece rail and rings, you can move the rings on the rail and slide the scope in the rings as needed to find the proper eye relief and keep the rings centered on the scope tube body. With 2 rings that attach directly to the receiver, the only adjustment you have is sliding the scope forward or aft.

[@weiss1985]

i have a 4x16x50mm putting it on my ACR want to know what will clear the rail and not have the scope hit it? Vortex® Cantilever Mount 30mm looking at that but need a professional opion

[@VortexOpticsUSA]

Yes - with that cantilever mount it will clear just fine! - Jimmy H [e-mail]

[@twotallable]

From 50 yards on my bolt action marlin 22. Zeroes great! Next I’ll zero for 100 yards. Good value.