To show how to rebuild a 113-905-205T VW Distributor
Пікірлер: 23
@allmyownvideo5 жыл бұрын
Hi David , thanks for the video , i will be rebuilding mine tomorrow,with this video playing along side as a guide.
@steelavocado1 Жыл бұрын
about to dive into mine! couldnt figure out how to press out that little timing retainer thing at the bottom but I guess I now know! I just got a 1300 for 200 bucks and will be building it to a 15 or 1600 single port! Cant wait.
@FixinBugsNStuff Жыл бұрын
Very cool.
@danielhurt29542 жыл бұрын
Great video helped me with my 111-905-205T think that's the UK number for this dizzy 👍🏻
@FixinBugsNStuff2 жыл бұрын
I used to do a lot of these but, now there is not much demand for them.
@ocavant Жыл бұрын
The “plugs” as you called them are typically vents so air can circulate inside the unit. This is important to mitigate any potential gasoline vapor getting inside and igniting due to the open spark of the points.
@tomgcolemangoplayer9 ай бұрын
One of my shims has worn through, where can I buy new shims? I'm restoring a 009
@mra29575 жыл бұрын
David, great video 2 questions, what is your source for the fiber, shims and oil felt? What tools did you use for polishing? The final results are awesome.
@knockout8184 жыл бұрын
Mra1507 Mra1507 call century distributors in Visalia,California. Google it for contact info.
@FixinBugsNStuff3 жыл бұрын
I got the distributor parts from here: www.vwnos.com/ I just used a chrome polish on the case.
@jamesputich4 жыл бұрын
is that a craftsman versa track rail you have hanging under you cabinet? if so, where did you get those small bins that you have hanging on it? I haven't seen those in any store and would like to add some to my wall
@FixinBugsNStuff3 жыл бұрын
Yes. The small bins are from the gladiator series.
@redram6462 жыл бұрын
I have a 73 beetle and when I take the cap off I can push down on the rotor a bit and it springs back up. Are they spring loaded ?
@FixinBugsNStuff2 жыл бұрын
The rotor itself has a spring tab to hold it in place. If the rotor is moving up and down significantly, then you may need a rebuild.
@HnsclmnsАй бұрын
How did you attach the ground wire. Easy to solder? Any tips?
@FixinBugsNStuffАй бұрын
Easy to solder, not too bad.
@HnsclmnsАй бұрын
The solder won’t stick. New groundwire keeps coming loopse.
@FixinBugsNStuffАй бұрын
Clean the area very well and then solder.
@Musickfreakbrown5 жыл бұрын
Would this distributor be good for a 1641 with a 34 pict 3?
@FixinBugsNStuff5 жыл бұрын
This would not work with a 1641 because of the vacuum requirement.
@jonl88765 жыл бұрын
Brown, you’re looking for a 0231-170-034 Bosch distributor.
@mastermatt2894 жыл бұрын
Where do you get your distributor fiber shims from?