This is so useful thank you. Its also quite relaxing watching you do this
@Instone09ine Жыл бұрын
Thanks for the feedback Kelly 👍
@wonkydogleathercraft669820 күн бұрын
Always makes me smile when paper hanging tutorials use vinyl paper because its easier than anything else!
@ronfairfieldmirrorartist4541 Жыл бұрын
By far the best tutorial on here, no endless chat just solid technique that works, thanks for making my wallpapering even more enjoyable.
@Instone09ine Жыл бұрын
Thank you for the kind comment Ron much appreciated😀
@ay985911 ай бұрын
My man showed everything perfectly; the camera angle as well as the technique! Very wel done, thanks a lot!
@Instone09ine11 ай бұрын
Thank you so much! This gold star is for you 👉 ⭐️
@motormouthalmighty4 ай бұрын
that was utter precision,pinpoint crystal clear football!.an absolute Wembley masterclass!that's how the British empire should be being run!outstanding work!
@Instone09ine3 ай бұрын
Thanks again for another lovely comment 😀
@HawthorneLivia-h5nАй бұрын
Short and to the point, great!
@Instone09ineАй бұрын
Thank you for your feedback👍
@martinosicka70512 жыл бұрын
good job. interesting to see you use caulk as an adhesive.
@Instone09ine2 жыл бұрын
Thank you Martin😊
@ClareCelticHiker Жыл бұрын
I enjoyed watching. Nice job 👍
@Instone09ine Жыл бұрын
Thank you Clare 😀
@joaobrunobeilner5 ай бұрын
Exelente trabajo! ¿Que cola es esa que has usado para las esquinas?
@Instone09ine5 ай бұрын
Muchas gracias. Las esquinas se pegaron con masilla acrílica ya que es un buen adhesivo.
@Danny-yb9ms10 күн бұрын
Do you find putting paste on with a roller better than with a brush? ive only ever used a brush. also whats the best way to get a straight line from the celing down to the skirting to the side of a window. string and a weight on the end? i never trust spriit levels for 100% accuracy. thanks!
@Instone09ine9 күн бұрын
Hi Danny i do find it easier when hanging using ready mixed adhesive on non woven type wallcoverings which is pretty much most of the time! Occasionaly i use a laser line but mostly spirit levels having said that i do have a lovely old plumb bob for when i dont have room to use a level, say above kitchen units or over door frames! 😀
@波波盡9 ай бұрын
Good tutorial for me👍🙏thx
@Instone09ine9 ай бұрын
Thanks for the feedback 😀
@CasperLD7 ай бұрын
Nice job. Looks great.
@Instone09ine7 ай бұрын
Thank you very much 👍
@markcrotty59102 жыл бұрын
Brilliant job
@Instone09ine2 жыл бұрын
Thanks Mark 👍
@tracyholmes96059 ай бұрын
That was great. Thank you
@Instone09ine9 ай бұрын
Thank you 👍
@ronnieball34567 ай бұрын
Very useful. Thank you
@Instone09ine7 ай бұрын
Thank you Ronnie 😀
@IsaacJohnsonCompaniesLLC-vl3qt5 ай бұрын
Thank you for the video.
@Instone09ine5 ай бұрын
Thank you 👈😀👍
@serenamccabe78212 жыл бұрын
Looks good
@Instone09ine2 жыл бұрын
Thanks Serena 😀
@drdecorator95322 жыл бұрын
I enjoyed the video, why did you use caulk?
@Instone09ine2 жыл бұрын
Caulk is an excellent adhesive for vinyl wallpaper also great for overlaps on corners 👍
@drdecorator95322 жыл бұрын
@@Instone09ine interesting, I shall try that.
@Instone09ine2 жыл бұрын
@@drdecorator9532 Thank you for stopping by😀
@ChrisSmith-tq9un Жыл бұрын
When using paste can you paste the wall instead of the paper?
@Instone09ine Жыл бұрын
You can as long as it’s paste the wall paper 👍
@interioraccents22422 жыл бұрын
What brand/type adhesive did you use? That’s a beautiful wallpaper
@Instone09ine2 жыл бұрын
Hi it's a ready mixed paste by Mangers.
@williams.porter61825 ай бұрын
If you had installed the first strip far enough to the right to wrap inside the widow return you could have saved your self a lot of work.
@sebeden122 ай бұрын
but no telling how the rest of the room laid out that might have been lesser of the 2 evils.
@johnboyle27478 ай бұрын
Nice video thanks
@Instone09ine8 ай бұрын
Thank you John .
@CARLIN47372 жыл бұрын
Im also a pro dec. Nice job, Could watch these all day.
@Instone09ine2 жыл бұрын
Hi Brother thanks for the feedback 👍
@ProfessionalPainterDecorator Жыл бұрын
I think it's time for a laser liner now ;) hope you're well, HNY.
@Instone09ine Жыл бұрын
I have a cat laser ! Will that work ? 😂
@bumble1612 Жыл бұрын
I've been a time served Decorator for 40+ years now. Just no !
@2010gtoner2 жыл бұрын
good vid, thanks
@Instone09ine2 жыл бұрын
Thanks Geoff😊
@frankmc3242 жыл бұрын
That's not the way I see spencer colgan do it in usa ,I am glad to see a European do it the same way I do it 😀
@ProfessionalPainterDecorator2 жыл бұрын
The less cuts the better. Spencer goes into doing more splices.
@marvtintv2301 Жыл бұрын
Spencer wastes lots of paper and takes too long.he is good though
@williams.porter61825 ай бұрын
Spencer Colgan is not one that I would suggest that you get pointers from. Ever watch him try to paper around a window?
@johnferns83312 ай бұрын
Very good amateur
@alimo36835 ай бұрын
👍👍
@brianismael4553 Жыл бұрын
Overall not bad your method for papering the window is wrong the overlap section will be visible and is not necessary,once you see how it's done right you'll be fine.
@sebeden122 ай бұрын
they might be getting drapes that would cover it but yeah I agree I typically only splice over wrapped windows
@stephenmearing5872 жыл бұрын
That's not right never overlap should be spliced together how you would do a wide vinyl muraspec type paper this is not the way
@Sam-gw5pl2 жыл бұрын
You mean like a mitre join, overlap, cut thru the middle, remove top and bottom overlaps to leave a butt join?
@stephenmearing5872 жыл бұрын
@@Sam-gw5pl yes exactly that no over laps
@justabout6144 Жыл бұрын
This is a vinyl that you butt joint, around window reveals option to overlap or splice the small cuts, all depends on the decorator 👍
@Chalkster1 Жыл бұрын
Don't know bout this method doh !
@TheLeeattwood Жыл бұрын
👍🏻👏🏻
@Instone09ine Жыл бұрын
cheers Lee😀
@kevinroberts805910 ай бұрын
I'm no professional but I've learnt how to get the perfect match round a window, this us not it
@tigertay108 ай бұрын
How come? I thought it looked better than most of these videos I’ve seen on here
@davidhill4081Ай бұрын
Dog ruff decorating I have ever seen
@Instone09ineАй бұрын
@@davidhill4081 thank you 👈😀
@jamiegraham43892 жыл бұрын
Why not splice it. If it was thick vinyl your method wouldn't work. Interesting seeing the caulk in use though 👍