Warne Tactical Baseplates | Installation, +3 /+5 Extension for Glock & SIG

[@Aviation_Professional]

When removing how do you slide past those locking nubs on the side of the warne ext? The seem to lock it in place and I don't want to destroy those locking tabs?

[@classicmicrosystems]

What's the removal process? With the spring down in the new base plate how can it be slide off without catching the spring? Do you have to somehow compress the spring again as it slides off? Would be nice to include that in the video.

[@johnmart127]

Got some on clearance at my lgs this past weekend. Haven’t shot the gun with new base plates/extensions.

[@richardguajardo2393]

Do you offer a mag extender the a 10mm Glock magazines?

[@Skankhunt556]

The spring looses tension when loading makes all the ammo fall out 45 bucks down the drain

[@RubiconTSL]

Question, at 1:54 you said “that’s a +2 for the Glock 19”, but on the title of the video it says +3, so what capacity do they really add for the 19 and 17? +2 or +3 ?? Also, at 4:02 you said that the Glock 17 magazine went “from 17 to 23rds”, but that baseplate it’s a +5, according to the title and the specs on the website. 17 + 5 = 22. The math does not add up. 😬

[@evilrevolations]

I was thinking exactly the same thing....

[@jth_printed_designs]

It's +3 for 9mm, +2 for 40 cal

[@damiion666]

Can we see how it looks on the gun??

[@patrickhenry144]

I purchased 3 of the +5 for the G17 and can only fit 19 rounds in all the mags. removed and reinstalled can not find any issues. So I am only +2 on a +5. I think the issue is the new mag spring is to large. Any one same issue? Thanks

[@its_fish5274]

Are you using a mag loader to assist you? It’s pretty damn tight and it took me a couple times to get 22 rounds in it. Now they are fine

[@patrickhenry144]

@@its_fish5274 I am using a loader. Really hard stop @ 19. I am going to measure the spring to see how much more it is over glock factory.

[@braxtondarby6196]

Make sure your screw isn’t to tight it will in stop spring from going doen

[@specknred19magee9]

I had the same issue as Patrick. Used the factory springs and it loaded fine. Just like he did in the beginning of the video

[@GuacIsExtra99]

Does anybody have experience using these with the Dawson ice magwell? Thanks

[@wyattcoover689]

Just curious how do you remove these?

[@koruoverland]

Great video, well done!

[@polanco760]

Will not work on magpul glock 19

[@DesertShooter762]

I installed the plus 5 on my Glock 17 mags but they only are holding plus 4 not 5. Why is that?

[@Aliasrip]

Might just have to run the magazine a little and help the tension on the spring

[@fernandonavarro2135]

I installed the plus 3 on my Glock 19 gen 5 and the slide will not slide back after the last round Im guessing the base plate is so heavy, I have to push the base plate for the slide can lock back

[@damercerterker8176]

Did you replace it with +3 mag springs?

[@fernandonavarro2135]

@@damercerterker8176 that’s what I was thinking, but I was told it used the oem spring

[@damercerterker8176]

@@fernandonavarro2135 I had issues with buying TTI baseplates from people and being told it “used the oe spring” it was a +5 😂

[@mruizstgo]

Your website is really hard to fallow. Im looking for the mag extension for my sig p226. Can you help me? Thanks

[@VanceOutdoors]

Hey Manuel. At this time, WARNE does not offer a magazine extension for the P226.

[@GraffitiCutz]

Do these work for sd9