Was Getting a Free Fairlane 500 Worth It?

[@rickm5806]

She really did great!

[@electricguysvcs]

LOL - I saw that father tension as you were teaching her shifting. Good experience for her. Smart man - stay on a straight road

[@Xthreadgarage]

My brain: “The camera is on, the camera is on, the camera is on….” 😆

[@jans53chevrolettruckbuild29]

Here’s a trick for changing the oil without a mess, put your shop vac hose in the oil fill hole in the valve cover and turn on. Then get under and remove the oil drain plug with the vac on and not one drop of oil will come out until you turn the vac off. Works great for installing a new crush washer when the drain plug leaks.

[@allan-mw7op]

Another fun video ! You are a great dad ,keep the videos coming..😄🙏

[@clydepodvin5026]

They say a clean work space is a safe work space. Great video.

[@amerritt261]

We pack cedar shavings into old nylons and stuff them into the hiding spots in the cars. Under the dash , and seats and the trunk and under the hood around the wires. Rodents are allergic to it.

[@Xthreadgarage]

Great idea. Thanks.

[@molarguy]

Power valve on the side of the carburetor will leak put duct tape on it(temp fix) and it will act as bladder. Holley Rebuild kit just use screw in valve. Put finger on opening and see if there is idle changes to check. I had 1 same year with blue interior. 17 mpg highway or city(4.11 closed rear) enjoy excellent car no PCV just tube hanging down on 1 side.@@Xthreadgarage

[@TheLostWrenchGarage]

Great video guys!! She did really well for the first time diving a 3 on the tree!! I was waiting to hear the tires chirp when she gas it to much throttle!! Man that car is in awesome shape! Can't wait to see more on it. God Bless!

[@Xthreadgarage]

Thanks 👍

[@tectalabyss]

A bucket < Stiff straight wire, Pop bottle and peanut butter. then fill the bucket half full of water. No Mice. Just empty the bucket when needed.

[@davetackett922]

I had that car with a 260 V8. Loved it. Take care of that one.

[@janeames1513]

i couldn't help but laugh at the grabbing her arm when she was trying to go from first to reverse..been there had that done to me in a old 64 (i think)falcon...k8lynn, you will get the hang of it the one thing that stuck with me is out is faster..pull the shifter in for turtle and reverse and push it out for more speed..maybe i'm weird but that's what worked for me ,,went from driving a 3 on the tree to eventually driving a 13 speed freightliner though the country..

[@Xthreadgarage]

Thanks for the encouragement.

[@MarkGlidden-f6s]

Make sure vac hoose to dist advance 😢is good! I had 62 comet with broke hose and burnt hole thru piston back in 75.

[@andrewslagle1974]

Yoi will have great memories with that car .I had a black 1965 ford fairlane sports coupe 289 /4 bbl 4 speed it was a great cat 1

[@billgaines8207]

That's an awesome Ford Fairlane that car is the same year I was born I would love to have a car the same age as me this was an awesome video showing your princess how to drive a 3 on the tree

[@johnnyfontana9058]

waiting on yall fix up the 41 ford truck that's for Catlin

[@Xthreadgarage]

We promise it’s coming. Hang in there. Thanks for watching.

[@santostrevino7338]

Nice car great job driving!

[@Xthreadgarage]

Thank you 👍

[@alynwilson5694]

Great video!

[@Xthreadgarage]

Thanks!

[@roberthirshfield3571]

Please please put a jack stand under that car unless I can’t see it

[@kevinherbert7564]

An other awesome video your biggest fan

[@Xthreadgarage]

Thanks.

[@kevinherbert7564]

Your welcome

[@ELNomad55]

Why are the dogs in the kennel?

[@Xthreadgarage]

It has been raining for weeks here. They have a doggy door that leads to a large backyard. It’s just wet and muddy.

[@briansmith9852]

105 hp almost enough to pull the skin off a rice pudding 😅

[@Xthreadgarage]

😆 nice.

[@jerrygaynor4384]

She really did good, until the old lady and dog threw her off. Really nice car, and boy I know your kicking you self for getting rid of the Lincoln, but I under stand why,

[@EricBell-xg4ur]

I know this is an 6 MTH old vid., but you need to be careful with those plastic seat covers. They melt in the heat and stick to the fabric on the seats. NOT GOOD!

[@Xthreadgarage]

Those plastic seat covers have been on those seats since 1962.

[@mikehunt1418]

Let Me correct You..."During The SCAMDEMIC"

[@jans53chevrolettruckbuild29]

Here’s a trick for changing the oil without a mess, put your shop vac hose in the oil fill hole in the valve cover and turn on. Then get under and remove the oil drain plug with the vac on and not one drop of oil will come out until you turn the vac off. Works great for installing a new crush washer when the drain plug leaks.