Watch This Before Using A Jack On Your Dodge Charger or Challenger *MUST SEE*

[@Hemifam]

Shop Hemifam decals and products 🛒 -> www.etsy.com/shop/Hemifam

[@wb4514]

Be nice if you showed us how to get the jack pad and the pinch point tool under the car !

[@Luisquickwit]

Lol

[@cbones3346]

No Shit!!!

[@UND3N1ABLE2]

put the pinch point tool on the pinch weld then slide the jack underneath

[@wb4514]

Got it. Thanks

[@loveobviously]

Right all he did is run his mouth for 10mins

[@coolwrld302]

I had the "alternatives" for my Hellcat. Still managed to bend the pinch weld. If the adapter doesn't sit perfect in the jack cradle if you don't have the cradle insert like you have in your jack or if your jack doesn't move under the car as its getting lifted the pinch weld adapter will still bend the weld. For my next car I plan on using the TBA Machine Jack Pegs which are a more permanent solution. They make them where they attach to the sub frame in the front or you can even mount them on one of the three bolts by the pinch weld notch at the front of the side skirts. In the back they are a direct replacement for the plastic hockey pucks that are already there.

[@Hemifam]

Great info thanks for sharing brother!

[@zimtron9589]

Or just use the jack points that are indicated by a triangle on the frame.

[@lotus956]

You can also spray paint the arrows so you can find it fast.

[@PS5ProGaming23]

Where do you put the jack stands once car is jacked up

[@samhuntsman5067]

Where do the jack stands go?

[@BBDragon66]

You saved the pinchwelds on my 23 Challenger R/T. Thanks

[@bkny6798]

Hey man love your videos.. QUESTION?? Once you use the floor jack to lift the front end,, where/location do you put your jack stands so you can lower the car and remove the floor jack??? I want to leave it on the jack stands so i can work on brakes and shit

[@donnypritchett4675]

10 minutes and Still didn't even get to the point.

[@mrshaboom1]

will a block of wood work with the floor jack?

[@tonyrollman3991]

Glue some rubber pads on the bottom of the puck..jacks especially scissor jacks will slide off

[@michaela6147]

Best review on how to do this... Thanks👍

[@greenhornetkato4837]

What's the name of those, for your pinch wslls

[@markjpozorski9703]

Nice items, failed to demonstrate.

[@bota20]

Thx for the video.. I needed this video a week ago. I just had ordered some hard rubber ones couple bucks on Amazon. Yours are so much nicer.. Its freakn scary without them or wreaking my R/T Charger..

[@Hemifam]

Facts brother I needed these 5 years ago lmaoooo so much easier getting the car up and down now. 🙏🏼

[@NS3825]

I like that German cars have only one spot to put the jack. But also if you know where to put the jack your pinch welds should never get messed up like that

[@Hemifam]

Can't go wrong with German engineering. these cars are way too heavy to rely on a jack and pinch weld alone.

[@Scavenger1320]

Saw the same jack I have in the thumb and had to watch. I got the ZL1s, I agree they're pricey, I'll just say I wanted the "remove before flight" tag they have lol. Quick tip that I discovered, those pads slip perfectly onto the side edges of that jack and magnetize to it. That way they're always with the jack. That's where I keep mine.

[@Hemifam]

Oh yeh ZL1 makes amazing stuff I just couldn't bring myself to pay almost triple for what I paid for these. Great info thanks for sharing!

[@henryortiz4089]

What low profile Jack are u using

[@gregcamacho5857]

Hemifam good to see your back, keep up you amazing videos they have helped me alot.

[@Hemifam]

Thanks, will do! If my videos can help just one person then my job is done. Thank you for all your support!

[@Disorderinthacourt]

Glad your back man! Love your content

[@Hemifam]

Thanks brother feels good to have a camera in hand again. 🤙🏼

[@cocainehernandez919]

Have to be honest mine are crushed one all 4 sides I use a 4 point lift doesn’t really matter to me they still grip on just fine they get into my plastics on the side a little but never leave any visible damage

[@blchemi16]

Man where you been? We missed you.

[@Hemifam]

Thanks my man. Trying to get back into the groove. 😅

[@D2Joey]

Yeah I got this for my 2016 and they don’t magnetize to anything

[@jackblack6893]

Glad to see you back champ .....

[@Hemifam]

Thanks fam, I appreciate you.

[@TheGrimey1]

Great vid bro. Thank you.

[@thewickedscat4012]

Is this for challengers to?

[@Hemifam]

Oh yeh will work for Charger, Challenger even Durango’s. Any car with pinch welds this will work perfectly.

[@baldbeast37]

Where you get your torchwrech from?

[@Hemifam]

Here you go sir! 🛒-> amzn.to/3bPgp5c

[@baldbeast37]

@@Hemifam appreciate that!

[@jalhellcat1114]

So Glad you are back Brother! 🇺🇸😎🙆

[@Hemifam]

Much appreciated, miss ya my dude!

[@borri68]

that seems like a very very small surface area and they are aluminium to boot. seems like they would fold and and or tip over. id rather smash the pinch welds.

[@SKRFACE392]

GRACIAS VERY MUCHH HAVENT WENT UBDER MY CAR YET DUE TO WARRANANTY BUT WILL FOR SURE BE USING THIS INFOBAND WILL BE PURCHASING THABK U GRACIAS 💯💯💯💯💯💯💯💯💯💯💯💯💯

[@Hemifam]

My pleasure sir, enjoy that Scat Pack!

[@ClassicGBodyGarage]

Cool product but you didnt show them in use! 🤦‍♂️

[@leonardrice2830]

Hey! Good to see you!

[@Hemifam]

Thank you Leonard!

[@christerry9371]

@Hemifam What model jack is that?

[@hellcat7176]

Glad your back man it’s been so long keep up the hard work HemiFam 🙏🏼

[@Hemifam]

Thanks! Will do, feels great making content again.

[@MRNOONE-kf3nq]

Hey, i always watching your videos and i liked it, I've been watching every video in Channel and i interested of this, its awesome I had a quick question if you mind. You got 5.7 R/T if i tried it on 6.4 srt hellcat with corsa xtreme and performance and catless mid pipes its gonna be louder than 5.7? Which do you think is better corsa performance or xtreme or oem. I like to see your opinion.

[@hemipowered9264]

Great info man

[@Hemifam]

Glad it was helpful!

[@dillonwayee]

That mini split in the garage is badass! Wish mine could stay in heat/ac😂

[@SeriousLanes]

I have a set of those pucks ... they are life savers. I also left mines under my widebody when I was roaming in Mexico hahaha.

[@Hemifam]

Oh yeh these are great and easily forgotten I still can't believe they didn't fall off on the Durango from driving around.

[@jimiboynyc]

Thanks just ordered them .

[@Hemifam]

That is great news I hope you like it!

[@richieescobar6382]

Nice video bro

[@casheighty8]

They were stuck under the durango of the car

[@Suhhdew]

Zl1 addons has left the chat...

[@Hemifam]

Bruhhhh 💀 💀💀 they make amazing stuff but I just couldn’t spend almost triple for a pad. 😂😂

[@Browneye57]

10 minutes for a five-second message. Got it. The newest models don't even have room to slide the jack under, you have to drive up ramps first.

[@Hemifam]

Well, this is KZbin and not TikTok for F***s sake and if you know what you’re doing you can easily use a jack on any year Charger or Challenger even if it’s lowered on springs lmao. 🤷🏻‍♂️😂

[@Browneye57]

@@Hemifam - Yeah, I don't know what I'm doing. Dear lord. [rolls eyes] Smoke another doob man. LOL

[@Hemifam]

If you’re driving a car up ramps to get a jack under then YES! 🙃

[@mr.hammer7080]

Good video

[@tevinrichie4304]

No time for 10 min videos on this bro..

[@stainless1175able]

I'm sitting here waiting to see how in hell you're gonna get that jack under there. Nope. I've got ramps but the damn things get pushed by the air dam and every thing else. Frustrating.

[@bopbo8157]

That’s a nice ass charger⚠️

[@jaimefernandez7458]

If only someone made a permanent one that tucked in so u don't have to take them off. 😎😎😎😎

[@Hemifam]

I have seen some that bolt on but figured these were slightly easier option to use for the those weekend mods.

[@kirkkoblect5915]

Bro you didnt even jack it up .

[@DeathStroke220]

First

[@Hemifam]

Ayyeeeee my man!

[@MrMajinbu]

Jesus to much chatter get on with it

[@markblanchard2280]

Slow, rambling... and you need to have a specialty product to do it Could have said that in the time it took me to type this comment.

[@rellywhite6655]

Goofy

[@WitchesBrewMedia]

bad video

[@El_dino23]

Damm you talk so much! Get to the point already

[@Hemifam]

Don’t like it, don’t watch! 🖕🏼😂