Waxing By Machine | Super Fast and Great Shine

SHOP GYEON EVO CERAMIC COATINGS AND OTHER PRODUCTS HERE
tinyurl.com/2p...
----------------------------------------------------------------------------------------------------------
MY CAR DETAILING COURSE COURSE - CAR DETAILING FUNDAMENTALS - IS OUT NOW!!
The Forensic Detailing Channel special offer price is now £39*, (usually £249*) just follow the link below and use launch code: FORENSICDETAILING (if it doesn't embed automatically with the link).
This price gives you access for 60 days, but annual or lifetime purchases are also available.
*Prices may vary depending on which currency you use but discount percentages are the same. Discount will be applied automatically at checkout.
ioa.pxf.io/c/2...
----------------------------------------------------------------------------------------------------------
Become a Forensic Detailing Patreon for exclusive product reviews:
/ forensicdetailing
----------------------------------------------------------------------------------------------------------
Facebook: Forensic Detailing Channel
Instagram: @forensicdetailing
Twitter: forensicdetailing @rover8200
My Vlogging Camera
amzn.to/2YncEhP
My Main Camera
amzn.to/2V9puhN
Bargain £1 Mini Inpection Torches
amzn.to/2Hu9Eo9
Bargain Amazon Wash mitts
amzn.to/2Wp2xFg
Recomended Products
**TRY DISCOUNT CODE FORENSIC FOR 10%**
Pre-Wash Snow Foam
tinyurl.com/y8...
Shampoo
tinyurl.com/yb...
All Purpose Cleaner
tinyurl.com/yd...
Fallout remover
tinyurl.com/ya...
Tar and Panel Cleaner
tinyurl.com/y9...
Clay Bars
tinyurl.com/y7...
Clay Lube
tinyurl.com/yc...
Paste Wax
tinyurl.com/yc...
Drying Aid/QD Concentrate
tinyurl.com/ya...
Sealant
tinyurl.com/ya...
Detail Spray
tinyurl.com/yd...
Water Spot Remover
tinyurl.com/y9...
Tyre and Trim Dressing
tinyurl.com/yb...
Machine Polishers
tinyurl.com/yb...
Polishing Pads
tinyurl.com/y8...
Polishes
tinyurl.com/y9...
Panel Wipe
tinyurl.com/y8...
Microfiber Buffing cloths
tinyurl.com/ya...
Twisted loop Drying Towel
tinyurl.com/yb...
Mini Plush Drying Towels
tinyurl.com/yc...
Wash Mitts
tinyurl.com/y7...
#forensicdetailing #detailing

[@kevinb7058]

If the twisty think breaks on Gyeon wax just unscrew the end and you can push it up with a screwdriver. Happened to me yesterday 🤦🏻‍♂️🤣🤣

[@peterskellon9484]

This is my go to wax since it came out last year and you reviewed it Jon. Stunning hydrophobicity, not surprising really as although not the cheapest, Gyeon stuff is great in my opinion. I’ve applied it with my DA polisher since day 1 however I thought I’d apply it by hand with their applicator last week and it not only took a lot longer to do (which is a given I know lol) but wasn’t anywhere as even to apply and then to take off. The machine application is def the way forward, for me anyway 😂👍🏼🤩

[@dillinja187]

I agree, my go to wax too and Prep from Gyeon is as bad as fresh bread baking as in its smell "im addicted" 😁, also Gyeon wax not a total nightmare with the 🌞 like some waxes. Not having a garage it's a "needs must" situation

[@Bull1the1Great]

Would you be willing to try this test with a fusso coat? I think a 3 inch pad would fit in the lid . It's the wax that really doesn't forgive much when you overapply it and this machine method might fix that ...

[@phanter344]

The camera isn't going fuzzy or out of focus, but seems to be over exposing because of the dark panel. You could try dialling in a stop of under exposure and see if that gets you a better result? Great video as usual though!

[@frankgarber1051]

Phanter344 is right. Everything is in focus, but the exposure changes. Might try setting the exposure manually.

[@404notfound.....]

Gm jon, impressive results useing the flex polisher. I have to admit I wasn't expecting the removal to be that easy. 👍🏆 cheers from Canada. 🇨🇦

[@mireffafhassan1245]

Love the Gyeon wax crazy gloss and beading just keep it away from a strong shampoo Like feynlab Pure wash and should last a long time. fantastic smelling product and superb gloss and reflections

[@keithblacknell957]

I did exactly the same thing last week but left it to cure overnight, came off so easy and water behaviour is like nothing I've seen before.

[@jurajbela8298]

Great video...Gyeon Wax is genius ! I am surprised that this simple form of application have not come sooner... Ease of use and properties that deliver this product are outstanding... Using DA polisher can save a lot of time.

[@mintyloogoblin]

They have. Dodo Juice did a supernatural wax stick years ago that could be applied via DA, excellent product.

[@dillinja187]

Where's your hoodie Jon ?, Your zip at times was tweaking me out 🤯. Be good channel content and a selling point why hoodies/ t-shirts are a good idea while detailing (basically anything with a zip or metal buttons (jeans) = possible epic fail. Forensic detailing merch out the door win win. 🙂.

[@Morpheus02000]

Isn't that a lot pf wax you used? I always thought an ultra thin layer is better. I used Collinete 845, Fusso Coat and Menzerna Powerlock Ultimate Protection that way.

[@jamesmoirano4271]

Time to market the zipless Forensic Detailing Hoodie!

[@ptvfr800]

I have wondered if manufacturers could produce a wax that is halfway between paste and liquid that could be dispensed from toothpaste type tubes. It will be interesting to see if others copy this idea.

[@klasseact6663]

Jon, been using Gyeon Q2 Wax since last spring and love it! I plan on doing a massive detail on my new car soon w/ Gyeon Pure EVO and will eventually top it with Q2 Wax at some point😉

[@larrysing]

Be wary of applying the Q2 Wax on top of pure. Car Craft Auto Detailing just did a review/test & the panel with PURE EVO that was topped with Q2 Wax lost hydrophobicity before the panel with Pure on it with no topper.

[@klasseact6663]

@@larrysing I'm sub'd to his channel and saw this video come up and not doubting you and certainly not him but Q2 Wax was specifically made to go ontop of coated paint🤔 I know what I'm watching during dinner this evening, thanks for the heads up😉

[@larrysing]

@@klasseact6663 I know - I have a Mohs Syncro EVO coating on one section of my daily driver, & I have put Q2 Wax on top of it. I’m doing occasional washes & tracking the hydrophobics on my channel. It will be interesting to see how well it holds up with the Q2 Wax on top of it, but with Q2 Ceramic Detailer (and an occasional Cure topper) maintaining it.

[@sebster6031]

@@larrysing still not sure why you'd want to mask off a true coat with a wax.

[@larrysing]

@@sebster6031 The same reason anyone puts a “sacrificial layer” on any coating. If you leave a coating without a topper, it degrades faster.

[@markopolo9936]

Careful Jon, buffing in circles means your scratches won’t line up… 😆

[@olestampevestergaard4746]

Hi John, I am getting a new car later this year, and I am using my old one to practice detailling which I have not done before. So I did a deep clean (I thought) and waxed the car, only to realize that in a few spots I have waxed over dirt. On top of that I want to try and polish some scratches, but how do I get through my double speed to do that, do I just need to strip it by washing it a bunch of times? Seems like strippers are not that efficient

[@ForensicDetailing]

You can't strip protection with detergents as a general rule. You need to wash, the area, clay the area, reprotect it m8

[@1669Python]

The Gyeon Q2 is a great product. Very hydrophobic. I will give machine waxing a go.

[@ashleystratton352]

nice video mate, miranda detailing did this a few weeks back i think. great minds think alike.

[@barrybij8079]

Applying a wax or sealant via polisher is awesome..feel like im cheating

[@seankiing5300]

I see your recommendation from your other video and I will be using them one of these weekends, the car looked great before you used the wax what did you use before hand to get it to that stage? Was it that prep and primer seen in the vid?

[@DavidC1]

jon use manual exposure shout keep the haze out of camera

[@dalza_uk9424]

Would love to try this, as a beginner what machine polisher would you recommend and the pads for this ?

[@6daymember]

Do i need to use prep and primer before putting a wax on? I didn't think i did but see you refer to them at the end.

[@ForensicDetailing]

You don't need to but I like too

[@mixtoure]

Nice. No more hand waxing from me. Machine all the way.

[@grahambrown5874]

Great video. Can you recommend a good 150mm pad to remove light scratches with compound and one for polishing with my DA polisher? As a DIY user there are so many choices that causes confusion, and I don't need a professional range of pads. I just want two types in my cupboard that I can buy in pack of five of more, rather than a pack of assorted types. Thanks.

[@ForensicDetailing]

Just use scholl S20 black. Flex purple on hard paint orange soft

[@zzhughesd]

Jon. Another mistake made. Used a black softer pad and wax on a basic drill head and it left holograms. How is this even possible. Know forced rotation for compound reduces chance deeper holograms but plain wax on a drill still left them ???? Did I push the pad in. Wonder what did wrong. I do polish by hand where I compound first. This was a flat black not needing correction. So went in with speed. Drill and wax and failed !!!!!!! Lovely glossy finish and then next day. Saw…. Holograms !!!!!!

[@ForensicDetailing]

hey buddy, yer the same "can" happen with rotary. pressure and speed and the abrasive effect of the wax. Drill is not ideal. It creates heat and micro surface marring when that clearcoat softens from the heat. Best thing is to get a DA mate this just wont happen on DA or very very unlikely to.

[@zzhughesd]

@@ForensicDetailing thanks loads Jon. My original DA can come back out for polishing only. Ditch drill back to seats only use. Stupid me thinking ok for wax application.

[@adambarrett5696]

My f10 m5 to big for my garage. So forced to stay on drive way. I'm getting very addicted to detaling. My question is after wash and drying and decontamination stage. Quite often the light conditions are poor to carry on. So cover car. It may then be left a day or two before I'm able to move on. Would you go over car with a panel wipe. Or a very gentle wash. Or any advice before applying wax. Thanks Jon

[@roguefrederick]

When it comes to investing, nothing pays off more than educating yourself with the right information from the right source. That's how you get rich.

[@pharmacyowner1081]

Stocks are good to invest on, but crypto is more profitable

[@harnandezgranda5905]

Crypto is the new Gold

[@ambitiousadventure1791]

I wanted to trade crypto but got discouraged by the fluctuations in price

[@sarawaisglass239]

@@ambitiousadventure1791 You have to get more experience first, work with a professional like Mr Dave Jevans on crypto to guide you step-by-step.

[@globalpandemic8450]

I heard that his strategies are really good

[@mahdi3181]

Can i do this by using microfiber wax applicator pads on orbital buffer?????

[@ForensicDetailing]

Yes

[@waynegodwin7929]

How much for all 3 Gyeon products you have on display and used in this video plz

[@winogod917]

Hi, I am undecided whether to purchase a da polisher. I am considering rupes duetto 12mm throw or in2detailing da15....could you recommend please?

[@MrChili1496]

currently enjoying your videos, probably going to get myself a das8 after watching you use it, i have a question why is the meguires mt320 so expensive compared to other machines they all do the same thing do they not?

[@ForensicDetailing]

I don't know m8 is the short answer

[@esm9981]

Do you think using the da polisher will degrade a ceramic coating, thinking of using this as a topper on top of my mohs syncro coating.

[@ForensicDetailing]

with a soft finishing pad on low speed should be ok mate but hard question to answer.

[@Spectrum_Auto_Spa]

Love your channel sir. Is t that white pad too aggressive? Black pad be better for wax? Cheers

[@ForensicDetailing]

no its a soft finishing pad rupes I think

[@ej5376]

Bloody English weather! 😂

[@B37oSTAVE]

See you keep reaching for the flex forced rotation!! Is it worth getting the cheaper in2detailing or just wait and get the flex when i have the cash! As a beginner

[@ForensicDetailing]

It's worth it if your really into this. Otherwise no go Chinese

[@hardleyvries2146]

Is that one pad for the machine enough to do the whole body?

[@ForensicDetailing]

with waxing sure. with cutting or polishing no it will overhead.

[@robbiedavison2901]

Does this product finish create a water bead in the rain please.

[@ForensicDetailing]

Hell yer

[@MrOiram46]

Can I also use the machine to buff the wax after applying? I always see people hand buff wax after applying and wondering if it’s okay to buff with a machine to speed up the process instead?

[@ForensicDetailing]

buff buy hand mate

[@Slugworth88]

Hello hoped you might be avke to help me. Iv purchased a torq 22d 16A -240 volt polisher but its arrived with a European plug and the uk adapters are specified as 13A -250 volts? I don't suppose you know if its safe to use the 13A UK adapter for a 16A European plug.

[@ForensicDetailing]

I really dont know mate im sorry

[@NickHubb489]

Hi, I have the same polisher machine as you use here. Have you done a video on what are the best applicator pads to use..? Thanks!

[@harisyoung4110]

Do you use wool or normal sponge pad ?

[@NickHubb489]

@@harisyoung4110 I have the chemical guys sponge pads. But open to wool if it’s better.

[@JD0692]

Really tempted to buy some of that wax. Also, which microfibre cloths are the grey ones you use ?

[@ForensicDetailing]

They come direct from China mill

[@JD0692]

@@ForensicDetailing ok thanks

[@minioner5080]

Jon how do you find gyeon wax when it gets on the black trim,does it stain or not,it’s got a beautiful shine by the way

[@ForensicDetailing]

I'm not sure but prolly want to not get it on trim

[@M.E63]

Still waiting for the review of turtle wax new improved seal n shine , it’s actually called seal n shine now in U.K.

[@harisyoung4110]

Do you using the wool or sponge pad in this video ?

[@ForensicDetailing]

sponge m8

[@davidbarber4428]

May be a stupid question but can you not use a soft wool or micro fibre head on the machine to take off residue so removing with minimal effort, their must be a reason why not as Ive never seen it done and I sure this is a stupid question. Thanks John

[@klasseact6663]

It's not a stupid question but most people just use a good mf towel to remove the wax because it's easier and just better to do so.

[@klasseact6663]

Faster as well because you don't have to keep picking up and putting down a machine. Plus you've gotta use a mf towel for fine tuning anyways💡😉

[@MegaFregel]

Also a machine creates too much heat.

[@klasseact6663]

@@MegaFregel great point and the points are mounting here...use a mf towel and call it a day!

[@no_lft_shft]

God I want to give that wax a go on my car. The only thing is I have "carbon fiber" racing stripes that were installed from the factory. Would the wax put a film over that or would I have to avoid it all rogwther

[@ForensicDetailing]

if its clearcoat CF wax it if its exposed carbon fiber just leave it yer.

[@no_lft_shft]

@@ForensicDetailing yeah it's exposed. Thanks boss

[@davidfigg]

Could I use the da8 from in2detailing to apply AG ultra HD wax ? If so which pad should I be using? Thanks 👍

[@ForensicDetailing]

Yes use sift pad like rupes white. Or fkex red. Problem will be getting wax out of pot onto pad. Pad bigger than pot

[@mm7460]

Says discount code not valid on items in basket, da8, mjjc cannon, bilt hamber clay bar and hex logic pads 🤷‍♂️

[@ForensicDetailing]

Not all items are discountable. But where they are it will apply it.

[@gizmo6164]

It‘s spitting,……….. it’s SPITTING!!!!!!!😱

[@Silverbullet767]

EVERYBODY IN!

[@79blustone]

Wondering if Q2 Primer can be applied by hand?

[@ForensicDetailing]

Onr for gyeon m8

[@aaronbell8527]

What’s the best stuff for getting bugs off the bumper

[@ForensicDetailing]

stay tuned :)

[@martin1649]

4:00 happy tommyfyeah noises

[@adolphoneutzling4669]

wax bar??

[@01123581321341]

I’m planning on using Gyeon Primer before their EVO ONE coating soon 👍 using Gyeon’s white pads - would you recommend slow machine speeds and working times Jon ?

[@ForensicDetailing]

Chris I have video on this coming soon. Primer can be worked on softer pads with no issue High speed will be ok, but keep it at medium like brand suggest. Forgiving to use and buffs well. It's easy u will love it

[@01123581321341]

@@ForensicDetailing Cheers 👌 hear good things about it and the EVO range. Gyeon make you want their products🤣

[@glennburton84]

What flex machine is that?

[@ForensicDetailing]

Xce cordless

[@czarekp3552]

keep going

[@paul6749]

Very useful video, but considering how critical the type of pad could be to the overall ease of application it’s surprising that there is no mention of it in the video, and only vague replies in the comments. The only omission from an otherwise informative video. Love the technical term “buffage”😃

[@ForensicDetailing]

Just use soft foam pad it's not critical lol. It's a rupes white, could use any foam finishing pad

[@jacobcohen9205]

what pad was being used ,anybody?

[@frzen]

The reason it went blurry was the camera was focusing on the reflection instead of the car at the start

[@TheM3smg]

What pad Jon

[@ForensicDetailing]

i think its a rupes finishing foam or a Buff N Shine URO foam one.

[@NipponStiqqyPaint]

Yo Dad, as a quick aside - do you think it would be worthwhile to do a deep dive on claying a coating? Adams did a video on their graphene coating/claying the coating after a year. The comments section went wild and were in all directions 😵‍💫 I really dunno either way, just thought it was interesting ¯\_(ツ)_/¯

[@as680783]

I'm personally, pro-claying a coating. Even with some maintenance, a coating will suffer some degree of performance deterioration after a year. If the owner doesn't periodically decontaminate their paint with fallout remover, tar/glue remover/TFR etc., they're going to get embedded contaminants that will affect the hydrophibicity of the coating. Claying an underperforming coating will remove these contaminants and in most cases, revive its properties.

[@TheM3smg]

👍🏾

[@indyrock8148]

So many waxes, so little time.

[@jawad5867]

1st

[@garymartin557]

did you win a prize?