You guys are killing it on the support across the social media platforms lately. I truly appreciate it! I never announced that I have a TikTok on KZbin, but it is also @ ShopLifeTV. The only social media platforms I have are: TikTok (ShopLifeTV), Instagram (ShopLifeTV), and KZbin so don't get scammed into thinking its me somewhere else lol (yes there have been imposters on forums and other platforms).
@christophercilia92142 жыл бұрын
Hi m8. I have an 04 manual M3 and it developed a slight idle knocking noise on startup only. Sent you a message and the video on Instagram. Can you have a look if you can please? Thanks in advance and keep up the good work. Helped me a ton working on my E46s
@ShopLifeTV2 жыл бұрын
@@christophercilia9214 Hey! I get tons of messages for diagnostic help so I only do diagnostic help through my website at www.shoplifetv.com . Depending on the knocking noise, it can be vanos, valve adjustment, rod bearings, pulley, or exhaust related. Your best option will be to start diagnosing one item at a time to track down the location of the noise (mechanics stethoscope or long screwdriver).
@cruzdelgado81092 жыл бұрын
@@ShopLifeTV great advice Chris try your best to pin down the area of the problem.
@rickybird60152 жыл бұрын
come back to la !
@TheJ8skater2 жыл бұрын
Was just about to have dinner and now i see your upload, perfect timing
@ShopLifeTV2 жыл бұрын
Lol I love watching videos while eating as well!
@keroshanpillay81802 жыл бұрын
South Africa 🇿🇦 in the house ...
@ShopLifeTV2 жыл бұрын
YAY SOUTH AFRICA!
@cfunited68852 жыл бұрын
Literally my dream car watching all ur vids so one day I get one
@razorrich2 жыл бұрын
S54 meister! I’m really digging this series. Way to go guys!
@rossellcastillo98382 жыл бұрын
His “not that expensive” is expensive asf for mee🤧😂😂
@francispowell18112 жыл бұрын
Yeah...the flywheel comment... lol
@cruzdelgado81092 жыл бұрын
Love all the videos great description on the task. You make the work look easy thanks for all your information keep them coming.
@ShopLifeTV2 жыл бұрын
Thanks Cruz!
@SavageBunny12 жыл бұрын
I always get my flywheels resurfaced here in San Diego at Southland Clutch, for DMFW they charge $85, I use a 3 jaw bearing puller, a large socket and the throw out bearing to reset the pressure plate, and I always save the "throwing star" looking plates the clutches come with with the 14mm hex in the middle(I think it's a 14) and put it back, as good as new.
@MuhammadFaizan-km2hh2 жыл бұрын
Love all the videos great description on the task. You make the work look easy thanks for all your information keep them coming. Bro I want working with you
@Nico_335i_DCT2 жыл бұрын
Thanks for sharing guys. Dutch regards, Nico.
@mannabatth40922 жыл бұрын
Great videos bro 😎 When r u gonna do dct swap seen some people running f80 dct with s54 m54 motors 👌
@gmanvuk77402 жыл бұрын
Hope you do a video on that tail panel replacement there isn’t one anywhere on the internet!
@dfrankenbach12 жыл бұрын
I would suggest recommending to the customer to invest a bit of extra money and get a manual transmission wiring harness. This way all the SMG wiring will be eliminated. I did that on my 330 when I swapped it. Cleans up all the clutter
@rickybird60152 жыл бұрын
what trans does that come with
@GG99MW22 жыл бұрын
Did you swap from ssg to manual 330 ? If yes what are the steps done .
@andydhillon19772 жыл бұрын
I agree. Fixing up this car isn't a bad idea since most of what's being done to it can be swapped to a better chassis. I actually like buying donor cars to use as parts cars so I can tear the car apart, prep all the parts I need to, then buy the car I want and swap everything over to it pretty seamlessly. Also, general advice to men. Don't get married. There's no benefit to men when it comes to marriage! There is such a low probability you won't have your life destroyed. Sorry. Had to say that, but it's true. Lol
@carloslargaespada60512 жыл бұрын
Agreed!!!
@bronsoncole82802 жыл бұрын
And true point it's seems really not that bad when you buy a part or two but once all the parts a unit gets expensive and quickly .. specially if u love the car and are paying to do it the right way.. I've spent 3500 on my e46 this year just on needed maintenance and didn't even get it drivable until the month if November.. so it costed a ton and I lost the whole season of driving where I live ..
@RoleyChiu2 жыл бұрын
haha you sing the song of our people. e46 life.
@kianward59992 жыл бұрын
amazing bro great content az allways and great work love the channel
@ShopLifeTV2 жыл бұрын
Appreciate you Kian!
@bronsoncole82802 жыл бұрын
Major bmw lover and fan of the channel can't wait to watching the Copart m3 Come together .. I just did all this on my CI but my car is manual not smg
@kellytaylor31342 жыл бұрын
Yooo uk in the building love the vids
@ShopLifeTV2 жыл бұрын
WOO UK!
@SteveAFCLondon2 жыл бұрын
Loving this M3 stuff 👍
@ShopLifeTV2 жыл бұрын
Lots more to come!! Thanks!
@SteveAFCLondon2 жыл бұрын
@@ShopLifeTV I wish you were UK based Jason, then you could work on mine !
@sajadeshahidpour20082 жыл бұрын
10:32 Ah, the timeless accessory belt trick on a date. "The belt is broken, I can fix it only with your pantyhose ."
@jalloor2 жыл бұрын
Love the videos! Great job!
@davidramez62192 жыл бұрын
Please perform a DIY on a CSL airbox.
@fastlane1802 жыл бұрын
“One thing I’m noticing it’s wet in here” “It’s so moist”LOL
@ShopLifeTV2 жыл бұрын
Lmao
@Mlt..9992 жыл бұрын
Hey I been getting high revs btween 2500 and 3000 rpm on my E46 smg..Can you tell me what that means? thank you
@paulgarcia4582 жыл бұрын
I got an 05 325i sitting here
@machtschnell74522 жыл бұрын
I see why a few do a S65 or even S85 dry dump with DCT conversion.
@Che1seabluesdrogba112 жыл бұрын
If you replace the the clamps, always make sure that it isn't getting in the way of any moving parts
@Che1seabluesdrogba112 жыл бұрын
That bottom hose on my non SMG was such a pain in the ass probably what took me the longest
@sukhjitsingh862 жыл бұрын
Jason, my e46 2003 is losing coolant, I have put on new coolant reservoir, pump is good and thermostat is okay..still it is losing 100ml every 3 or 4 days..mechanics are clueless they have done pressure testing n found zero leak. What could be another reason??any idea?
@TechTokOffical2 жыл бұрын
So what does the flywheel size have to do with how the transmission works? When I did my swap on my e36 328 I could only get a getrag from a 325. So when I ordered the flywheel,clutch and PP I ordered based off the 325 vin on the transmission(I didn't know and couldn't get a answer) rather than my 328's vin. Now I've got a zf to go in(my getrag grinds 5th) there and I don't know what to do. My whole set-up is less than a year old. The flywheels are the same diameter,but the one for the 328(zf) is a different thickness than the 325(getrag)that I have put in. But then I wondered if I would use a single mass fw, wouldn't it be a different thickness then the oem dual mass. So what does the thickness of the 2 dual mass flywheels have to do with how the 2 different transmissions operate? Can I use the brand new dual mass from the getrag for the zf?
@irelandfortheirish70772 жыл бұрын
Those alloys are nice. What are they?
@solstar47782 жыл бұрын
Need some lubricant on the rubber !
@ΙερώνυμοςΚόρακας2 жыл бұрын
When you finish the car, PLEASE PLEASE Post how much it cost TOTAL. I watched the video where you got the car, and how much you estimated on it. But I want to know how much it ACTUALLY cost to do all the repairs AFTER you're done with it.
@houseofno2 жыл бұрын
I strongly advise to consider this as an estimate ONLY. I realize there are viewers all over the world. Lots of variances here. Different countries may have added taxes, fees, tariffs, customs duties, etc. Nothing like having a viewer irate that their cost is thousands of dollars MORE due to fees and added costs that didn't apply to Jason.
@livingforgodlonglife32902 жыл бұрын
hie , i have been following you.may you assist i have a 2000 bmw e46 318i m43 auto.i changed the engine an d i put the bmw e36 318i sohc engine .i also put the engine wiring harness for the bmw e36 engine and the ecu. are you able to assist me as to how i go with connections .im based in South Africa
@macfresh46812 жыл бұрын
I need a E46 M3 front bumper rep or not for non m E46 Atlanta based
@ShopLifeTV2 жыл бұрын
For non m E46, only replica M3 front bumpers will fit (made for non-m) unless you have m3 front fenders installed. I am pretty sure most places are backordered on the rep bumpers for non-m's but you can check ModBargains, eBay, Ecs Tuning
@tommytenzo2 жыл бұрын
I’m selling an Alpine white e46 m3 front bumper, but in Texas.
@macfresh46812 жыл бұрын
@@tommytenzo willing to ship or meet would be great
@grvyrdgang56722 жыл бұрын
Update on the e36?
@ShopLifeTV2 жыл бұрын
Its going to need a whole video for an update...its a bad one
@BmwMe-uh9sy2 жыл бұрын
That exactly right there is why you don’t buy a used m off an auction, always unexpected things you don’t even know about, better off finding a good one in person then making an offer
@rayj332 жыл бұрын
wedding in CA or in india?
@masonichisenga30322 жыл бұрын
Do I have to change the sump on an S54 engine for it to work in an X3?
@SavageBunny12 жыл бұрын
Are you doing an S54 X3? Obviously a 6 speed, how are you foing to get the AWD clutch to engage?
@jaya64542 жыл бұрын
👍🏿
@matthewnicholas63652 жыл бұрын
How mad is it that there's basically enough space in the engine bay for another i6 when you remove the airbox 🤣
@machtschnell74522 жыл бұрын
Why S65 fits easily and S85 fits when converted to dry sump.