We Take A Gamble !!! 2014 Mercedes Vito Panel Van LCV

Get 10% off car vertical with this link
www.carvertical.com/gb/landin...
For all sponsorship, Business /media enquiries please email :- [e-mail]
Please note myself or Chris cannot be contacted on the above email as we do not have access. If you would like to get in touch please use private message on Instagram and always include your contact number.
SRUK Merchandise :- www.stadiumsports.co.uk/club-s...
Instagram for daily sneak peeks and Vehicle sales :- salvagerebu...
Welcome to the Salvage Rebuilds UK channel. In this video we take a gamble on a Mercedes Vito van with no mot and a few faults!
Working at our fully equipped workshop in Kent we carry out tasks including Panel beating , Body work , Mig Welding , Sheet metal Spot Welding , Fabrication Chassis Repairs , Sand Blasting , Engine and Mechanical repairs , DPF cleaning , Restoration and Structural repairs on the Celette Jig frame machine.
We do hope you enjoy this video and Check out our other videos on all kinds of vehicles including Barn finds , Quick flips , First wash , Repairs , Salvage , Restorations , Will it run , Fail , Accident damaged , Cat S , Cat N , Cat X Copart auction bargains , Non Runner , Flood damage , insurance write off , fire damage , smoke damage , electrical fault , stolen recovered , Unfinished project and anything else that arrives at the #Salvagerebuildsuk workshop. #RobandChris
Please check out our back catalogue of some previous projects on various different makes and models including Ferrari, RS Turbo , Land Rover , MG , Caterham 7 , Ford , Cosworth , Vauxhall , Fiat , Peugeot , Mercedes , Range Rover , Morris , Renault , Citroen , Honda , Toyota , VW , Series 3 , Evoque , GLA , Golf , 500 , Fiesta , Astra , Polo , Motorhome , Auto sleeper Camper , GTI , LSE , Sierra , Midget , 360 , Transit , Crafter , Transporter , T5 , Combo, Berlingo , Partner , Mini , Beetle , Vivaro , Hilux , Sport and many more!
If you have a vehicle for sale that you think will be of interest to us please message Rob via Instagram and please include a contact phone number. We buy all sorts of vehicles , Boats and classic cars including Austin , Morris , Healey , Mg , Sunbeam , Talbot , Opel , XR2 , XR3 , XR4 , Bentley , Jaguar XJ6 XJ12 XJS , E Type , XKR , BMW E36 , 205 GTI , VW GTI , Viva , Astra GTE 2.0XE , Red Top , Triumph TR , VW Golf Beetle , Rover , MGB , 2CV , Midget , Nova , Chevette , Capri , P100 , lancia , Cortina MK1 Mk2 MK3 MK4 MK5 , GT6 , Jensen , Lotus , Bedford , J type , Minor , Datsun , Toyota , Sunseeker , Princess , Fairline , Windy , Hardy , RIB , Shetland , Fletcher , Bayliner , Searay , Pilot , Shakespere and many more!
We do receive quite a few questions regarding tools and equipment that we use for various jobs. Unfortunately there is to many to list but some of the brands we use include Snap-on, Blue-point , Makita , Sealey , Clark , Esab and Sykes-Pickavant .
If you are interested in a specific tool, please put your question in the comments section of the relevant video

[@kossak007]

It's so heartwarming to see the respect and politeness between Rob and Chris. It really is!

[@TheGrimSleeper7]

Chris is so laid back. If he doesn't become the new James Bond then there's gonna be riots. Great video 👏👏👏

[@robturner7945]

THE best comment! 👍🏻

[@joepineapples7774]

licensed to chill

[@andynightingale7335]

Never shaken, just mildly stirred....

[@darrenrichmond5299]

Chris done a great job and even a bit of chat which was great. Do a bit more mate. Kind regards everyone, Darren in Great Yarmouth

[@NedNew]

Darren, don't forget you still owe me a fish and chips!

[@tonyroyle4217]

You guys are brilliant 👏 i envy you're friendships and being able to run your own place. Just to top it off your both really decent and honest blokes. To find honest decent dealers nowadays is difficult. Fan for like here. Would love to have a coffee with these 2 and watch chris at work, seriously intelligent man. All the best to you both and your familys. ✌👊.

[@bradwhiteuk]

Quality of these videos has really taken a step up recently. More Chris in the videos is great! Keep 'em coming guys 👍

[@Michael-m4y]

Nice to see chris doing more on the videos

[@ged3680]

Hello Chris and Rob, great team effort on these vans. Special thank you to Chris for his continued ‘pieces to camera’ very much appreciated and enjoyed. Thank you for taking the time to upload another video. Ged

[@GSKickel]

Another great video lads. Really enjoying Chris getting more involved in the making of the videos and explaining his techniques as he works his magic.

[@johnmehaffey9953]

That’s more like it Chris I really like the way you’re beginning to interact with the camera and telling us what you’re doing, just like rob to get you welding again, glad you are charging proper money guys , people shouldn’t forget that you are a business and you’ve got overheads , ie the garage , heating, electricity, etc, enjoyed the vlog guys

[@robturner7945]

Rob on another adventure, Chris is a bloody genius and oil glugs when the can is not tipped sideways 😁. Superb as always.

[@memyself7413]

The consideration, tenacity, politeness , thought and really hard work that you two put into your efforts, give everybody listening, and watching, a lot of hope. We all wish that "Rob and Chris" were here to take our cars to........because you (Both) are, without a shadow of a doubt, truthful and honest. We trust and we like you.

[@willchet9241]

Props to Chris for making an effort with filming.

[@koreainsincere]

You two are a bit special. Modest, unassuming but bloody brilliant. This is such good content, we're lucky to have you on here.

[@benwaterton805]

Love it when Chris pulls out the little tricks for the door great video.

[@ZL-jr5xp]

Chris taking over camera duties, well done!

[@General_Confusion]

When your trying to put oil in an engine, just make a small hole on the handle to let the air in Rob. Or, spend a tenner and get 20 plastic funnels and leave them laying all over the workshop.

[@jamesbrett6518]

Once on a Channel 4 program, Bernie Fineman was tell8ng everyone his "tip" of rolling a magazine up. Far easier to cut down a drink bottle

[@sruk]

🤦🏻‍♂️🤣

[@mikeberry304]

They dont do mess , tidy guys

[@chriseccles1454]

Short round head screw will reseal ready to use for used oil disposal. We used to mix used oil and proper creosote to protect wooden fences especially new posts at family home.

[@SalimKhan-gk1fh]

Why not just hold the container sideways then it will not ‘glug! As u pour into engine simple!

[@williamdonly7966]

Well done Chris, doing your peice to camera fixing that door. What another awsome buy guys !! Quick turn around, well done for taking the gamble !!

[@richardjones5255]

A great turn around on the Vito Van, nothing missed out, and nothing glossed over. Considering the gamble you took, the journeying about and all the brisk work you have done, you have earned a fair return for your confidence. It is a valid point, you stuck your necks that bit further than others with your winning bids, the seller had his money, you won the vehicles, and worked the profit. An excellent result for everyone in my book.

[@benevans3733]

Well done to chris for getting the lines so good on the drivers door

[@robertwinsper7409]

History repeats itself. My dear departed Dad spannered and drove for a member of the Birmingham speedway team. Every year they would purchase a big car, Zodiac or suchlike "up north" as the team transport, replace the rear bumper with a channel section to carry a bike and away they went . The season finale was always at Wembley where they would sell the season 'bus'. The price differential was usually enough to negate the overall cost for the year.

[@stevedane787]

Nice bit of "gentle persuasion" from Chris to realign the door. Quick flip and a good profit as well Can't be bad.

[@1mic3]

Am I alone in wanting to see the new gear knob in place ? 😂😂😂 great video as always 👍👍👍

[@petedig5809]

Rob, don’t ever apologise for making a profit. You are so transparent with the numbers and everyone can see the quality of the work you do. No matter what you make, someone is going to get a great van at a great price, especially in the current difficult market. You both have a living to make and you take the risks.

[@ged3680]

Hello Rob and Chris, another excellent video showing how you both work as a team to get projects done. Thank you for taking the time to upload another video. Ged

[@alextripp1230]

Hi Rob and Chris, now this is a tidy van, nice to see you fitted new front tyres. Chris was mustard sorting that front door out so quickly. Nice quick turnaround and enjoyed the video guy's. Cheers, Alex.

[@oldboy1690]

M62 which way we're you going? I know you said you get lost easy!

[@craigburrow8403]

Nice one on this one - Nice to hear Chris join in with the explanation on the door fix - Keep it up lads - I really enjoy watching your channel. Cheers

[@markharvey3007]

love watching chris work

[@andyparker522]

Love the Chris segments. They really balance out the videos.. keep up the great work guys!!

[@sonnytaylor6580]

Love how Chris is getting involved 👍🏻 great video guys, keep them coming!

[@RobDavies1972]

Great work lads 👍

[@pamboskourtoulos5239]

When i first saw the van, i said to myself, no way too much exterior to do, but you did it again bravo. Have a great weekend

[@jeremyaustin9103]

Favourite KZbin channel. Chris is so gifted

[@PeterJames-cr1ul]

Nice and easy quick turnaround, love it.

[@darrencowley8265]

Hi Robin Chris I know I keep on saying the same thing week in week out but but what a great video again take care both 👍🏻😊

[@sruk]

Thank you we appreciate the comments 👍

[@66mjtaylor]

Great job guys, thanks for your continued efforts in pulling together these videos

[@millrythe100]

Two of the nicest honest guys in the industry

[@lisadennisorourke797]

Great content and great guys to watch.

[@williamchisholm5776]

Another great turn around for you guys well done

[@super6954]

Thanks for another great video, I bet Chris finds straightening doors back either goes easy or they are a pain. over the years I've probably done 50 steel framed tractor/machine cab doors guys have smacked into gateposts and other things and that's what I find. Yeah that dogs smart with that ball. We use to fatten 5000 pigs a year here. Those animals ripped the boards off in the barns and figured out pushing a 6ft long planed 2x6 piece out of a mesh gate in the end of the barns with 6" x 4" holes in it. Quite often we'd find stuff they found or ripped off outside in the mornings where they chucked it out after playing with it for a while. They'd even throw all the bits of a Stanley knife out over a few days if one got dropped in there while cutting strings on bales and they found it. Take care guys.

[@jonathanhammond3748]

Quality fix yet again guys. Great to have Chris’ commentary too! Brilliant channel. 👍

[@Wightmech]

Great van guys and again another really good practical lesson from Chris. Thanks both, looking forward to the next one!

[@stevewhite1444]

Great video guys short and sweet but just shows if you know your stuff you can do well. Loving seeing and hearing Chris more. He knows his stuff and always interesting. Have a good weekend guys 👍

[@mrmawson2438]

Nice one Chris it's spot on

[@martf9875]

Hi Rob Chris ,,yet another great vid ,,it is nice for a change as you haven't had to work hard to make a crust ,,,turned out a nice little van ,,Chris doing his magic yet again on the door ,,enjoy your profit,,you never kick the arse,,,out of any money you ask ,,keep em coming, stay safe all 👍

[@sprograt]

Great to see another video. 👍

[@kevinthomas1259]

Great to see Chris straightening those hinges. A brilliant return for not too much work, but appreciate the trouble you go to to pick them up.

[@jerzywoking1699]

I remember someone on Dragons Den developed an attachment to screw to an oil container to stop the oil from glugging. He was crestfallen when Peter Jones said "just turn the can on its side and it pours perfectly". Exited empty handed.

[@warty5007]

Nice one boys keep your brilliant work coming

[@-chris1965]

Love your travels Rob

[@richardtomkinson9951]

Another top job guys, well done.

[@arthurblundell6128]

THese Wolverhampton ones have been so interesting --after they have run out could you find some in Edinburgh to keep us all going !!

[@sammytheseal2307]

Thanks Chris for the narration, keep it coming pretty please 😉

[@paulchilds8884]

great video guys you learn a lot from both of you

[@kingdick30]

Well done guys, had a few of those vans now and still running one, really dependable and well built and main dealer parts are surprisingly priced. Whoever buys it will be well pleased.

[@stevet1963]

Nice job guys Chris is really coming out of his shell with his narration and dry humour 👍🏻✌️🙌🙌

[@Highbury007]

Like watching your video spent a lot of time on sheppy in my youth but now live in Essex just seeing the old bridge and of course your repairs great fun to watch

[@gavowassy7655]

Cracking video.. Love that Chris is doing his bit to camera... Keep saying it this is what wheeler dealers should be like... You guys need to be on TV

[@stevedane787]

I would say that being on TV is the last thing they want. As things stand,they have total control over the content, whereas being on TV means that you work through a production company, so you have to do as the director or producer wants. Look at the way Wheeler Dealers went down the pan when it got sold to the Americans. Don't change a thing.

[@norfolkboy6935]

Keep rolling the dice boys. Great content 👍

[@atvseatexchange2176]

Fantastic job men.

[@stephenricketts7764]

Taking a chance on all those vans is as you know part of your kind of work. Generally you manage to get off OK. That was a bit naughty with the roof but I have seen it before, it is usually just laziness, take the rack off and can't be bothered to plug the holes . The same goes for the door, just throw some washers in that will do. You two would never do such a thing I know but you are right Rob in saying how far do you go. Great video and numbers gents have a good weekend Chris and Rob. 👍👍

[@nickmackenzie703]

Nice job Chris and rob on the merc van.

[@benevans3733]

Really enjoy your longer videos

[@haydenuk02]

Great work and thanks for sharing this with us take care

[@theteacaddy2766]

What a nice quick turnaround video. Makes great content as always !!! Looking forward to seeing what takes its place.

[@woodrimcars2324]

Great result 👏 Guy's. Love seeing Chris's skills again. Keep the video's coming.

[@andygraham2325]

You two seem great mates,great video.

[@jamiemason9548]

Hi Rob & Chris you both have done well with the van you both done you magic all the best to you & your family

[@westernmonitor]

Great vid Rob and Chris a Friday treat for me

[@jasonree]

Another great job guys!!

[@jimgardner9044]

I think the technical term you are describing is "GLUG GLUG GLUG" but I just call it and air-lock. Special thanks to Chris for taking the time to show us what he was doing with the door. Cheers, Jim in NZ.

[@tomiboyc4423]

Keep up the travelling Rob and you’ll be the Alan whicker of the salvage world in no time. great video again as always guys 👏👏👏

[@1978JonBullock]

Rob and Chris another great video. Great find by Carvertical on the milage. Another cracking van somebody is going to be very happy.

[@mattwebber6763]

Great job as always

[@benevans3733]

Hope you both have had a good weekend

[@cornishrider]

Great narrative from Chris, nice van values are high at the moment so glad you can make a good profit.

[@andy_v4443]

Nice one guys 👍👍

[@stehaughton5074]

Another Quick turn around, easy money 👍👍

[@jpoccasions227]

Love the way the Chris works.spot on as usually Chris😀👍

[@rickydub6950]

Great job guys 😎👍

[@sara-tc_uk9383]

Great video as always guys. Love that Chris is getting more talkative, just needs a t-shirt now that says "I'm learning to waffle" 😁

[@stevenjones19-m8i]

Hi Rob and Chris,another great van.just cleaning it has made a difference.Do the holes in the roof and it will be a nice van to sell on.

[@ericglass952]

Great job to both of you and Chris for sorting the with a clever fix

[@anthonymillar6183]

Chris done brill lining up door I’m driving vitos years lovely to get in and out of all day Mercedes strong engine 💪🏻💪🏻 That’s nice profit rob Even though collecting it was a pain 😂 Great video both of you Keep it up 👍 👍

[@mattmpower5977]

Great van guys good buy for someone , I luv the Chris Fix hinge segment !! Keep um coming guys

[@mrt864]

Another great episode. Top channel. Keep them coming.

[@telfordlive]

Rear tailgate and twin side doors is a great configuration. Tailgate keeps the rain off you.

[@markopolo9559]

These Vito vans are amazing and well built vans. I had one for years and my collegue had his for 5 years and drove 50k miles a year.

[@markbanks239]

Tell chris it was great to hear him loved his chat someone gets a good van there rob good little looker great price too thanks again guys totally brill stay safe take care c u monday cant wait bfn

[@TheTomlar]

Great to see Chris having more input on camera. Great video as always guys 👍🧰🔧

[@michaelhynds8035]

Excellent. Great stuff as always. Superb teamwork. Nice profit. Well done. Thank you for sharing.

[@neilrees2832]

Great video guys

[@andypeebles2242]

Great vid, good work from Chris, a tidy van and a nice little earner for you. Well done guys.

[@Tim67620]

Another great video guys and a really quick flip, even with the travelling. Don't forget to change the gear knob. You must have mentioned it four times. All the best and great stuff.

[@davidemery8235]

Nice one guys good looking van

[@darrenallen898]

Nice to see chris on camara more he is 1 smart fella great videos never miss 1 have a good week end boys .

[@tommyolsen8224]

What a great van 🤩

[@kevincross9206]

Nice work again gents. Have a good weekend 👍🏻

[@martincowie4277]

Love these van videos. 👏

[@jimschafer9196]

Another lovely flip, my dad taught me about the door adjustment back in the day, I have used it several times.