We Teach You How To WHAT?!

[@bobdown410]

Wrap the cord the other way round so it rolls up on the outside, that way it won’t catch anything on the way up or down. See if you can get hold of a boat winch so you can crank the handle and make it a lot easier, it’ll also lock in place when it’s up.

[@Garage_Speed]

I know I know, But i didnt want the white roll part showing. 😄

[@robertragsdale6955]

Great concept to reality. If you have problem with it removing parts from the shelf. Have it roll up to the outside instead of the inside. Then it won't be able to grab things as it rolls down.

[@DownNDirty_OffRoad]

I love it, a bit squeaky, but it works!!!😃 Thought about doing something like this in my shop.

[@jeffro8373]

Glad you're keeping it up. Love the video guys, I hope you're having a great day ❤❤💯🤙

[@frediefarmer]

👍🏽🇺🇸👍🏽. Always herd necessity is the mother of invention.. great job guys

[@000302lf]

Hey guys after having built one of those a long time ago I learned that you should roll it up from the front not the back, You will destroy your banner in short order. I put a wheel chair loading winch on mine and I used it almost daily, but after I started rolling it from the front there was no more damage. Any worm drive type of winch will work fine and with the worm drive it stays where ever you stop it. Just sayin I don't want to be called a know it all, just trying to help with a lesson I learned the hard way.

[@000302lf]

I don't think so, find something else to do.

[@000302lf]

I don't think so, find something else to do.

[@jeepgreatstories]

Bec’s Wizard of Oz reference though… ❤😂

[@davewhanger6722]

One just never knows what we were learning from you guys and girls!

[@johnperun232]

Great Content 👍on how to make it happen for your storage, love the idea how you made the curtain roll up Very impressive, and innovative 💡👏 You Folks have some great ideas 💡 Have a Great Day 👍 God Bless America 🇺🇸🙏🇺🇸

[@rerod650]

Like the idea. I would say make the tube roll up the outside so your not knocking off anything that’s sticking out. Would maybe roll up easier too. A winch would be a good idea too in the future

[@slopsec2358]

Cool idea.. It would be less friction (easier to roll) if it rolled up on the front side, rather than the back. Either that or make a z-rig to over come the weight/friction issue.

[@condor414]

I agree, simply wind the rope the opposite way around the exhaust tubing and Bob's your uncle !

[@richsmith3120]

Not a bad idea! All you need to finish it off with is either a manual crank or electric wrench and oil the pulleys! Happy Trails to all at LBN!

[@michaelw2304]

I like the way your brain works. Good job you two

[@SCWanderer]

Ya, as others have said, wrap the drum to roll the other way and it can't catch the stuff on the shelf.

[@joshuatyson3497]

On today's, the daily adventures of Bec and Chris... love yall soo much

[@jeffpeterson5157]

I used those pulleys for hanging a small boat, They Suck! Get some pulleys with ball bearings and it will be 10x easer. Look at sail boat stuff for good small pulleys.

[@jasonmorales1846]

Should of wrapped the rope around the pipe in the other direction so it would roll up on the outside so you won't catch objects on the shelf.

[@Skul1dugg3ry]

I feel like Chris is this Mr. Miyagi guy who knows how to do all this stuff and no one knows why or how he learned it, and Bec is his Daniel who is picking up all of it and will soon be the next Master... I would love to have a video where Chris tell us how he has come about all of this knowledge. I think I know he is a Marine, but surely he didn't learn all of this stuff there. Dude has too much knowledge for the average human...

[@skylerwilliams]

Get wall mount hand winch, remove the handle, and use a drill instead.

[@Bleda2002]

Buy a boat dock cleat and mount it to the rack, no knots needed to keep it up

[@trjnsd6874]

Ingenuity! Fun with Hoes, and heaving!? Funny how the more shelving one has the more things end up on benches and floors. Boxes and labels next! Got a spare winch? How about an old Starter motor! You two are so fun! LiteBriteNationWizardsOfAhs!

[@troybilt6752]

Thank you for your time.

[@garrymatthews4430]

Great one guys love these behind the seens vids. you two work so well together

[@edwardsimmons3721]

Always in need of shop organization ideas. Great stuff.

[@calvinh.8882]

To hold it up you need a "cam cleat". A decent one made from stainless steel is around $15 at Walmart Online.

[@jeffreyforbes2733]

Nice job, like the way you set that up.

[@deanretzlaff2253]

Use a hand crank boat winch..it has the gears to hold itself

[@steveharkins279]

Adding Sumo springs to the steel springs gets rid of shocks, the Sumo Springs carry damping. Less parts lower cost, more efficiency.

[@jeffcombs8237]

So resourceful.

[@garyleibitzke4166]

Pay no attention to the man behind the curtain............................................ 🤣

[@dixiemae5042]

Didn’t Toto find Oz behind the curtain 🫣🤷🏻‍♂️

[@jeffwisemiller3590]

look at sail rigging for a pulley with a jamb cleat. Barton, Harken, Ronstan etc.

[@joeym2675]

Great Idea! Anyone know if you can take CJ7 rocker panels and make them work on a CJ5 to get rid of the kind of round hump in the back of the door jam? I think it’ll make it easier for a taller bigger person like myself to get in and out of! I would think you could cut it and weld it In and but the doors would be the next thing! I don’t know if the door is where they’re longer or just made different?

[@srlewis29]

The boat thing,It’s called a cleat. A little ate winch would work well.

[@vetguy2562]

Exactly what I'm doing this week 😁👍

[@ianmcoutback52]

You need to put the big banner onto the roller doors that way they can be rolled up when you open doors. Just a thought good going guyss

[@fredjames7680]

An oriental motor with a Gearhead to raise your curtain. Oriental Motor Company makes the best electric motors. Maybe sometime I'll tell you the story about when I worked for FAO Schwarz as the West Coast animation service technician and became familiar with Oriental Motors

[@juanjr1213]

I would love to see a whole video with bloopers 🤞🤞

[@fredjames7680]

Us sailors call it a cleat.

[@jasonmietus5792]

Use a hand winch that goes on a boat trailer to raise the curtain.

[@LTUSATV]

I would have added eyelets to the top and hung it like a sliding welding curtain on a rail, either way works. :)

[@Thundercat68]

Is there anything these two can’t do?? Brilliant 👍🏻

[@Golden-69]

Now, Bec can take a nap behind the curtain.

[@RichGurska]

Is it just me, but if you made the sign roll up in the front instead of in the back, you’d never have to worry about it catching on anything as it up and down……it would just roll over it.

[@kjmunster]

Everyone has one so here is mine.... i would of rolled it the other way, that way it doesn't get stuck un stuff sticking out.... thats just me.... love your content..

[@dixiemae5042]

A 12000 badlands winch should make easy work of that 👍🏻

[@DavesRepairService]

Why don't you like a harbour freight 2500 lb winch to raise and lower the curtain.. it would be cheap enough

[@jamescagle5208]

Pop over to Harbor Freight and pick up a little a/c winch, then you can raise and lower it with the push of a button.

[@NANKEL1]

I can see a E/winch coming

[@dixiemae5042]

Fourth fourth from Tenn 👊🏻💪🏻

[@realbob6669]

Hook the ropes to a motor dor door garages.

[@mikemathis3936]

It would maybe go up easier and roll onto the muffler pipe a little better if you wound the rope onto the muffler in the other direction (by other direction I mean...you are right it is difficult to express this in words.. think clockwise versus counter clo0ckwise)If it were wound up the other way the muffler pipe could roll up the vertical surface instead of doing a burnout all the way up and down. On the negative side of this when you let the curtain down it could want to roll down much faster and use more strength to control it's s

[@DADDYO3]

Yes. Keep the banner. it looks cool.

[@justinotherig]

G@ddammit Chris! Now I have to go listen to Paul Simon!

[@Garage_Speed]

I know it would have been easier to roll it the other way. But i didnt want the white roll showing on the outside... Cleaner this way when its up.😆😅

[@joeanthonyverdoza778]

Would it be more or less money and views for Chris and beck to have a separate channel just in the shop or does it help like a filler while you travel and do events? I love both❤

[@MugOfPaul]

We just gonna ignore the kei truck in the thumbnail I guess. 😂

[@jimhester1205]

Take another nut, tack a washer to the back of it and locktite it on the end of the bolt so you can put the rope behind it.

[@ArizonaKid]

Good job

[@larrybriggs2920]

I can't believe I sat and watched that video😢

[@steveharkins279]

It’s like the same moment when Bic lighters, destroyed Diamond Match company.

[@brandonmoore1930]

Fookin send it 💯

[@canesfinsfanfromva803]

I'm at Jeep Beach in Daytona and there is hardly any jeeps here compared to last year. Where is everyone?

[@tylerbuhite5432]

Such great husbandry lol

[@Starman1016Adventures]

WD-40, Great idea, Like one other said, it will roll easier the other way. Plus not knocking stuff off the shelf as going up..

[@chath709]

Love it!

[@trjnsd6874]

First on Sunday!

[@JamesTremblay]

Should have moved the curtain to the front half of the shop so that it would be a backdrop to all the work you film....

[@raulriveracrazycat5959]

When are you guys putting Bec's LJ back together. Can't wait to see it...

[@paulmartin769]

Clever!

[@Hillbilly-zn6lx]

Hook an ATV winch on it and call it good 😁

[@davidruppel1216]

You should have talked to me before you did all that work. I used to make those for an awning company that made those.

[@Highflyingdad]

Roll it up on the outside, and it would work way better!

[@iscarran]

Video automatically gets a like because it’s a shop video

[@willy3177]

One more pulley at the bottom should do it.

[@moretoliving2236]

Just word of caution... create some sort of safety mechanism so that if rope breaks, the thing does not come down knocking someone out.

[@DADDYO3]

Have the banner roll up to the outside instead of the inside.

[@steveharkins279]

Would like the Ford Bronco design team to come sign off on your work. If you believe this Bronco design leads to profitability & less part #’s, please come sign your name under the hood. All Ford had to do was chop 3 feet off the best selling F150, add a cap, 2 door and 4 door, pencil’s down in engineering and sell it. Available in Bronco 150 Available in Bronco 250 & Available in Bronco 350 Raptor with Dana 60’s front and rear. Withe 3 inch ride height, and retractable driver steps stock. And this time Ford, don’t screw up the bump stops for the springs to the rears in distance, add Sumo Springs in the 250/350 version. That is a 2 stage suspension.

[@keithcarter4086]

👍👍👍

[@ritchiehostetter8232]

Not a build but it is still a shop video. Did you call me a ho. They must have a lot of fun in the shop

[@robertj.ritchie2979]

should have put it behind everything. Might have cleaned it to make it look nicer.

[@corymorgan1448]

👍😎

[@TwistedOff]

👍

[@trevin1691]

Nothing Chris n Beck can’t rig! Made the worlds largest shower curtain....Beck was right, Chris has experience in (Jack Sparrow) sail rigging🤔

[@steveharkins279]

If Ford was smart, they would just buy the company Sumo Springs, and own the tech. Then deny or licensing to everyone else. The tech is the end of shocks on all vehicles as we know it.

[@tcrasey]

What ever happened to Beca’s build

[@lvinzant6614]

Get a boat trailer winch

[@vbtom]

need to oil those pulleys

[@Beauty_and_TheBeard]

Should roll it up on the outside not the inside

[@thomasboss8968]

Cleats

[@chillis28]

👍❤️ #Jellynation

[@guinnessmon1970]

No need to be coy Roy.

[@jimpawlak7806]

gee... all i can say is don't quit your day job....haha...

[@garytowner9375]

That doesn't look like a shop anymore with that tarp.

[@garytowner9375]

@MrLiteBrite your a troll . They don't do this . Good luck trolling

[@raystevens687]

Good job