We Tear Down Ed’s Golden Nugget Rokon Motorcycle

Robby and crew take apart the Rokon to get it ready for sandblasting and powder coat.
Help support the channel buy Robby Layton T-Shirts, Hats, Patches, Stickers:
www.robbylayton.com
Subscribe: / robbylayton
No One Expected This With Ed's LJ20 Golden Nugget:
• No One Expected This W...
We Finished Ed’s LJ20 Golden Nugget!
• We Finished Ed’s LJ20 ...
Goodbye Golden Nugget... Hello '69 Dodge Charger!
• Goodbye Golden Nugget....
I Found A 100 Year Old Abandoned Tow Truck!
• I Found A 100 Year Old...
Joy Ride In Dad's Car Leaves Teen Buried To The Frame!
• Joy Ride In Dad's Car ...
Epic Barn Find Of A Lifetime, Waking Up An American Classic!
• Epic Barn Find Of A Li...
Abandoned '69 Charger... Will It Drive 1,115 Miles?
• Abandoned '69 Charger....
IT's ALIVE! The Abandon 69' Charger Runs Again
• IT's ALIVE! The Abando...
We Cut The Roof Off Matt’s Off Road Recovery Jeep
• THE BANANA GETS PEELED...
1 Frozen Skid Loader & 2 Trucks With Matt's Off Road Recovery + Trail Mater
• WE ALMOST GAVE UP! 1 F...
Shop Tour Video:
• Shop Tour & Meet The C...
Please like, subscribe, and share!
Thanks for watching, Daddy loves you.
#RobbyLayton #goldennugget #mattsoffroadrecovery

[@inksplashscreenprint5297]

Brushed finish would be closer to the factory look, polished wouldn't last long in the dirt, and it's ugly when scratched and scuffed. Great jobs guys.. Dinners the man!!

[@Alconium]

I agree. I think shining up the wheels will take away from the gold frame. All eyes should be on the Gold.

[@davebrooks6712]

@@Alconium YEP BRUSHED ALUM SEEMS MORE AUTHENIC....JUST LIKE ED

[@tenae9121]

Agreed, don't over-bling it.Brush it.

[@jim-ce5kt]

THIS!!!

[@claraallen12]

might be nice to etch a small message on that aluminum?

[@milcommguy5927]

I am pleased to see you put the original trailer hitch I sent on Ed's Rokon, thank you.

[@lakrfan4980]

As far as restoring the Golden Nugget and the Rokon goes, you guys at Robby Laytons do the most extensive detail work and spare no expense to make these vehicles look so great. The other people who handle the fabrication and mechanical aspects of these projects don't hold a candle to what you guys have contributed. The work quality that your team provides is gratifying to watch and much appreciated.

[@CountryAndClassics]

Seeing that "Slip Spring" sure brought Me back some Memories as GE washers used one in there transmissions fro Agitate to Spin cycles As well as Westinghouse. Replaced many of them in My Appliance Servicing Days in the 60's & 70's. Loved the story Ed told.

[@bripslag]

I vote No on the polished wheels question. I think a brushed satin would fit the overall vibe (and purpose) better.

[@Joe___R]

I would go with a bead blasted finish.

[@quartfeira]

Agree 100%

[@andrewhooper5645]

I also agree 100% on not polishing. I would suggest spinning them somehow and taking like 180 grit sandpaper to them

[@woodyperry5902]

I say polish the wheels

[@joncox5030]

Engine turning (aka jewelling) would look sweet.

[@charleytodd5792]

No to polishing the rims. It’s not a show bike. Ed’s going to use it for what it was built for. Polished won’t look good once it’s been run through the gravel and muck. I can’t see Ed wanting to spend time re-polishing on a regular basis. Great job overall. Can’t wait to see more progress!

[@ralphbaker2850]

Yeah, if it's polished, Edd will scratch it up, but, that's the point. Edd has his memories of how he used the Rockon in the past. This is a new beginning, the new scratches will document what he will do in the future. The bike doesn't bless the man, it's the man that will bless the bike.

[@moparman1962]

I think a nice, even, very fine, blasted finish on the aluminum wheel discs would look more original, old school and also not show scratches as easily, as I see most people have said they agree with. I think Ed would like all of that taken having been taken into consideration on his Rokon.

[@csoprych]

jewel the aluminum wheels

[@uprebel5150]

Because of this series I bought a Rokon on eBay. Same model from 1968 and even yellow. It is arriving in five days and I haven’t slept since. Thanks Ed‼️

[@Robalo-2660]

Ed looks like a real practical kind of guy. He's going to go through mud and water. Just keep it with a new factory look. Clean the wheels and coat the tires with some shine. Don't put "polish wheels" on his to do list.

[@mircomuntener4643]

I guarantee 'polish Rokon wheels' will never be on Ed's To Do. These guy's mission is to give Ed the nicest gift they possibly can. They have no expectations of any of this staying in pristine condition, but they do it this way anyway because that's just how they do. It's also great advertising for their regular work.

[@Robalo-2660]

@@mircomuntener4643 I with you 100% , It's a work bike . There are a lot out there calling for polish and I thought I'd put my two cents in . In my opinion polish wheels don't fit the bike . Once you start polishing aluminum, you take away the protective oxidation , you are no longer wash and wear.

[@mircomuntener4643]

@@Robalo-2660 truckers near me, including log truck drivers, routinely give their trucks a periodic show shine that includes polishing the alcoa wheels, then go right back to work. Those wheels will re-patina right back to how they are, and everyone's fine with that. Polished aluminium looks fantastic, if only for a little while. Way better than chrome. So little is removed, nobody is harming snything to polish it, and all the over the top cosmetic work is just for the moment of presentation. Everything that happens after that is just whatever it ends up being. Everyone involved with this project has ensured that the fundamentals, the function, safety, and preservation of every component come first, then they're going over the top on cosmetics and upgrades. And that's ok.

[@Robalo-2660]

@@mircomuntener4643 I don't disagree with you , I've got Alcoas on my 97 Gmc dually , this is the second set . I keep my polished and waxed and at my age, I'm 71, it starts to be a chore . I just don't think Ed would want his bike " all chromed out" . Robbie asked for my opinion that's it . Case closed ,

[@anthonymunoz6013]

Exactly my thoughts!

[@ralphbaker2850]

When it comes to strapping things down, my father always said, "No one has ever lost a load, because they used one strap too many, but, many a load was lost, because they used one strap to few!"

[@jimmyb9016]

POLISH THEM WHEELS!!!!!!!!!!!!!! You have done everything else show quality why stop now! Details are everything! Keep up the great work. 👍

[@jeffsrock9976]

Need to call the rokon A picker The golden nugget and the picker Keep up the good work guys

[@allenpeachy3987]

I vote to clean but not polish the wheels. I would guess that's the way Ed remembers it.

[@larrykraus5645]

Cracked fork full of water, split u-joint boot, broken engine guard, pivots "lubricated by rusty water" - B&B missed a lot of basic items while clowning around. Don't polish the wheels to mirror shiny, just clean them up or try to keep the original finish. It's a work bike, not a Harley. If funds allow, I think Rokon has a sealed replacement U-joint.

[@Mr7yhnmki8]

I don’t think much of B&B.

[@Natures_Barista]

@@Mr7yhnmki8 agreed

[@RyanBorger]

They were too busy figuring out what bible verse to needlessly inject into their videos. Lol

[@robbojr11]

@@RyanBorger he who misseth thy broken fork musth meet thy maker in haste. Forketh failurus verse 1.

[@BrandonJHunt]

B&B dropped the ball for sure!

[@tripjones1364]

Yes polish everything! Everyone wants it back to Ed ASAP but maybe during paint down time you can do the wheels! HB and Robby taking apart the bike show how great y'all work together!

[@wineinbeautifulplaces1200]

What l like about Robby that he doesn’t missed any damage or paint damage It’s like no room for errors.

[@MrRottincorps]

I love the polished look. BUT, if you do the rims you probably need to polish more of the other aluminum parts just so the wheels don't look out of place. In this case I think brushed aluminum rims would look better.

[@csoprych]

jewel it

[@haroldking5392]

Would love to see a LED headlight swap for increased output and lowered power consumption

[@TrevorDennis100]

As long as it looked close to the original.

[@moparman1962]

That truly is a GREAT idea for a useful, more practical, power-saving, gas-saving, modern upgrade to Ed's Rokon that would definitely benefit him in several ways.

[@traviscady8847]

Polishing them would make it look way better when your done…. YES POLISH!!!!

[@brianboyer9557]

Make the wheels shine. just one more detail......you all have made such an effort to make everything so nice for Ed. Love the attention to all the little details. KEEP UP THE EXELLENT WORK.

[@davidmech2956]

Sand and acid etch the wheels. Maybe a matte clear coat . They are just going to get scuffed if used accordingly.

[@lugnuts7800]

Everyone involved in this project is making KZbin history. I've never seen such collaboration on a single (3 piece) project being done for one man. Ed is going to love the results of everyone's hard work. As for the wheels, do whatever you guys want to. Much love and respect to all, and God bless you and yours.

[@ewxlt]

Agreed. The ultimate collab. Let’s hope they finish the project before Ed has the energy and mobility to enjoy it. 🤞🏽

[@MrJest2]

@@ewxlt Given the bit of delay in getting the vids spaced out and published, we're probably only days away from wrapping it all up by this point. Maybe two more weeks at the most I'd think...

[@davidfarmer1666]

Robby, you and your team have truly put the Nugget and now the Rocon as top priority. Once you have gotten each you finish the unit at top priority speed with the highest quality. You should be proud of your team and yourself. Now if someone could please put a fire under Fab Rat to do the same. Fab Rat doesn't appear to have the drive to finish the Nugget like you did. I just want to see Ed get his things back while he is still on this side of the dirt. Thanks for Your great effort and the dedication of your team. You guys and the wife are Outstanding!!!

[@toddhammer7729]

Brush polish would look great, more stock looking. Great work to all and everything you have done for Ed

[@kjdyatta]

8:39 I say no. A nice clean satin finish is the way to go. Thanks for the upload.

[@Joe___R]

You should do a bead blast finish on those wheels. Polishing them would be too flashy for an Off-road bike. Every little scratch would be extremely obvious on a mirror polished wheel & even riding it through tall grass would scratch that aluminum.

[@csoprych]

jewel it

[@lysergic_visions3203]

How much intense off-road riding are you expecting Ed to honestly do on that bike ?

[@Justin5660]

Visited robby today, grabbed some merch. Absolute genuine down to earth dude. Thanks for gifting us some of your time robby.

[@lindagilbreath9740]

I can’t wait to see the moment Ed sees what you all have done for him!! I’m so happy for him already.

[@MrBowser2012]

Brushed finish on the wheels. Polish would look great but doesn’t seem like it fits a rokon. This has been so cool watching the progress on Ed’s stuff. Nice work all!!

[@Farm_fab]

On the subject of zip ties, for those that don't know, the white ones are for indoor use, and the black ones are for outdoors as they have UV protection.

[@charlesjohnsjr.5809]

When in doubt follow that rule but they do make white uv zip ties

[@roymyers8575]

I hope our buddy Ed lives to see all the love the crews have given to this project!!!

[@dougdean3134]

Not sure I see the need to extreme polish the wheels. Clean them up but not polish. This is a working bike not a mall crawler! Love the details that you see to be dealt with and know you will. The excitement of you realizing how the bike works is contagious. Love the channel

[@davidcolesr.8628]

It’s all winding down, looking forward to the Reveal, Ed will certainly Love it.

[@dougberg7746]

If he lives long enough……

[@craigluhr3034]

I actually think only the frame an tank should be gold. The fenders and all the parts that will get banged up should be black. Aluminum wheels just need to be brought back to new mill finish aluminum. Not polished.

[@chrisantoniscountryman-pur9954]

Agreed!

[@michaelh7877]

Agreed 👍

[@vlatraveler9673]

Agree

[@djbarry1695]

Listen to these people, that's the best plan for Ed!

[@schumannresonanceswithverte]

Great video! Thanks for the update. You folks are amazing mechanics and craftsmen

[@christopherbrown6697]

I'd go with vapor blast or slurry blast for the rims. It leaves a good-looking utilitarian surface that won't age as poorly as a high polish.

[@rovers141]

Everyone's saying polish the rims but I think that's a big mistake. Look at who you're building this for, does Ed seem like a flashy kind of guy to you? No. This is an off road machine, give that man something he can ride through the sand and the muck. Restore the aluminum to its original finish but that's it.

[@rodneyschmiede5847]

I agree. Ed is not a flashy kind of guy.

[@mossberg7172]

Cerakote the rims....

[@Kletke84]

Shiny is better

[@andrewk8636]

Fr. Clean it up and sand it with high grit so it has a clean matte finish

[@gordbaker896]

Brushed Aluminium please.

[@bryanburnside9783]

NO!! do not make the wheels shine. It was never intended to look like a silver tea set or look like a signaling mirror going thru the woods. It's a back woods machine.

[@sporttruck5103]

I agree, and that's not Ed's style. He doesn't care about shiny.

[@gordbaker896]

Well Said. Make it so.

[@GldRush98]

I don't know anything about Rokons but I didn't realize until the guys took apart the front end that the front wheel is actually linked to the motor through the frame. For some reason I assumed the front wheel was just an electric motor. That is so cool!

[@IndianaTony]

I like the Rokon wheels the way they are now. It seems more utilitarian and durable that way, which suits it.

[@Rusted_Link]

If I may please recommended that you use the GripLockTies. I've estimated the Rokon's main frame tube to be 3" so a 12" tie should work well. They are reusable, rubber lined and can handle temperatures up to 210° F. They were designed for aviation and racing.

[@Natures_Barista]

That would be the proper way that I was taught when I got my degree in small engine and marine technologies.

[@RPO6464]

That is tough call. The rokon is a work bike and Ed is much older now. I think that polishing the wheel will require constant maintenance and I don’t believe Ed will have the time for that. I would leave it as brush aluminum so that the maintenance to not as high. Just my though though.

[@kevinroberts7158]

The Rokon is a working machine with a working owner, so my vote would be to leave the wheels standard. Great job guys (and girls) Well Done!

[@marlobreding7402]

What I like the most about watching the several off-road Fab / building shops near and around Hurricane Nevada is if you guys all have great love for each other. You show it by the love You are giving Ed.

[@mattknowsnothing]

Exciting!🤗 Don't take this the wrong way, but I kinda like the original patina. Seems a shame to erase all the scratches, that I'm sure have many stories. As it's going to be apart of the golden nugget set peice, it should match the nugget also👍 Though I understand why you are asking, I reckon everyone just wants to see Ed reaction soon as possible. Good luck and thanks🙂 I was surprised you didn't powered coat the trailer in the first place😉

[@jonathontaylor8861]

Yeah but it's going to match the Nugget and the trailer anyway!

[@vtwindad1549]

I'm so emotionally involved in this entire Ed surprise 😅 ever since they dragged the Golden Nugget out of the bush I've been waiting for Ed to drive it again 😅

[@thetank0902]

😯😯 my face when Robby gave us a sneak peak at Matt’s wrecker when his channel is behind haha

[@donaldhalls2189]

It's great to listen to Ed and his tail's his excitement, thanks for bringing us along, all the best to yous and your loved ones

[@etteyafed]

You all have got to get this project done soon. Ed’s going to fossilize before he sees his old jeep and bike again. Good work of course.

[@gmcman355crazy]

This large of a project takes time . Try to do what they have done in the time they have taken and I bet you can't even come close to being half way finished to the level of perfect that golden nugget is

[@reallifehardtruth4465]

Been saying the same thing for months. Ed is elderly and he is fading as we speak. Had some relatives decide they were going to do some upgrades to an elderly member of our family. Got her moved into a condo while they went to work. After many changes and basically taking the place down to the studs she up and died. If they would've simply did the heating and ac, carpet appliances, roof and other odds and ends, she could have enjoyed the last two years in comfort. In things ,like this time is not on your side.

[@madkow007]

ya Ed is not looking as good as he did when this started...sure hope he can do more then just look at it when it's done

[@etteyafed]

@@gmcman355crazy doesn’t really matter what they do in how much time if the old man never gets to see it.

[@bigsmith7349]

Polish them I think that would look amazing with the fresh paint

[@michaelbidlack5739]

Thank you @RLN for all that you're doing for Ed (and everything else you do on your channel)! I love seeing how to do things the correct way (not the lazy/fast way). Your team at RLN is the best! 😃

[@davehedblom5941]

Use 3M Roloc Bristle Brush 2'' Yellow 80 Grit to put a series of round circles. By using a drill and putting downward pressure on the brush, you can make a perfect circle. Move the buffer over and create another. I can send you a picture if you’re interested. Dave

[@jamesglenn2006]

As a previous owner of a '66 Rokon pretty much exactly like Ed's, don't polish the rims. Ed's going to feel bad enough when he roasts the sides of the Golden Nugget against rocks and trees.

[@anthonymunoz6013]

Excellent point!

[@carlholm4264]

This shouldn’t be a shiny poser mobile, it is a tool he uses as intended. Don’t make it something he won’t use. Keep the wheels as is.

[@EarlofBaltimore]

Leave the wheels as is. They weren't meant to bling. Also, the trailer was fine. Unless there was a functional issue with it should have been left alone. I hope you didn't cave because some internet whiners had a problem w/ it.

[@austinh1028]

it looked like they had issues with the paint chipping on the trailer in a bunch of spots

[@EarlofBaltimore]

@@austinh1028 I get that. I just hope they don't change it up. It was looking tight.

[@morbidmanmusic]

It would have been a great comment if you didn't go douche at the end with your "internet whiners". It kinda made you sound like one!!

[@austinh1028]

@@EarlofBaltimore hoping the same colors, minus the chips!

[@old_con]

@@austinh1028 yeah looked like it had gone rusty up front as well. 👍🏽😎

[@sandralutz-rodriguez2864]

So glad you guys are so detail oriented and will fix the loose ends on the Rokon. Not a shiny fan but buffing the aluminum wheels up seems really rad. you guys rock!

[@terencegillespie6675]

Sand and polish wheels. And you take care of that “boss.” She’s pretty cute.

[@scottcummings8074]

If it were mine, I wouldn't polish the wheels. Those scratches will stand out more, and if the trails don't scratch them my tire irons would.

[@RDW303]

I am loving this series with Matt’s, Fab Rats, you and so many others on fixing Ed’s stuff. Ed is going to love all what you all did for him.

[@forrestgould5811]

You should be able to get a new boot for the split one on the u-joint, those u-joints are just hardened steel with no needle bearings in them so keeping them greased and clean is vital, I have a 1975 Rokon Scout that I did a frame off restoration. Keep up the good work.

[@stntmn99]

Sand and polish the hell out of them. Let Ed see the smile on his face when he sees his prize!

[@mattknowsnothing]

Obviously it would look great all polished and matching the nugget, but.... Ask Ed what HE wants to use it for, and finish accordingly:) I sure he wants to use it, and not just look at it;)

[@jonathontaylor8861]

It'll be as immaculate as the rest of the outfit, far too good to take off road but he'll probably do it anyway!

[@madkow007]

well...he did say put pontoons on it and drive it across the lake

[@mattknowsnothing]

@@madkow007 haha yes he did😄

[@dustymojave]

After reading some 560 comments largely advocating polishing the wheels or clear coating them, I say the wheels new were probably fairly shiny, but NOT highly polished. I suggest hand polish with aluminum wheel cleaner, not buff. Ed was excitedly talking about taking it to his mine. Not taking it to shows. It will be beautiful enough. Diamonds and gold will sparkle on a woman. But both together do not make her beautiful.

[@lonhoschar1943]

Nice work!! Getting that Rokon taken apart... it's getting so close to the finale. I'm getting excited to see it presented to Ed!! You guys (everyone who is part of the whole Nugget and Rokon package) are absolutely AWESOME!!!!!

[@jakebrake7054]

Yup. Let them wheels shine, let ‘em shine, whoa, let ‘em shine!!!

[@W1se0ldg33zer]

I had a friend who had a gold Trans Am - it had gold honeycomb rims from the factory. Looked great but eventually those rims rot away and fall apart. He had that happen and he stuck on some shiny Cragar's - totally ruined the look of that car. No shiny chrome rims on gold vehicles - ever!

[@thefuckgoodgame3479]

Hi i'm Drew, I like to comment above, "black and gold" five spoke honeycomb that, the most Golden Nugget inspired design.

[@ExplorationObsession]

Adding my two dollars as a 45+ year motorcycle mechanic, restorer, builder. LEAVE THOSE WHEELS ALONE. The metallurgy used in the casting does not polish well, they formulated those to not corrode. They are in wonderful condition for the age. Anything you do, will look horrible in short order, and coatings will get ruined with field repairs (tire irons) and use. Also contrary to all the comments, the dry carb is fine with the VP racing fuel you used, has all the necessary formulation to prevent problems. I don’t know the marching orders of B&B, but it’s very disappointing that they missed so many critical things.

[@carlholm4264]

Keep those wheels as is, aluminum oxide is hard to beat as a protective coating. Shiny would be a mistake.

[@mancsblue]

Can't wait to see edd ride his bike . I agree with hillbilly the wheels need to be sanded and polished so they shine .plus that shine reflecting the beautiful paint will look killer !

[@LTVoyager]

Running the tank dry for storage may work in a dry climate, but it is death in a humid climate. The tank will suck in moisture during the day/night temperature cycles and rust the inside of the tank. Where I live we try to store bikes for winter with a tank full to the brim and treated with Stabil or similar. This minimizes the space that can suck in moist air and rust. Also, leaving the carb float bowl full helps keep the seals from drying out.

[@lawrencejneuser8801]

All the good things that are happening for ED ,. I hope when the time comes that Ed makes it too the presentation of everything that's been happening for him. I don't know how old Ed is, but I would be considering having things pretty much set up for him before too long of time because sometimes things can get a little bit shorter as time goes on. And I would feel really bad if it all fell apart for you guys. We love him just as much as you do, and you're all our celebrities.

[@cagekicker78]

Right? It would be heartbreaking if things took so long and something like that happens.

[@joeblow5154]

I feel the same way. This project seems like it taking forever. Ed isn't getting any younger.

[@erikthered9357]

I would do a brushed look on the wheels. Polished is just to much work to keep looking nice, especially for a trail rig.

[@RCRitterFPV]

Ohh man... Ed Smile when he heard you rode his ride. very cool. can't wait to see him see it.

[@lakrfan4980]

With so much cosmetic work being done to the Rokon, I vote to definitely polish up the wheels.

[@charleshodge758]

Brushed wheels would look the best IMHO. Great job guys!

[@Joncka]

DON'T polish the wheel. It'll scratch right up, which will make it look in worse condition that it is. Keep the brushed original look.

[@csoprych]

jewel the aluminum wheels

[@TrzCharlie]

You and your team absolutely rock it. Ed is going to be blown away when everything is finished. Kudos guys.

[@Babalon48]

Sounds to me that Hillbilly has never polished a vintage part in his life and just volunteered to block sand that wheel up to 4/5000 grit before using the buffer to polish it up… can’t wait to see it and welcome Hillbilly to the indecisive fraternity of polished parts lovers (afterwards).

[@johnparkerthegimpygardener]

Can't wait for the next instalment . Really want to see Ed get his toys back.

[@sjv6598]

Yesss! It’s Rokon time! Big shout out to team Robbie for all the teams hard work 🤗

[@SMKreitzer1968]

What a grand effort by so many skilled professionals. Nice wort everyone!

[@robertobuenrostro2781]

Shiny Rocon wheels... Wow! 👀

[@walterk1221]

Leave the wheels alone. They were dull when new.

[@ge3186]

I'd say leave the rims alone, or powdercoat them argent silver...they dont need to be shiny

[@JimSealyJr]

This is a good example of having all sorts of easy to lose parts, or parts it’s hard to remember how they go back on. It would be interesting to see you, or maybe Dinner do a video of the inventory process you guys use to keep up with all of those pieces between start and finish.

[@ArkanSauced]

Just got my piece of the golden nugget in the mail. I get so stoked when I get a new video notification on Ed’s builds.

[@raydaly1060]

Those wheels are ment to go just about anywhere I think leaving them how they are would be better cuz the polish will get messed up anyway when Ed goes to his mine with it.

[@anthonymunoz6013]

Two schools of thought. 1. Polished aluminum would be pure eye candy! 2. On the other hand, Ed used to use it to hunt. Flashing his prey animals would not due well for a hunting trip. I would suggest black as the complimentary color. I would covertly find out Ed's plans. He may not hunt anymore but on the other hand, he may not hunt any less. Since the purpose is to please Ed. some more sneakiness may be in order. The seam would apply to the chromed parts. What a conundrum. A show piece or a "go" piece?

[@mattknowsnothing]

Yeah good idea:) I'm for a "go" piece, though everyone loves a show piece;)

[@gordbaker896]

It will be a trailer queen, too good for the bush and rocks.

[@MrGil-bi5no]

Really help Ed and make it a three Weller (not as young as he once was). Love The thought going on.

[@keithparker3414]

I say yes to polishing wheels, super easy to clean and looks mint

[@robd.4319]

HEY Dinner Do you know where captain hook got his hook from? The second hand store.

[@hgj2019]

You are doing a great job, as usual, but please hurry. Ed is older than me, and for us old guys days are numbered more certainly than for younger folk. He needs time to enjoy all these wonderful gifts, and time might be the MOST IMPORTANT gift of all…👴🏻

[@philduoos2961]

It might be too hot in the summer for Ed to enjoy his new toys now - hopefully they'll be done by fall. As my old man used to tell me "Time is fleeting".

[@alanchatterton1978]

Replace that boot on the APEX joint, that older style is like an automotive CV joint, it needs grease and to be sealed up. You should do a hydraulic brake upgrade, also you can add a brake caliper to the rear miter box. If you are rolling backwards down a hill the rear tire can spin due to the drive shaft spring. With no weight on the front you will roll backwards. Make sure that the shoulder bolt shoulder is a little longer than the bushings in the steering. For the wheels I have always wanted to polish them, then anodize. How about some gold anodizing for the Golden Nugget Bike. Another cool thing would be to swirl jewel the wheels. The Power Bee motor was used in just about everything. For the drive shaft there is an upgrade for the spring. That older style can separate between the two bosses. IF it does that the spring gets sucked in and all is ruined.

[@bcslack09]

Retired trucker here. Polish to a mirror finish.

[@markreetz1001]

Shiny Finish might be a bit extreme for an off-road tractor like the Rokon. Great video.

[@edwardnigma2216]

If you're going to brush or polish the wheels, be sure to clear coat them afterwards to help keep them shiny. Ed isn't going to have the time or energy to spend all day polishing stuff, and the clear will also help keep the dirt from building up in the brushed finish as well.

[@csoprych]

jewel the aluminum wheels

[@dttempleton]

Fellas - nothing about a Rocon is precious. Nothing. It's much more of a blunt object. I understand the temptation to polish the wheels, but... brutes aren't worried about their hair or their nails, or if they get a scratch here or there. You made a joke about how the driveshaft "identifies"; I think you'll make an incredibly ironic mistake if you polish those wheels (I'm making a connection to the "identity" of the Rocon). The first scratches that machine gets will be absolutely painful, but they shouldn't be. "Don't make it too precious" is my opinion. But - that's only my opinion - do what you think is best! There's no way you could ruin this thing with polish or paint. I absolutely love your channel. Just an amazing group of guys! I can't believe how much I want the Nugget (even if it's become a bit precious too!)

[@volvobrynk]

Having a hillbilly doing shine, is a pun in its self, but make him do it, lol At my work, we blast Alu items with a plastic grit, so it gets a very smooth Matt finish, that you can wash any dirt of, but it looks pretty. That’s what I would do. ! Lovely little thing! It’s gonna be nice!

[@ryankjensen]

Shine up those rims. You guys are too cool. Thanks for taking the time to make these videos. I'm excited for Ed. I live in St. George and hope to see his complete setup someday.

[@luckyx16]

While it would only take a couple hours to polish those wheels to a mirror finish and it would look way too cool. If the bike were going out on display only, I would say yes, but since your rebuilding it to be used, a good clean up should cover it.

[@csoprych]

jewel the aluminum wheels

[@WCTarheel]

You should record Demri's laugh and sell it as a ringtone. I love it.

[@Stonebonz]

Love your show! love the content!!! I've been watching The Golden Nugget build from the start and just caught this video today. The GOLD seat on that Rokon just ain't cutting it. Not enough contrast imo! Keep up the good work!!!