Golden Nugget: 7000 hrs of sanding. Rokon: Hammer and anvil-Good to go!😂 Strong work! I can’t wait to see Ed’s face.
@cigarsgunsanddiesel80322 жыл бұрын
I just hope the man doesn't have a coronary when he sees it!
@900ruffryder2 жыл бұрын
couldn't have said it better all that work and great paint on a bent up fender 🤔
@MrZZeroG2 жыл бұрын
I’m glad you’re giving Ed his hitch. There’s a chance the factory hitch broke and he replaced it. Good call and amazing that someone sent in the original as well!
@gavinredding29092 жыл бұрын
Well their isnt " a chance " he very clearly has a replacement as he didnt have one due to breaking it and replacing it, or he lost it and Still had to replace it
@chrisj27132 жыл бұрын
He probably built it so he could haul insane amounts of mining gear up mountain trails. I bet he's gonna be mad it isn't on the bike, then he'll bolt it back up as soon as he gets home
@inmyopinion68362 жыл бұрын
@@chrisj2713 He is going to be SOOOOO overwhelmed, he will probably have a stroke and admire it from the great beyond. But I sure as hell hope not. More Ed stories...
@haydnjenkins76072 жыл бұрын
@@gavinredding2909 pppppp
@haydnjenkins76072 жыл бұрын
@@gavinredding2909 pppppppppppppppppppp
@davidward77812 жыл бұрын
You can tell the people around Robby respect and care for him. That was created long before KZbin. I personally hope this crew never stops filming its very entertaining and informative 👍
@dandexinventor2 жыл бұрын
1981 my aunt gave me a '68 Charger for my 18th Bday, but I'd signed up for the Marines, so after thanking her a million times for such a huge and amazing gift, I told her I could not keep it, at least until I completed my 4 years, then I could be sure to take care of it like it should be. While in the Marines, her and my uncle divorced and went their own ways. I felt bad for her and never did ask about the Charger again thinking she needed it. You reminded me of that, Robby, so thanks! I have great memories of that time, my aunt and uncle, and the Charger.
@thirzapeevey23952 жыл бұрын
I hope the folks from Rokon are watching this. I had never heard of Rokon before this project, and I hate motorcycles, but now I want one of these. I don't want a new one, I want one like this. It seems to me this could build interest in their project, and maybe they need to go back to the well and make one just like this. I can see these being hugely useful on a small farm.
@paulriversred70522 жыл бұрын
I'm glad dinner is always thier idk why but I feel like this has changed his life and made him alot more happier glad he has good true friends like y'all.
@kevinwalters76152 жыл бұрын
It's dinner time ....... no but really dinner is a big part of this channel
@jeraldhite97442 жыл бұрын
Dinner seems like a good hearted guy. Glad he has great friends!!
@donr4162 жыл бұрын
Dinner's on me.
@thebrowns53372 жыл бұрын
@@donr416 what, now?
@scottspann86242 жыл бұрын
You guys are the gods of this world. Did not think there were people that think like I do. I’m plumber and try to help people out especially the older folk every chance I get and if that means making zero money it’s worth it to help out the people that really deserve it in this world. Great job guys roby Matt and fabrats plus many other that made it happen you are all special people in this world!
@Adrian-Pryke2 жыл бұрын
I think I laughed a bit too much when you left it in reverse for the burnout at 7:00 🤣🤣🤣🤣🤣
@RobbyLayton2 жыл бұрын
I was just making sure it was capable duh 🤣🤣🤣🤣 1st and reverse are on the left haha I was too excited and hit reverse again
@SK8VE2 жыл бұрын
You need a Matchbox/Hot Wheels version of Ed's Jeep & Rokon in the merch shop!
@FRACTUREDVISIONmusic2 жыл бұрын
Wow, it's amazing how the Golden Nugget sent your subscribership through the roof in less than a year. You've come a long way quickly Robby Layton Nation! Looking forward to your next projects.
@plunder19562 жыл бұрын
II still can't get over how that gold paint looks as a liquid, the gold is SO rich. That TIG work was so fine, you have some talented people involved on this build. Every time I see Robbie lay down some paint I'm amazed how smoothly he moves - It's an art baby!
@scottimusgarrett152 жыл бұрын
Robby, you did an EXCELLENT job painting the Jr. Nugget frame! It's super-hard to get a coat of metallic/candy and clear to look even, and with no runs. Again, excellent job, and thanks for all you're doing for Ed! ✌️❤️🙂🇨🇦
@alext95402 жыл бұрын
All shops should run like yours, everyone is appreciated for their contributions, and above all, you have fun! Love watching (and learning from) your channel-
@peterbarber76132 жыл бұрын
Alex T. If all shops were run like that they would be broke
@kevinsworld.70862 жыл бұрын
I can't wait to see you hit a million Robbie if anyone on KZbin is deserving of more subscribers it's definitely you. You're a great person and doing a great deed for Ed out of the goodness of your heart. Love watching your videos.
@Gantzz3212 жыл бұрын
never happen, large section of sub's are here for Golden Nugget and don't see any reason to continue watching
@KoltFin2 жыл бұрын
He's a decent dude but you will not see anything on KZbin from him that he doesn't expect to profit from one way or another
@kevinsworld.70862 жыл бұрын
Rightfully all the money he invest for free he should be able to profit using KZbin. That's the whole end goal of starting a channel anyways.
@RamenPoweredShitFactory2 жыл бұрын
@@Gantzz321 He gets several hundreds of thousands of views on videos that aren't related to the Golden nugget build. I see him reaching 1 Million subs but it will probably take a few years.
@tyendor19522 жыл бұрын
@@Gantzz321 100% true, I only put up with the childish jokes and skits because of the nugget & rokon. Once they're gone there's no reason to be here.
@detroitdiy2 жыл бұрын
Awesome job guys, I think Ed will be overwhelmed by what you have done.
@thebrowns53372 жыл бұрын
Have a medical team on standby!
@robmitchell44172 жыл бұрын
That gold really comes to life with the clear coat. Ed will love it. Great job. 69 charger is also my favorite car.
@jeromestrong56142 жыл бұрын
It's looking Awesome!!! Can't wait to see all 3 pieces togather. And then the look on Ed's face will be priceless when he gets them back. Keep up the Awesome work. Just want to say Thanks to everyone that's had a hand in getting this done for Ed. God Bless.
@AndrewThevarajan3 ай бұрын
Impressive attention to detail; extensive experience and expertise....what a combination!
@berlynreed42532 жыл бұрын
I gotta also say Ed is gonna love all you guys for all the work on LJ20, Rokon and the trailer! Thanks to Layton Auto Body, Fab Rats, Matts Offroad and Chad's Fab!!!
@1one3_Racing2 жыл бұрын
Yeh. He'll be like "is that MY Suzuki?" And they'll be like "yeah. Well, it's a different body. And different engine. And different trans. And different axles. And all the bolts and glass are new. But the passenger side door latch is yours!"
@imbadwrench2 жыл бұрын
center drills are dirt cheap on ebay and really good for drilling small holes in thin material.. they do not break as easily as small drill bits will, plus they chamfer the hoels because of the shape of the drill.
@robertwilliams76262 жыл бұрын
You do really great work Robby ..and you don't cut corners. Love the content guys.
@BrainsofFrank2 жыл бұрын
I finally went and watched the crew from Matt’s off road recovery get the golden nugget from where it was “parked” for 40+ years. Holy crap! It was a hard and intense recovery ! I applaud Matt and his crew for doing this job
@kennethheying78452 жыл бұрын
I remember as a teen. Ridding in my friends 70 Chargers. Gold in color. 100 plus mph to everywhere. They are awesome. Nice to see Ed's bike getting painted.
@beaker63752 жыл бұрын
Nice job yall. My wish would be to see Dinner receive a Super gift. He also deserves it, dont you think?
@aglenrios2 жыл бұрын
Robby with a positive message and an awesome paint job.
@Kickinpony662 жыл бұрын
Nick's a great guy! He let you come back! 😁😁 That has got to be the simplest fender I've ever seen.
@roelien77792 жыл бұрын
Robby, you and your team is the best! Demri, thanks to you and Dinner putting smiles on our dials 😊
@kentuckyhiker70712 жыл бұрын
Man you all are kicking ass on this whole series!!! Great job once again and I cannot wait to see everything completely assembled and ready for Ed!! He is going to be totally BLOWN AWAY!!!
@stopbeforethetop2762 жыл бұрын
So good to see proper equipment and proper proces being followed. Id like to see how you choose the place to hang objects when spraying!
@LoveoldcarsCutlass2 жыл бұрын
I always love seeing the charger in your videos and seeing how the spray paint comes out
@randytingen2 жыл бұрын
Can’t get enough of Robby Layton Nation
@caesar12952 жыл бұрын
Awesome job guys! You all always go the extra mile with the work you do. Robbie you have got a great group of people working with you always take care of them and they will take care of you and your family. God bless all of you, your all an inspiration for your generation.
@ReNeu602 жыл бұрын
painting frames in my life of spray cans is very much harder than painting flat surfaces. I always get runs, probably get runs on the flat surfaces too. You have skill and patience to make it right.
@christopherbrown66972 жыл бұрын
I just brush paint frames at this point. Most quality paints level out surprisingly well and look good. Spraying propels most of the paint everywhere but the frame.
@jerrymestas12312 жыл бұрын
You guys are kicking ass on this project. Can't wait!!! I'm hoping everyone that has touched this project will be involved in the unveiling👍🏼
@johnb78892 жыл бұрын
Put your blast cabinet up on cinder blocks so you don’t have to stoop to use it. 👍🏼 Great job as usual!
@f250man212 жыл бұрын
I can't wait for Ed to see all this for the first time. He's going to be shocked. Also that charger is going to be amazing. Definitely need to keep an old school look an paint on it. They sell newer instrument clusters to look just like the old but with modern electronics a long with all kinda parts like newer led lights.
@timkaldahl2 жыл бұрын
Thanks. Just keep rubbing it in that you have a 69 Charger and I don't. Love your channel and your whole cast of characters. I also can't expressed how much I appreciate the ethos of you and your crew. Actions consistent with expressed values.
@clydebalcom36792 жыл бұрын
Who'd thunk that this entire project would have such a following. It helps to have such an amazing group of KZbinrs having some good, clean, creative fun.
@skipwalls34202 жыл бұрын
You guys do the best videos of anyone I follow, wish you could do more.
@subvertedworld2 жыл бұрын
I'm super excited Ed is getting his stuff back this month!!! YES!!! Now everyone KEEP YOUR MOUTH SHUT until Ed gets his stuff back! I'm literally beaming over here. Can't wait to see Ed's face.
@doncyr33322 жыл бұрын
Info for next time on welding and brazing. A decent gas weld on mild steel is a 70,000 pound weld. On clean metal like you have, with good rod like you showed, a decent braze is good for 60,000 pounds. Good enough for what you are doing. Love the build, keep up the great work.
@TheOldaz12 жыл бұрын
Painta and frame look great, it will be the worlds most beautiful Rokon. The whole outfit will be ready for shows when it's done.
@taznz12 жыл бұрын
Have you thought about using a can of rust converter with an extension nozzle to treat the inside of forks, since they were full of rusty water? It's a pity your under a time crunch and didn't have time to hammer and dolly the dents in rear fender, the gold really makes them stick out. Can't wait to see the finished result.
@hotdrippyglass2 жыл бұрын
My compliments to the video and audio mixing crew! Good choices on the background music as well as volume and silence choices.
@sandralutz-rodriguez28642 жыл бұрын
the Rokon is going to look so awesome! your attention to detail is awesome Robby!
@pnwRC.2 жыл бұрын
LOVED seeing the '69 out running errands!
@dmorgan282 жыл бұрын
Ed is going to be so happy to get this. You’ve done a great job on it. 👍👍👍❤️
@jamiesworkshop31982 жыл бұрын
Can't wait to see the grand unveiling!! You guys are incredible!!! What a special moment that will be!
@berlynreed42532 жыл бұрын
Love that Charger! Same color is perfect! A General Lee in the making! And I probably live no further than 40 miles from the original owner in Wyandotte!
@paulkdondero96622 жыл бұрын
You can always tell who does the most painting...fast and smooth,us second string painters go a little slower to get it to flow out properly,dude with the culdesac cut went to the same paint school,and has same barber as me,its fun watching othes work...lol
@brianbradley67442 жыл бұрын
I've often wondered what percentage of the paint spray actually goes onto the metal and what % goes into thin air.
@RobbyLayton2 жыл бұрын
It took 56 ounces of base coat and realistically about half of that made it on the surface
@timoy49882 жыл бұрын
@@RobbyLayton at least the exhaust fan blades are getting that love as well. Nice work sir!
@marinusdedreu38332 жыл бұрын
When painting tubes and cage like things there is a lot of over spray in order to get coverage. Bigger surfaces will have less over spray.
@billhorterjr19822 жыл бұрын
Robby, you guys have the BEST videos! Awesome skills and super attitudes! Top Stuff!
@brewdogg772 жыл бұрын
I was born and raised in Moroni and was confused about Shalans at first. Then I saw the building that used to be Biggies. Man I guess I need to visit my family more often. My uncle Paul and his kids all run Anderson Junction. BTW my dad and his family are all from Ephraim. Sanpete Represent!!!
@daffyduck99012 жыл бұрын
12:21 I had recently retired from Media Blasting and painting water towers for a living. A older gentleman that used to be in the field and then went to paint rep, inspector and finally NACE instructor. Told me do a good prep job and always follow the technical data sheet and you can't go wrong. 🤙
@ecka4x42 жыл бұрын
Looking amazing guys. Your work is next level. Can't wait to see them all shining in the sun together. Definitely will need to wear shades.
@birddog4352 жыл бұрын
You guys have put in more work on the Golden Nugget projects then anyone. Also you will be the only ones that work on all three components. The LJ20, Rokon, and trailer!!! You are doing a great job and thanks for sharing the experience.
@rickkinnison95732 жыл бұрын
That clear makes the gold pop. Awesome work.
@waylonrobinson67982 жыл бұрын
You guys are the tops! Will be ordering merchandise on Tuesday
@darrinstone492 жыл бұрын
You should have Dinner learn to Tig weld. It's an amazing confidence builder once you learn & perfect your skills. Check out Mr Tig, he designed his own sweet little Tig welders with alot of features. PS he use to weld for NASA & still donates his time at all the major car races like Indy & Daytona.
@christopherbennettii484 Жыл бұрын
Really like the Golden Nugget custom trailer & this Rokon Trailblazer with an original tow bar only price I've seen that is missing is a little hood chain guard for the top of the front chain but I haven't seen one of them with it in a long time
@boolongfellow84522 жыл бұрын
The burritos, the burnout and the rokon all look awesome 👍
@rogerbakke98562 жыл бұрын
nice to see people doing things for elderly people good for you guys
@SchysCraftCo.2 жыл бұрын
Awesome work guys. Can't wait to see more videos soon.
@HogshooterHotrods2 жыл бұрын
Glad to see the progress, 1/4 way to 1M subs, that is awesome man!
@Chaplain_GM2 жыл бұрын
LOVE YA ROBBY AND CREW FOR ALL THAT YOU DO!!!!
@rainwatercold15072 жыл бұрын
U know the first thing Ed is going to ask, is where is my rear bumper... 😆 it's an accessory for it now. Very cool.
@dalejohnson15552 жыл бұрын
Love that you shout out local businesses! I will have to try Shalan's when I am out that way. 19:08 This is a good one!!!
@CarswithNash2 жыл бұрын
Nice work as always!👍
@richardhill48622 жыл бұрын
I think you should brought Dinner and I a breakfast burrito. Nice burn out! You guys do great job, I've been watching the Fab Rat's boys work on the Nugget and what you did on it made it awesome looking. Beard and bikes did a nice job of overhauling it and making it run, and now it have style. When I was kid, I would get Tonka truck for a Birthday or Christmas that would have a trailer with bikes or a boat attached. Your whole project kind of like that on a full size level except for when you watch Paul try to set in the Nugget.
@terrallputnam79792 жыл бұрын
I can't wait til you get 1,000,000 subscribers! You keep up the good work and you will get there!!!
@southsideronnie2 жыл бұрын
This is looking sweet! Nice job Robby and team!
@peterfernandes86112 жыл бұрын
Robbie and gang you did an awesome job on the Nugget and the rocon. Keep up the good work and good content. It's going to be out of his mind when he gets his vehicle back. 👍💯💯💥💥👌
@spdergod2 жыл бұрын
Cool tip on drilling the crack. Learn something every day. I think stat-gun should sponsor you with how much you love their product.
@rickday5012 жыл бұрын
It is going to really love that recon especially when he sees the Golden Nugget and I see that Paul's almost done with that too so you're probably close to them being with that recon too I can't wait I watch all your guys' episodes Paul's mats yours too Robbie
@rickday5012 жыл бұрын
Forgot to add I finally got to learn how to describe I didn't know I could do it on the new phone now I get to see you finish that new charger then are you still going to do any demolition derbies
@reddog5432112 жыл бұрын
Awesome video guy's....literally made me lol several times....great job showing what it actually takes to make something look better than brand new
@davidmech29562 жыл бұрын
Coming along nicely! I really am enjoying this compilation. Good on ya'.
@paulineroyadair35052 жыл бұрын
love the way you include every one .Roy
@waynesligar59482 жыл бұрын
I've enjoyed watching your channel and I'm glad Matt showed us about you
@Jizden_Mipanz2 жыл бұрын
I loved the petes dragon bit. (Shaky voice) right here!!!!!!!
@BrentGossard2 жыл бұрын
I saw the charger in Nephi last week. Love the way it looks right now.
@franoswald64032 жыл бұрын
I WANT that Charger! Hope you get the subscribers! You all deserve nothing but the best!
@codysansom67792 жыл бұрын
I’m glad to see someone drilling the ends of cracks before grinding on it. Just another example of high quality work.
@1a1u0g9t4s2u2 жыл бұрын
Broccoli, that was funny. The Rocon is looking great. Thanks for sharing.
@johnfnielsen50682 жыл бұрын
You never fail to impress, Excellent work
@brianbailey57202 жыл бұрын
Glad your part of the project is almost done!
@karenminard24642 жыл бұрын
Need to see dinner more often he’s just awesome.
@wtfover49312 жыл бұрын
I'm over this build.
@ITGuyOhio2 жыл бұрын
As always, Amazing Work. Loving your content
@russellbluewolf64272 жыл бұрын
Robby if there is anything ive learned from watching you, is that some things are best left to professionals. like body work..but man you sure do make it fun to watch! some of your antics make my whole day better..thank you..
@donaldfrazier52442 жыл бұрын
Awesome job Robbie and co, ps that charger is going to look great in my driveway!
@johntimm72652 жыл бұрын
The charger looks great going down the road.
@nataliehunt11252 жыл бұрын
Thanks Nick !!
@allansisson355 Жыл бұрын
Love these videos I'm going to go through every one. I've only seen a four but outstanding work. I can see your heart is in it. I've subscribed
@spacebike4202 жыл бұрын
Watch out welding right over the cement floor like that you can make it pop and put holes in it!
@jimmyshadden62362 жыл бұрын
This is entertainment at its best. Thanks guys...
@Thesuperlate2 жыл бұрын
Very cool stuff! Kinda wish you would have went with the Rokon OEM yellow and saved the gold for the 69. I’m sure that’s only because I’m a Rokon collector tho and like to see all of them restored to original. Either way it’s turning out great as did the nugget. Keep up the awesome work Robby and crew!
@montegtaylor2 жыл бұрын
You are doing an awesome job!
@torinobob2 жыл бұрын
The reveal with the 3 together is going to be a stellar day.
@4Runner1232 жыл бұрын
The amount of work doing a restoration like this is just insane! Great job showing us all how it’s done. Ed is going to love it all can’t wait for his reaction 🤫
@SillyPutty37002 жыл бұрын
If you ever want to clean out a 2 stroke exhaust put it in an oven in clean mode. It will stink like hell but it turns the old baked on oil and carbon to a fine gray ash that just falls off when you tap it.