We've Been Trying To Reach You About Your Car's Extended Warranty

[@DOITWITHDAN]

On a side note: I have no idea why I thought George Lucas' wife played or was inspired by his wife... Don't know where that came from.

[@blake1995]

Smoking too much pot Dan

[@cadenspiller5922]

Lmao

[@maxhalo3odst]

what if ya maybe should have put the vent over the toilet area. get the stink smell out if ya know what I mean, love from Sweden

[@ProjectCarTV]

I bought an extended warranty on a 2005 Audio Allred last year. It had dual Garrett GT3076R turbos and dynoed close to 1,000hp. The warranty covered a new transmission and all four axles. I paid $899 for an aftermarket warranty.

[@tickandslug]

@@ProjectCarTV who did you go through? That's a great deal

[@Obro03]

This title has me dying. I don't even pick up the phone anymore because of these spam calls

[@emersontrench1354]

same bro instant like

[@quailerfreak8966]

So thats why you never answer my call😭 I juss wanna hang bro😕

[@Obro03]

@@quailerfreak8966 that's why you gotta leave voicemails, or call 911 if it's an emergency

[@cl5221]

I use to but last time I got one I went thru with it. It was an Indian man who answer and he transferred me to a woman with an “American” accent. She asked for my phone number and I gave them a random ass one. Haven’t had a call since. I also made up a car that didn’t exist and they accepted it 🤣

[@RubyXIII]

my brother got a call she asks for a car he says one second and she hangs up instantly scam callers need to obliterate their existence

[@HawkEyeMonkey]

Thumbnail was like: *Herrrreeee's Dan*

[@thenieuwproject3643]

*heeeeeeeeres Danny!

[@Jake_Productions]

a suggestion that may save time. flatten all the tires and the ac might fit out the door.

[@BAK3D]

As funny as it sounds you are probably right.

[@2koolchris291]

Oh maybe take the brakes off and run it on small rims with no tires. That’ll work.

[@juana9650]

now thats thinking out of the box!

[@quancast1141]

@@2koolchris291 then you gotta bleed the brakes ughh

[@gamingtoaster6879]

Or lower the car

[@jsanders4706]

Clicked immediately after reading title. That shit was golden.

[@moonladd4083]

Would you make a DIWD spotify playlist? I've seen nothing but bangers from the Boy$, Pouya, T-Wayne, Bonus Points (insta story), and I need a Dan-approved collection

[@AGPullen]

30:43 I got ALL those references 🤣

[@LaPapaMollido]

Just as a heads up; Black wire is live, white is neutral, and green is ground. Either way, this thing is shaping up into a nice rig!

[@MrIggybo]

Sometimes also white or blue for neutral and brown for live. Generally the stronger darker colour is usually live. I just lick it and see which one hurts more. Disclaimer cause some of y'all barely passed kindergarden: Please don't lick potentially live wires.

[@DOITWITHDAN]

Many different kits have different color wires for different things. These were what they were listed as for the air conditioner we have.

[@devinpyrchalla3400]

@@MrIggybo what about ones I’m pretty sure aren’t live ?!?! Cuz they taste pretty good ngl

[@noknet]

@@DOITWITHDAN green and yellow is ALWAYS ground, at least in European standards.

[@sleazy4048]

100% the black wire is marked with a L for line, white N for neutral, green G for ground

[@austinrode3974]

11:35 absolutely floored me. The amount of times ive thrown the cord i needed and had to go get it shit was hilarious

[@tamkat6242]

Hey Dan don't know if you will read this or not,but I just wanted to say that I've been watching for a lil bit and just recently went all the way back to your early days!! I just want you to know that you are HANDS DOWN one of the smartest young men that I've ever got to see do things! I love the fact you do things that you've never done before! Also I'm so glad you have finally gotten the I don't give a fuck what people think or say, because I like it and that's enough!!! I think you are a great role model for the young generation and keep up the great work!!!!

[@basbone8592]

The last time I was this early this girl walked out laughing.

[@tinncan]

I mean you finished so....

[@BAK3D]

You won the race.

[@johnfranks7383]

Still clapped tho

[@ryanslater1800]

Dan! Been watching you for years! I’ve been an RV technician for years and I recommend you use Dicor Products self leveling lap sealant on everything for the roof. Silicone WILL peel and WILL leak. The self-leveling looks really good when it’s done too.

[@jasperreese4497]

Hey Dan, love the videos! I’ve been an aluminum welder/fabricator for years now. Best way to cut aluminum is with a plain skill saw (I remove the blade guard, just to make sure it’s OSHA approved) and a regular general purpose blade. Won’t get any cleaner cut than that. Also, when you’re welding with the spool gun you want to “push” into your weld not pull and drag. That way the argon or argon/helium can create the proper ozone in front of where you’re welding not behind. Keep up the sweet content man!

[@justmrs1mps0n58]

Came to this channel for the bike content, stayed for Dan. Every video you put out, be it bike, truck, car, gun, or gaming... your content is always amazing. Especially when you be a goof when building an RV ambulance. (on a side note, it's amazing you get anywhere with all the fun you have when cutting shit) hahahaha

[@christiann.1348]

I honestly haven't been on this build super hard but this was a really good video you can tell yall got some rhythm now

[@dappermanphoto]

"Like nobodies ever there to see you plug in the USB first try." i felt that.

[@dwilly2037]

For the ceiling... you could take a board cut pieces, screw to the metal and then fasten the plywood to the pieces of board

[@rippingblunts4206]

Thought this was an ad until I saw who posted .... covid can’t even stop them from trying to scam 😂

[@EricMPeek]

Dan your content is underrated and by far the best there is on KZbin

[@jonathandehart4947]

Just wanted to let you know the fan opening is 14 x 14 I also recommend not using silicone for sealant breaks down to fast I recommend Sitka flex 515 or flexible sealant by tuff dog if you have any questions about campers or anything feel free to contact me I build campers and canopies for a living

[@JLaceRap]

Even using all the wrong tools for everything the fitment was spot on 👍🏻 a++

[@jacobm578]

“No one’s ever there to see you get the USB plugged in on the first try” that hit home 😂

[@BAK3D]

On a side note. Great content as always Dan. I love the fact you surround yourself with positive people.

[@Softairplayer99]

For real I love your channel because your content is basically always what's going on in my life. From bikes to cars and building shit my own. Battling car builds for the first time and having fun with friends. And then there's you. You're the best! I'll follow you on your journey and the way you wanna do videos from now on. I'm excited and wish you all the best. Stay healthy! Greetings from germany!

[@chickensfloat7427]

1:39 looks like your scraping a damn cake off the ceiling 🤣

[@jasonwehrling738]

All I would do is run a 1-1/2" strip of wood over the seems. You can make it look good with oak, cherry, Walnut or what ever he thinks will look good and match it to your trim. Keep up the good work and videos.

[@Efird100]

A word of warning with the air conditioning. You will most likely need to run a dehumidifier because of the size of your unit. Sense it for a larger area than what you have it will cool the air down before pulling the moisture out and make it condense on the wall.

[@conradcoetzee7586]

The more work you do on the ambulance the more excited I get. Looks really good so far.

[@mikebillman3026]

I believe the great Dan himself once said “I’m too drunk to taste this chicken”

[@wildncrazylife3570]

Future reference: that thin plywood can be cut with a razor blade pretty easily. No dust and make cuting around things real easy and clean

[@LovableShelf729]

Adds one a few wood panels. “Wow. It’s really coming together!”

[@fixture3434]

Love and appreciate your can do attitude when you take on a myriad of projects like this its inspiring keep it up man

[@rektautomotive3483]

I would use an offcut of the plywood and slip it above the sheets that aren’t flush if there is space up there, then you can screw both sheets through to the offcut to hold them flush 👍

[@joewolfer5735]

I’m so glad there’s finally a project getting done lol

[@evanpelkey7864]

Ya know Dan if you do need to pick that ac unit up to the roof you could probably use your lift and either pull the van next to or under the lift if it would fit so you can just grab it off that

[@scitautemotorider]

I know you love your sawzall Dan but you should really try a cordless circular saw with a Diablo metal blade. It cuts waaaay smoother, straighter and faster than a sawzall. Especially when there’s multiple layers of material to cut.

[@sunvalleyrider5790]

I'd take the panels down and fix/fill all the foam insulation, then use some liquid nails to reattach the panels and get a nice consistent curve there.

[@VisualMediaProductions]

Im enjoying watching this being built, looking forward to seeing more.

[@ericmarchand7432]

Not trying to tell you what to do but as you put the wood up you may have wanted to put some sort of sealant between the wood an supports just because as you drive down the road self tapping screws almost always loosen up

[@jamessemple4897]

What about adding some sort of clamshell tent on the roof for sleeping above the ambulance. It would allow more space down below.

[@decket8842]

Guess what start up car manufacturers say is the most difficult thing to work around? Trying to make everything not make a lot of sound and jiggle around. Might wanna look into putting padding underneath panels👍

[@General_Shenanigans]

30:57 love the Red Vs blue reference.

[@garthweatherall-thomas247]

Good ol' chilled atmosphere, happy vibes type of Dan video :D

[@janssonski4714]

Dude, the yellow and green striped wire are ground in europe. Just wanted u to know

[@johnathonscheurer1233]

Green anything is never anything other than ground in the US

[@lftd_stx]

That ac unit for the ambulance may cause mold since it is oversized. It will make it cold as shit, but when the unit is oversized it will not remove the moisture like it should.

[@RYANo_Moto]

Progress! Ceiling turned out nice. I would definitely stain it with a dark walnut or even black stain and poly mix! 😎👊🏼

[@miguelcolon9858]

Great vid Dan

[@Josh-db8rf]

Cant wait to see Dan's projects come together

[@joeythompson7539]

Hands down favorite KZbinr 🤘🏻🤘🏻

[@phatkidd100]

I really dig this build series, great job guys

[@jaretaustin14]

Put roof rack on the lift, back hambulance up to lift. Slide rack onto hambulance if it wont fit under lift with rack on it

[@Dispellzz]

That "It" part had me dying.

[@murraybanks8770]

Love seeing dan back having fun and making progress 👌

[@nstg8]

Probably too late, but you should really weld in a plate where you cut into the roof ridge to get as much strength back as possible.

[@AB-zc3fz]

Yes, I have a 1902 BMW GTR Id like to add warranty to it

[@austinstroud6423]

on the wood where the cracks are you could do strips of trim

[@jtf881]

Loved the video!! Great way to start the new year with this high quality content

[@DALE226]

30:58 LMAOO Had me and my friend rolling. Got em

[@megamiteexplosion]

y'know what you just made me realize? I can easily wire, bridge, splice in, do whatever I want with things that run off DC but I have never even heard of a neutral wire and have absolutely no clue how AC even works lmao

[@ervn2466]

If you want those boards to be flush put a board above both of them and screw into it. That will level them out

[@sonicnyoom7283]

Just weld a lil bracket up above with a screw hole? To flush up that board? Like a C bracket

[@Jokersaliveskullboy]

Laughed so fucking hard when he threw the extension lead away

[@jts1112]

8:08 : I like ya cut, G

[@ryanwithab6239]

The thumbnail and caption are perfect!! Made my day!

[@thesilverbulletninety3021]

that ambulance is coming together nicely

[@116RonH]

30:10 Sometimes it takes me a few tries to get that there USB plugged in, I tell you what.

[@TheEpicDuck23]

Best build series

[@kooterbuilt3039]

I get those calls and I love tellin them mines 40 years old😂

[@IISTAGII]

I really appreciate this channel.

[@djmoya4886]

I love the energy in this video

[@CrazedHacker]

Not dogging on ya, just an FYI. Rv manufacturers use whats called butyl tape for roof hatches and the like. Keep it up man, im excited to see results

[@BaDdAwG750]

Btw the green yellow wire should be you ground where black is hot white in neutral

[@johncanale3454]

Title has me dying. Instantly liked for that.

[@3mp7y1995]

god damn this video was so fucking good. keep it up boys

[@joshgibson1982]

Loving the energy level of this keep it up dan

[@Zorbii]

Dan makes me want to buy and ambulance and make it fast as fuk boi

[@edwinwx260]

Follow zorbii

[@montgomeryjordan4231]

This time on Do It With Construction Man, we build the ultimate Slambulance.

[@austinbekkelund7807]

Hey bud just throwing an idea out there but to make it look better on the inside where the seams are put a piece of trim

[@cwd1232]

Awesome!! Making some good progress!!

[@knox8962]

The roof is looking great!!!

[@nicholasbrown6481]

They make a caulk for the roof of campers thats 1000% better than what youre using. Its self leveling also. And the small amount of black rtv wouldn't do anything to absorb heat.

[@TerrorBunney]

nice video! lots of progress. all tho as an electrical engineer i gotta say that green/yellow is mostly ground in electrical systems. white and black are switched around a lot and doesn't really matter with ac anyways. I saw at another comment that the kit said to use yellow/green as signal wire? sounds weird to me but hey who am i to tell you that's wrong ;) Have a nice rest of your week Dan!

[@DOITWITHDAN]

The unit was labeled on the wires themselves and in the handbook. I guess I didn't mention that?

[@TerrorBunney]

@@DOITWITHDAN i just looked back in the video and if you pause at 19:54 you can see the labels on the wires. L = phase or hot wire, N = neutral or zero, but you are covering green yellow with your thumb so i cant see😁 Not trying to tell you you did it wrong tho. Just pointing it out😉 EDIT: If the manual specifies it to be different tho you can forget what i said. I have also checked if everything i know is the same in NA on this wikipedia page: en.m.wikipedia.org/wiki/Electrical_wiring_in_North_America

[@JamesKlyng1twofish]

You should get some dicor instead of silicone. Its made for rv roof joints.

[@ignacio8597]

If you oversize the ac it will short cycle and not remove humidity.

[@samuelrowland76]

I’ve gotten 41 of those extended warranty messages for a Ford Taurus, a gmc 1500, and a fiat 500e, but I don’t even own any of these cars.

[@djwilliams4714]

Is that stranded wire you used for the AC going to be the correct AWG to run an AC?? Or does it call for solid wire?

[@ethantate4]

Y’all need to replace the ac unit with one with the correct BTUs or else it will be a cold temp it will just be really humid

[@ericvillar3971]

I do spray foam for a living. There is no correct way. You just find what ever works. 🤣🤣

[@roseforkayle2655]

so cool to watch it finally start being built and not destroyed lol

[@Cjarvis1136]

Hey dude, eorking in flooring in atl/buckhead or almost 15 years. Outside of some tile and wood jobs at times, flooring should always be last. Not everyone agrees but I usually insist with with my designers and stuff I be the last guy in on any of the high end projects. Anyway, Awesome vid man! 👌

[@puddinface555]

it may be a dumb question but why not just use a 6 inch cutoff disc on a metabo to cut the lines fir the ac unit figure it be easier

[@pennywise8579]

14:24 perfect 👌

[@AquaticBabysitter]

Best present after an afternoon nap!

[@loganclements7961]

I straight up want to build some shit now!

[@colefocht1210]

Put a piece of wood between the two with the gap and screw both of the pieces to it so its flush to the piece you added

[@ItsTheFat0ne]

Bro ham should do like a lowrider crush velvet roof with the buttons... fucking class good ol rollin stabbin cabin

[@chiefquief7526]

Dan the fan man

[@ClassicInsanity]

Don't forget a fire extinguisher install!

[@bmwrider1931]

Looking good boys.

[@jadenhawkins6056]

Should’ve done the Home Depot theme music while doing the woodwork