Not gonna lie: I let out a very unmanly giggle right off the bat. "Hi, I'm Mike with Make." Yeah, I think it's bed time. Also, this is probably one of the coolest projects I've seen on here ever. It's a great way to show kids how you used to load programs into 8-bit computers using cassette tapes.
@mheermance9 жыл бұрын
This is similar to the scara robot I built, but I like some of your alternations. So I'm building a mark II using them. Specifically, I like the built in work surface which means that the robot retains calibration between each use. I also like using the batteries as a counter weight to the servos. The skid in the forearm is a great idea to because it means that the pen tip has a nice even pressure across the page.
@runnerup1510 жыл бұрын
I'm so building this on Monday! Hooray for employee discount!
@AchronTimeless10 жыл бұрын
Use a haxor?
@anasbarca426010 жыл бұрын
what is this ? explain please
@murf.b10 жыл бұрын
A Haxor is like a handsaw, its just a nickname.
@kilroywashere308610 жыл бұрын
***** It is a handsaw technically though its a hacksaw.
@GeekRedux10 жыл бұрын
Usually nicknames are used when the actually name is long or cumbersome. In this case, "haxor" is no more efficient than "hacksaw". Cool project, tough.
@chickfrog430710 жыл бұрын
Bist du deutsch ?
@daveyognaut728810 жыл бұрын
what if you just play a random song?
@karolisjuoz10 жыл бұрын
will any servo motor will work or the you need the big ones? please replay:)
@ChanneWahlgren10 жыл бұрын
Do you need the RadioShack® Digital Soldering Station? And if so, why? Trying to make this into a schoolproject but as u probably can understand I don't wanna spend over 160$ on this :p
@MAKE10 жыл бұрын
Any soldering iron will do!
@shnlj59108 жыл бұрын
+Channe Wahlgren Not at all.
@fasted84689 жыл бұрын
How do these complex projects not have someone (the video maker) simply buy these parts in bulk, put all of them into boxes and sell them on eBay or amazon with a link provided in the description? I and others would be glad to spend an extra ten or twenty dollars to know I had all the parts in hand delivered to my door rather than to stumble around a rad shack based on a still frame of a video. and the creator would make a fortune.
@0Bariq010 жыл бұрын
this is pretty dam cool
@perceptionbookings784910 жыл бұрын
This is brilliant!
@orkooki12310 жыл бұрын
That's awesome!
@maximilianopena10 жыл бұрын
So... I could get a laser cuttter with a few changes?
@kilroywashere308610 жыл бұрын
Yes a suppose you could thank you for bringing that up now I want to try it.
@DominoSixO10 жыл бұрын
Yes you can, just replace the pen with your laser but you will not cut but just burn the paper.
@maximilianopena10 жыл бұрын
Domino SixO I think that may depend on the laser but yeah, I thought about using it with harder materials tough.
@DominoSixO10 жыл бұрын
Maximiliano Pena You can use a powerful laser but control it with a regulator so you will be able to cut or just simple burn and have cool draws.
@86gtforme10 жыл бұрын
it would be very inaccurate look at how jumpy the lines are on the page
@ChanneWahlgren9 жыл бұрын
Hi, I've built the TRS drawbot for a school assignment and everythings seems to be working except the last and maybe most crucial part. Whenever I try to use the drawbot with any of the saved SVG-files I get an error message saying "Input string was not in a correct format". I have tried draw stuff through the stipplegen program aswell but get the same exact message. Please help, what to do?
@borinke598810 жыл бұрын
Great Proyect! I wanna built it :)
@IzludeTingel8 жыл бұрын
pocket plotter... BRILLIANT!!
@TomHowbridge10 жыл бұрын
Could this work with 9g micro servos if not what about metal micro servos ?
@animusfoxx69659 жыл бұрын
This is so cool
@DavidBucur10 жыл бұрын
What if the wires of the servos are brown, red and yellow?
@theshirehighlander72925 жыл бұрын
This is a mind bender.
@chandraveermathur6426 жыл бұрын
I'm making this as my final year project at college. I can't get the servos to turn beyond calibration. I'm using a lab bench power supply. Should I increase supply current or is there something else? @make:
@KartoFFelNO0ob10 жыл бұрын
on the website is a link to Enercell™ 6V/300mA AC Adapter but its not used ? but i can use it instead the battery pack? but the batterys are the counterweight will it still be functional without them?
@zlatkolesnik274310 жыл бұрын
The drawbot wave synthesizer gives me an error: Sequence contains no elements. Please help!
@chetanmali39699 жыл бұрын
How can we change the drawing pattern ? Can we make our own audio file ?
@helmut666kohl8 жыл бұрын
Did you ever try to replace the audio-cable with a speaker and a mic? :-D I wonder how the degradation would influence the plotted image…
@nishantlaxmikant58997 жыл бұрын
Do those servo motor rotation continues or it has a limit plz answer fast coz I got some like the ones which have a limit
@thatsmesothere10 жыл бұрын
hacksaw ends in a W
@TechBuild8 жыл бұрын
Can I please get a direct link to download the drawbot wave synthesizer?
@SylvaTheMoth10 жыл бұрын
... this+dubstep= crazy af drawings?
@user2C475 жыл бұрын
... this+dubstep= garbage drawings, the pen going off the paper, or most likely nothing at all.
@MrDaman956 жыл бұрын
You just earned a sub buddy
@timonharmel48667 жыл бұрын
Hi Do It work With a digitalservo, i have try IT but IT works the analog Servo With the gluemotor app but the digital Servo must be work because the rc Modell reciver send the self frequence and here work all servos... sorry for My Bad engilsh... can you help me
@longpham687110 жыл бұрын
can you tell me where to get the drawbot wave synthesizer?
@jsincoherency8 жыл бұрын
I'd be interested to see what effect the noise from (e.g.) MP3 compression has on the resultant image, and at various levels of aggressiveness.
@AiurIkiza8 жыл бұрын
+James Stanley It would also be interesting to set it up, plug a splitter into your jack port, plug in both your headphones and the machine, callibrate it, then produce music, see what it draws. Sell the drawing for 20000$ as modern art.
@filip.zivkovic2 жыл бұрын
Or put reverb on the signal
@justinp42359 жыл бұрын
Rather then images, would this same build work with me drawing PCBs board layouts? So that I can design pcbs and have this little thing draw them out
@kevinhirt10 жыл бұрын
I built one but i cant figure out how to download the WAVE synth software...
@Ndrewhenderson8 жыл бұрын
Hello, do we need to use 360 rotational servomotor or 180 degree rotational is enough ? Thankyou Make: Please Reply :)
@shnlj59108 жыл бұрын
+Andrew Henderson Those are standard servos, meaning not continuous rotation.
@Ndrewhenderson8 жыл бұрын
shn lj thankyou so much:D
@techgenius61128 жыл бұрын
Can we use any servo with a little differentiation??
@johnstarr200110 жыл бұрын
Nice job. You could use old printer to do yhe same
@DominoSixO10 жыл бұрын
Or just a printer :D
@johnstarr200110 жыл бұрын
Domino SixO True that! Lol Still would be fun to build. It's funny how history don't repeat but rhymes. How things can come back around. Suchlike older style bikes.
@balasaravanan21218 жыл бұрын
there is no instructions regarding how to bend the arm which holds the pen in your project site......................PLEASE HELP
@mustafasalah38769 жыл бұрын
hi i built, but did not know how to play it I have not worked for what followed all the steps, but I did not understand how to operate it the way
@setrak1210 жыл бұрын
If i try to put a 3d printing pen instead a regular will it work?
@rohithnechikkunnan83747 жыл бұрын
Does this thing draw anything and everything ?
@BeastOfTraal9 жыл бұрын
What if you attach the servos to the knobs of an Etch a Sketch. You would have to modify the software for making the wave files but it should work.
@sandrajaramillo38228 жыл бұрын
thaks for your knowledge
@NafisAhmad569 жыл бұрын
great idea... Wave file to draw. Nice idea...
@shankarneela8 жыл бұрын
How to download and setup the wave synthesizer software on pc, Please explain in detail
@toolkittt10 жыл бұрын
Can i use a micro servo for this ? Cause they're quit cheap...
@AntiGooseAction10 жыл бұрын
In the top right it occasionally says lake
@patrickmaren98259 жыл бұрын
what will happen if you use any regular audio file for the drawbot?
@venishpatidar399110 жыл бұрын
Can i use fatuba s3003 servo for drawbot project ? plz reply
@unknown24310 жыл бұрын
I wonder what the audio file generated would side like through speakers/headphones...
@l4d216010 жыл бұрын
hack-SAW damn it! hack-SAW! AH! *brain implodes*
@shukritobi9110 жыл бұрын
SO how can I convert this into a 3D printer? Perhaps adding a z-axis?
@BrianDillingham10 жыл бұрын
you watch a different video all together.
@alex4621510 жыл бұрын
make a sound file with three Ds, upload it to your sound player and you got it.
@DanIngaran10 жыл бұрын
AWESOME proj
@moonchildoforcamoon62728 жыл бұрын
Regular WAV song not set for a drawing, would this draw a sound wave?
@technocrat99847 жыл бұрын
how to centro the drawbot????from where we can have the app to centrol the bot for smart phone tell me the link....
@kenastrek315810 жыл бұрын
can it be done using normal electric motor ?
@VideoStefan1710 жыл бұрын
will Dubstep work ?! ;)
@quarknuggets520510 жыл бұрын
Which software should I use
@juliansanders129 жыл бұрын
Why does the instructions page no longer exist?
@qbitgaminglive8 жыл бұрын
sir plz say me how to download drawbot wave synthziser software??? plz reply me fast!!!
@oscarlesta17 жыл бұрын
excelente video
@nishantlaxmikant58997 жыл бұрын
which servos are those 360 degree ot 180 degree plz reply
@placebo_yue7 жыл бұрын
damn that's awesome
@PhilipBellos7 жыл бұрын
awesome!!
@arunavadas19 жыл бұрын
What is the minimum torque required for this project?
@stopstop33607 жыл бұрын
can i use small servo with your cod ????
@appusajeev9 жыл бұрын
Brilliant.
@nimishjoseph55719 жыл бұрын
Social Networking. ??
@appusajeev9 жыл бұрын
Who said youtube is social networking?
@cyraxabir39618 жыл бұрын
there is different types of servo motor, whats the meaning of ROB ?
@beenasanthu87579 жыл бұрын
where do we get the audio wave file
@user2C475 жыл бұрын
You have to use a .exe file to generate a .wav file.
@8osm3rka8 жыл бұрын
Can i translate your Weekend projects to russian with link to original video?
@GaneshHosur979 жыл бұрын
would it be very difficult to build a 3d printer on the grounds of this design and concept?
@roguepaul8 жыл бұрын
+Ganesh Hosur There is a very simple stereo lithography printer that has been built that uses an audio signal to control the laser. But it's prints are very crude.
@GaneshHosur978 жыл бұрын
oh!!!! Thanks for taking time to reply!!!
@sagar-cb6iu7 жыл бұрын
Sir i have downloaded svg files now how can i play them in mobile plz tell me i little confused plz reply me
@T1iCanon9 жыл бұрын
Could it be possible to control it just with arduino ? Because this project requires apple devices, I do have iPad2 but it doesnt work . it seems that it doesnt have enough power.
@dumle299 жыл бұрын
T1iCanon wat. This works with anything that can play a wav file, and output that over a normal 3.5mm headphone jack.
@T1iCanon9 жыл бұрын
dumle29 I tried, and several other tried it too. If you go to the project page there is a lot of people that are upset because it doesnt work on any device that can play waw file.
@shnlj59108 жыл бұрын
I made this and am trying to play it thru my laptop. It's not doing anything. Through troubleshooting I'm finding that my pc outputs an analog signal with realtek audio manager and I can't seem to change it. Any software recommendations?
@chandraveermathur6427 жыл бұрын
shn lj breadboard an amplifier circuit to put between the not and your pc
@DanielsGameVault9 жыл бұрын
Interesting, but unless you make it mill something (like a CNC), it's just the equivalent of a printer.
@henk61729 жыл бұрын
Thought the same, but it's fun to mke
@sWaRmBuStEr9 жыл бұрын
+Daniel's Game Vault Just play the song you love the most and see what happens :P
@botmonster22469 жыл бұрын
+Daniel's Game Vault It's just for fun
@Mateo-vl3zv8 жыл бұрын
im gonna make this
@techgenius61128 жыл бұрын
How to download drawbot wave synthesizer,i doenloaded but it is not opening in my laptop,pls tell me a solution
@dhruvaurala24677 жыл бұрын
can i use a bigger clipboard ??
@AnthonyMcAfee9 жыл бұрын
RIP. Radio shack :3
@hiwotyirgu80998 жыл бұрын
For once, can you make an awesome project with just a Raspberry Pi? Like turning it into a hackbox, or a python encryption or and decryption application? Or have a video with things you find around your house (yes, I mean all of the them...well, except the Raspberry Pi)? Like a robot made out of a shoebox, motor, wheel, and an RPi
@rebeccarosenzweig74439 жыл бұрын
Can I use it with regular music
@hioctane4612310 жыл бұрын
Please some one could send me the working programm or the audio file please, because i complete my project but software is not working and it gives me errors
@cameramandanno10 жыл бұрын
Sweet!!
@thomasjoseph80868 жыл бұрын
I didn't understand the connections of +and - from the battery to the servos plesse I want to make this project explain me
@jaseemtm94717 жыл бұрын
Alan Jose Thomas did you complete your project?
@glycheebeeps407810 жыл бұрын
What is the music? it's not credited anywhere
@jithinmj22557 жыл бұрын
can u provide me the whole components details so that i can bulit one
@bovazbabu922110 жыл бұрын
great thing
@darshilrathod69388 жыл бұрын
I am making a 45w led flash light with Xl6009 it is super bright and portable and can be used with rechargeable battery
@urie47698 жыл бұрын
How many lumens? I made one using a 100watt led, its a whopping 10,000 lumens!
@hengjimmysong349610 жыл бұрын
Anyway u could make a set for sale?
@MrHrithik710 жыл бұрын
can you give me the dimensions for the clip board ??
@KartoFFelNO0ob10 жыл бұрын
sequence contains no elements i am getting this wave synthesizer error can someone help me what can i do
@DILLY_DING9 жыл бұрын
what was the rpm of your motors
@CajunCoondicks10 жыл бұрын
how do i use the software ? there is no program file to open ???
@Michael-rt2tl10 жыл бұрын
Lol we don't have a Radio Shack in my city!
@SylvaTheMoth10 жыл бұрын
add a bluetooth audio reciever, and its wireless
@moover12310 жыл бұрын
use millimeter next time.
@86gtforme10 жыл бұрын
its an american show why would he use a measurement uncommon to him? google a length converter converter it will help. off the top of my head an inch is about 26 mm 4 would be 104mm your probably fine just rounding to 10cm
@moover12310 жыл бұрын
86gtforme That's easy. 1) Because America should adapt to international standards. 2) He would reach more people. And thank you for the tip, but I would never even bother to convert some old fashioned measurement like this.
@86gtforme10 жыл бұрын
ㅋㅋㅋㅋㅋ 1) if you look at the demographics of this show its mainly american that watch he is reaching a majority of his audience using imperial measurements. 2) america is adapting the metric system is used in schools and all Americans learn it at an early age the issue is that to change of of our machinery/industries have to make the change first. 3) the metric system is older than the imperial/us customary system. 4) as long as you plan on watching american programming i suggest you learn the conversions as we do instead of making people in the comments give them to you.
@lukes.572610 жыл бұрын
下次用中文。Next time use Chinese, more people speak it.
@moover12310 жыл бұрын
86gtforme 1) I just suggested, he WOULD reach more people. 2) well, that would be fine. I still doubt it. And you're wrong, it's a political issue. 3) You got me, no need to explain. 4) I comment as I want. Especially if I'm right.
@mrvncr8 жыл бұрын
is it possible to draw picture with dots not with continuous-line style ?
@chandraveermathur6427 жыл бұрын
M_ n no. not possible
@andremendes51168 жыл бұрын
Nice project, just inspire me to do something like that to me.... I will do that and share with you.... thank's to inspire me
@gof6669 жыл бұрын
HOw do you guys think: would it be hard to turn this into a 3D printer?
@kylehan59999 жыл бұрын
gof666 i think all you would need is another servo to control the height and you would need to control the speed of the nozzle i guess. Hey pretty interesting idea
@kylehan59999 жыл бұрын
gof666 but then you would probally need to plan another audio file for that extra servo and control the nozzle.
@brencabral38147 жыл бұрын
can i modify this to etch curcuit board?is it precise enough?