Welding and Wet Welding Gloves

It’s never fun when you have to weld with wet gloves the constant shocks that surprise you are every bit as exciting as a kick to the head. Everyone be blessed
www.schofieldwelding.com

[@baloneyjusticecheezedog]

Wow.. that looks like miserable work conditions... Ever think about dragging a few wood pallets to stand on next time the job sight gets flooded out like that? At least then you would not have to stand in water while work.

[@BeamerTheFox]

exactly, well put sir.

[@zackdion9008]

Hey I use those welding gloves too! Finally got some certs in school I got my 2g 3g and 4g on 3/8 place and my 2g on 1’ plate in stick🤘🏼🤙🏼 be blessed brotha!

[@joeblow7636]

Stop lying.they call you botch master the booger maker

[@mullervolker9814]

Why dont you use centimeters?

[@duanecreativemachine]

Your vids have been making me miss working in the field. This I don't miss.

[@joshm3899]

just remember that electricity wants to go back where it came from, either through you or around you. you need to be insulated from it.

[@BeamerTheFox]

standing on some pallets on that kinda floor or wet dirt helps to.

[@AlpineForge9600]

My challenge is really hot and humid environment , sweat pouring into my gloves so I wear heavy duty Nitrile gloves under my welding gloves, works really well for me

[@seancurrie4465]

Hey, don’t play music when the SA200’s running! She sounds great.

[@darmstrong9334]

Nope! I'm a puss now cause I got shocked real good onetime. I had no fealing in my pointer and middle finger on my left hand for like 3 years. Hats off to you guys for having balls!

[@JacobSchofield]

D Armstrong dang it I hope that don’t ever happen

[@stevewarner8880]

Hey Jacob How’s the old SA 200 running for you? I wish I could hear it working. Those old Continentals are sooo sweet when they jump off idle and go to work. I have a 1966 Redface I found in a farmer’s barn several years ago, got her all spiffed up. I don’t really need it but love to go out and run beads just for relaxation. I call it SA therapy. Have a wonderful day

[@JacobSchofield]

Steve Warner Hahahah that’s so true. The machine welds andruns awesome thank you for asking

[@ieaEH]

I love my 1970 RedFace

[@joeblow7636]

Are those bugel boys your wearing?

[@iTriedmyHardest]

Wearing some rubber gloves underneath my gloves always seemed to help keep me from gettin shocked. Cause gettin shocked while sitting on some pipe 20ft in the air ain’t fun

[@JacobSchofield]

Big Priv that’s a goodnidea

[@iTriedmyHardest]

Jacob Schofield oh yeah, give her a shot a see if it don’t help. I can say it definitely does with tig, proved that to my supervisor at the Kraft/Heinz plant were workin in yesterday haha

[@bigshortstack2929]

On top of that, get a couple of cans of Scotchguard and spray down the outside of the gloves, if they're cloth based. If they're leather, then get some saddle soap and rub a bunch of that on the outside. The Scotchguard and saddle soap are for waterproofing the outside of cloth furniture and the saddle soap is for......well, water proofing leather goods. That saddle soap is also great for your leather work boots.

[@joeblow7636]

I like how it makes my butthole feel

[@Mikey-ym6ok]

That’s good unless you’re doing it all day then nah

[@club-up]

Lol...welcome to the reality of a welder/fitter life. Good job guys. 👍

[@mattharper588]

Try running a air arc with wet gloves that really tickles

[@mikeundereood1071]

Mat I know you're pain💥💥💥💥💥

[@JLHcave]

This is why you have a helper he puts the rod in the stinger. Then he gets back in the truck. Oh and don't touch the pipe before the rod does.

[@mattgaming8717]

There jobs out where you hold bare handed a plate that gets water welded. And you hold it during the process.

[@JkCanvas]

Momma always said don't play with electricity and wet gloves. ;)

[@ChillyPking]

The best way when it is wet and not get shock. I keep a box of doctor glove in my truck and wear them underneath your leather glove you will never get shock. 😉

[@JacobSchofield]

Miguel Martinez oh man that’s a good idea too.

[@mikeundereood1071]

This is we're u find if there hole in your boat

[@tyellis7940]

I hate it when that happens. I’ve had the crap shocked out of me also.

[@JacobSchofield]

Ty Ellis it’s no fun

[@Villaeddie19]

What happens if your leads have cuts on them?

[@advancednutritioninc908]

I have a lot of respect for the welding that you do, and conditions that you all weld under!! I have welded quite a bit over the last 40 years ... but nothing I do has the difficulty factor that you all face every day!! Thanks for the Video!!

[@barrylandry4447]

Jacob. I know all about that also when I worked offshore in the gulf Mexico. Always worked on plus 10 bottom of the platform. And I used to stick holder with a rob crack UO the machine. And shock the ahit out of the fish. Anyway thought I'd share that. Yall stay blessed. Have a good one.

[@JacobSchofield]

Barry Landry Hahahahahah had some floating fish!!

[@brucemorris6319]

I used to work on a drilling rig . One of the mud pits needed some welding repair . A welder and his helper was in the pit working they were in ankle deep water the welder accidentally touched his helper on his face. Well after he got out of the hospital the doctor told him he has a burn track inside his body for head to toe.

[@JacobSchofield]

Bruce this blew my mind. I can’t believe that happened to that dude. That’s tough

[@JLHcave]

Also 4x4s and plywood.

[@shawnzemo8806]

I always keep a extra set of gloves just for that reason...use wet gloves for everything until you start welding...then switch out when your done...

[@shawnzemo8806]

If your jacket is wet and you need something to lean on you get screwed

[@JacobSchofield]

shawn zemo I went through three pairs yesterday lol stick them in the dash to dry between uses

[@shawnzemo8806]

I've seen guys use their exhaust to dry them out.....might have to try it out sometime lol

[@JustinRolfe]

How's the 200 running love your video's keep money Mondays it's so awesome how positive you are

[@trollmcclure1884]

Fkn music! Say something informative

[@wadewittman8510]

Mr Jacob, great video bud! I thank you for all your hard work in putting these videos out. I would like to know what brand of gloves you recommend, since this is a video about wet gloves. Thanks.

[@JacobSchofield]

Wade Wittman Yellowstone’s are the bomb!!!

[@wadewittman8510]

Jacob Schofield thank you! Have a great day buddy!

[@MrThenry1988]

One knee in the mud and wet gloves loading a rod will give you treat. I've had wet boots on the shop floor give me a jolt while loading a rod.

[@JacobSchofield]

it will let you know your alive lol

[@todddunaway2959]

Oregon welder here rubber gloves definitely work

[@wafflexcopter93]

Lil shock never hurt anybody lol. yeah sucks in the thaw season here in ND. puddles everywhere and stupid mud. rather it be 20 degrees than have everything wet

[@A_Man_In_His_Van]

So you guys weld in the rain but take snow days? That seems backwards. I would not want to weld wet. Unless I'm diving.

[@augie186]

Hey Jacob what type of grinder do you prefer to use?

[@JacobSchofield]

Agustin Lozano I like Dewald and makitas

[@nathanmartin1972]

I keep a box of the medical gloves in the truck, but if or when I accidentally ran out of them I have used a plastic water bottle.

[@fuentesartist6939]

No bitching just working the way it should be

[@willperry8644]

How many feet of stinger do u have and how many feet of ground do u have?

[@JacobSchofield]

will perry 100 feetbon both

[@willperry8644]

Is it worth buying all ultra flex or just put on a whip?

[@willperry8644]

What do u think of the lead quick connects and someday could u do a video on splicing lead?

[@melvinmariott8609]

Prep for the wet lol put on the rubbers and get it done iv been there lol.

[@alexmaurer9274]

I keep a pair of chemical gloves in the truck just for those days makes it nicer when rapping up muddy cables n gear

[@ajwilson313]

What kind of boots do you prefer Schofield?

[@3376mgjr]

No need to get shocked,Lenco makes a whip with a switch for about $70 bucks,I owned two of them when i ran to drilling rigs because any rig runner knows rain don’t stop that bit from turning to the right!!! Good investment for running a truck for companies that don’t see rain as a reason to stop working lol

[@williamgreene5488]

WERE RUBBER GLOVES ON THE INSIDE

[@CharliesMustangShop]

Who makes those knee pads!

[@taylorsteele3232]

crosscountry 300 vs pipepro 350? any opinions

[@jdjones5117]

You need some muck boots out there

[@JacobSchofield]

JD jones fought them today then got rained out what a pain

[@FasterThanJesus666]

good vid but get rid of the music

[@1greencuda]

rig mats , problem solved

[@CrossfitCarlos]

What kind of pipe jack stands do you guys use?

[@theRussianJiu]

Safety inspectors should shut you down.

[@JacobSchofield]

Hahaha you would think of but probably having an extra set of dry gloves is a lot better idea

[@keatonburdick1523]

Do you have a stick welder or a mig

[@A_Man_In_His_Van]

You serious? Buddy it's a stick. You can clearly see if you watch the actual video. Not trying to be a asshole, but come on. I know you can see the stinger, a mig has a trigger torch.

[@hitecharcwelding9193]

👍

[@gregorioramos4778]

DC shocks. I hate them

[@BeamerTheFox]

once, once i did this @1:28, never ever again will i touch a welder of any kind with damp gloves.... Welder up Grinder down bud.