How To DE-CASE a GoPro Hero 10 - GOPRO TEARDOWN

[@costofexpansebrain8025]

how would you go about mounting the go pro to a motorcycle helmet. But stretching out the components to create a low profile mount. E.g. having the battery pack at the back motherboard on the right and camera at the front.

[@juanmiguelkoury1743]

20:40 LOL! Great video thanks. Do you know how to remove the inner lens? With the 7-6-5s was really easy, with the 9-10 I haven’t been able to unscrew it.

[@gonzalomanriquez513]

Question, I bought a naked gopro 10 that came with the original Back screen to be able to make the conexion beteen the naked Gopro and my Cellphone, but not sure where to connect the back screen. please help.

[@estebanc-vistaprevia2941]

Where does the SD card go?? or how do you transfer footage to your computer??

[@rüzgarınadı]

is there any record time limitation or record stop problem? thanks

[@Chillkroetemix]

Can You do the settings via this 2 small buttons behind?

[@johnd9357]

The “little magnet thing” you pulled out is the speaker.

[@JosueDuronMusic]

Hi there, I decased my hero 10 but i think I broke the rear LCD Screen because now is just black, but the camera is working fine, recording, changing settings using the QR but the fron screen is not on, I turned it off just before decased and now I don't now how to turn it on again.... What can I do?, or this mean that I broke both screens?

[@cliptracer]

Hey, do you think It's possible to replace a camera sensor bus with a longer one? Thanks

[@WestPsyde]

Currently have buddies trying to get them produced i promise ill post here if they become available

[@cliptracer]

@@WestPsyde awesome, thanks!

[@cliptracer]

@@WestPsyde One more question: is that theoretically possible to have one camera sensor connected to 2 gopro boards at once?

[@cliptracer]

@@WestPsyde hey, any updates on the extended bus?

[@AliAbbasi-hs2vu]

how can i buy this fream and matherboard? can you help me?

[@jensendelap]

is the lens a threaded m-12 or is it one piece? thx boss

[@Funky.P0V]

I smacked my GoPro into a pipe on my drone no screens are cracked but it won’t turn on or off and the battery was almost stuck inside it. Do you think I could do this naked mod and it would possibly work again or should I just say f it

[@marcinogiego5005]

Hello, i have a problem. Not enough power - gopro 10 black :/

[@leo_dron]

i have these issue, not powering with lipo4s 1.5a it says it requires at least 2A to power in without a battery... have you found any solution?

[@marcinogiego5005]

@@leo_dron using an older software helped me

[@bboyriskio]

@@marcinogiego5005 wich one?

[@PierreFPVar]

@@leo_dron should use beta labs 1.20 or official 1.2 version. It works

[@justinwalker631]

not enough power error screen? hooked up to 6s battery leads. and checked with multimeter getting 1.3-1.4 amps.

[@WestPsyde]

Latest gopro labs?

[@bboyriskio]

Me too same error! Did you solved?

[@PierreFPVar]

@@bboyriskio should use beta labs 1.20 or official 1.2 version. It works

[@bboyriskio]

@@PierreFPVar yes i find solution, thank you

[@rubenvaneupen7327]

Do you know what the fan is that many people use?

[@VidarrKerr]

That thing you said you didn't know what it is, that is the speaker. Is it still waterproof? /s

[@thebestbanana-y-8227]

My naked GoPro 10 doesn’t record sound. Is it supposed to?

[@califpv]

do you just control the GP settings with the gopro app after this mod?

[@TheDroneNerd]

You don’t run a fan ?

[@gustavnordkildchristensen1684]

What about the issue of hero10 not wanting to turn on without a battery connected at first ? i got the iflight gopro-balance cable. but i have to install the battery and the cable before i turn it on, and then im able to remove the battery..

[@WestPsyde]

Latest gopro labs firmware fixes that

[@gustavnordkildchristensen1684]

@@WestPsyde and i guess that firmware also help on my regular gopro 10?

[@PierreFPVar]

Great tutorial! thanks!. QUESTION: are you still using it without FAN? any problem?

[@utube521]

Thanks for the video. Honestly, this is top. But is it possible to unscrew the lens itself, like if I would like to replace it with linear for better quality? I tried that with H9B but it looks like it is no longer removable by simply unscrewing it?

[@reedgeek]

I tried doing that with gopro 8, i found that the lens and the sensor is glued into a single piece. No way I can pry them open. Wasted good money on a good working gopro 8.

[@utube521]

@@reedgeek I think 9 and 10 are glued. But I thought you could unscrew lens in 8. Didn't know that. sorry.

[@utube521]

@@reedgeek but my GP 6 - works best. but there is a jittering when on bike. So best to do custom lens would be in gp 7. or you can record in GP10 5.3K and that in linear will give you almost true 4K

[@OverlandFamily]

This bec can work with 6s battery?

[@Funky.P0V]

Say I broke my back screen and the camera won’t turn on. Will it work if I tear it down or is it most likely broken

[@OnnieKoski]

I would like to know this too :)

[@7bo0ob]

@@OnnieKoski no need the back screen...what we need from.the camera...the internel board + front screen+ the lens

[@DronieBoy]

Do you sell the mount for this naked GoPro and the Iflight 85? Thanks

[@WestPsyde]

If I don't have one I can make one email me [e-mail]

[@GollesFpv]

my screen clearly gets power but everything is black and camera wont work.. any ideas ?

[@WestPsyde]

Check all cable connections reseat them if necessary

[@GollesFpv]

@@WestPsyde i got it to work! i wasn't my connections.. it seems like its a power problem, if i power it from the balance of my 4s with the iflight balance to usb c ( usb c cut off and soldered on instead) it wont turn on properly,but ive tested powering from the xt6o of the same battery and then it works? any tips ?

[@HindsightFPV]

Have you had any issues with this BEC? Mine worked all day yesterday and now it randomly wants to work.

[@digitalmunky]

Question... What are you doing with the lens/filter mounts after you've completed your tear down?

[@rush8821]

still dont get wheres the Sd Card in ?

[@WestPsyde]

Exactly where it did before card slot is attached to motherboard

[@califpv]

I got the nameless rc naked case for my hero 10... Where did you get the ribbons and Bec board that works with the hero 10? Thx man and happy new year!!

[@WestPsyde]

Hero 9 Nameless BEC comes with ribbon

[@cybyrd9615]

@@WestPsyde can you make a video talking about the usb c output resolution and the lag, I want make a dual gopro AR camera for VR headsets

[@cybyrd9615]

@@WestPsyde I ideally I would want 2.7k 120 fps, and very low lag, idk if this possible

[@sensemusicofficial]

cool .. whats the weight of this at the end ? .. and are you planning at all to provide such a thing from droneco ?:) .. like if someone buys a 10 with it for you to make naked?.. also does it work with the 9 too? respect..

[@WestPsyde]

Yessir! And I have decased gopro option available on the site

[@sensemusicofficial]

@@WestPsyde cool cool also can we power possibly from the balance lead? and what kind of effect will that have on flight time? on say a 6S droneco slammed squirt?

[@mygiguser]

@12:43 the speaker

[@7bo0ob]

I don't know what's the problem... the screen display starts ok...but the camera it doesn't start recording ... long and short press recording buttons ... it doesn't recording

[@WestPsyde]

Check all connections

[@epicjfpv]

.5 hex driver for the lense

[@bradfpv67]

thanks for your explaination. I have a question. I follow the way you tear down gopro10, and I finally made it. but my naked gopro says power is low. do you know why my gopro shows that sign?

[@WestPsyde]

Load latest labs firmware

[@bradfpv67]

@@WestPsyde Oh! I didn`t updated firmware. I made it! thanks to you!!

[@davidgeib1027]

Hey, I have the same problem. Where can I download it?

[@7bo0ob]

@@WestPsyde I did load last update still I got this massage.....I press the Rec button the massage disappear ..I press the record button again no effect it doesn't start record

[@SR13_fpv]

Great video! Very helpful! Thank you!

[@tiagoborgesburiti129]

Very helpful, thank you!

[@dailofpv]

I needed this! Thanks for putting this together! Have you had any issues with the 10 overheating?

[@WestPsyde]

I haven't ran it much yet just been building them, but this one is for me so I'll report back but I only need a few minutes at a time so who knows

[@TeamSeijaku]

Any issues by now ?

[@jeramboo8511]

20:37

[@AmpleLight]

lmao do they seriously cut gopros apart at the factory during a repair? There has to be a way to open it without cutting its dingdongs off....

[@WestPsyde]

Nope but it's how I and many others do it.

[@clll7]

The easiest answer is that they don't bother repairing it to begin with. Asked about a hardware issue with the USB-C port and they just said to buy a new one.

[@JherzsTV]

ngano imo na gihiwa doi oi sakit kaau sa mata

[@cutedogsandgames]

You couldve just bought the hero 10 black bones..... for way cheaper.........

[@WestPsyde]

Weight matters when you are flying music festivals over people. Bones is too heavy for that. And I'm runnin naked hero 12 now need that 10 bit. No bones 12 sorry

[@cutedogsandgames]

@@WestPsyde Yeah no i just said that bc my friend who flies FPV bought it and said its perfect for FPV so yh I guess thats for him and everyone has their preferences

[@sensesfpv]

That’s what she said 😂

[@angiehidalgo2078]

😅dumb ass😅

[@fennbotfpv6968]

I stripped the screws on my lady flaps 🤖

[@sandersassen]

GoPro lady flaps ... bwahahaha

[@federicosuansing7148]

you are siraniko