What 6 Different Instrument Cluster Layouts Does BMW's M340i Have? Bimmercode Tutorial Reveals All!

[@JonR35]

M gauges doesn't show 3.0 csl anymore. It t doesn't tell you what mode you are in which is annoying. If it showed the mode plus redline it would be perfect. It's also trailing grey unfortunately.

[@Eluusiive]

My logo is gone even after switching back to the default dash and coding the regular logo back. Did you have the same problem?

[@ahmetfatihdogru1568]

​@@EluusiiveMy m340i text is also lost, how can I get it back, and when I turn it to m screen, there is a space in the middle

[@kylecarneiro4688]

@@ahmetfatihdogru1568hey did you ever figure this out? please i bought the car and its like that

[@ahmetfatihdogru1568]

@ o found if you have bimmercode you can change it in the expertt mode

[@bobcrraig]

how do you get it to say m340i while with the 200 mph?

[@legacydriven]

Not sure if you can… I think the 200mph setting is typically reserved for M cars. It may be possible within the advanced settings but I personally haven’t attempted they fix

[@BN-jk6of]

Great video, does this change UI elements on the HUD as well?

[@legacydriven]

Thank you! 🙏 and I believe the HUD interface is customizable but only in expert mode while coding using Bimmercode. I may be wrong, but I believe this is the case. Also, I don’t think the M layout via HUD is available for all models. So it definitely depends on what model you have. Hope this helps 👍🏼

[@justa4s_]

For the M you can change the 3.0 CSL to anthing you want (as long as its a real M car) and if you go into DZM_variante and set it to S63 it shows an RPM The M Sport also shows the M stripes next to the speed limit info

[@legacydriven]

Thanks for the insight! Unfortunately, my m340i wasn’t a full M car so I couldn’t take advantage of changing the icon but this is good to know!

[@justa4s_]

@@legacydriven Miscommunication sorry about that. What I mean by as long as it’s a real M car is like M2, 3, 4, 5, 8, X3 M, X4 M, X5 M, and X6 M. Don’t think you can code M340i with the M layout. You could try tho!

[@legacydriven]

@@justa4s_ definitely, I gotcha! 👊🏼

[@samuelfreericks168]

@@legacydrivenare you able to have it keep the m340i at the top but also have the 200mph on the dash and the map still in the screen?

[@legacydriven]

@@samuelfreericks168 So the map is a separate variant of the cluster as it can be adjusted via Idrive. The M340i and 200mph are also separate from each other I believe, but, as mentioned previously I do think this can altered within expert mode (customized) but just be cautious as expert mode allows for a slew of customizations that can quickly become an issue if you’re not experienced 👍🏼

[@palkiraly7545]

Hey! Can you make a same video about the new m340i?

[@legacydriven]

Hey, I actually have this video layout scheduled for my G80. It has the new I Drive 8 (same as M340) but some of thr features will just be different and I’ll go over that 👍🏼

[@Power-Down]

does anyhting change when u press sport / eco buttons?

[@legacydriven]

For sure, those modes will still alternate to their different layouts when pressed 👍🏼👍🏼

[@Power-Down]

@@legacydriven ok cool thx

[@legacydriven]

@@Power-Down Absolutely 👍🏼

[@vada.6024]

Is the check engine light caused by Bimmercode?

[@legacydriven]

Hey, yeah so if you’re referring to the CEL light you see in this video? If so, yes, it comes on when the car is in diagnostic mode. Once you’ve completed your coding, and you back out of diagnostic mode (shut the car off), the CEL when turn off and clear itself 👍🏼

[@_unknown___srt]

So I have an m340 as well 2022 mine just says m how’d you get the 3.0 cs

[@legacydriven]

Hmm. 2022 is still ID 7, correct? Or is yours ID8? Also, the 3.0 showed up on mine simply because it wasn’t a full M car so it displayed as standard. It should show under one of the M displays…. Unless an update has changed this since the time of filming this video. That may be the case!

[@suzycue9278]

How do you turn off the trip calculator display on M340i? I accidentally hit it and all I can do is get it to toggle through the diff calculations, but I don’t know how to turn off the trip calculator and make it go away so that it goes back to the standard instrument cluster display.

[@legacydriven]

Have you tried toggling using the BC button on the high beam indicator (left side of steering wheel)?

[@peterpetru1032]

Could you tell me how to code virtual driver view

[@legacydriven]

Virtual driver view?

[@peterpetru1032]

@@legacydriven yes it shows you live traffic around you when you have driver assistance on it's in there on newer models after 2019

[@legacydriven]

@@peterpetru1032 understood. So that is based on driver assistance package. If you have that, and the accompanying sensors you should be good. Otherwise, I don’t believe you can code this in with Bimmercode. Hope this helps!

[@Shortyzworldtv]

What year is ur car. Also can I do this for a 2022 m240i g42?

[@legacydriven]

This is a 2020 G20 M340i, and yes! The foundation of functionality is the same for the G42 👍🏼

[@JohnUSA7]

Is there anyway to add (customize) the tires PSI info on the right side of this dash on my 2023 BMW M340i sedan? My 2022 MB AMG GLE 53 does have this option and I like it a lot, as my BMW does not have any spare tire and this PSI info will be very helpful.

[@legacydriven]

Hi, I believe the M340 should offer pressure monitoring within the Idrive 8. Does yours not show? I know only M cars offer tire temps, but pressure should be standard within the instrument cluster.

[@n0t_fast]

Will you loss warranty for this trick?

[@legacydriven]

Not that I’m aware of, no. This is not interfering with any diagnostic or engine coding and does not change how the car performs. It’s simply a visual alternative that you’re unlocking within the controller that was not provided by BMW from the factory for your specific car BUT is BMW compatible given it’s their layout.

[@SleeperG30]

Does it work for a 22 G07?

[@legacydriven]

Yes absolutely. I believe the ‘22 G07 still has iDrive 7 so it should be very similar. In the basic mode you obviously won’t get an M340i screen (or similar) but you can access the standard M sport visuals etc 👍🏼

[@AaronDuncan]

I can't get my display back to the original display with the M340i logo. Standard just displays the "M".

[@ahmetfatihdogru1568]

I have same problem

[@naheem7010]

Did you ever find a fix for this?

[@ahmetfatihdogru1568]

@@naheem7010 yes I set the old dial from the bimmercode backups section and it came back, and it can also be solved with expert mode.

[@AaronDuncan]

@@naheem7010yes had to use protool

[@naheem7010]

@@ahmetfatihdogru1568thanks. I’ll give that a try 👍🏽

[@logical8470]

does the ECU need to be unlocked to do this?

[@legacydriven]

No it does not 👍🏼

[@logical8470]

@@legacydriven ty 👍❤️

[@legacydriven]

@@logical8470 you’re welcome 👊🏼

[@farestadfi6210]

Thanks for the tip man. Just a quick question, at the end of the video when u said have the car running u mean by having the engine running and everything on just being on park. At that time am I still able/is it necessary to press the start/stop button 3 times for diagnostic mode?

[@legacydriven]

Good question. So to clarify on that point! I was referencing having the battery at a sufficient charge prior to starting your coding session. If you know your battery is in good shape (newer and/or charged fully) or it’s been on a trickle charger, then you have no concern as the coding software these days are way faster than it used to be. IF your car has been sitting for a while, or, weak battery then I was saying you may want to drive the car for a while to place a charge on the battery. Diagnostic mode should be entered when engine is off, in park, and battery at a sufficient charged state. 👍🏼

[@Whoareyoucalling]

M layout on my 2022 430i Xdrive Just has M at the top, no M4, or 4.0 CSL.

[@legacydriven]

Do you have idrive8?

[@Whoareyoucalling]

@@legacydrivenI drive 7. To change the name now you have to go under expert mode and you can select any modern BMW name.

[@legacydriven]

@@Whoareyoucalling ok that’s what I thought! Thanks for sharing on here 👊🏼

[@TTK14U]

does this make your car really go to 200 mph?

[@legacydriven]

No, certainly not. Just gives you that sport dash used by the M models

[@Erickguitar16]

I am wondering. I would just want the layout to change to M sport mode gauge only when in Sport mode. Like when you put it in sport plus the screen is totally different on a M car.

[@legacydriven]

Well the screen will change to a visually different layout in each mode, depending on what you select, the same as OEM. The difference is that this allows you to access an array of different options not provided in the OE screen, but available for your model (or other models)

[@deepanpatel90]

Great video. Question, after coding in the different instrument clusters do you think the fuel gauge is correct? I have a 21’ 330i and I coded in the M performance 160 cluster and I’m not sure if my fuel gauge is accurate anymore. I noticed the needle dropped a bit from the position it was in before the coding. Also the digital range number dropped as well. In my case it went from 311 miles to 260 after coding.

[@Reallydiorrr]

So it’s not only for Ms ? I have a 330i would it work for mine ? I have a 2020

[@ringringskier]

Once you coded your 330i into M Performance package the system expects you to drive like crazy, hence it shows the shorter range... ;-)

[@legacydriven]

Thank you 🙏 and interesting observation. I never noticed a difference with my fuel gauge, however, I do know that the visual graphics are different from layout to layout so it may just appear lower but in reality the fuel level never changed. If that makes sense?

[@legacydriven]

@@Reallydiorrrabsolutely it would work for your 300i. I also had a 330 previously and this worked perfectly 👍🏼

[@legacydriven]

@@ringringskier😂

[@DDD-wz1gy]

Is there any way to have the Alpina display without the Alpina logo and instead an M340i logo, M logo, or no logo at all

[@legacydriven]

Not that I’m aware of. Possibly in expert mode, but I did not explore that option

[@Dimdontdoit]

Can you still get tuned with one of these

[@legacydriven]

Certainly! This is only aesthetic 👍🏼 and won’t change performance characteristics

[@jd7197]

Can you use the Kies adapter to code an M340i...to turn off the Auto Start feature when coming to a complete stop in the Eco mode?

[@legacydriven]

Hi, so the M340i has the auto start/stop button in the center control panel which is the easiest way to turn off that feature. Alternatively any of the sport modes automatically deactivate auto start/stop as well. Regarding eco pro mode. I’m not sure that is possible via coding. It may have to be done through expert mode inside of Bimmercode. However, anyone using eco mode most likely wants to utilize auto/start stop.

[@adithyashari]

Do any of them have a startup animation when you open the door like on the G80/G82?

[@kevensantos7656]

Yes, you can code the ‘ Bmw M ‘ animation at startup / power off

[@legacydriven]

Correct 👆🏼

[@Top_g80comp]

Background music too loud

[@legacydriven]

I appreciate the feedback 👍🏼