What Clear Coat Should I Use To Paint My Car With? - High Solids Or Medium Solids?

[@diyautoschool]

It's a good clear -- It's a BAD CLEAR -- What clear is it.. To see CLEARLY it's all in what you think it is! Thanks for watching and HAPPY NEW YEAR!

[@carsrcool7149]

May God Jesus Christ who always existed bless you in the work you do every day...happy new year...Jay....i can get you out of both death AND taxes. ! : ) only possible through the love and TRUST in our saviour God Jesus Christ...the Son of God Our Lady.. have a happy day. : )

[@kulan9379]

Happy new year Pete and Minnie 😁

[@privateprivate1865]

Lolol

[@kedsherman4457]

Is Dupont clear good

[@markevans4547]

either you put the color on wrong or you put the clear on wrong on both.

[@PhillipHall01]

Good video Pete. I have found to use a good coat of clear base on the area that is to be blended will do the trick. Phillip Hall

[@matthewellison9702]

Have you ever tried SPI Universal clear, it’s a high solid clear that a lot of people seems to like a lot

[@here_to_watch2115]

I'm spraying their epoxy and regular 2k next week. Was going to use their base and universal clear. I've seen a lot of positive feed back on spi products.

[@mitchellferre1652]

I have heard good things about spi clear but didn't try it because it's polyurethane. I will stay with acrylic urethane. Far less toxic. The hardener in any clear is nasty stuff. Isocyanites.

[@bobbyelliott1911]

Roberlo products are economical and user friendly I have used it often and I recommend any of their products

[@mitchellferre1652]

@bobbyelliott1911 I wouldn't say Roberlo products are Economical but I don't expect top notch results or durability from cheap stuff. I will pay it forward just like the rest of my equipment. No HF guns or Speedkote clear for me.

[@dannygilbert9477]

And Thanks for keeping the video clean

[@mschneider7832]

Just found your channel about a week ago. I am enthralled with what you share. My projects have paralleled most of what I have seen here. You have reinforced some of my technique and made me smart and upgraded my skill-set. Thank You For Being HERE !! Best Regards, Marc

[@D.W.e.s.t.]

Thank you Pete never heard clears explained this way. You da man!

[@lawncuttingplusdelta]

Pete CLEARLY , you are solid ! …. Thanks for showing us how it’s done ✅… best for New year , to you and Minnie ❤…. I was going to say don’t work too hard , but that’s not in your d n a

[@WesternReloader]

Your friend Pete just keeps going and going 🎉

[@Fireman9ify]

Happy new year, Minnie and Pete, hope 2023 is a great year

[@BartBencosme]

Have you used finish 1 FC740 and whats your opinion

[@jogalong]

Thank you, I'm learning a ton from your videos!

[@n1chr0me6]

Happy New Year, my friend Pete and Minnie! Wishing you a peaceful and successful year.

[@petar443]

A tip i heard years ago in Pete's video. - If you get to this situation where you need to color sand your fresh new paintjob and accidentally burn through the clearcoat while sanding , you CANNOT come back with just a paint and blend it and then clear coat again. What you need to do is to wait 2 weeks for the clear to heal, then come back featheredge where the burn through is and use little epoxy primer before blending the paint. Then you can clearcoat. Otherwise the reducer in the paint will react with the edge of the clearcoat where the burn spot is.Happy new year.

[@shawnarnold5079]

That is true. But that’s why us automotive painters make good money because there’s ways to make that not happen

[@HPAcustomriflesandcerakote]

​@Shawn Arnold exactly, i never burn through my clear. If doing repair work now days I am all about express clear too

[@ronniepate4315]

Thanks Pete for all the knowledge you have freely given to your followers . I'm wishing you and Minnie a Happy New Year !

[@sstocker31]

Can't get enough of your vids and your knowledge Pete, I love your content..... wishing you both the best in 2023!

[@boostismagic]

Happy New Year, my Friend! Good health to you and Minnie

[@rudimurga7034]

Happy new year 🎉 ✨️ Pete and Minnie thanks for the route 66 sign looks nice in my garage wishing you guys all the best 👍 👌 God bless both of you 🙏

[@bryanmm9382]

My friend pete, have you tried to apply reducer around the blend area right after you finish the last blend coat? It works for me and it doesnt lose that much of gloss at all.

[@HPAcustomriflesandcerakote]

I like Roberlo Clear. The 150 HS, the Dicrom, my favorite is Roberlo 510 Kronox, it is really outstanding stuff if you want a good, easy to spray top shelf High Solids Clear coat. A lot of other professionals like the 610 Kronox which is really outstanding too. Another thing Roberlo makes that is great is their Multyfiller Highbuild Surfacer/Sealer and is priced fair.

[@terrydolbow4299]

Thanks for the info on this subject! Have a Happy New year to you and your family.

[@sphdg]

Thank you my friend pete! Did you use a wet bed or base coat blender before base

[@deankay4434]

Pete, Thanks very much for the review on the Roberlo Clear coat. They sell on eBay and I bought MS clear w/ standard hardener. I also bought their high build primer with standard temp range. But I want to try their orange tape. I have not used any of this product as if I am unsure, on a pickup I could use it between the bed & cab (White top) and in the bed area and pass judgment on it. They list 4 locations (2 in PA, New York and maybe Jersey). Only one store must sell online, but the cans are liters and tape comes in plastic sleeves. Each can was beat to hell, one was leaking, white foam peanuts for packing but they broke open the sleeve of tape and shoved it into the boxes to fill. At this time, I was more concerned with back surgery / procedure number 6, followed be procedure #7 and this type requires software adjustments. Unfortunately, 6 months of weekly trying, engineer adjustments, they did number three. So time passed with my 6'3" lumber burning and mean time I was pissed. They changed my communications with them to list me as a happy ASE Master Tech and eBay couldn't do anything! Buyer beware, but I am living in pain, takes forever to save money for slightly cheaper product and got screwed, and all they said was;"Looks fine to them, enjoy". You get what you pay for in product and customer service, but my 13 year old grand daughter knows better to pack things as they did! Look carefully as their disclaimer say "Cans may have some dents in then" yet arrived in a clean smooth box. Thanks for the review and in a few hours, happy 2023!

[@PhillipHall01]

Dean I have used Matrix MS-78 medium solids and liked it.. . I just got a shipment of Urekem high solids, will try it soon. Phillip Hall

[@deankay4434]

@@PhillipHall01 I cant find anyone in Omaha that sells Matrix. Ryan Evans on "Counts Kustoms" tv show uses Matrix (A Sherwin Williams) company. He is great! I had a bad experience with Roberlo on an eBay purchase. Dented, leaking and sleeve of tape busted open and deformed encrusted with white packing peanuts. I was sad! Have a good 2023! As today is 1/1/2023. DK

[@PhillipHall01]

@@deankay4434 Dean I won’t recommend the Urekem until I use it, but it came highly recommended to me by SorayWayCustoms. The service was great. Got my supply order very fast. Came from Southern Mississippi from a company called The Coating Store, Packed professionally. No dents, packed tight and protected. So far so good! We will see how the products preform. I ordered a good bit of stuff. Base, clear, reducer, hardener, high build primer, epoxy primer, clear base etc. Phillip Hall

[@deankay4434]

@@PhillipHall01 Thanks for you objective input as all is welcome. UreChem products are a favorite of "PHARRAWAY" who is doing custom, restorations and some collision. He uses their DTM Epoxy to cover bare metal, 10% urethane reducer to use as a sealer, but he is hooked on Grant-7 clear coat. Kirker Enduro Prime DTM in black is very hard to get. An employee of Eastwood who quit and moved out of California swears the Eastwood is selling Epoxy as relabeled Kirker. Black has been the largest seller and the TDS sheets look identical. Kirker is moving into a new facility and promises to make Black available after the first of the year. It is clear that today, moving is expensive from building materials, labor, land and permits so selling Grey alone does not cut it without having a long term contract as collateral at the bank! Yes they carrier HOK, 3M and other products as the main competitor is "Autobody Tool Mart". It will be interesting at best. Plus, almost all epoxies have a DTM component in them. Even PPG Vibrance VP2050 is a hybrid of epoxy resins, DTM and a high build. It pours like pudding. It sells for $450 Qt then pick a catalyst of correct temperature. This is forcing many DIYers to scramble. You can't get Matrix or ShopLine unless your PPG dealer is a platinum level. Behind the counter, PPG has close to 7 lines of named product so it makes this confusing. I think this is why many are driven to "SPI" for many of high quality base products with a limited line of colors. But they carry a great clear like "Universal", MS and Euro HS. It is getting strange out here! DK, Omaha.

[@PhillipHall01]

@@deankay4434 Thanks Dean, Matrix has a good high build DTM it’s MP 200 and last I bought was around 150ish per gallon. I’m sure that’s probably changed since the last election. Good stuff and heavy in the can …

[@jeremyking5684]

Just painted my 86 silverado using matrix ag 40 clear ,and it's buffing like a rock! Not to happy with it, I used nason 475-00 to paint my dad's 55 belair and my sons truck and I love it,buffs great, I wish now I had used it on my truck but I wanted to try something different! Might end up reclearing my truck, speedokote has good clears I used it on my dump truck.

[@mitchellferre1652]

I have used nason 498-00 clear good stuff.

[@nahtannoJv8]

I am wondering what my friend Pete is using instead of the Matrix MS-52. ??

[@markfuchs9385]

Happy New Year Mini and Pete and thank you for all the great video's.

[@joaquinperez959]

HAPPY NEW YEAR TO YOU AND YOURS PETER STAY WELL NOW AND ALWAYS YOUR BIGGEST FAN!!!😀😃😄😁

[@randy1ization]

have you used URECHEM clearcoat and was it good?

[@privateprivate1865]

Ive never met a lefty like pete.

[@BearBudgetgarage]

My friend Pete....do you ever lay down a wetbed of color blender/clear base/ to apply the base over on a repair panel? To try to avoid dry spray?

[@rmckayne]

Roberlo is from Spain. They have good products, their filler is good, but here in America they change the hardener, for some reasons, and doesn’t behave as original.

[@PerformanceRacingGroupGarage]

Have you used their body filler, I’m trying to figure out what is the best body filler to use on my C10 project. I’m taking it down to metal and replacing some panels.

[@mikerobi6100]

awesome content always great stuff you tell us too

[@larrypugh9336]

I only use Urekem Glamour HS for the past 4 or 5 years use to use PPG

[@warrenlewis3977]

Why did you stop using the PPG...price?

[@larrypugh9336]

@@warrenlewis3977 the way I price a paint job is labor plus materials So it doesn't make me any difference in what I make the Urekem is half the price and looks just as good but I give people the choice what paint I use because in the end it doesn't change what I make just what the total is

[@larrypugh9336]

@@warrenlewis3977 I'm retiring this year I've got my house and shop sold I'm tired of working 7 days a week I'm gonna Finnish up a few rides I promised to paint and I'm out but I will be building a new shop where I'm moving to just in case I want to do one every now and then 😂

[@warrenlewis3977]

@@larrypugh9336 good for you Larry 💪👍. Where are you located?

[@larrypugh9336]

@@warrenlewis3977 Fla /Ala line

[@TheDynotuner]

Have you used Tamco or Tammy's new company Orion product's? BEST sanding & HQ product that's not over the top priced I've ever found. It reminds me of the old school HOC before they were bought out & went way south

[@SDuser-en9pb]

HOK UC21 os a great clear, it flows out nicely, has an open window, and excellent gloss, very user friendly, it lays down perfect, I really like it and it is one of my go to clears

[@poorboys3755]

You should make a review of the ROBERLO MULTIFILLER EXPRESS its a primer filler that i like,maybe you should try it and give us your opinion and experience ,they sale a lot in the south texas and i think is good stuff,thank you for all pete

[@steveschweitzer5765]

Absolute garbage! That crap cost me a total strip and repaint when it failed

[@robertscott3399]

I use u-pol universal clear 20 system but I repaint guitars they have difrent ones tmcos glamer clear is supposed to be good to

[@ganeshnarayan5505]

Great video Pete thank you for your knowledge.

[@kimberlywilliams9757]

Happy New Year to you and Minnie! 🎉🎆🎇

[@trentdawg2832]

30/40 yrs ago that 500/560 sec was my dream car, still is if it was well looked after over the years and id gladly trade my modern cls550 for the right specimen…..they remind me of the coke dealer benz on old miami vice episodes….40+ year later and they still are just as beautiful as before!!!!

[@lccdan1]

D.Y.I. AUTO SCHOOL Thanks for another great video. What is the deal with blending clearcoat? I hear people say they do it all the time. I have always been told to never blend clear.

[@warrenhls3083301]

Did you warm it up in hot water before you sprayed it? Did you add any reducer or acetone?

[@mitchellferre1652]

Would a wet bed of clear base to start with on blend areas prevent those dry spots Pete ?

[@Cobra427Veight]

Hi , can you tell me if a clearcoat is only mixed with a reducer , why is it listed as a 2k , I thought 2k would need a hardener . Cheers

[@rogerkisling8869]

Happy new years beeich..good video

[@SaraWillow]

Happy New year my friend Pete! 🥳🥂🍾🎇

[@gordiefrench5342]

I would like to wish you and Minnie happy new year Pete I love your videos You teach us dumbass paint lovers so much Thank you so much

[@algirdaslt]

Use binder or in usa caled base clear

[@markd4838]

Happy New Year Pete and Mini

[@cowlhoods]

Did you notice a difference in humidity affecting painting in Utah than in texas?

[@michaelbristol6467]

Happy New Year My Friend Pete. 😉✌

[@MemphisTigersOnRivals]

I didn't like Roberlo when I tried it. I like using HB Body Clear.

[@dannygilbert9477]

Pete could you use a DA or does it have to be done by hand

[@sethgerber2132]

It's been about 3-4 years since I saw you first use this clear, do you know how it's holding up on the beetle. Just curious, I'm looking for a more affordable clear. Thank you pete

[@justinwerfel6396]

It’s junk

[@rogerstephens8980]

I use matrix 42 2 to 1 high solid not 52 never had rough bend can buff next day get life time warranty. Used ppg had other of problems darkens your blend. You can't tell how good you're clear is until 8 to 10 years old .

[@jbcarrico7877]

Does Matrix last 10 years, didn't SW buy them out

[@danielwatson8164]

I used to use it where did you get it?

[@jetbtkng]

problem here pete u cant get this clear anymore, i looked it up, cant find it

[@kenmastersmaster]

So finish 1 isn't a good clear because it need to mix it 4 to 1? What if you just put an extra coat would that be the same result as a high solid clear?

[@markevans4547]

don't ask him he doesn't know

[@markevans4547]

... but yes , you are correct

[@The88katana600]

Happy new yr Pete and Mini

[@newriver8940]

I never liked a blending clear that makes a wet bed to blend with before the base coat because it is a lacquer based product and will be the weak link on the final finish. True you can get by with a blend I just try to use a slower reducer in the base,it makes a better job but takes a little longer.

[@kenmastersmaster]

Thought it's urethane based

[@bathtubrenew]

Brother, you need to work on your base blending technique. No reason to have halo’s around your base blend edge. Slower reducer will help, also hard tack between base coats, especially your blend edge. Not everyone can be god at everything, blending is one of the hardest things to get good at, seen tons of your videos, super talented body man. Love all your videos.

[@troyadams1076]

Dam good video teaching us people

[@bensonporter1384]

I rather ms clearcoat over hs clearcoat because hs clearcoat is too thick and makes alot off orange peel if it wasn't sprayed correctly!

[@chrisfinley7032]

Can I come learn I don’t mind getting cussed out in the process 😂

[@jamesofallthings3684]

Roberlo is decent, but finish one is the best bang for your buck by far.

[@lodollar23]

I can't hardly find roberlo clear. Did they go out of business? Or sell to another name

[@injesusnameamen119]

Thanks

[@ryannichols8315]

It's all in how you use it. I have no doubt this guy knows a lot about painting. But it's impossible for a person to know everything, because of the amount of products and how much they can differ. Because you can use a high solid clear in a blend situation. You just need to reduce it enough. Then spray a blender or reducer over you blend panal to melt that clear in. It's what they call burn it. And that's another helpful method. Using a heat gun. But that is for pros, and something you should watch being done before you try it. Then, it may say wait 3 days. But if you're having trouble buffing and sanding. Maybe you should try and sand it after 24 hours. Could make it a lot easier.

[@davejohnson4472]

Dam peter miss watching you everyday..

[@Val-mm5gd]

Extra slow reducer for base coat

[@gladememmott3001]

Ueah thats like $250 for the same kit nowadays minus the reducer😢😢😢😢😢😢😢😢

[@gregff9330]

Hi there, You should try SPI,s Universal clear coat. I hear it is high solids, sand easily, and has infinite sanding window...Southern Polyurethane- Great folks!!

[@markmikheyev6730]

Try out the Omni mc270 production clear lays down really flat, easiest clear probably to polish and it’s pretty inexpensive. We use it at the dealership I paint at

[@thomasseliger2982]

Aren't HS clears a little more tricky to spray also? Don't want to lay flat as a MS clear?

[@bosshawg7427]

Yes they are. More orange peel unless you really tune the gun. I prefer a good quality medium solids and just apply extra coats. High solids are for shops that want to save time by only spraying two coats eve though medium solids have been working for decades. Go figure....

[@Freds_Trucks]

@@bosshawg7427which MS clears do you recommend?

[@robertthrem3382]

Put a light on your gun and watch the finish as you apply it

[@markevans4547]

a light isn't going to help this guy.

[@hobbyautobodyfun9315]

😎👍

[@bosshawg7427]

Medium solids sprays better in general. Just find a high quality MS and don't get caught up trying to work with HS

[@trentdawg2832]

It doesnt matter what i drive, your services and fees should be the same and consistent with everyone regardless of their living situations, what kinda shit is that?? I sure hope you dont do business with that man and only send refferals to him of your worst customers only, and even that may be doing too much……great video by the way, but i wouldnt expect it any other way coming from you sir!!!

[@cumulusvapes7]

Oh man i cant believe he didnt even do a live for New Years! Man he must hate his fans! Everyone else did :(

[@TraitorVek]

In other Words... Get it Right

[@TraitorVek]

Happy New Year !!!! #Everyone

[@robertthrem3382]

Lol😂

[@cesarconh895]

These base coat clear coat paint jobs are not ment to be buffed. This paint and clear are still drying a week after they have been sprayed.

[@gm-lb9oe]

Hi. Sorry to disappoint, but the clear does need to be scratched down up to 3000, then buff with compound. Thats how you get a glass smooth finish. Just look at all the show cars. They aren't just based/ and then cleared and out the door.

[@warrenlewis3977]

@@gm-lb9oe good point GM...why do people think you don't have to wet sand and buff?! I spray 4-5 coats knowing that I'm going to rub on it. 800-3000. Absolutely beautiful and glassy. I paint boats for a living.

[@v1-vr-rotatev2-vy_vx31]

Too many junk clears on the market off brand names,,, use BASF best clears and Sikkens best clears,,, the new PPG no orange peel clear will be one of the most expensive

[@1manshtshowandautobodystuf891]

Ole

[@martinbowers852]

my friend Pete, i am using your advice to semi restore a 72 gmc, i wand to raptor liner it black, and clear it with colour shift blue pigment, what u think am i an idiot, never painted a vehicle before

[@radkesrods1184]

i knew something changed with the matrix i thought it was me. fuck! what about that acme FC270 shit?