I can click bait you to death, but you have plenty of fuckboy mustang channels doing that already. Enjoy.
Пікірлер: 350
@ricardosimon19755 жыл бұрын
Your are a straight forward dude i congratulate you😎👏 keep the videos coming up!
@80eddie265 жыл бұрын
I learned something new thank you Alex this is why I’m subscribed ! ! & I don’t even own a coyote car(yet) !
@thereissomecoolstuff5 жыл бұрын
Alex thanks as always. Big thumbs up what I have learned with my 18 Whipple is not to stomp it when IAT's are high. I have the stock Whipple CAI open system. It is open at the top and the bottom. Plus holes around the tube, lots of heat entrainment possible. I took my hoodliner off and am working on modifying my cooling vents in the hood and the rear hoodseal to try and get the heat out and cooler air in.. without changing out the entire Cai for a lided unit. If you get fired Cletus is looking for a canyon car tuner. Just got to make it fly..
@jessefrias25755 жыл бұрын
I droped in a k&n filter and also drilled out the front grill holes. It made a difference in iat’s both in traffic and cruising and no water issues at all. My car is daily driving and been driven thru some good rain storms and not a single issue with water getting into the inlet.
@thaieralawadh22232 жыл бұрын
All respect for sharing true information instead of marketing product that is not needed!
@MrSKlim5 жыл бұрын
Thumbs up simply for a solid video description lmao. Thanks for the info tho! I have longtubes and Lund flex fuel, stock intake. Tbh IAT temps always are within 10 degrees of ambient, everyone always asks why I don’t have a CAI, simply don’t need it. 🤷🏼♂️
@MASTEROFPUPPETS2385 жыл бұрын
Always introducing new insights into my rookie Mustang career
@Xtr3me855 жыл бұрын
Great video Alex, and please keep telling the truth, that’s why most of us follow you cause you are real. 💪🏽💪🏽👍🏽👍🏽
@crazygem99945 жыл бұрын
Thanks Alex always good info. Steeda for the 14 gts use the stock air ducting and shield the engine bay.
@pattda15 жыл бұрын
Solid video Alex You are looking fit / trim, keep up the good work and post up when you set a new dead lift best (Dave from Chicago)
@5.0_Draco2 жыл бұрын
This is exactly why I'm running my corsa cai it's the same exact setup as the stock and it's fabulous
@mr.roush67095 жыл бұрын
i don't care for white but your S550 looks good as hell with those wheels it sits just right!! Steeda makes a sweet cai now for s550
@sbtiger5565 жыл бұрын
Best CAI to stay close to stock and get slightly more air is the Injen Evolution. I used it when I had my 2016 GT and loved it. With just the intake and a tune I ran 412 HP and 387 TQ to wheels. Those where literally the only mods I had. Not much of the increase was from the intake as usual but the intake temperatures were 3-4 degrees above ambient with the Injen and 5-7 with stock while moving. They would creep up when in traffic but nothing like my GT350 does. I hit 151 degrees today with an ambient temperature of 82 degrees at idle. That’s what happens with open element intakes. And I’ve never seen anything less than 5 degrees above ambient in the 350 except in a cold winter morning with temperatures around 30 degrees
@marktiny89285 жыл бұрын
Great video! Exactly why I only put in a better flowing drop in filter.
@marktiny89285 жыл бұрын
dave j I went with a k&n. There is some other ones that may be a little better.
@zapracing52715 жыл бұрын
Good video man I have always thought this which is why I never bought one yet but everyone just knows you have to have one
@jdigitalseven75 жыл бұрын
Dry high flow Saleen filter in stock air box seems to be the best. Coldest air from fender and traps dirt well. Breathes good.
@TonerrrS550 Жыл бұрын
Great video, been going back and forth weather to get a CAI or not on my 2020 GT, all I have is a SR X-pipe. Will be getting a tune in the next month or so
@kloogyB333 жыл бұрын
This video would have saved me a headache of trying a cold Air. Dealing with high IATs then swapping back to the stock box for what felt like an improvement in comparison 👍
@sjp30423 жыл бұрын
I admit my first mod for my 11 GT was a K&N Typhoon CAI. Thought it looked awesome in the engine bay. I went to a Dyno Day at a local tuner and he said the metal air tube completely defeats the purpose because it absorbs the engine heat and feeds hot air in. Needless to say, I ditched the K&N and went back to the stock Airbox and my IATs are lower. Thanks for your honest opinions, love the channel!
@pvrrpghxst78672 жыл бұрын
I bought mine with a k&n Blackhawk and idk what’s wrong with it but it always made the car struggle after 6.3k rpm so I got the stock air box and now I’m waiting for a pmas
@gh05t_r1d3r5 жыл бұрын
I kept my factory airbox on my '13 GT with a K&N panel and just replaced the tubing for an Airaid one. Works well! I try to explain this to so many. Every expensive "CAI" I had in the past on previous cars always worsened performance due to high IAT numbers. In the fender or in the engine bay "shielded off," it didn't really matter.
@d.hayward52325 жыл бұрын
I am thinking of possibly going this route - would you say that the Airaid was worth it?
@karpetcm4 жыл бұрын
this is 100% true. My pmas in traffic or low speeds below 40mph is heat soak galore. Yes once im rolling for several seconds it hauls and I have a 2015 which doesnt have the better intake then the 18's+.
@jay46275 жыл бұрын
Airaid intake tube, with an aFe drop in inverted filter is basically the ideal setup you were talking about. That's what I'm running anyway.
@tommylee77495 жыл бұрын
Thats what i have too, but the air inlet tube is smaller going in the throttle body:( Know tune required...
@mrksts15 жыл бұрын
I reworked my PMAS and partitioned certain areas so that I get almost the same temp as stock on the highway, and it’s way better in traffic than out of the box. Completely happy with the setup, but to be fair I did have to get inventive to get results. Out of the box, IATs at long red lights were shocking.
@DucatiDiaries5 жыл бұрын
Thanks for sharing the knowledge brother
@coloradokid8082 жыл бұрын
My Steeda Intake uses the cold air inlet just like the stock unit. No bypass. All good all cool!
@bigdon22412 жыл бұрын
youre so right im thinking the same as you what i did is to install a kn in the stock intake
@brembojoe5 жыл бұрын
Dude I already knew this LoL keep em coming YOLO! My procharged 2012 mustang is toast . Now I'm sporting 18 gt350. Need opinion on twin or single turbo.
@614845 жыл бұрын
Steeda closed air box is like 121mm mass air flow should work nicely
@andrewtownsend91283 жыл бұрын
I'm thinking the same. Might just drop a K & N filter in for now.
@Saml013 жыл бұрын
K&N filters flow worse than paper elements. Been proven to death
@Andreallen43 жыл бұрын
@@Saml01 link for proof on that?
@TheModAddict3 жыл бұрын
@@Andreallen4 of course he dont have proof.
@umairejaz66653 жыл бұрын
@@Saml01 i also heard something about K&n what about air aide filter ?
@parkersmith7115 жыл бұрын
I thought it was well documented that PMAS was the way to go. After this video it seems that the route to go is a hi-flow filter and a smooth tube. Good food for thought.
@gioi88925 жыл бұрын
Somebody Didn’t get any nookie last night .lol Great vid and all the manufacturers need to leave are boy alone if not for Alex most of us wouldn’t own our be buying mustang parts. 👍🏼
@moyrod15 жыл бұрын
bad ass video bro, good info keep doing a good job
@JohnSmith-es8lj5 жыл бұрын
Great content Alex,thanks!!
@KyleSVT5 жыл бұрын
Great video Alex thank you!
@19explorersport965 жыл бұрын
Good advice. I only gained .05 with pmas. Not worth the cost or hassle.
@vxer10004 жыл бұрын
I put an Injen CAI on my 2015. Doesn't require a tune so you're using the factory MAF sensor, closed box design and it works. Ran 2/10ths quicker 1/4 mile in 2000ft worse density altitude. Keeps those air intake temps down as well. I put a little foam tape where the Injen meets the factory air inlet since it doesn't have the rubber molding like the factory intake and my intake air temps are about 6-7 degrees above ambient.
@dennylazzari81753 жыл бұрын
Hi vxer, I'll be getting the same filter soon, it's good to hear it works properly. What kind of foam tape did you install? I guess it must be temp/humidity resistant?
@vxer10003 жыл бұрын
@@dennylazzari8175 I found some foam tape at O'Reillys Auto. I used the thin stuff (maybe 1/8" thick). Not a perfect seal like the rubber factory seal, but better than nothing. Can't remember the name brand.
@MormonMustang_5 жыл бұрын
That's a great video Alex. Ford is now using LS1 aftermarket technology from 1998. The stock coyote housing is just like the aftermarket "whisper lid" that we used to get for Ls1 cars F bodies back in the day and we would do the "free ram air" mod that is now stock on the mustang. That alone was worth 15 rwhp on an LS1 car. This video gave me flashbacks of the LS1 aftermarket lid and free ram air mod. It looks just like the ls1 aftermarket induction except from the side.
@peterbeertema64945 жыл бұрын
Would be nice to see dyno numbers. I agree with you. It's the same on an F 150 ecoboost. Dyno numbers don't show any improvement over the stock air intake.
@garyking24804 жыл бұрын
Airaid design is the best then. It’s enclosed and works exactly like the stock design but you get more air. And it also still uses the ram air induction from the grille.
@umairejaz66653 жыл бұрын
Can you send me a link ?
@Rafaahh2 жыл бұрын
@@umairejaz6665 fr
@CarminesRCTipsandTricks5 жыл бұрын
.... Almost makes me want to try hooking up the Chrome CAI Tube to the Stock Airbox with a K&N Filter. 😲
@paulbramucci75863 жыл бұрын
Very informative vidio . Do they make a stock filter element such as k& n that can be substituted for original square filter that would let a little more flow?
@garys9718 Жыл бұрын
Afe makes a decent one for the edge st and other models, and they do offer a cover plate for the intake, too.
@400hpmustang5 жыл бұрын
I always scratch my head when I see the air filter hanging in the engine bay, drawing in hot engine bay air. The factory unit is just fine for mild mods, jmo.
@robwaters20655 жыл бұрын
Alex , great video !!!! If I put a 2018 intake on my 2015 . Could I used the 2018 air intake, or go aftermarket??
@fatknucklesproductions75175 жыл бұрын
K&N typhoon seems to be a good design was thinking of replacing JLT with it, for this among other reasons
@TheCdM19815 жыл бұрын
Most “non tune” cold air intakes for the new mustang make very little difference on hp for the new 18+ mustang. The difference is the restrictor in the air intake with a tune. The Roush for the 18+ has the restrictor that can be removed. With the restrictor it is very similar to stock with out it, it needs a tune and takes more air in. Simple. It’s not like cars from the year 1999. Stock parts are very good for high performance cars. Ford did a lot to squeeze as much power as they could out of the 18+ mustangs. So with that being said. The best intake in my opinion is the Roush Cold air intake for the 2018+ mustang GT which is very similarly designed to the stock intake with a shield and cover blocking the hot air out.
@theroadrunnerjarhead4109 Жыл бұрын
I have a 2018 5.0. A few years ago I replaced the stock intake with a roush cold air intake which came with a tune. It could run with or without a tune. There was nobody here who could install the roush tune so I’m running it without a tune. The throttle response is instant. Without the roush intake there is a little bit of a lag when I floor the gas pedal. Is the car faster, maybe not but it is quicker.
@jamescoley35435 жыл бұрын
Face is looking slimmer, your workouts are paying off.
@darrencorzan86403 жыл бұрын
Corsa Performance makes a closed box intake that removes the destructor as well for the 2018+ GT
@scottdonbrosky59682 жыл бұрын
Stock OEM with aftermarket filter or steeda closed cia for the win.
@kbdadriftking5 жыл бұрын
So Alex.... Do you recommend a cai that pulls air from the fender??? Will they iats be higher in traffic or due to the metal construction
@raymonddelacruz8465 жыл бұрын
Good info as always
@daf36255 жыл бұрын
What do you think about the power packs that ford created for the 15-17 that’s open? Did they f it up? What your saying makes perfect sense, so I wonder why ford made these the way they did.
@yellowfits92008 ай бұрын
If you are looking for a little more noise without causing any loss of performance I highly recommend the airaid intake modular tube , it works great, just leave the original box and that is all, no problems, your not going to make any extra HP but also not going to lose any but you can make more throdle noise
@chrisbouchard47195 жыл бұрын
Thoughts on putting the DEI gold foil on the intake? Road course car
@StLMikie5 жыл бұрын
How do you feel about the corrugated section of the intake just past the sensor on the CAI? Does it disturb the air enough to make a detectable difference? Even if a guy were to make a section of tubing that goes from the tb to the first joint?
@bryanharris35893 жыл бұрын
I had a steeda cold air on my S197 coyote but after researching about cold air aftermarket intakes ( this video included) it only gains about 8 hp advantage over the factory cold air if that. I reinstalled the factory cold air and now prefer how it looks even. It kind of makes it more of a sleeper, LOL, if you can call it that anyway. I've thought about the K&N modular intake tube but the price just makes me want to cringe.
@jaycamacho81793 жыл бұрын
Im installing mine tomorrow. I just uploaded my 93 Lund tune to my SCTx4. Not really expecting too much but I got a used system for $200 so I said fuggit lol
@Zander13Productions5 жыл бұрын
great video and this is something I have been thinking about lately. I am curious about going back to my stock air box for drag racing so that IATs are not insane staging up to the tree. High IATs rob HP, so if I can bring those back down, I wonder if I can improve getting out of the hole faster and harder. I have e85, headers, CAI and pulled my interior. I raced another 18 with same final gears, he had full interior and only e85 tune. we had same tires and we both cut the same 60 and trap speed, mph, everything.
@sweetcheels5 жыл бұрын
Zander13 were you pissed to see that time sleep?
@mattjones13785 жыл бұрын
"robust and thick" that's what she said
@OGStoneVegas4 жыл бұрын
WAYOHHHHHHHHHHHH
@skillz_311 Жыл бұрын
I know very little about cars but I have recently been trying to put a little money into my 2017 Ecoboost Premium. I know I'm not going to get a V8 roar so the next best thing is the beautiful sound of the turbo. with what you were saying about sticking with something close to stock.... That sorta suggests that I should go with the closed box option like AirRaid, but once the hood is closed, the Roush option with the shield... wouldn't that suffice?
@giab93173 жыл бұрын
Hi I like your videos. My question is snorkel snorkel intake. There’s only about three open honeycombs in the girl. If I drill out a couple more honeycombs to get more air down the snorkel is that a good idea. Or will it help get more air into my airbox.
@justa5oh1365 жыл бұрын
Hey Alex what’s you’re take on tru cold air that pull From the fender or bumper?do you recommend heat wrapping them or not necessary.
@lx347cid5 жыл бұрын
To me when you say cold air intake i only think of the type inside the fender like the jlt i have for my cobra. For my 17 gt im keeping stock with kn.
@sublimegt5005 жыл бұрын
Another good way to lower your iat's is to use a VMP dual fan heat exchanger yeah? although I guess that's for blower application only correct?
@UnorthodoxMasterOfGames5 жыл бұрын
*Post 42* Coyote Breastmilk squirts just fine with a Ford cold air intake, especially Ford's 2018+ milky cold air induction systems
@bpena5 жыл бұрын
How’s the ‘18 intake bolted to the gen 2 coyote in the red car working out? Wondering if there is anything to be gained here over the stock gen 2 intake.
@mrblackbond4 жыл бұрын
Great info !!
@Lg1969 Жыл бұрын
Alex you know what be nice if a company would make a see through cover only for a stock cold air 2015-2017 model... That would be sick...
@treevans-dumaran81365 жыл бұрын
Does this mean I can put a gen 3 intake in my gen 2 for an upgrade?
@justinyoung53485 жыл бұрын
Yepp, sucks my Procharger IATs run through the roof here in MD while I'm in traffic or creeping in first and it drives me insane.
@SaVarMatner3 жыл бұрын
K&N drop in filter......best bang for your buck 💪💪💪
@jorgeramos69815 жыл бұрын
Hay Alex quick question do you believe putting a gt500 hood on a gt mustang would be a simple way to get clearance for a cobra jet intake manifold I mean if it clears a supercharger would it clear the intake manifold thx and have a good one man
@topnotch95572 жыл бұрын
Hi, just asking I have 26"s on my 2019 could you tell Mr what should I do to make my engine handle the extra weight and could u send me a link to upgrade my bushings and any thing that I need to slow the wear and tear of the wheel housing thanks just looking up to u for advice
@vinny_vlo11 ай бұрын
Bro explained it perfectly
@JR-us1ne Жыл бұрын
Does make it sound a bit better imo. Even if it doesnt help with hp.
@CarminesRCTipsandTricks5 жыл бұрын
Ah yes my friend... We get older (I'm 55!), and we finally realize that not all shiny things under the hood are necessarily the best option for our Rides!!! 😲 Seriously though, you're right. That 18-up Coyote intake setup is incredible for a CAI!! 👍👍 BUT, for us guys who like our older Stangs.... The Stock Intake SUCKS! 😖 And I'm referring to SN-95 & S-197.... I'm actually surprised that NOBODY made a CAI with a Closed Element and enough plumbing to run a 4" Tube to the Grille. Wouldn't it work???
@TheDankestBum Жыл бұрын
Hey Alex you started touching base on the turbulence and the design of the air box. What do you think about drilling out the rest of the holes in the grill?
@hdz12ez5 жыл бұрын
Good advice
@shawnsanders94505 жыл бұрын
Do you notice IAT'S from the stock box getting higher than previous Coyotes? I have never owned a gen 2 car but my last Mustang was a 2013 with stock air box, E85, Kooks LT's and the IAT'S on that car seem to be better than my 2019. My 2019 is still stock and the shocking thing is I haven't owned it long enough to see summer yet. The IAT'S seem to go up quicker and stay there longer than my gen 1 car.
@umairejaz66653 жыл бұрын
What about the ford performance cold air intake with tune ? That ford came out with the 2018 plus mustang gt's
@Smurf345. Жыл бұрын
That's why I like the Corsa Cold air intake.
@krownvikkhris3004 Жыл бұрын
My question is do the Ruffles in the intake tube actually slow down air flow because my intake tube on my 2006 Crown Victoria has Ruffles similar to that also and I was wondering should I just remove that intake tube and put a smooth intake tube to replace the factory one
@edburr32275 жыл бұрын
D mark or rev auto is pretty beast tbh
@DiruKev5 жыл бұрын
I'm going with an Airraid for my 13' Boss 302
@blueridge89925 жыл бұрын
Ford has been giving us cold air inlets running from the front grill for years now. Intake manufacturers should have adapted by now to use the stock inlet location to feed a new closed box designed with air flow in mind. It's like the innovation in this area stopped 15 years ago for some reason.
@francetg5 жыл бұрын
My 16 gt with a pmas has gotten up to 170 w/ iat's sitting in traffic here in az. Fun stuff.
@gh05t_r1d3r5 жыл бұрын
That's crazy.
@Tender_vigilante3 ай бұрын
I’m from az. Do you think it was worth the purchase? I’m debating if I should get a pmas but due to the hot temps in THR summer I’m not sure if my car would like it
@francetg3 ай бұрын
@@Tender_vigilante after going fbo and a flex tune, yes, definitely.
@Raptor_4285 жыл бұрын
More S550 content dude 👍
@Jonathan10035 жыл бұрын
Cough cough Steeda closed air box definitely the best
@mike90185 жыл бұрын
Yeah seems like it. They’re running it along with a CJ intake on their 10sec N/A car
@YDBT4LIFE5 жыл бұрын
Their maf signal isnt the cleanest.. they will be revising it soon
@remander38735 жыл бұрын
@@YDBT4LIFE Alex, any update on this? I'm looking at CAIs for my 18 GT currently. Great info. Everyone seems to go JLT, but great point about the IAT. If the Steeda MAF signal is wonky, I may stick with the stock for now and just add a tune in the short term.
@YDBT4LIFE5 жыл бұрын
Stay stock until you go Max effort
@remander38735 жыл бұрын
@@YDBT4LIFE Thanks, man. Will likely be going with your flex tune, as I daily it and only have reliable E85 close to home. Will probably save headers, x-pipe, CAI for next year.
@ShiftWork245 жыл бұрын
Have you dealt with the corsa closed air box cai for gen 1 coyotes?
@mustangscott76945 жыл бұрын
Hey Alex,, I have whipple st.2 on my 18, my kit came with the open air box. I saw that whipple offers a closes air intake now with their kits. Do you think I should order one from whipple. I don't think they offered it last October when I got mine. Any info woukd be appreciated.
@brianneal92045 жыл бұрын
Nice Video Alex. Keep it real. Now peeps can go watch Cleetus bog deep or Its just a 6 squeal and giggle like a little girl.
@MyKr0b235 жыл бұрын
Is this the same for 2007 Gt Mustang with the 4.6L than this 5.0 2018 ?? You recommend to stay with the stock cold air system??
@zanez96085 жыл бұрын
Does any one make a closed box for whipple stage 2 or will it not really matter if the intercooler works good enough
@toddjarreau85504 жыл бұрын
Hey Alex can I take a stock 2018 AirAid Intake and put it on my 2015 Mustang GT?
@jaimedelatorre48795 жыл бұрын
Is the roush CAI worth it since it’s a closed air box and works with ford directly.
@saleen3675 жыл бұрын
I've been telling people this for 2 years. The aftermarket CAI kits are senseless in a NA car. If the CA box doesn't seal it from the engine compartment completely, your defeating the purpose of having one to begin with.
@Youngsoldier933 жыл бұрын
Thank God roush makes a closed one but for $400.... ehhhhh
@theguy12245 жыл бұрын
Hey alex, i love your vids. Why not team up with some other youtubes to do some sort of challenges? Or do you not like to get involved with other channels because maybe you see them as competition? I think if you got together with fasterproms, who's also in florida, i think that would make for a wicked video. Ford vs chevy. Or GM for him since he does a lot of GM cars. He's also really cool and doesn't seem to be stuck up like cleetus so i think that would make an awesome vid. Either way i'll keep watching these vids even though i'm a corvette guy lol
@justa5oh1365 жыл бұрын
Jake other KZbinrs are in the circus business.. I don’t think Alex is cut from the same fabric as these other fuckboo.... I mean other KZbinrs
@hialeahhigh5 жыл бұрын
So then in “your opinion Alex” the Steeda closed box design is that good? Based on the ones you’ve tuned compared to like a P.....s ot J....T? 😳😬 i’ve heard Pmas has a cleaner maf signal. Hope Steeda revises it.... i like my pmas but damn it sucks every time it rains and the car is parked i have to cover the filter up so it doesn’t get wet! 🤦♂️
@biged21934 жыл бұрын
was thinking Steeda closed box thoughts?
@LongStroke3515 жыл бұрын
Steeda closed air box FTW!!! Fastest 2018 CAI on the planet. #Facts Great video Alex.
@luismanuelramirezdiaz18922 жыл бұрын
What do you think about the JLT cold air intake? For a Mustang 2015-2017
@keithlynn35218 ай бұрын
Would like to have seen a dyno run with stock and after market compared side by side.