What Did I Change Now??

[@journeywiththerocks]

If you plan on doing a stage 2, just wait until you do a cam upgrade. That way, you won't have to tune twice.

[@Southern_Hogz]

That makes sense. Thanks for the input and for watching! 👍

[@CoolRide-Esquire]

I have the Rinehart slip ons, screaming eagle breather, and a tune. It is a stage one and it added a little more power that I can feel. But over next winter it is my plan to do some headers and a cam for a stage two. That will be all the power that I need.

[@Southern_Hogz]

I hear ya. I think stage 2 is as much as I would need. Thanks for the info on how the stage 1 did for you. I appreciate it!

[@gregduncan1001]

Thanks for the ride and conversation here's what we learned have pretty much same bike ,good choice on shocks, have the mustang supper touring heated seat 2"back must have I'm 6,1 Do a tuner first the thunder max is the one to have, if you want more power after that get the woods 222 cam and a Send truff school pressure, play. So your clutch don't slip with the 100. 12 pounds of torque that it would be putting out, You have to have a tuner to do a cam. But you may be satisfied with the power increase from just the tuner. It's up to you. Everything has a cause-and-effect. You will lose on gas mileage when you start. Doing changes for more power.

[@Southern_Hogz]

Man, thanks for watching. I've heard a lot of good things about the Woods 222, and that's kind of what I'm leaning towards. And thanks for the heads up about the pressure plate! I appreciate it!

[@kellybgliding]

Stage 2 is worth it. I did the Star Racing 30/30 .485 cam. I’m subscribed

[@Southern_Hogz]

Thanks for the info! I'm definitely planning on trying to do the stage 2. And I appreciate you subscribing! 👍

[@deelzridesandadventrues]

I have a modular helmet, a LS2 Advant X. With a Cardo com set. Your audio is great! Mine sounds crappy and I get alotnof wind noise. What kind of set up and how do I get my audio sounsijg as good as yours I use a GoPro, Panda mic and adapter.

[@Southern_Hogz]

I don't know about GoPros. I use the DJI Action 3, which has a decibel setting. I have it set to the lowest setting (-12), run a volume controller between it and my mic. I use a mic I saw Full Throttle Hog was using. It was about $26 on Amazon. Any volume adjustments I want after that I do in editing. And I have my mic ran inside the foam cover of my Sena mic to help buffer any outside noise, but the Sena mic is just for phone and comms use. Glad you like the audio.. getting it right is like finding a unicorn, ha. Hope that helps some.

[@Southern_Hogz]

I might add.. if your mic volume is a little lower, you can increase it in post edit and get decent sound, but if the mic is just too "hot" there's nothing that'll help correct that. I had one that was way too hot and had to switch to this one.

[@raygregoryride]

Nice bike like that seat thanks for the ride

[@Southern_Hogz]

Thank you sir! I appreciate you watching. 👍

[@CoolRide-Esquire]

Lol, post man was riding hard 😂

[@Southern_Hogz]

Haha, yes he was! First time I've ever seen them in a hurry!

[@tld522]

Audio seems good!!!

[@Southern_Hogz]

Thanks man! I'm always trying to tweak it, ha.

[@bobhartman2571]

I've done a stage 1& 2 through Harley. But I did do them together, so I only had to tune the bike once. Yeah your warranty through Harley may only allow you to use Harley stuff. I got the low end torque cam. It did show a market change gain starting from a stand still. So, I think it was worth it. I have a 2020 Electra Glide with a 107 engine. Your bike is looking sweat.

[@Southern_Hogz]

I'll probably go that same route and do them both at the same time. Thanks for watching, and I appreciate the feedback!

[@gregduncan1001]

Centrifugal pressure plate darn spell check.

[@Southern_Hogz]

Haha.. I hate it too!

[@WitheBusiness]

How many miles on Engine, may be good idea go ahead do oil pump timing chain conversion and that point yes Cam is out do it.

[@Southern_Hogz]

Haven't thought about that. I've got between 20 and 21k on it right now. It'd be worth checking on that stuff while I'm at it though. Thanks

[@WitheBusiness]

@@Southern_Hogz check out my chanel I ride a stage 4 2004 e glide and few others take care!

[@allentraylor5659]

Never tell anyone you hate HARBOR FREIGHT TOOLS, BECAUSE YOUR BASICALLY SAYING YOU DON'T KNOW HOW TO USE TOOLS... LOL

[@Southern_Hogz]

😄 Haha, man, that's my first stop EVERY time I need tools! And I've never had any problems with anything I bought there. Thanks for watching!

[@jacaughron55]

I just can’t justify the price in his seat …

[@Southern_Hogz]

Not cheap.. but cheaper than a lot of them on the market.

[@garysilva4373]

Wat type of highway pegs do u have? Can’t walk, im on a trike.

[@Southern_Hogz]

Man, I think they are Harley pegs.. they were on the bike when I got it, so I'm not 100% sure. I'll have to look. Thanks for watching, and props to you for still getting out there and riding! That's awesome!!