❤ If you liked this video, 🙏 share this video with your friends 📈 it will help the development of the channel! ❓ ask your questions
@MrJhockley Жыл бұрын
My current bike is still going strong after 6 years of rainy cycling. Bottom bracket and hubs still spin like new. Rarely gets washed but usually with a low pressure shower. There's obviously more to this story.
@rastislavstanik5 ай бұрын
if you deep clean it now, it´ll work for another 6 no problem :)
@robertstark69 Жыл бұрын
Rain and humid air would have caused similar damage. What we don‘t see: grease. Instead we see a neglected hub. This is what happens if you skip service (and tighten things too much). I think that the bottom line is that you should service (grease) your hubs in time to prevent corrosion.
@InsideGardenkorea Жыл бұрын
what do you meant by "service" like regreaseing the hub?
@joh141 Жыл бұрын
I love that magnet. Just had to regrease and replace the bearing balls without one and for you it looks so easy!
@koos42 Жыл бұрын
I love all of the nice little tricks, like having the washer and nut ready to use a skewer to hold the freehub removal tool in place, and all the cups to hold the bits that come out.
@robertmcfadyen9156 Жыл бұрын
I blend rust inhibitor into the grease in all hubs before a wheel build similar to that used by some motorcycle manufacturers to prevent this problem depicted in the video .
Very interesting! I fell over in a flood this winter and I suspect both hubs got immersed. Within a month I'd had to replace my rear wheel as the freehub jammed up, then the front hub started making loud cracking noises. The bearing faces were all pitted. The wheels had done a fair mileage, but I'm almost certain this was what caused the final failure. I replaced both wheels as the rims were quite worn too. Your video convinced me of my thoughts.. Thanks.
@azraeldarkangel331 Жыл бұрын
Totalmente de acuerdo...no lavar con agua...lavar en seco, usar únicamente desengrasante...excelente vídeo 👋🚴🇲🇽
@fernglez6010 ай бұрын
Nice camera work!! Thank you!!
@NiceBikeService10 ай бұрын
thank you for your comment! ❤️❤️❤️ Share this video with your friends, it will help the development of the channel! 📈😘
@TheRokko66 Жыл бұрын
Der Konus hat starkes Pitting und muss neu. Ebenso die Kugeln. Das kommt daher, dass die Nabe lange Zeit nicht gewartet wurde, Schmutz und Wasser eingedrungen sind und das Fett ausgewaschen haben.
@NiceBikeService Жыл бұрын
Vielen Dank für Ihr Feedback. Leider sind die Konen für ein bestimmtes Nabenmodell oft nicht überall erhältlich.
@Raumance Жыл бұрын
It's incredible how these can be built and how long they last.
@diederik19882 ай бұрын
You know, wash your bike with water, but you have to get out of the turn with a garden hose, stay away from your hub, otherwise you will squirt out grease.
@NiceBikeService2 ай бұрын
😸
@tomaskozler48568 ай бұрын
do not wash your bike with water. and what else then? hugs and kisses? maybe also do not cycle in rain? maybe, you know what.... what the best prevention is? do not cycle at all. have your bike mummified and it will last 5 friggin thousand years. to brake down the technical concerns about the message 1. is it rust actually? I have doubts. 2. isn´t enough of grease enough of rust prevention in there? 3. if this was indeed damage caused by non pressurized intake of water, isn´t the problem maybe loose hub seals due to things like incorrect installation, wear and tear, crash trauma, maintenance neglection or maybe just cheap make? 4. in a normal shower there is nothing happening what isn´t happening on a rainy ride. and a rainy ride should be something bikes should take. did you mean pressure water? then we don´t call this a shower in English. and 5. specifically in winter when you may have hit a salted road, a shower is exactly the very best thing that can happen to your bike or else stuff goes wrong a lot faster than clean water damage can ever dream of.
@NiceBikeService8 ай бұрын
Thank you for your feedback! 😘
@skillz0815 Жыл бұрын
But how do i clean my bike if not with water??? My rear wheel started makinf noises after the first cleaning...... Is this really a result of the cleaning itself?
@thedeafgamer Жыл бұрын
Hej! detta är väl bara om man inte torkar den rent och torr med trasor?
@shubhamlokhande1140Ай бұрын
May i know the tool u used to open the rear hub inside cap
@carlitoxxe0 Жыл бұрын
Hi! After that, the only thing left is to replace the HUB, which means to dissasemble the wheel and build it again with the new HUB, isn't it? Thanks
@jed954 Жыл бұрын
Hele nuttige en reële video; very useful and real video !!
@JavierVargasBG6 ай бұрын
Masa marca Giant? Me gustan porque traen sus cubre polvo o protectores mejor que las shimano
@NiceBikeService6 ай бұрын
Había un nuevo buje aquí y sus sierras no hicieron su trabajo
@Procktorful7 ай бұрын
Hallo, tolles Video. Welches Fett empfiehlst du für die Kugellager? Mach weiter so. Viele Grüße
@NiceBikeService7 ай бұрын
Vielen Dank für Ihren Kommentar. In unserer Werkstatt verwenden wir Divinol dickes Kalziumfett, aber Sie können auch jedes andere Kalziumfett verwenden.
@Procktorful7 ай бұрын
@@NiceBikeService Ich habe mir das divinol top 2003 Kalzium Fett für Wälzlager und Kugellager bestellt. Danke für den Tipp.
@maximolotov Жыл бұрын
how do you supose to wash bike ? with water ? is not shower have same water ?
mmmhh....which means....if it rains outside and I am inroad, I have to stop...as water is the enemy....bit strange, isn't it?
@jed954 Жыл бұрын
Cycling in the rain is not always avoidable; but cleaning your bike with high pressure water is absolutely stupid!
@elgrupo2069 Жыл бұрын
@@jed954 agreed, high pressure is never good but taking the shower of your bathroom shouldn´t make the difference. The bearings are protected with seals.
@ExileLTU Жыл бұрын
@@elgrupo2069 my brother and myself work as bike mechanics (brother has plenty of certifications on bearing maintenance and other stuff after working as a Heavy duty Truck mechanic for many years) and we both wash our bikes in car wash, used our bikes in rain and etc not once we had an issue. But bear in mind we grew up with bmx bikes that have Sealed bearings and mountain bikes that also use sealed bearings, which do not care if you wash them with water or pressure washer that you can find at a self service car wash. These issues are primarily as i call "skill issue" on the user part and using lower end cheaper equipment. Cheaper bikes with loose bearings are prone to many issues. If you know what youre doing washing your bikes with pressure washer or a garden hose is perfectly safe and in fact should be done, as far more often we get clients who never wash their bikes come in all surprised why their gears dont work or experience "skips" when putting in more torque (e.x. chain thats lubed with improper lube like Motorcycle chain lube and pulls in all the dust grime and all sort of other shit) and after taking a look they have to spend ~100eu to change the chain, cassette and sometimes even the front chain ring.
@kaspervestergaard2383 Жыл бұрын
@@ExileLTU This guy makes it sound like if a raindrop falls on your bike it's all over.
@tomaskozler48568 ай бұрын
@@jed954 do you you usually take a shower with high pressure water?
@kamilcraftsman4255 Жыл бұрын
I tak myje i myje i jest ok. Servisuje olivie. Umyję pod prysznicem
@OM-jc9mh Жыл бұрын
तो क्या फिर बारिश में सायकल नही चला सकते?
@FuchsHorst Жыл бұрын
Mostly old grease not rust. Bearing damage probably due to impact or too tight adjustment. That said probably not worth to recover.
@MTBtoscana Жыл бұрын
Un bel passatempo 😄👍
@robertmcfadyen9156 Жыл бұрын
I have never had freewheel body clutch springs fail on me to date .
@TheRokko66 Жыл бұрын
Replace the Rotor (freewheel)
@NiceBikeService Жыл бұрын
It's easier, but you'll have to replace the chain and possibly the cranks.
@MyanmarPyi-uq2kt Жыл бұрын
What spray use for cleaning
@MyanmarPyi-uq2kt Жыл бұрын
@@NiceBikeService please recommend other
@GaLaxY-1905 Жыл бұрын
water is the enemy of the bike
@olivermtb4596 Жыл бұрын
Same
@anschn71665 ай бұрын
What is the point of a bike if it can't resist rain??
@NiceBikeService4 ай бұрын
Well, it's not like it's a water bike.)
@philippejoseph8604 Жыл бұрын
Réparation ou bien autopsie ? Repair or autopsy ?
@yosiko2123 Жыл бұрын
高圧洗浄やシャワーシャンプー洗車がはやってますが 私は全て分解清掃w
@moktak-boy6077 Жыл бұрын
分解清掃は大変ですね😂
@lordllewellynofdarkdelight2613 Жыл бұрын
Oops! Good to know.
@anastasiia7600 Жыл бұрын
Доброго дня, порекомендуйте засіб яким ви оприскуєте деталі для того щоб відмити їх
@anastasiia7600 Жыл бұрын
@@NiceBikeService дякую !)
@rizaldiryanryan11 ай бұрын
Happened to me after take the bicycle to the beach for photos
@NiceBikeService11 ай бұрын
thank you for your comment! Share my videos with your friends, it will help the development of the channel! 😘
@julianofabiomartinsdelima9601 Жыл бұрын
Então como devemos lavar a bike?
@Polojerolo Жыл бұрын
czy będzie 2 część jak to naprawić?
@henrikenchefke4709Ай бұрын
waar zit u met de reparatie service
@NiceBikeServiceАй бұрын
We zijn gevestigd in Kyiv, Oekraïne
@전태호-m7u Жыл бұрын
샤워기가 얼마나 세면... 난 맨날 샤워기로 세자하는데 1년에 한번 정비해도 저렇게 안되던데...
@colonist2187 Жыл бұрын
10년된 자전거 가져와서 오바 떠는거죠 머 먹고 살려고
@legolasis Жыл бұрын
아마 언젠가 프리허브 나갈겁니다 ㅋㅋ 저도 그랬거든요. 19년식 스웍입니다.
@wojtekfus6406 Жыл бұрын
Nice macro!
@falcoperegrinus827 ай бұрын
Is shower water worse for a bike than any other type of water? Wtf is this?
@NiceBikeService7 ай бұрын
any ingress of water into closed components of the bike is undesirable, this is just one example
@MrKrepel1920 Жыл бұрын
Gdzie można kupic taki magnes
@GodOfHitrost Жыл бұрын
удивляюсь твоему порядку на рабочем столе. У меня как ремонт, так всё на свете на столе и хер найдёшь там что-то
@robertmcfadyen9156 Жыл бұрын
Boron coated cone nuts and races are the answer . My clients bicycles never end up like this due to scheduled maintenance programs I implement for them . My own bicycles are treated much better than I treat myself . Probably.a Prowheel , Quando or NL Industries or Joytech hub .This video shows one of these low - tier brands . I avoid them .
@robertmcfadyen9156 Жыл бұрын
The magnetic telescopic whip used to retrieve small magnetic objects will lose its effectiveness over time . I use a lilac style capillary scalpull to retrieve bearings instead as it has a release and compression of vanes feature in case the bearings have lost their magnetism which can happen as they are not made from ferrite steel .
Tohle neni tim že někdo jednou umyl kolo vodou... Je to zanedbana údržba náboje. Trochu zavadejici nadpis videa 🤷 pritahuje to vic pozornost 🤦
@pippopluto7524 Жыл бұрын
E dovevi farlo prima questo video mi avresti aiutato a sistemare il mio, comunque bravo bel video, purtroppo quel tipo di mozzo ha diversi punti deboli, a te si è rotta la molla a me invece si è rotta una delle rondelle molto fini e i pezzi sono andati dappertutto (bici nuova 300 KM). Quel mozzo porta pignoni si trova a 15/20 euro su Aliexpress ed è uguale, chi ha quel mozzo conviene averne uno di scorta si fa presto a sostituirlo visto il basso costo e si ha una bici sempre scorrevole.
@prosperovirgillito9230 Жыл бұрын
Se lo fa, penso che al mondo e solo lei e qualche altro che revisiona i mozzi, dopo avere lavato la bici 😂