What Is PTFE Fuel Hose? Worth it? | Amazon Evil Energy Fuel Line Review |

* Evil Energy Cyber Monday Event Going On RIGHT NOW . Link Below!*
www.ievilenergy.com/
#E85 #EVILENERGY #E85FuelLine #PTFE Fuel Line Kit #PTFENylonBraidedFuelHose #100MicronInlineFuelFilterforGasoline #Diesel #e85
In this video we will be going over what exactly is PTFE Fuel Hose and if it's a good value for what you need it for. PTFE fuel hose has a white teflon liner that is very resistant to different fuels, oils and chemicals. around the teflon liner is a stainless steel braid that Protects the teflon liner and protects the ptfe line from deforming. Surrounding the stainless steel braid is a nylon braid that not only looks good, it also protects the stainless braid from abrasion. We will be going over the pros and cons of the PTFE fuel line and whether or not it is a good value and option for your project or not.

[@user-br6qs9fy7x]

I'm doing my entire vehicle in Evil products, it's an 88 Burb. so far so good.

[@NightWrencher]

I havnt had any issues yet 👌

[@clemm1012]

Great video, thanks for the knowledge 👍🏻

[@NightWrencher]

I appreciate it 👍

[@clemm1012]

@@NightWrencher yes sir anytime

[@innovativepowersports]

Nice video, Quick tip: Wrap the adjustable wrenches with some black tape. Just one or 2 layers max. Not too thick. No tape? Don't remove the wrenches while tightening and if you do, put them in the same exact spot on the fittings to prevent scratching the entire fitting.

[@zapa1pnt]

You also increase your chances of damaging your fittings by having your adjustable wrenches: (1) Loose on the fittings (2) Turned the wrong way, for tightening ( @10:22 ) Best wrenches to use, for such fittings, are flare nut wrenches (also best for brake lines). 😁✌🖖

[@NightWrencher]

Well #2 my wrench had skipped so I was readjusting it 😂

[@GNaron]

I have been clamping the tool Eval sends with kit into a vice and pushing the nylon hose onto the ferrule.

[@NightWrencher]

I've gotta try that

[@GNaron]

@@NightWrencher On AN6 it goes easier than you think, so keep checking how far the hose is going into the olive. It's hard to pull the hose back without messing up the olive. 8AN and up, not so much. Unless you are the type of guy who snaps off LS damper pulley bolts.

[@TheProchargedmopar]

👍💪

[@NightWrencher]

👊💪

[@gfbemc0256]

White Teflon is ok for engine oil or engine coolant, not for gasoline.

[@infamousnova]

I wonder how durable it is and if the filters work as good as other brands.

[@NightWrencher]

Theres only 1 way to find out 😎

[@infamousnova]

@NightWrencher Your right, Evil send me a care package 🤣

[@Kingcadillac816]

So far orb fitting doesn't have a machined spot for the o ring all threads

[@timweb1510]

Easy to have a good opinion when you get the item for free

[@NightWrencher]

It is, even easier when you actually buy the product and then are given some for free after 😂 kinda like a bonus prize

[@rdspeedfab]

Did you miss the part where he bought a bunch of it first? lol

[@gfbemc0256]

I am pretty sure that you are supposed to be using carbon impregnated teflon hose for fuel. The teflon will be dark gray or black if it is carbon impregnated. The flow of fuel thru the hose could generate static electricity, the carbon impregnation dissipates the static electricity. All rubber fuel hose is carbon impregnated, to dissipate the static electricity.

[@NightWrencher]

That's interesting, never heard of this mentioned. I'll have to check it out but I've had this style of fuel line checked and it always passes tech so I'll look into it

[@innovativepowersports]

Supposedly the static shorts thru the teflon to the braid causing pinholes which could later cause a fire. Not sure how true it is. I have carbon on my car now but I also got some pinholes lol so I am trying to research some fuel line. I only need a foot. Seen this stuff pop up a few times.@@NightWrencher

[@NightWrencher]

Very interesting. I'll have to dig deep into the topic because it does make sense.

[@greatestevar]

😢

[@NightWrencher]

Why are you crying 😂