WHAT IS THE BEST DAYTONA FLOOR JACK AT HARBOR FREIGHT?

[@turboeddude]

Damn yo, inflation really hit hard. Can’t believe these were that cheap only 3 years ago.

[@TheAnointedOne7]

Seriously, I was thinking exactly the same thing ... shit's sad

[@sanangelo7926]

Yep. But no mean tweets is worth it I keep being told

[@pooshiesty]

209.99 vs 289.99 in 5 years for the super duty

[@FrogFishLeezerd]

I LOVE the 3 ton low profile, long reach. It has the fast foot pump, plus it goes lower and higher than all the other Daytona jacks. It really is a solid piece of equipment and gives me the most versatility out of the bunch.

[@XAnonymousGuyX1]

I’m due for a new jack, my current ones about 12yrs old. The long reach, low profiles the exact one I’m thinking I’ll get.

[@Bassin_withaustin]

@@XAnonymousGuyX1did you get it cause I just picked up one today and am gonna be using this week

[@coburn_karma]

Exactly reasons for my purchase. 👍

[@jonathanb1987]

Yep I just bought the low profile long reach last week. It's great!

[@23x31]

I lift the car with my hands then kick a huge boulder under it.

[@YoungHKim-dk3rg]

a toy car k

[@vermbird8393]

i put a deflated hot air balloon under my car, lit the propane heater and the car went 20 feet off the ground when the balloon was full then i needed a ladder to rotate the tires.

[@YoungHKim-dk3rg]

@@vermbird8393 Quit trolling bro.... you are not funny either.

[@vermbird8393]

@@YoungHKim-dk3rg hey mr kim, read roginski thread above about the boulder there are lots of ways to jack up a car. i think it was funny, yu have no sense of humor but jesus still loves you and you will go to the pearly gates of heaven with the lord his holiness jesus christ our savior.

[@griefinandcreepin]

that’s because you’re just built different, like myself

[@nedvlt1767]

Every mechanic needs & respects an awsome jack like this one Great review mate

[@cctvspystore]

I bought the Original Yellow 3 ton for 179.00 3 yrs ago when they were still in the midst of the lawsuit with Snap-On. It was the only one available at that time but prolly would go with the lowest profile 3 ton version today

[@armadillotoe]

It would be difficult to give up the 3-year warranty with the original jack.

[@zaineridling]

Lawsuit was dropped when it was found that the Chinese manufacturer made both jacks in the same factory! Chevy or GMC -- it's the same. Go figure.

[@alalal123421]

@@armadillotoe yeah is that the only difference otherwise lift height and reach are very similar i think the original yellow is still better for the extra 20 bucks?

[@captjay7823]

Why does Prolly prefer the low profile one.? I think I have the low profile model ("yellow").

[@KRTLyfe]

Great review! I thought I was the only person that gets this excited about floor jacks now I know I’m not alone! 🤣🤣🤣🤣

[@joelthiago3059]

I guess im randomly asking but does anybody know of a trick to get back into an Instagram account..? I somehow lost the login password. I would appreciate any tricks you can give me!

[@turnerkane573]

@Joel Thiago Instablaster ;)

[@joelthiago3059]

@Turner Kane Thanks so much for your reply. I got to the site on google and I'm trying it out atm. Takes a while so I will reply here later with my results.

[@joelthiago3059]

@Turner Kane it did the trick and I now got access to my account again. Im so happy! Thank you so much, you saved my account :D

[@turnerkane573]

@Joel Thiago No problem :D

[@harleyadam4813]

I bought the 3-ton low profile long reach jack for myself. It has plenty of weight capacity for my needs, and I know for a fact it will easily go under my mother's 2007 Corolla S and lift my 2002 RAM 1500 Quad Cab 4x4 from the frame rail lickety split. I got it on sale for $179.99, so I was very happy with the price, too.

[@DonnieDarko1]

This is exactly what I was thinking about, finding convenient storage and portability solution, thought they'd all be too big. Was it the red one?

[@d.e.b.b5788]

@@DonnieDarko1They all come in multiple colors. My 3 ton long reach ultra low profile is bright green; I learned not to buy another black jack, after accidentally kicking it or tripping over it numerous times. Bright green and it never happens. I needed the long reach low profile to get under my Porsche 928, yet it works great on my Expedition, too.

[@OUSWKR]

But will it roll over a zip tie🤔🤔🤔🤔🤔

[@JustinDowDIYcentralhighway]

lmao!!

[@georgebarnes4410]

No. I have one of these and it will not roll over a zip tie

[@tonyrowe1455]

Hahaha! Good way to eat the handle!

[@robinkuruda5249]

😀🤣🤣🤣🤣🤣😀🤣🤣🤣

[@greggmuse5597]

Yes , all the Harbor Freight Datona floor jacks will roll over zip ties that are laying on the floor. The front wheels on all Dayona floor jacks have curved wheels (inside of the front wheels to the outside of each front wheel]. Most all floor jacks don't have curved front wheels but have flat front wheels. Gregg Muse

[@strobaholic]

Hello, I’m from the future (2023) the price of the 4ton model is $240 at harbor freight😩.

[@julioocampo9755]

180$ now with itc membership

[@LeviWalton777]

@@julioocampo9755$144 tomorrow only (40% off)?

[@TheDannytre]

In my area, the same Jack is on site with a coupon for $169!!!!! compared to $240

[@XxChrisxX51]

All the jacks at HF are good choices. Me personally i got the 3 ton low pro Pittsburg and its been nothing but great and ive lifted everything from low ass hondas to full size trucks. Great video Justin.

[@MaynardFreek]

I just purchased the same jack. Follow the setup instructions and it's a hella good jack for $97

[@rototiller78]

Yep, I got the Pittsburgh Pro 3 Ton low profile for around $90 last year and it works great.

[@az-chris1136]

You should have gotten the Daytona 3-ton, low-profile & extended reach for $25 more. It has the foot pump to quickly set the saddle on the frame rail, plus it gives you an added 4-inches of lift.

[@ronsteitz4535]

This might be good for my Vette. Weight lift for me is not as important as long reach and low clearance.🤔

[@gsxr419]

Just bought it my lowered car was the deciding factor. It's a huge jack though, and heavy.

[@bsmithshoes9120]

We will ignore you told us about the wood thing.... but we’re all still gonna do it anyway🤣

[@JustinDowDIYcentralhighway]

lmao!!!!

[@OUSWKR]

Reminds me when I was young and dumb. Worked at a tire store that had the singe post in ground Rotary lifts. In order do lift a full size dodge van without the center post hitting the drive shaft we would use a 4x4 about 6 inches long on each side of the rear. Looking back lifting those without proper truck adapters was really dumb. I thank the Good Lord that He watched over me!

[@lucifchristo]

When you're in a tight spot I've come to find that it's actually safer to have a few pieces of wood that are large enough to put underneath the jack rather than on the jack itself. This is definitely far more stable but can still be a bit hairy

[@FOZ23]

I always thought that the wood was to prevent wearing. So it wouldn't be metal on metal.

[@ninjatechauto655]

If I had to make the choice. I would have went for the 3 ton long reach low profile. Though the lowest height is marginal but sometimes just a half inch can make a difference. What I do like is the higher 24inches. Works real well with the 6 ton Jack stands. And when I am working on the ground under a vehicle. It is nice to have that extra room without having to raise it in multiple stages to get the height I need. That is my own opinion. You may not need that aspect of it. I do.

[@byroneckhart9070]

I think this is an excellent choice and will fit a wide range as you have shown. Doesn’t this come with grease zerk too! Anyway. Good choice, good demo! I went with the 3 ton Pittsburgh Automotive lightweight 67 lbs vs 100 lbs Daytona 4 ton as I am twice as old as you and only work on my stuff. Not like I am going to be pushing the jack all over the place but if I need to load it up to take with me, every pound saved helps us senior citizens! Thanks for sharing!

[@mikenguyentxable]

After spending several weeks reviewing the Pros and Cons on the Daytona 3-Ton Low Profile/Long Reach Jack and Daytona 4-Ton Jack and watching your video. I just picked up a Daytona 4-Ton jack in Blue for $199 at Harbor Freight. ($239 - $40 coupon). I like the fact that the Daytona 4-Ton also has ZERK fittings for the front wheels just like the 3-Ton Super Duty. Will be using this for my current Toyota Tundra and soon to be Ford F250 Turbo Diesel!!

[@coytus94]

If you are going to be lifting heavier duty trucks with it I'd get the 4 ton. For most people however, the 3 ton low profile long reach is the best option. Has the foot pedal for when you don't want to pump it by hand 24/7 and can reach good jacking points easier than the regular one, especially if your pinch welds are rotted away and you can't use them.

[@frankrizzo367]

Love the enthusiasm! Great review man!!

[@7.3life]

Thanks Dow I'm gonna have to pick me up one, glad I waited now.

[@Hallowsaw]

Its crazy, these jacks are 20% higher price in 2024

[@izzyso3820]

I got the 3 ton super duty. It will outlast all the other ones there.

[@adamjackson4525]

Thanks for the videos. I was leaning towards the low profile long reach one until I saw this. For the time being I'm using the Pittsburgh low profile heavy duty. Works well. 2 and 7/8th to about 19 inches. Only paid 79 dollars with coupon last year

[@JustinDowDIYcentralhighway]

Nice!

[@iamstackhouse9750]

“How about that “ with the mechanic pose right after 🕺🏽 😂 awesome video 🤟🏾

[@sharpie132]

Best one is the long reach jack that was 199 in the vid with the footpedal. Has a long reach and max height of 24 inches. Harbor freight had it on sale for 179.99 plus there was a 20$ off coupon .

[@kiditsmaug]

Great review! I've been debating which one to get for a few weeks now. I recommend checking the hydraulic fluid level and then bleeding the hydraulics to get the air out of the system. You'll most likely get a more lift travel with each pump. Air is compressible and no good for hydro systems.

[@vkweir]

Good to know. I love it here Sometimes

[@scubbarookie]

Good topic and video. I'm considering the 3ton lowest profile with the long reach, and foot pump feature. These never go on sale, however... I am also now considering the one you got! 4 tons is no joke! Thank you Justin! 👍

[@WorksIRL]

I really like my yellow Daytona 3-ton super-duty professional floor jack the past couple years and like seeing your comparison of them. Thanks for the video and exhibition!

[@abrahamestrada2206]

my dad is thinking of buying the orange one. how has it treated you so far?

[@WorksIRL]

@@abrahamestrada2206 I’ve had the yellow 3-ton for over 3 years and it’s featured in a number of my videos on my channel and it’s been a 💯 solid performer!

[@abrahamestrada2206]

@@WorksIRL that's great to hear!

[@boomstickkid]

i will be buying the long reach soon, i have the older pittsburgh 2 ton long reach been a great jack, 4 inches is 4 inches i have lifted junk and i need all the height i can get.

[@miguelmendez4718]

Great video, I have the long reach low profile and is great when you have to support rear differential, engine and trannny when changing motor mounts and need that extra reach under the vehicle, instead of crawling underneath the truck to find the jack.

[@melgross]

Have you examined these to see if you can find a quality difference in design, thickness of sheet, wheels, etc.? Or is there just a slight size difference and capacity? Great demo!

[@jorger643]

I definitely want one in that green pretty ...like sublime green 👍

[@Mach141]

The 4 ton is now the same price as the 3 ton low profile long reach, making the 3 ton low profile long reach the obvious choice. Or better yet, save $60 and just get the 3 ton low profile. While the long reach might seem insignificant, it does allow the jack to go higher, which is important for many. No more using wood blocks to get that extra height. And check out the Pittsburgh branded jacks, which are practically identical to these new multi colored daytonas for less coin

[@gunsaccessories8853]

Great video! Thank you. Definitely helping me make the right decision.

[@batnav10]

The only reason I think I would go with the Super Duty over the rest is it has a 3 year warranty. I think the rest are only one year.

[@ClintsTractor]

Actually it's 90 days. Most everything there is 90 days. Except for most hand tools which are lifetime. And of course the yellow super duty Daytona which is three.

[@fike301]

Yep my super duty has 3yr ... Impressed

[@ramirocruz3414]

“U know what ignore what I even told u about the wood thing” I love this shit !!! Getting making videos Justin !!!!

[@ramirocruz3414]

Keep*

[@teamgreen02]

We already know about the wood thing. Just don't crawl underneath anything unless you have at least two methods of support.

[@tenzackyogi1742]

There's a recall on jack stand of harbor frieght. And I would like to say dont forget to put hydrolic fluid in floor jack.

[@jarmelbarnett6922]

I would have liked to have seen the tire flat (deflated) to see if the low profile jack was low enough.

[@MattSadis]

Great topic, I do need to purchase a floor jack soon. I had been wanting a green one to match my green tool cart but the Daytona green looks different/brighter than the US General green. I need to re-think my life now.

[@aaronhicks8094]

The black may not clash too much with the green

[@malcolmnicholls2893]

Dough. Another massive setback. (know what you mean)

[@georgebarnes4410]

They’re close enough in most light you’ll never notice

[@robinkuruda5249]

Thats funny right there what you said🤣🤣🤣🤣🤣🤣👍👍

[@ohyikes1]

But will the GREEN jack clash with your shoes?

[@nelsonfernandez7473]

I ended getting the long reach for 199 could not use coupons, looks like a good jack, but you need a jack to lift this jack up, real heavy

[@Samlol23_drrich]

I just wrestled with one today. Got it into my car but it wasn't easy with a rolling shopping cart

[@laserfalcon]

Just bought the yellow daytona, so far impressed

[@laserfalcon]

@Jeff Perters I think i used discounts and got for $179

[@greggmuse5597]

Hey Justin, my names Gregg. Just finished watching your video on you deciding to purchase your Harbor Freight 4ton extrem green Daytona floor jack. You ask the question, if we thought you chose the right floor jack. Really just a couple of 3 things that you need to consider when making that decision. #1: Cost How much can you afford to spend on a floor jack? #2: What is your intended use for this new floor jack? Are you going to be working on just your 2 car & that's all? Or are you doing side jobs @ night & on weekends? Or are you taking it to a full blown garage. Also what type vehicles are you going to be lifting (low ground clearance vehicles, pickup truck, 4x4's)? #3: Last but not least, warranty. I could be mistaken but I believe 1yr is the longest warranty any of the Daytona floor jacks have except for the YELLOW Daytona Supper Duty 3ton floor jack which has a 3yr warranty. That's the same jack that Snap-on tried taking them to court on copyright infringement. Snap-on didn't win. Thank you for your channel. Gregg Muse

[@lambofest88]

What's a good jack for a beginner, doing oil changes and brakes? (2012 Vw New Beetle 2.5) Thanks

[@itsheff3929]

Why is this so funny. Lol I subscribed and haven’t even clicked on your page lol

[@V8SKULLS]

Nice video brother, you should have gotten the one with the foot pump, makes it easier to start and way faster too, but it's still a badass floor Jack, you take care and its Beer friday.....!

[@Elway358]

Nice jack! I picked up the low profile 3 ton model with the 20" lift a little bit ago and freakin love the thing. I used to have to do the 2X4 on my trolley jack like you talked about to get my big ol Durango off the ground. The Daytona lifts it higher than I even need to go with ease. I don't know why anybody would be disappointed with these jacks.

[@410AutoTech]

Awesome job justin you wont be dissatisfied!! I went with the 3 ton green low profile 👍

[@emanuelhdeza13]

Just bought one used 3 ton green low profile for 100 and I geeked love it

[@crazynazer6895]

I just picked up the 3 ton super duty, I saw they manufacture it in the same facility as the snap on one

[@Joe_Blo]

I bought my current jack almost 40 years ago before there were Harbor Freight stores, from a store that sold imported tools. It's a Chinese heavy duty jack, & just needs new seals. It's done everything ive asked of it over the years. But the identification label is long gone, and finding the right seal kit near impossible. I paid $55, which, adjusted for inflation is around $150. So the 3 ton on sale looks like the best fit for my needs. Nothing I own weighs 8000 lbs. Because they're low profile, a wood block can be usually be added, giving the jack extra lift distance.

[@vkweir]

Great video. Thanks 😊

[@ThomasNappo]

Good job..Daytona the best looking jack..looks solid

[@ronniesealy7931]

Logic sounds good to me. Good info, thanks for the video!!! 👍🏻🇺🇸

[@NoneMechanic101]

This video helped me out. Going to get me a Jack.

[@paulchen117]

Just bought a 4-ton after watching this video and the other one on Daytona floor jack. I think the 4-ton is a better value as you said it. I got 6 lbs truck and 6 lbs travel trailer. The 4-ton works better. The 3-ton is too light for me.

[@toolsmetals2148]

I bought that low profile jack a few months ago and it for surely has some weight to it

[@chemicalspore]

I just bought a 1.5 ton pittsburgh, I hope it holds up better than the jack stands lol

[@TheShanesousley]

For a corner. 3 and 4 ton jacks should breeze through most things. The yellow jack is superior because its hydraulic systems are much better. Meaning it will hold your shit up for a week with no drop. These other jacks wont do that.

[@aaronporter2180]

I think it has a proper warranty as well not just the Hf 90 days

[@CristianSanchez-vl8oc]

Really enjoy your videos man!

[@JustinDowDIYcentralhighway]

I appreciate that! Cheers!

[@ToddEStewart]

“You know what, ignore I told you about the wood thing.” 😆

[@JustinDowDIYcentralhighway]

Todd Stewart 😂😂😂🍻👍

[@happysawfish]

There's a saying in the legal profession when the jury hears something and the judge tells them to ignore it: you can't unring that bell

[@tuffguy11505]

🙌🏼 😂

[@thelthrythquezada8397]

Damn!!! I was just about to comment on the 5 years ago prices to 2024 prices... But the person under me already did!

[@tommartin3016]

Just bought mine. It works great

[@bodydroppedon20]

Thanks for the video i bought the same one after watching the comparison

[@justforkiks29]

How come you didn't compare it to the 3 ton professional jack that harbor freight compared to snap on jack?

[@AequitasSaints]

The lack of grease fittings was a deal breaker. Had to go the model up

[@georgebarnes4410]

The 4 ton does have grease fittings.

[@PoringPoring951]

I like this guy humor.

[@TATEXPRESSINC]

I love the video

[@fike301]

Just got a super duty 3ton ... Came with 3yr warranty

[@georgebarnes4410]

I have the exact same Jack. Wish it had a little bigger wheels as it gets caught up on everything and won’t roll. Love mine

[@Saladon89]

I got the Standard low profile 3ton, and its very loud rolling it around in my quiet neighborhood

[@EPHONIC]

On that Jetta, where do you place Jack stands?

[@JustinDowDIYcentralhighway]

Pintch welds that run along the seem of the body. sometimes you might see a hard plastic piece under Neath. That's a good spot too

[@EPHONIC]

@@JustinDowDIYcentralhighway Thanks. I usually set the Jack at the welds but maybe I’ll start jacking from a different spot so the stands can go where the pinch welds are. Thanks for a great video with energy and isn’t boring like many others.

[@waskito3443]

I bought one recently and can say I noticed the low profile one is worse imo as it only goes about an inch lower where i cannot fathom a situation where the regular 3 ton daytona wouldn't fit but secondly the low profile one pumps up about 30-40% slower and for anyone who regularly works under a car you know this is the biggest factor in buying these lifts.

[@jimfeaster4837]

I like the jack

[@LilyoftheValeyrising]

My Craftsman 2T floor jack I got back in ‘96 finally broke. I had to get a new one so I got the green NASCAR 3T jack. I hope it’s good. The Craftsman one was great for my Ford Taurus back when I bought it but not high enough for my 2 classic Mercedes or the Nissan Frontier. I’m hoping the green one will lift high enough.

[@rodw]

Which one would you recommend for a DIYer doing routine maintenance like rotating the tires and oil changes? I am still bummed you're not a neighbor😍😀 Thanks Justin once again for sharing your thoughts and videos, Rodney

[@JustinDowDIYcentralhighway]

Rodney Widger I’d recommend the same one in this video. It’s overall perfect for most anything you’ll run into car, SUV, or Truck 👍

[@toddrhine7648]

Thought you purchased the Black one? What about going from the front of the car?

[@danmckevittstoolsbagels3258]

I've wanted that one for a while

[@gerardovela8672]

The 3 ton low profile long reach has a foot pedal and the Daytona 3 ton yellow jack has a 3yr warranty that comes with it.

[@doublesynchrohelix8613]

I recommend putting Harbor Freight Coupons App on your phone, it's 3rd party, NOT the official HF APP.. every coupon in US updated constantly, "add to cart" all the coupons you want including your free item, they scan your phone, never cut a coupon again! (I'm not affiliated lol)

[@petea741]

I can’t find that app but thanks for the advice

[@codynickel9650]

How the hell did you get your mic to sound so good outside

[@Griff33]

I could be wrong but don’t you have to bleed the hydraulics when you buy one of those. Just a thought. Thanks for making the video.

[@JustinDowDIYcentralhighway]

milkcrate919 I heard no with the new ones

[@pepehernandez1232]

Nice jack i wanted one off those

[@brian_youtube]

I wonder if these jacks require a bleed before use? Years ago I got the Craftsman aluminum low profile jack and many people complained it failed soon after out of box. It seemed that a bleed upon arrival was basically a requirement or the seals went out. It seems that most new jacks do not seem to require this.

[@prairiefarmer5994]

Bought mine a couple years ago and never bled it. Never had any issues.

[@brian_youtube]

@@prairiefarmer5994 I forgot to mention that, I did not bleed it either. After about 3 years I did due to what I heard, but no issues. Mine goes back almost 15 years, so there is good chance we have different jacks.

[@MyGuyKirby]

What do you do when you jack at the pinch weld? Use a special slotted pad?

[@JustinDowDIYcentralhighway]

Nope. Pinch weld should hold up and it's under the car where you'll never see it so if it gets a little scratched or dented oh well. nature of the game. Not going to see it anyway. Cheers!

[@OUSWKR]

If it’s designed to be the lift point for the vehicle then the pinch weld will usually hold it. Now if the pinch weld is completely rotted out (Chevy Venture & Nissan Sentra) come to mind you have bigger issues like your car folding in half if you get hit hard.

[@DogGuy19]

Good video thanks

[@JustinDowDIYcentralhighway]

Glad you enjoyed it. Cheers!

[@LHRtoJFKconcorde]

Like the enthousiasm and recognize the efforts. Question: Why not buy the "Racing" [aluminum] version? 3ton seems to be close to the same $ as the 4T steel version and 40 pounds lighter. I would think anyone with anything less than a 1ton could go with the 3 or 2.5 easily.

[@gabrielsalazar6648]

Thank u just got mine today

[@Tubeytime]

Great video thanks

[@EnriqueReyesJrREALTOR]

I have a quick jack that I bought from Harbor Freight with the quick pedal in the back. It does meet the frame quicker, however because of the lift rate, it is hard to jack up if you are lifting a heavier vehicle. I don’t see that jack offered anything from Harbor Freight. For smaller cars it’s great, not so much for full size cars, or trucks. The jack that you’re showing looks to be better than the one that I purchased, for heavier vehicles.

[@pullingguard5435]

Thanks bro

[@mdbem-zk1fk]

I purchased 3 ton low profile. 9 months later after very little use it stopped working.

[@thomasgeraghty5374]

Thx for doing this review. Iam looking for a jack. On the used Jack's, what can one look for to check if it's ok. Any recommendations on jack stands

[@JustinDowDIYcentralhighway]

Nothing wrong with the Pittsburgh's I've got a pair here at the house & I have a pair of Durlast under a Honda Civic which has been under it for almost 2 years it feels like. lol

[@thomasgeraghty5374]

I picked up a nice set at the good ole harbor freight 6 ton....with coupon...40 dollars. Great comfort while working on the van.

[@LNRRidez]

How about them recalls on the the Pittsburgh jacks? I'm not convinced they fail, I think its mainly operator error. Either way I bought a pair of jack stands from Napa for $26

[@darkshadow2393]

Did you add hydraulic fluid? if not, the reservoir is probably mostly empty making the rapid pumping not as effective as it should be. It was clear that your pumping action range was very limited.

[@KayKashi]

Wha jack stands do you use?

[@robertmckee8453]

What value could we place on the super-duty? I’m shopping now, and wondering if super duty might translate to better quality (less chance of it breaking down)? Or do floor jacks tend to be trouble free anyway, so super duty would be meaningless outside of a busy shop? One of the things I hate about my old jack is when you try to lower it down onto the jackstands, it always comes crashing down (there is no slow).

[@youarerightboss]

Scandel~ the Warrior playing in the background.

[@stevmarc5425]

Shootin down the halls of harborfreight- bang bang I'll buy Day-ton-a

[@willclemons7664]

Justin Aren't you suppose to purge these before first use. Also doesn't the yellow one have a longer warranty. The reason they're a tad more expensive?

[@Twilliams60142]

I'm trying to find a jack that's efficient for me also. I have an 02 Trailblazer which I'm going to do a brake job on in the springtime. Years ago I had a jack where if you pump it up one time and it shot up until it hits something solid than jack it up as usual. I think it was called daytona racing jack. I found it at Sam's club. I would love to find something like the ease of that one.

[@chriscorum7266]

Not rapid pump rapid pump goes all the way up in three or four pumps

[@BurningSteel69]

did that come w/ fluid already in it?

[@TonyHarper-j7f]

PLEASE TELL US how they hold up over time?

[@robertstonebreaker8394]

3 ton vs 4 ton I’ll take the extra 2000 lbs never know when you are gonna need it !

[@lane4574]

This vid on u tube has the yellow one , He owns a auto shop and after one year of use , looked like it had been beat with a chain for a month straight. He says it gets used all day everyday , any way he proceeds to roll it outside and has a flat bed wrecker parked , he says it weighed 12,000 lbs , He jacks it up and then goes to lunch , comes back after an hour and it didn't budge...That's what I based my decision on , I purchased the same DJ3000 yellow Daytona.....And I love it.

[@SOLDOZER]

@@lane4574 Can you say that again, but in English?

[@lane4574]

@@SOLDOZER Should someone read it for you.....If you cant figure out that a person who owns the yellow daytona , who also owns a auto shop. posted a vid about the yellow daytona DJ3000...Sound like you're an angry person , might wanna listen to barry manilow instead of James Hetfield's , Lars and Kirks angry lyrics.....Your probably Dave Mustaine , Pissed off that you quit and went to Megadeath...

[@MrTubeyou323]

@@lane4574 that one is a 3 ton right?

[@MrTubeyou323]

@@lane4574 😆😆

[@miguelledezma1379]

Justin quick question bruh.? Daytonas worth the premium price? Compared idk lets say a 70 dllr husky or craftsman etc. I really need a new jack since my last got stolen lol.

[@TheShanesousley]

Someone did a review on a lot of different jacks. Left it under load for a week. The only jacks that didnt move were the yellow and the snapon that HF got sued for.