What Is The Worst Year Duramax Ever Made? EXPLAINED!

key tags, decals and shirts!👍 truckmasterdiesel.com coupon code: TRUCKMASTER10 for 10% OFF everything and free shipping
Subscribe to my new KZbin channel: / @truckmastergarage9944
sptoolsusa.com use discount code truckmaster and save 10% Everything!
Instagram: @truck_master07
My Instagram @truck_master07
pCGDa8KdhM...
Tire Streets Tires Link / use 15% Off coupon code truckmaster 👇
tirestreets.com/products/arms...
hspdiesel.com
Coupon code: “truckmaster”
Anthem Wheels! www.anthemwheels.com/?ambassa...
Ryan’s Diesel Service ryansdieselservice.com 5%off turbo’s coupon code👉 truckmaster
Kodiak Truck North Prairie, WI 👉 kodiaktruck.com transmission, tcase and rearend coupon code truckmaster save 5%
Instagram @truck_master07
Mods done to the Truck!
EFI Live DSP5 Switch
HSP Air Intake Kit
68mm Street Turbo Ryan’s Diesel Service
60% Injectors Bitterroot Diesel
HSP Diesel YBridge
HSP Hot Side intercooler pipe
FASS Titanium 150GPH Lift Pump
FASS Fuel Sump Kit
MBRP 3inch Turbo Down pipe
PPE Race fuel valve
Ported fuel fitting
Transgo Jr Shift Kit
Kodiak Truck Transfer Case
Kodiak Truck AAM GOV Lock11.5 Rear end
PVC Reroute
PPE Stage 5 Built Transmission
Zone off-road upper control arms
PPE Stage 3 HD Tie Rods
6" Pro-comp suspension lift kit
5100 Bilstien Shocks
35/12.50/R22 DX12 Delinte
22x14 Instigators A776 Anthem Wheels
Trail Ready Front Bumper
Music by: suncloud
Boostautoparts 👉 boostautoparts.com/products/f...
#duramax #powerstroke #cummins

[@TruckMaster]

What are your thoughts??? I know this video is going to make a lot of people mad I’M SORRY! Nothing but love everyone

[@roderickdixon2428]

I have a lml with the cp3 conversion and a lift pump. I think everyone agrees with what you’re saying keep up the good work man

[@TruckMaster]

@@roderickdixon2428 thanks!

[@missionaccomplished3756]

I own an lb7 and i’d say the 5 speed is definitely a weak point. not having 6th gear makes a difference for mpg as well as it produces a lot more wear on the engine

[@duramaxdave1062]

@@roderickdixon2428 I also have a lml with a cp3 conversion and lift pump. I had a 2007.5 classic LBZ and the LML has a lot more power. I do wish I had been able to keep the LBZ

[@HippRacing]

I have an lmm with just about 400k miles here in Michigan, lol I need that passenger manifold bad haha just had one of the 12 point bolts snap in the manifold looking into the said woosh noise coming from a leaky manifold/up pipe flange.

[@ajarjil5118]

I’ve got a 2005 LLY and it’s been FANTASTIC! I’ve got 479,000 and it’s still going strong. Last year I replaced all the seals front to back, the front end and put in a larger transmission cooler and new radiator. People said I was crazy for dumping that much money into it, but it’s been a great truck for 17 years and I knew I then and know now I have many years of use left. I religiously change the oil when needed. I was very surprised to hear that my year truck fell into your “problem child” category. Love the channel and learning new stuff all the time. Keep it up!

[@onlyychevys]

I've had my LLY for 8 years and its been the best most dependable truck I have ever owned! 258k and I've only had to replace a leaking water pump.

[@tylerhurst1437]

My LLY has never let me down only water pumps o rings and AC compressor

[@genebrown7161]

I bought a new LBZ in May of 2006. 260,000 miles later it’s still going strong. Always has been bone stock. I use Lucus oil and fuel treatments. Engine belt pulleys, 4 giowplugs and new o-rings in the fuel filter base is the only repairs ever made on the engine. Best truck I could ever own.

[@andrewlawrence1169]

I just bought an '06 with 198k miles on it. Hope it works out well for me just as it has for you.

[@patdoka5716]

Same here Bought a 3500 GMC Serria In March of ‘06. 1 glow plug Water pump Brake booster and master cylinder Most troubling thing is fuel filter getting air. 164 k. I love this truck. Interior is falling apart. Too much plastic!!!!!

[@Bigiron429]

@@andrewlawrence1169I have 270k on a 5.3 Silverado, that mileage is NOT impressive lmao

[@jair8808]

@@Bigiron429okay

[@picklerick_404]

how much did you pay for it

[@Wheaty09]

The LB7 is a diehard beast. My 01 has about 270k on it right now. After upgrading to the stock SAC style injectors no more problems so far. They are supposed to help fix the injector issues. That pickup just does what I ask it to do no matter how hard or easy it might be. Its never left me walking. Thinking about updating to an LMM this winter but who knows the LB7 still purrs.

[@davidbradshaw818]

Got a 01 3500 4x4 that has 50 percent of the mileage pulling 20,000 lbs plus. 340,000 miles with no engine problems.

[@dangermouse3314]

Good discussion, getting the issues out in the open and learning fixes and what to look for is important. So many turn key and go, not ever knowing what really is happening with there truck. Thanks for posting it Josh

[@TruckMaster]

I appreciate it

[@JonahHorner]

My dad has a 2011 lml, it’s over 300k miles with the stock cp4 pump

[@tzadonaihebezebel8604]

I had an LB7 2004.5. Replaced injectors, ARP Studs, valve cover, & manifold hardware. Beats using the torch a second time. Loved this truck!!! Sad that I sold it a few months ago. Need another LB7 for sure. Love the classic cat eyes look.

[@michealortiz3350]

04.5 is a lly.

[@PWarmuskerken]

I ran my LLY with no major issues for 290k miles with a Diablosport tune 95% of that time. I ran the original injectors the whole time until Feb last year. It was a solid, reliable truck. When the engine needed more than "just" injectors, I had a built LLY engine and built Allison (6-sp conversion too) installed to solve all the issues you mentioned here.

[@nickhedges3049]

These are the comments we need lol

[@NorCalFarmboy]

True LLY’s the emissions restricted and the cooling stack was smaller. However trans cooler and do the very basic deletes and intakes like we do on all of them and the LLY decimates all over. Each one will have their issues. My old 04.5 LLY was solid and never had an issue the whole time I owned it.

[@jerrypeal653]

Still have my 05 no issues.

[@tylercooper40]

I really like your LMM build you have going. I’m in the process of rebuilding my LMM also , got carried away with timing and torched a hole threw piston number 6 haha . Those valve covers look awesome. So I was going to wire wheel and clean the factory valve covers to save some cost but they look so good. Maybe we could compare trucks some day. Nice work

[@craigrawlette4199]

I have a all stock 02 LB7. I did have to change the injectors at 170,000 miles. But other than that, I've done nothing other than preventive maintenance. New belts, radiator flush, transmission flush with new filters, and rear. I now have 220,000 miles. And I can honestly say that I will never get rid of this truck.

[@JohnSmith-pf7xx]

I have a /mostly/ stock 02 LB7. Thanks for the heads-up on the injectors. I bought mine with 130k, and have my fingers crossed the FASS that came with it can make em last a little longer

[@edmontgomery6195]

Gm was replacing the injectors at no cost if they failed before 200000miles The replaced my at130000 on my 03.

[@lukesandstedt8461]

Got a 02 LB7 with injectors replaced at 200k and lift pump installed around 350k and still driving like a champ at 407k (knock on wood)

[@chrisn5079]

​@edmontgomery6195 is that something new? I had an 03 duramax. Needed new injectors, was over 4k out of pocket (I no longer own that truck, had over 300k miles and the body rusted out)

[@sherrieweaver2975]

Great video Josh. I own a lly and love it. I’ve had it for about 7 years. When I was looking for a diesel I knew about the lb7 injector problem so I got the lly. I didn’t know about the head gasket issue. Of course I had to replace them. I’m now starting to do some small upgrades after learning more about them from your videos. Thanks so much and keep making the videos.

[@andrewsoja]

How much was it for you to replace the head gaskets on your LLY?

[@sherrieweaver2975]

@@andrewsoja 4K

[@cmcd082]

I've had my lb7 for two years now, was a one old man owner truck from Canada. First thing I did was subscribe to your channel and add a lift pump. Had wanted a Duramax for years and it was finally in my price range. Thanks for all the great content.

[@robertg086]

I bought my 03 5 years ago and had to do injectors 3 years ago. But after I added a Kennedy lift pump and a cat fuel filter mod the damn thing is amazing now. It's my first diesel also. Fuel filter upgrade is gonna be huge with the lb7

[@cmcd082]

@@robertg086 I got rid of the engine bay fuel filter after adding the airdog 165. Figured there's no reason for 3 filters and the added cost on maintenance.

[@robertm5608]

@@cmcd082 lol..... the more filters the better dude! those filters is whats gonna save your fuel injectors/cp3. your talking bout cutting out 10 microns ish of filtration if you use oem ac delco. i'd gladly pay extra few bucks here and there if it meant i wasn't gonna have to do injectors/cp3 eventually due to poor filtration. gonna pull the injectors n see nothing but rust!

[@OldGriz708]

There are no "worst" Duramax to own. It starts with good, better, best, bester, besterist, etc......

[@TruckMaster]

That’s a good way to put it 👍

[@justinmartin8887]

Eh. I don’t work on pickups much but duramaxs where always troublesome and anemic on the medium duty trucks

[@czwarlord9243]

Completely disagree. There are years that have some big issues. LML for instance. Junk injection pump, trans cooler/radiator undersized, pitman/idler/ball joints are junk, then jump into the emissions…. Etc etc. basically you have to sink $10k into a truck to make it “reliable”. To call it even “good” is ridiculous

[@OldGriz708]

@@czwarlord9243 Obviously your a dodge boi

[@czwarlord9243]

@@OldGriz708 not at all. I’ve owned diesels from all three to include that garbage lml. I have first hand experience on the lml on the gm side as well as the LLY.

[@southernsilverado5349]

My 2006 Crew Cab ZF6 has the LLY engine code but like you said it’s simply a detuned LBZ. A couple upgrades with some tuning and now she runs extremely well. Good content bud keep it up!

[@kevinfinkral1985]

I started with a 05 LLY with 177k on the dash. It was taken care of it’s whole life. I currently have a 12 LML and plan to do a air dog lift pump. It sits in the garage most of the time unless I have to pull my camper or a heavy load. Haven’t had a issue with either. I plan to do some work under the hood to allow it to breathe a little better in time. Your videos are very helpful on gaining knowledge and save us viewers money with your install videos. Thanks!

[@koltenpetersen4037]

That's why I love my LLY so much. Its hated so much for being a duramax. Yet just the mouthpiece will save you. When I bought it and bought it home it over heated but with the HSP mouthpiece saved that and now I haven't seen the temp over 200 on a hard pull. My LLY has been a very solid truck and very reliable with 263k on the clock.

[@605LIFE]

100% agree! LLY is way underrated and way better VALUE than LBZ big picture!

[@javadose317]

Hsp mouth piece? S&b?

[@cdsmit27]

​@@605LIFEcouldn't agree more. I bought my lly in 2019 with 72k bone stock. Paid 13k for it I'm 2nd owner. I did the S&B mouthpiece and full WCfab intake and pipe kit. Did the 165 fass lift pump and egr delete. Things runs like a scalded cat. My buddy on the other hand bought a lbz in 2020 with 110k on it. Paid 30k for it. The entire undercarriage is rusted to shit. He had to put 10k into it since he owned it and has nothing but problems with it. I wouldn't trade my lly for his lbz in a million years and I have an extra 25k in my pocket.

[@californiacctoilets7280]

@@cdsmit27lly is way better than lbz

[@frostymax_6.63]

It’s crazy, I’ve bought both of those generations. My first duramax was an lly, owned it for a couple years, ABSOLUTELY loved that truck, sold it at a little over 260k miles, no complaints at all other than normal wear and tear on some parts. And now I own a 16’ lml, which I was well aware of the cp4 issue. Just sits in the garage now till I can buy the cp3 conversion kit from fleece

[@juliosanchezsr3608]

Why do you have it sitting in the garage? Did it break down? Or just being preventive until you can swap it?

[@brandonnice2138]

I bought my first diesel about 2 years ago. LML. 2015 Denali. I bought that truck because of your videos. I have spoke with Ryans diesel performance because of your videos. Would love to upgrade the turbo to a 64MM because of how highly you speak of them, it just isn't in the budget yet. I did all the upgrades you had recommended. Did the full deluxe Y bridge from HSP, (orange for GM) fleece cp3k conversion, lift pump (air-dog 2 165 gph) pcv reroute, up and downpipes. Got a 4" exhaust because that's all i could get and what i think is a decent efilive tune, minimal smoke. I use the CTS3 monitor because of all your recommendations and honesty and being a military man. Currently want to pull the trigger on the kryptonite deluxe front end and ball joints because of you. I watch all your videos (every one), i respect you as a fellow american, a soldier, an honest mechanic and we have never met, but i trust you more then most human beings on this round twisting rock. Appreciate all you do, have sacrificed and all your wisdom and knowledge. Thanks for inspiring me on diesels and educating me. Just wish i had a little more money to get my truck exactly where i want it. 64mm RDP turbo, kryptonite front end and ball joints and HSP torsion bars and my truck will be everything i have ever wanted and you are the reason why. Those companies should endorse you for marketing. Thanks Truckmaster, and best wishes to you and your family.

[@llymax248]

I bought my LLY with 134,000 and it had the S&B mouth piece on it already. I tow a 10,000 lb fifth wheel camper. After my last 1500 mile trip it start pushing coolant out the overflow. It now has 143,000 miles. I replaced the head gaskets using ARP head studs, Mahle gaskets and a new pair of HSP exhaust manifolds. I’ve never really had overheating problems to date. I also have edge tuner with EGT probe, air dog lift pump and Air Lift remote control air bags in rear. I love the truck- it’s still in close to brand new condition and I’m hoping for many good summers of camper pulling! I did install an 07 power steering pump with reman steering gearbox, fluid filter and cooler in the system as well, this made a huge improvement with brakes and steering, it’s really better than new now!

[@micmac6040]

I bought a 2005 GMC 3500 new in March of 2005. It has been my daily driver since day 1. I straight piped the exhaust and put a good air intake on it early on. 289,500 miles later it is time for a new transmission. The engine has had 1 issue ever, common for the year an injector wire wore through and was replaced and rerouted. The A/C has never been cold enough from day 1. The transmission often does not want to work in reverse on initial startup from day 1. Put trans in Drive and then Reverse and it always works.

[@Ka_Gg]

I bought a really cheap LLY Duramax at the beginning of last year. I kind of assumed that the head gasket was leaking which it was. I think with knockoff brand head studs and all the gaskets stuff it was around 1000 or 1500 for all the gaskets and everything. Sad thing is I noticed one of the Pistons didn't protruded high as the others...

[@chrislong8134]

I agree with you completely on the LML. I do own one, and I know it's on borrowed time. I also think that even with the amount of labor involved, CP3 conversion, Y bridge and LB7 up pipes, S&B intake, delete and EFI live. I think you can get a good dependable camper puller and solid daily driver. My biggest killer is the salt in Michigan eating my body

[@daveharrell6782]

Just broke into the diesel world in July of 2020 with an 02 LB7 with 290k on it. I've spent a ton of money on it because the poor thing was pretty much neglected mechanically. It's all stock minus a 4 in exhaust and I absolutely love it. Still needs a few things but I still love it. I just upgraded this week to an 06 LBZ with 128k on it. Bone stock, nothing done to it. I really like this truck but my heart is still loyal to my LB7 right now. Love the video thanks for posting. Any suggestions on which upgrades to do first would be awesome. Money is tight so budget friendly upgrades preferred

[@dandifusco1868]

God man I LOVE your vids! You, at least to me, seem like the ONLY guy who tells me everything i need to know. Not just bits and pieces. Peace brother!

[@TruckMaster]

👍👍

[@chachifeere]

My brother bought lly 5-6 years ago knowing it needs head gaskets. So he got a deal. Fixed the gaskets and did a small tube and it’s been solid ever since. You should do a video what’s the best gen to buy on a budget

[@Veikra]

i did lbz mouthpiece, removed insulation in fender near the intake. Never had overheating again. I do clean radiator stack every week and 40C celcius towing uphill, never goes over half the temp gauge

[@lowpro47]

Hello, I like your channel it's interesting and informative. I have an 05 Chevy LLY with 118,000 miles. I have owned it for 3 year. .It had a Banks Tuner, air intake ,and a banks exhaust system it. I loved running it on the higher setting ,it performed great. I did experience a hard upper radiator hose after a while and then a coolant usage issue. After viewing your channel I realized I was in trouble. A local repair shop in our town checked it out and offered to repair it. I did purchase a ARP stud kit to go also with the head gasket repair job. The Banks system was replaced with another to accommodate some other changes that I won't mention. It was a $5500.00 investment. Now it run better than ever. , My next change will a lift pump to aid the fuel system. Keep up the good work. Thanks

[@otrpatriot1980]

You forgot about the brittle pistons and "2 piece" crankshafts in the LML. I pulled the heads to do a head job and found 6 cracked pistons in my 16' with only 115k miles. I'll add that the engine has never once ran hot either but I do run it hard and tow heavy with it. Now I'm doing a full rebuild and chose to upgrade to the L5P oil cooler and the Wagler shimmed and pinned oil pump to help protect the new pistons. Also head studs to keep the heads from lifting, and a Fluidamper to help make the crank remain a 1 piece for as long as possible.

[@codyhall5370]

I own an lb7 and I love it. Just had to replace my Injectors, however that's the only major problem I've had with it in the past 20k of beating the snot out of it.

[@Alex-iy8fo]

I have an LLY because the LBZs were way too expensive in the beginning of 2020 when I bought it. It is my first Duramax and I had watched a lot of your videos before buying it, so I knew what to expect. I put the big HSP bundle kit on it and it runs great. Had 195,000 when I bought it and it's coming up on 230,000 now. I tow a 7,000lb trailer all day every day for work. I never see the transmission fluid temp higher than 165

[@bradarmstrong3952]

I posted a few tips to mitigate the LLY's bad habit of overheating in the comments above. I've love to know what you think of them as compared with what you have done

[@dwightvoeks9970]

That's what I would have done. No way I'm buying a LBZ for 30k or even 25k. That said, if you are patient you can still find rational deal on LBZ's. The problem is the greed sickness has moved to every model. I look for trucks in small farm towns. Not everyone uses them as farm trucks especially the loaded models

[@jamesscalf712]

Same mine is at 260,000 and yes the headgasket and stud kit along with injector harness but I just love the damn thing she's going to stay for the long haul great truck

[@rsbreeze]

I ran mine for 10 years and 150k miles and only replaced the water pump. I had to keep it at 60 mph towing 12k up 6% grades or it would heat up, but that wasn't a big deal.

[@bassdaze]

I've had my LLY since early 2008 and only paid $14,500 with 90k miles, that's when diesel was almost $5.00 a gallon in midwest so no one wanted a diesel... I have 235k miles on Betsy now and have only replaced the water pump... Its deleted, mild tune with LBZ mouthpiece, transfer case is shot, other than that its been the best truck I've ever owned and have no intentions of selling her, she was stolen in August but I got it back 3 days later thank God as the used market right now is ridiculous....

[@brianpite0893]

My 2009 LMM is the only one I have ever owned. I bought it new. I think it's fantastic. The only issue is glowplug failure and at 100,000 miles the EGR cooler. Which was expensive but it had to be done because I live in a emissions state. You made a honest review! Thanks

[@garymullins8781]

I have the same 09 LMM waiting on spring to replace all the glow plugs just reaching 250,000

[@tonyschaetzle6390]

Do you still have your 2009? I’m looking at a 2008, but it has 229k miles on it. Is that a good idea or no?

[@dakotafoglesongjr1425]

Between a LML and a LLY I would go with the LML. Full delete and CP3 swap it and rock on. I am planning on after the new year getting a LMM. It will be my first Duramax but I’m pretty familiar with them.

[@mvcapitolllc.7894]

LMM with EGR and DPF delete is an amazing engine trouble free since 2009 with proper maintenance. :)

[@countcuda70]

That would make you part of the LBZ club lol

[@sodbuster518able]

Good luck on trying to sell that LEGALLY with emmisions systems delete you just did,big fines for tampering with emmisions systems.

[@mvcapitolllc.7894]

@@sodbuster518able well, in my state they don’t give two shakes we don’t even have smog checks so it works for me selling won’t be an issue. I got every 40 something year old balding male asking for me to sell. They all wanna be like me. That’s the privilege of owning the diesel truck

[@mvcapitolllc.7894]

@@sodbuster518able it goes with me till I die

[@mvcapitolllc.7894]

Thank you Cuda I’m proud of my status. And if one day they tell me I can be on the road with it well I mvr got plenty of ranch land. Me and big Bertha will be quite happy burning that dirty, dirty diesel!

[@rp1645]

I like how you show the FACT the pictures of the small pieces of metal, what ever on, taken out parts. FACT pictures speak louder than words. My two baby's are Detroit's, a 8-71 & 3-53 meany meany Hours on them. They are my two play toys. The power I have in the 8-71 when I go down the road is unbelievable.

[@ashtons_always_fishing7039]

I have had my LLY FOR 2 years and put 70k on it with zero issues now she’s got 317k still runs like a top 🙌🏼

[@havencooper9389]

05 lly bought in 2013 with 33k miles. now has 127k. I tow commercial fishing net (14k lbs) here and there and only gets above 200 when going up 6% or higher grade. completely stock and only issue I've ever had was a rocker arm bolt snapped. I live in the PNW so temps don't get to extreme. regular maintenance because I love her. best rig I've ever owned

[@xaviermartinez6642]

I have a late year 2015 LML and my only worry is the CP4 pump , so I use a fuel additive every other fill up at the fuel pump. Next on the list is an Air Dog lift pump , thanks for the heads up on the Air Dog , and thank you for your service Truck Master!

[@ba337]

You should be worried. My 2016 LML left me on the side of the road. $10, 376 to repair; thankfully had a warranty.

[@lyricalprophet100]

@@ba337 - what was the problem?

[@Arjuuie]

@@ba337 how many miles was on it when it crapped out and was it the fuel pump?

[@johnpacheco8641]

Very informative and educational and I honestly figured the LLY and the LML were going to be mentioned. But Comifornia at 5.26 though 😂😂 love it God bless

[@ScottClevelandmi]

I got 186,000 miles on my LML. I asked the dealer about it fuel pump issue. They told me to keep it above a quarter tank of fuel and by quality fuel… So far so good I think I’ll check in with a local diesel shop for an aftermarket preventative repair.

[@Steven-yq9rf]

Get a fuel saver, you’re walking on thin ice. At least when the pump fails, it’ll prevent your fuel systems from getting contaminated

[@drivewaydiesels]

i picked up a lb7 last year and it was all stock. ive worked on diesels (mostly cats, cummins and internationals) for the last 14yrs so i knew what i was getting into, also helped watching alot of your vids. after about a week of having it it started to haze pretty good so i got a set of stock injectors( who the hell has $4k sitting around for a set of 30 overs or higher?) and went to work. it was a mess, someone or someones had already been in there and replaced the injectors once and did a shit job. i did this all after just having covid so i was a little slow to get things completed. after a fresh set of injectors, injector lines, the airdog 4g 165 and a ppe race fuel valve the and a delete of the stock fuel filter and housing ny fuel issues where fixed. i love my truck and honestly dont plan on ever getting rid of it. yeah some of the parts are stupid expensive but cheap in comparisson to its sibilings. also less to fail as far as emissions.

[@Scottie_B]

I have a 2016 LML. Had an injector issues. Guy told me I had a cp4 failure and quoted me 20k to fix it. Got a second opinion on a hole and a prayer a few months later and turns out the guy lied. Went ahead and put on a cp3 anyway. Did the injectors. Got the truck back and had issues for the last couple months. The same injector went bad. Pulled it out and had it tested…passed. But noticed a wiring issue. Fixed that. Mail problem still present. Loosing fuel rail pressure under load. Gave up and tore the truck apart myself and found the pump hoses ran poorly and pinched. Re ran them and bam. I’m good to go. Lesson learned. Don’t Rely on just anyone to do your work.

[@TruckMaster]

Nice 👍

[@dirtrider292]

Lb7, lly, and now I own an lbz. Out of the 3 the lbz definitely runs like it wants to go go go. Lb7 somewhat similar, for some reason my lly just felt the most timid

[@jameslozano1950]

Thank you for being up front on the issues with these trucks I have a buddy that is looking at getting a diesel

[@bryanbellar9188]

I have a 2011 lml. 261,000 miles. Recently did the head gaskets in my driveway. Put studs in while I was in there. I’ve been blessed not to have a cp4 explosion yet. My wife has an lb7 and we’ve put one set of injectors in it and a lift pump shortly after that

[@DieselsAndGuns]

I was actually gonna say either LLY or LML. They're the only two generations I've driven honestly since my step-dad has a 2005 ZF6 LLY and I have a 2012 LML. His LLY always over heated like you stated, water pump issues, and pulling with it just wasn't satisfactory at all. The LML was my first truck, bought it at 18, an the first year of owning it I spent 12k just FIXING it. My second year only about 2k, and ever since deleting it, it's been running strong as hell.

[@Billy_Ruck]

My first duramax was a lml too, still have it, I’m 2 years in and it’s getting ready to go to the shop for head gaskets and CP3 swap. Luckily it was already deleted when I bought it, EFI LIVE HARD TUNE 50 over. Had 116k on it and now it’s at 160k. Your 100# correct on it being strong as hell. I honestly don’t ever see shedding with it.

[@rickatencio3344]

@@Billy_Ruck hey brotha I just bought a lml and looking at cp3 conversion kits any recommendations

[@Billy_Ruck]

@@rickatencio3344 I’m not sure exactly what kit my guy used when he done all my work. I do know you have to be deleted to swap over. I’m sure prices have went up but back in October when all my work was done my guy said it was only an extra 2k but well worth it to get that extra security! I can reach out to my guy and find out exactly what kit he used if you’d like…

[@rickatencio3344]

That would be awesome thank you brotha

[@ZackSway6.6]

I recently bought a 2016 lml as my first diesel 😂 I did a ton of research and did the cp3 conversion 2 months later. In those 2 months I had to replace the dpf so I just finished the new exhaust system. 4inch straight pipe thanks to your vids 🙏🏻

[@outdoors3654]

I was looking at a 2013 lml, I’ve never owned a diesel so I’m nervous lol

[@joeyhughes5164]

Just bought my first duramax. 2002 gmc 2500hd. It's got some work to do on the body but I'm thoroughly impressed by the power this beauty has. Gonna be watching a lot of your videos for upgrades. What do you do as far as aftermarket alarms? Is a 2 way really necessary?

[@adamscholl9410]

Love the honesty. Unfortunately all 3 manufacturers use the CP4 pump. I bought a bunch of 6oz plastic bottles and filled them with diesel lubricant. I keep them in the back seat and pour one in at every fuel stop.

[@logan8256]

I’ve got a 318k mile lml. All stock but tuned n delete. I heavy tow, do burnouts and all, she loves it.

[@wrathmax1887]

I love my LML all the way! I know the CP4 issue is catastrophic! She's a good truck and pulls I'm getting a CP3 and Air Dog coming in very very soon! 165K MI and counting!! Great video bud!!

[@TruckMaster]

Thanks!

[@douglaswhitfield9111]

@@TruckMaster I'd like to know why airdog over fass... I have a fass now, haven't had any issues, and I use a return sump

[@brianbuvens]

@@douglaswhitfield9111 I'd like to know as well.

[@joshberlin7519]

@@douglaswhitfield9111 because he is sponsired by Air Dog. They're the same

[@spifflifkin]

I have a '16 LML. On the last road trip we took with the 5th wheel the DEL level gauge got stuck at 24%. Drove about 1200 miles before taking it to the dealer. They said everything was working properly and that the cause was either filling the DEF tank with the ignition on (I didn't) or "under rare driving situations, the sensors can go inactive even though there is fluid left. If this happens intermittently and the DEF countdown is on, it will cause the update to lock out." Cost me $80 for them to reset it. Other than that, the only failures I've had are: EGT2 failed (24K miles), DEF heater failed (41K), Lower oil pan leaked (53K) and the coolant overflow tank cracked (53K). The service manager said the most common failures are the DEF tank and the coolant reservoir. I installed an AirDog II-4G 100 gph lift pump because of your videos. Thinking about doing the CP3 swap. Even with those problems I love it. Thank you for the awesome videos and thank you for your service!

[@EdWilberg]

Gary - Same issue here.. 60k Def tank heater failed.... Air Dog Pump next Only 80k miles on mine. Any ideas on CP3 swap cost ?

[@EdWilberg]

PS: Also owned LOI yup... 2 sets injectors.... HG with bolts ..... wire harness rub caused me to spend alot on trans. Once we found it all good. towed 18k all the time ! Gave truck to my daughter now over 400k : ) with 35 And two car seats : )

[@johnnyyouse5038]

Love all the duramax’s!! My favourites are the lb7 (I own one and so do all my buddys I’m probably biased) and the lbz!

[@Alexander-fr1kk]

Love your channel brother… thank you for your service!!!

[@bryanginder5903]

Have a 02 with 300k on it! Been a great truck, bought when it was three years old. 3/4 of it's miles are pulling 12,500 and down trailers. It's on 2ed set of inj. but with mild tune, turbo and air up grades that's it!

[@jaxxbrat2634]

06 here.. Been a good truck.. Towed 24k lbs often

[@Carlos-hu3xb]

Videos are always great , looking forward for more of the lmm I’m building mine as well and your videos are always helpful n right on, appreciate your hard work my man 👍🏾

[@TruckMaster]

Thanks!

[@Thelostboy24]

LML owner here, Head Gasket failure is a big one on these as well, just done mine last week with head studs, still have the stock cp4 282,000 on the clock, nervous as hell though lol

[@Ethan_LeBlanc]

I don’t understand, my dad had a LML and we were super hard on it and it only broke because he let his buddy use it and he didn’t turn the power nob down so it blew the head gasket Edit: after finishing the video, I’d like to note it DID have aftermarket lift pump and a lot of performance mods (k&n intake, tunes, strait pipe, etc.) so i guess that’s why it lasted forever My favorite story about it is when we were doing a telephone post load with it (it was a hotshot truck and daily driver) that was about 40 thousand pounds and he looked down and was doing 90 mph with the load whilst having plenty of pedal left 😂

[@catfishtheoriginal]

Glad to know you feel the worst isn't lb7. Had one given to me and it's been sitting for 6+ years. Haven't had the chance to touch it yet but have been looking forward to getting it on the road

[@stevenmchenry9276]

I know your pain. Hopefully soon you get it.

[@Camo-Dan]

Thats awesome! Ide be so excited if I were you. I hope to have one too someday. My tundra is great and I love its reliability and want a duramax setup with a plow and a dump bed insert for my lawn care business.

[@billdennis2993]

Thx TM for an informative video IMHO after owning an LLY that I put over 170k miles on including having a complete Banks Power up kit. With Speed brake many miles pulling 16k# 5ver TH and running 35 psi boost on stock cooling system witgout head gasket issues. You mentioned an undersized cooling system which is correct but the reason was GM added EGR to the LLY without adding additional cooling capacity. I added an AFE mouthpiece to my turbos inlet and a Banks ram air intake which brought cool air from below the bumper into turbo dropping my CAC temp by 100 deg F when towing. I live in SW with many 100+ ambient day temps and towed up in Sierras past 8k' elevation so just kept EGT below 1300 trans and ect temps near 210 deg F and no issues ran Rotela T6 and changed at 50% of DIC. When I sold truck after 10yrs to buy LML I got 70% of NPP. No issues with my '15 LML DRW at 70k miles including 10k miles towing 18k# 5ver TH. YMMV

[@robertquezada8824]

Spot on with the LML….I own a 2015 and had the fuel pump blowup on me on New Years Eve 2019 leaving me and my family stranded….Guess it was a forecast of what was to come in 2020. I was informed that it would run $12k - $15!! Fortunately I had 500 miles left on my warranty and skated away with $0 out of my pocket. I am unsure of which pump was installed, but being the dealer mechanics and it being under warranty I’m assuming it was the same pump. I looked into installing the new upgraded pump from a non dealer shop and was informed that it would be about $6k…..Thank You for reinforcing what the private shop informed me about the fuel pump……guess I better start saving for the new pump!!

[@blythkd9017]

I've had an LLY and an LML. Both of them were better to me than my L5P debacle. I'm done with stock emission era diesels, GM's anyway. Although I realize the LLY had issues I didn't realize they were severe enough to get it ranked as a generation of Duramax that you wouldn't want. And actually my LML wasn't too bad to me. I had all the junk ripped off of it when I got it to make it usable. After that I towed a lot over the road and had good performance until about a quarter million miles. Then it burnt a hole in a piston. I replaced the piston, installed a new fuel system and got another 90k miles out of it and traded it off for the dreaded 2018. Worst mistake I ever made....period. I think a D'd LML with some forged Mahle pistons and a CP3 would be the bomb! But I know what the video is getting at, which engines are bad out of the box, without spending a ton of time and money on them. They can all be upgraded and made to be solid, except maybe the L5P.

[@40ozdon]

Right on the money my man. Take for an example the 6.0 powerstroke. Sure, they can be upgraded (I.e. studded & EGR delete) to be much better, but we’re talking right off the showroom floor. Everything can be reliable with the right amount of money

[@drewepstein212]

I knew the lly was one of them I personally own one and it is the best thing since sliced bread, never had a problem in 17k miles towing every day keep up the videos love them!

[@themadcatter5849]

Glad I found this. I own an excavation business and pull over 14k daily. Currently have Ram they have been ok, but I have my heart set on a new Denali.

[@sonofabutcher8411]

Juuuust getting into my LML issues.. had the truck for 5 year! Worked every single day except holidays… Been leaking coolant for months now and finally got to the undrivable point.. took to my mechanic and blown head gasket! So we are doing everything. CP3 conversion turbo up pipe injectors head gasket arp head studs the whoooole deal!

[@ng-ht1vx]

Some of the LLY overheating problems can be avoided by regularly disassembling the cooling stack and pressure washing out the rads. I've seen a few that I was looking to buy the truck, and the owner had paperwork for recently doing head gaskets, and you'd look through the rad, and it's like 90-95% blocked. The truck already has a somewhat undersized cooling system, so having it blocked only magnifies the problem. LB7, you forgot to mention erosion under the injector cups issues that present as head gasket problems. I had to redo the job on dad's truck due to that problem. Dad bought Edelbrock heads that eliminated the cups as replacements. The LB7 injector longevity issues can be fixed long term by going to a SAC style injector. I was talking to a diesel shop about the LML pump issues. He told me that the issue was not helped by a lift pump. He said that they sent a bunch of failed pumps for metallurgical testing after they blew up (not just the gm ones, but the Ford ones from the 6.7 as well), and the tests showed that the metal was incorrectly formulated and improperly heat treated. Improper heat treating was causing the wear, which caused the failures. He said that lift pumps and additive didn't seem to have any effect on the problem. But opinions are like buttholes. Everyone has one. Those are just my opinions.

[@chris1451]

Own a real truck, and you won't have to disassemble it to keep it running right, gm guys are so f'd up.

[@ng-ht1vx]

@@chris1451 I've seen every brand of vehicle have that problem. In fact a lot of problems could be avoided in all brands if the rad was more often checked for blockage and cleaned out as necessary. Also, you'll find the AC works better with the rad stack clean. The LLY has a cooling system that the size of it doesn't allow much tolerance for blockage before it becomes under capacity.

[@chris1451]

@@ng-ht1vx "The LLY has a cooling system that the size of it doesn't allow much tolerance for blockage before it becomes under capacity." And that is why I say gm sucks. They don't do anything right. The bean counters still run them.

[@Veikra]

cp4 are just bad pump. Even aside from bad metallurgy such as aluminium cylinders . I made a video explaining how vastly inferior quality that pump is. It's meant to fail

[@n2091m]

All 3 US truck makers run the CP4

[@davidcraft3373]

Just as every other model you compared there are things to be corrected to have a great motor. I corrected the issues on my lml and will put it up against any other Duramax out there.

[@LukewarmMouse]

Yeah, my LML has never been in the shop. Still have the CP4 on it. All I did was install a lift pump and I use fuel additives for extra lubrication.

[@scottsmith6571]

@@LukewarmMouse what fuel Additives did u use ? Can u put atf in the diesel tank for this ?

[@stevebuttars96]

I love my 03 duramax. That being said I've had over heating issues from the day I bought it. The only time it will over heat is when it's over 75 degrees and I'm pulling a hill with a trailer over 10k. A hand full of shops have looked at it and said nothing is wrong. I spent 1000's trying to fix this as I use this truck for everything. I've also done head gaskets and I'm on my third set of injectors. I bought the truck with 110k and many unknown problems and have 250k on it now and have put over 30k into it over the years. But I love it still.

[@johnnylucero586]

I have an 03 dually. Never had that issue until about 4 years ago. I replaced the t-states, water pump and still the same. Finally I pulled the radiator, had it flushed, cleaned and tested. That was my problem. It was dirty. I try to clean it every year but there's only 3/4 inch between A/C condenser and radiator so it's pretty much imposable to clean. Pull it and clean it. I haven't had 1 issue with it since and the needle hasn't gone above the quarter.

[@Fdeubcfhbbjhfd]

You added a cooler? Maybe the temp sensor is bad…

[@jamesb8654]

Just recently Bought my first diesel, 2015 3500HD Denali with 72k at a price I didn’t want to pass up. Thanks for the info on the LML 6.6. Looks like next year will be plenty of upgrades.

[@SlenderSilent]

If you could do a CP4 to CP3 install that would be great. You do your installs from a garage mechanic POV and it makes life so much easier

[@Vanhoozer23]

I should be doing this on my truck soon and will try and get good coverage of everything!

[@garyandersontech]

380000+ on an LLY, owned it since 150000, never had overheating problems, and have not done head studs. Did do injectors and hard lines and turbo inlet. No blowby, no headgasket leaks, and no rust. Does have a lift pump, HSP kit, and other choice mods. If this is the worst, I'd love to see better!!

[@TruckMaster]

Nice 👍

[@605LIFE]

100%

[@kenszorosy2133]

My 06 lly did have over heating issues. Only towing during the summer in the mountains. Usually turning the a/c off remedied it. Also to note my truck has a 6” lift running 37” tires. But pointing out weaknesses is a great thing! My 16 lml I had no idea about the fuel pump issue. I have a 140,+++ miles on it. Now I’m worried lol. Thanks for the info, will be digging into that shortly

[@mechanicjake648]

I have a lb7 and I'm about to do the head gaskets again. My friend at hsp said that the lml head gaskets I put in have had alot of problems. I have put new head gaskets on a few lml trucks and also the fuel systems fail constantly. When they fail its a catastrophe. If you have any problems or want upgrades I highly reccomend hsp diesel. They make all their products in house. Quality stuff.

[@txgrown7610]

Ive got the 2012 LML maybe 2 years ago at 62k miles. Now im just shy of 110k miles working on getting the cp3 conversion kit from HSP very soon. But so far cp4 is holding on, and yes Im running a 165 gph lift pump.

[@justinbrannon4107]

Just a strong suggestion use the lubricity additives and install exergy fuel saver!!..I didn't use additives but had the fuel saver installed and it saved me thousands.

[@motoGPness]

@@justinbrannon4107 so your cp4 failed and the system saver protected everything downstream?

[@matthewgarrett3057]

I have a 05 3500 LLY..bought with bad motor..pulled installed a used one but before I put it in I did new head gaskets and studs..also aftermarket turbo mouthpiece and a welded water pump and all aluminum radiator..I own a small body shop and rebuild wrecks..I use it all the time to haul cars and it does great.. thanks for you videos and thanks for your service ...

[@TruckMaster]

Very cool 👍

[@KooshdaakaaGarage]

I've had my LB7 for almost 4 years now and ole Pig keeps getting better with age! Recently rebuilt the turbo, port& polished it then tossed on a billet aluminum compressor wheel. Afterwards port matched the uppipes and manifolds, replaced driver side with BD full bore. New down pipe. Pulled the heads, performed a mild port & polish on those. Installed LDS 45% over sac injectors. Head gaskets, studs, Bobs your uncle. This pig can now fly :D Thanks for the Duramax content!

[@banjo8879]

I love my 2002 LB7! Had injectors (Lincoln) in it about 57K ago, truck now has over 300K on her and she is still hauling the mail. Had a Hyundai pull out in front of me last year and I refused to let her get totaled. It ripped the engine out of the Hyundai and I only had some sheetmetal and suspension repairs to do.

[@nickhunt2245]

I was nervous coming into this video, then I was relieved and then curious. I just bought my first Duramax and am no longer that big of a fan of Dodge. It's an 08 LMM that's only been deleted and well taken care of (one owner type of thing). And now I'm left hanging... what are the issues with the LMM's? Just did some front end work and need to fix some minor leaks but what should I look for or fix before anything major happens! I'm really digging the videos! I wish I had the bling to keep up with you on your LMM build!

[@andregonzales6305]

Wondering about lmm also didn't mention what was good or bad. Can we get an opinion on the lmm that's what I'm looking to buy.

[@bradarmstrong3952]

I own and enjoy an LLY. Honesty is the best policy, TM, and you are entirely correct about the LLY, but there are a number of things that can be very easily and relatively inexpensively done to mitigate the overheating issue. The S&B mouthpiece (better intake airflow) and Air Dog lift pump (better fuel flow) are just two of them, and should definitely be done as number one and two on the list as TM says. The third most important thing to do I will save for last, since it takes a bit of explaining. Here is a list of other minor fixes that all add up to completely address the remainder of the cooling issue in my opinion: Pull the check ball and spring out the fuel pump (better fuel flow), install an adapter for the large Cat 1R-0750 fuel filters (better fuel flow), if your truck didn't come with the towing package then upgrade your radiator to the heavy duty radiator that comes with that package (better engine cooling), install a "race valve" (prevent injector damage and limp mode), make sure the factory plastic air dams are present both above and below the cooling stack (better engine cooling) as these tend to get disposed of by hurried mechanics over time, and run an Edge tuner and install the "efficiency tune" (remove the lean factory fuel map). Now number three on the list which I mentioned above: cut a rectangular hole in the right side wall of the engine compartment facing the stock air intake and connect the air intake to the resulting hole. I used the nicer silver foil HVAC tape to bridge this gap, but you can use anything that works for you. The reason for this is to ensure you always draw cooler outside air into your intake while moving forward under load. When the engine cooling fan kicks in under a heavy load moving forward it disturbs the smooth airflow under the hood, which unintentionally changes where your intake air is primarily coming from. Instead of the cooling air coming mostly from around the right side headlights and off the right side of the grille opening, it changes to mostly coming from behind the cooling stack (radiator, intercooler, etc.) resulting in a "heat feedback loop" from the intercooler to the engine air intake. Forcing the engine to draw air from inside the right side fender skirting breaks this heat feedback, resulting in getting rid of the runaway overheating that this generation is known for under sustained towing. Some of these fixes are sort of pricey (the Edge tuner and the lift pump), but none are out of reach and all are very easily accomplished on your own in a shadetree mechanic setting. There are a couple of additional ways to reduce warm air into your intake which I can't mention due to reasons I am sure you all know, but I hope this list saves someone else some trouble. Any other ideas or criticisms would be welcomed, even though I am happily getting great service out of my pretty-much stock workhorse.

[@TruckMaster]

Great write up 👍 thanks for sharing

[@bradarmstrong3952]

@@TruckMaster I took the time to do this here because I know all the smart Duramax owners come here for your tips. The Garrett on the LLY is worth all the trouble if you ask me -- all hail the giant snail!

[@paulacallahan6111]

Thank you so much Brad and Truck Master. I bought an LLY last year at 183,000 miles for $10000K for pulling a small horse trailer and did the rust removal and body work this year. Now moving on to the engine and maybe some new shocks. I am not sure if some of these things have been done already but will now look thanks to you guys.

[@mytmousemalibu]

Have an 03' LB7, ive probably had the injectors out or accessed 6-7 times. Mostly chasing fuel leaks. It got 50% ExtrudeHoned injector nozzles pretty fast, porting of some CP3 parts, lift pump, Industrial dual feed line, EFILive, etc. The II dual feed line removes the high pressure relief valve. I've definitely cracked a couple injectors. Ultimately I'd like to swap to LLY heads & injectors. Won't be as bad to work on anymore because the LB7 is going in a non-truck GM vehicle 😉

[@benjaminfierro35]

Truck Master, I own a 2012 GMC 2500HD, I have used it for Hot Shot , 397,542miles , daily driver no issues. I'm now wanting to see about the fuel exploding problem, thank you for the info, I didn't know about that...enjoy all your videos...

[@benjaminhinkle9390]

Having owned LLY, LMM, LML and now LBZ, the LBZ is my favorite, then the LMM followed by the LML and lastly the LLY. Every duramax is badass though.

[@TruckMaster]

Yes I totally agree

[@kernmw10]

You need to drive an L5P.

[@benjaminhinkle9390]

@@kernmw10 I’ve heard they are absolute animals! I’d love to own an L5P one day.

[@kernmw10]

@@benjaminhinkle9390 They are insane. Especially if it's tuned and deleted.

[@jaxsepisodes8286]

I loved my LLY, had 400+ K never tuned and never did Headgaskrts...got lucky I suppose, loving my LBZ now!

[@ethanpendarvis2398]

I have a LLY had it for about a year and still running great. Put a mouthpiece in it and it has made a huge difference. The turbo spools up faster and i’ve seen a minor mpg increase.

[@sten2tall214]

I've got a 04 lb7 with 402000 miles. All original except for transfer case and it's had 3 sets of injectors the last set I put on by myself it took all weekend but it was worth it. The truck runs like new. I've had it for 3 years and was kind of apprehensive about buying it with 380000 miles but I'm glad I did. But definitely get a lift pump especially if you put 3 grand worth of injectors in it. I've got an airdog 95 and it does great.

[@heathmyrick3946]

In my opinion if you do a cp3 conversion on the lml along with a lift pump and full delete it will out last all of the other prior year duramaxes...each is there own...ive had all them besides the lly and the new l5p and the lml is my favorite

[@Allmotorzl1]

My lml with stock cp4 has lasted 286k miles and i know others who have lasted 350k lol

[@turbocharger2639]

Aside from the cp4 literally everything about the truck is better than the previous models. From a fully boxed frames to factory twin disk converters everything is better. Though they are heavier and in turn slower with the same mods.

[@herculesinwyoming]

I guess when I got my 2005 new I made the right choice at the time for me. The 8100 gas has treated me well. I only put 81,000 miles on it so far so a diesel wasn't in order at the time.

[@justnsaliga8518]

the 8100 gas will outtow just bout anything its a beast, i still love my 6.0 powerstroke tho.

[@ba337]

You are spot on regarding the LML. My pump failed at 82,000 miles while on a road trip. Took Hennessy GMC 3 MONTHS to repair it. Warranty covered the $10,376 tab.

[@TruckMaster]

That’s a hefty bill wow!

[@thatslow6.0v]

super helpful man!! been watching u for a long time now u have great information on literally everything! keep up the great work hopefully one day will meet ya!

[@zlspears11]

I've got a LML and I absolutely love it

[@chuck1585]

253,000 miles on my ol 04.5 LLY and still running strong. Only issue I’ve had with it is couldn’t keep a transfer case in it. 3 in a years time. Other then that it’s done everything I’ve asked of it and more

[@bradarmstrong3952]

See my comment that I just posted above and you should be able to enjoy your LLY far into the future -- mine is happy with even more miles and lots of heavy towing -- all hail the giant snail!

[@chuck1585]

@@bradarmstrong3952 I did the S&B within a month of buying my LLY. Haven’t done a lift pump yet, but on the radar to do. Interesting on the intake/air box stuff, I’m going to have to look into it further. My big obstacle currently is my ECT’s and IAT’s, especially when towing. I do know one of the biggest contributors to my high temps is the fact I need to pull the entire cooling stack and clean it. Highest I’ve seen my ECT’s was 230, on a 99 degree day pulling a long hill (8 miles) with 8,000 lbs behind me. Had a little hold my breath moment before I hit a downhill and was able to get it cooled down moments later. Far as I know, my truck is still running stock head gaskets, so it definitely had me concerned. Other than that, my truck has been a solid unit that does everything I ask it to!

[@bradarmstrong3952]

@@chuck1585 they are solid for sure - I love my 04.5. Watch your IAT on the next grade like you talked about and listen for the roar of the engine cooling fan. You’ll likely see a jump in IAT right after you hear the fan. That is the telltale for the issue I described. Besides, it is super reassuring when I am on level ground at steady speeds and can watch the IAT drop to within a few degrees of the outside air temp reported by the computer in my rearview display. I can mentally do the subtraction between these two and single digits are typical while on the move. The only time my IAT climbs now is at a complete stop, and it doesn’t get nearly so far as it used to. Take good care of that truck, and she’ll take good care of you!

[@chuck1585]

@@bradarmstrong3952 3 years and 50,000 miles in with her. Bought it with 203,000 on it, complete paw paw truck when I got it, and it’s been great! That particular grade I was going up if I recall my IAT’s were around the 185 range, I wasn’t too focused on those as I was watching ECT’s and trans temps. Trans got a little toasty, 215, but again, pulling a grade 99 degree day, I expect my trans temps to be a little higher than normal.

[@bradarmstrong3952]

@@chuck1585 sounds nice!

[@davidmedlin50]

Good video so true on the lly, I have owed 2 of them and wish I could have known what I was getting into, I think biggest issue was cooling, once I blew head gasket at up pipes I did a lot of research and a lot of work. I did replace head gasket by myself. I own a lmm now and it is stock with lift pump, looking to do some upgrades, just do research so I get what I want. Thanks for the good info

[@taylordoran920]

I got screwed over on an 05 lly with blown head gaskets but after it was fixed I couldn't be happier, and my cousin that did it took 4 thousands off so im up lots of compression, still haven't blown any gaskets yet but let's just stay positive lol and a big thanks for all ur vids.

[@TruckMaster]

👍👍

[@01blaster200]

Amazing video. Just got an lb7 and came across this vid let’s see how it goes for me 🙏🙏😂

[@noneyabizz8056]

Still love my LLY did the head gaskits and studs myself when I got itwith .aluminum rad and elbow no overheat isues even towing in the florida heat.your spot on for sure about all of it...and I swear by the gray bottle diesel kleen has been used from new,over 350000 uses no oil and fuel injection system all original...But dont get me started on the ford 6.0 with the 6spd it got better mileage but was always 1 hard ride from a break down.lost my ass on that truck

[@bullofthewoods9374]

me as well i have not done gaskets cause i have never over heated 183k and pull in the mountains of nc and the beach never goes over 200 and when i stop it drops back down to 190. dont see wht the issues are these guys are talking about.i did do the intake tube and it does run cooler than before. but it never has went about 200. unless its upper 80s it runs around 185 190 so is just dont see it.

[@billb8862]

Love my LLY! First thing I did when purchased it was the turbo inlet and intake! No overheating issues yet I run it on a simple eco tune and love the truck!

[@grahamwatson3677]

I feel much better with my 13 lml after a cp3 conversion and a weight loss program. It's such a pleasure to own now. Up pipes and a down pipe are on the way

[@kaboom362]

I've always wanted a 2500 HD with the Duramax. I really appreciate you explaining the concerns with them over time. I was thinking about getting a 2017 Full Size Cab and Full Size Box for my retirement. Keeping it stock unless there are advantages to upgrade a thing or two. What do you guys think?

[@thartanian]

It'll put hair on your chest

[@Camo-Dan]

@@thartanian😂

[@fram79]

3 minute mark, I'm guessing the LML, largely because of the CP4 pump.

[@walleye855]

Thank you very much for honesty. I trust your experience and am impressed. I have a 2011 LML and will be taking your advice and am phoning around RIGHT NOW. 100000 miles now and only used fuel additives a couple of times. Some people say that the lub in the fuel is sufficient enough. I don't think so now. Should I always use fuel additives? Thank you once again, Jim Concerned Duramax owner.