What's The Perfect Exhaust For The Harley M8 ?

[@whatchumeanwillis9503]

I’m running a Stainless Steel Sawicki pipe on my Lowrider ST. Absolute music to my ears 🇺🇸🇺🇸

[@myride7216]

Did you get a cam and tuner?

[@whatchumeanwillis9503]

@@myride7216 yea I did. I got the 475 s&s cam, 64mm TB, 5.5 injectors and dyno tune with power vision.

[@HD-on2eg]

I have the Bassani super bike pipe on mine. The look is perfect on the bike. Loud when you grab the throttle, not too loud at idle and cruising. Has a nice deep, unique sound to it. Full heat shields too.

[@HOLYSHIFT]

Thanks buddy- can’t wait to install mine

[@brandonmacon3317]

A unique sound? They sound good but have become more of a mainstream sound. Nothing unique about something everyone else has

[@Roadglide117]

I've had Basani stuff before, good product! Your bike is gonna sound great. Look forward to hearing the 3030 cam!

[@HD-on2eg]

A quick tip when installing the Bassani SBP. Get the header on then check that the bag fits and locks on properly. If you can’t get the bags to fit right then adjust the bracket that holds the exhaust to the frame. The bracket has one elongated screw hole to give you some adjustment. Saves a lot of time to check the bag fit before you install the muffler.

[@jamesdunn3508]

Can't wait to see what it sounds and looks like. And most important the power 😈

[@tommiller8714]

Always enjoy your videos; humorous & entertaining. Wait times on some products are ridiculous to say the least. Bassani has very good exhaust products. I've used their catless Headpipe on a 2016 Street Glide Special, 103 Twin-cam (stock engine, hi-flow air cleaner & slip-on's) that I auto-tuned with the V&H tuner about 6 years ago and worked fine. My current 2023 RG-ST (and previous 2021 RGS) I've run the S&S 2-1 Sidewinder Exhaust [catalyst equipped on the 2021 (w/Stage-2 S&S 465 cam) and Race version (catless) on my 2023 (plan to go Stage-2 with possibly the Redshift 472 cam soon]...both worked very well. The fit & finish are spot-on, performance excellent, tunable (several baffle options) and look excellent (and hold up over time). The Thunderheader performs well but from what I've seen on some bikes, appear to corrode, rust out prematurely. Lots of Dynas and Softails run these out here on the west coast. Not sure if it was owner neglecting maintenance (proper periodic cleaning) or low quality materials and/or processes? Once a LR-ST has a 2-1 pipe on it (versus the OE 2-2), it would be nice if a replacement right side bag was available that is the same size as the left side bag. If a company (including HD) were to do this, I'm sure they would sell a lot of them, as I'm seeing a lot of Low Rider ST's sporting 2-1 exhausts. Ride safe!

[@joe6223]

Bin useing Bassani for over 15 years true dauls great sound and performance

[@zoa900x]

I’ve just installed the bassani radial sweepers, and man!!

[@atimic]

136 Tq and 126 HP on my Low Rider ST with a Star 30/30 and Rinehart slip-on's.

[@thakery5720]

I had a Supertrap 2 into 1 on an old Sportster (1990 model)back in about 1998 which was second hand and needed polishing. Looked real good but the bike was an 883 bored to 1200 and the heads wouldn't breath enough air so I couldn't tell if it made a difference. With that experience in mind I'd looked at two into ones again and was amaized at the prices.... then I found a used - slightly scratched but not damaged - Red Thunder pipe for my 2010 Dyna Streetbob which is now 113 inch with a welded crank and a reworked CVO topend which goes well. It is over £1650 English Pounds new but came to me albeit with a few scratchesin the Ceracote black paint for the price of £350 off ebay ! We'll see if it works and if so then I'll polish the paint off it, if not I'll sell it on.

[@shanehazelton8754]

That st looks so good in gunship grey I have same bike but in black!!! I was going back and forth between the bassani superbike and the new fuel moto contender pipe Ultimately, I went with the contender And it looks amazing in stainless

[@howardbuckley3430]

We need to see proof, please?

[@Jtdubbzz]

I have a 22fxlrs in gunship. Was highly considering the Bassani SP but went with V&H competition high output in black and couldn’t be happier. Sounds very unique.. has a low bass tone with a throaty rip. I don’t see many of them either which is pretty cool

[@i.j.aragon6946]

Bassani Gang 🤘

[@1962egl]

Get the fuel moto rtx two into one. They stainless, in stock and out perform every pipe on the market. And less expensive than just about anything else.

[@victorgonza4528]

Riding season begins in full swing soon , good one Sandy .

[@JoeGoeMotorcycleAdventures]

Man 24 weeks is an insane wait time! The bassanis should sound good. That was some sick air that John caught 🤣🤣

[@throttleandgrind]

Bassani road rage mercury. Not long, but sounds amazing. Looks amazing too.

[@CarolinaLowrider]

The Lowrider S just looks so damn much better without the bags on it! The Luggage on the back makes those bikes look like two wheel Minivans!

[@HOLYSHIFT]

😜😆 minivans

[@BikesBeardsAndBrews]

I believe I can flyyyyyyyy, I believe I can touch the skyyyyyy lol. D&D make some really awesome pipes for sure!

[@johnsironi631]

Big John is going to eat your dust

[@btoso32]

thats the exhaust im going for i think too. had my eye on it for a few months now.

[@bryanpeterson2150]

I always wonder what the neighbors are thinking when you guys are talking about the bikes when no one else is around lol.

[@purpleheartvet24]

Fuel moto makes a great pipe too

[@HOLYSHIFT]

I’ve seen that ! 👍🏻

[@MikeyohMikey]

Just Installed a stainless Sawicki Shorty on my Low RIder S. Sounds insane!

[@HOLYSHIFT]

Nice!!👊🏻

[@1490cameronglen]

Why didn't you go with a Sawicki, it would meet all of your requirements

[@johnsironi631]

Sandy I have a 22 rg gunship gray all blk out I put chrome exhaust on it looks really good

[@wyattharris5754]

Trask performance 2 into 1 is what I’m running. It’s awesome. Blockhead did a comparison vs HPI. It want off by too much

[@HOLYSHIFT]

I saw that review with the HPI. Somewhat disappointing numbers from the HPI

[@i.j.aragon6946]

@@HOLYSHIFT all that money for HPI smh

[@giovannitoledo7885]

Did you ever consider Noon Performance? They're in Orchard Park, NY. The lead time might be a bit further out than what you wanted.

[@jessedemayo4883]

As we say it’s either Bassani or bologna you choose

[@HOLYSHIFT]

🤣

[@Chumbucketsecret]

Almost forgot to enter the raffle, grabbed my tickets just now! Hoping to get that tour pack 💯

[@HOLYSHIFT]

Thanks buddy- good luck

[@royatorrice9109]

I went with the super trap bootlegger 2 in to 1 , looks great and sounds great 👍

[@HOLYSHIFT]

Nice 👍

[@CGB65]

Thanks for the tour through Newark, although I think the roads would eat bikes and riders for falafel filling 🥧. Will stay tuned for the cam and muff unveiling. All you buds should to do a big cam crew video. Please.

[@MichaelSchneider-f6q]

Hello, can you tell me which helmet the driver of the StreetGlide has

[@lloydsuddreth5343]

Bassani Road Rage pipe. Makes great power. Like my dyno guy says, the dyno doesn’t lie.

[@philvale5724]

Hi 👋, I am new to your ride out, In pursuit of madness 😂 sorry Loudness 😂 , it looks like your roads are as bad as they are the UK , I pasted my test when I was 17 back in 1967, I have had a lot British bikes, in the early 90s I had a mid life experience it started with a HD1200s , FXE 1340 , I spent a lot lot of money on that , then in 1999, I purchases my new DEUCE 1445 , then spent a L L L LOT more on it , 1550 , cams , 45m Mikuni , and ignition system , 2-1 D-D Boom Can , this was loud, with a lot of power, on my R plate was the words, LOUD AND PROUD, AND I was , I have been on a lot of European HOG RALLIES , if you like a can send to you some pics, I have even met Willie G , and have got all their Autographs, 2002/3 Barcelona, sadly I had to sell my bike in 2019 do to my ex female partner, as she has scammed me for 100s £ , over the last 17/18 years of have been Building and restoring 2 properties 1 in Uk and 1 in France, and that is were I am now living, I am hoping to get another bike later in the year, I am now only about 2/3 hr from Spain , and the Alps , some of my trips were around 4000 mills,, with 21 to 27 other Bikes, sorry I have gone on to long chatting, I am now in my 70s , I hope you have got your pipes sorted out now, DD are a great pipe, Ride Safe and Flight ✈️, PHIL FROM THE DARK SIDE OF THE MOULIN FRANCE.

[@brandonsmith3542]

Always go with the 475 cam

[@JimHalo784]

good video, you might want to call BLOCKHEAD because I think the have an extra HPI pipe for sell.

[@josephgoias2945]

You have to love route 21. Next time you need to bring an ADV bike. 😂😂

[@anthonypenna5961]

Rhineheart or S&S race only or D&D 2-1 pipe most likely best performance

[@Roaddawg68]

I have a thunderheadwr on my 2011 Dyna street bob, pipe is almost 4 years old no pitting at all maybe that one was defective or people riding with salt on the roads , cant beat it for power on thr Dyno. 12:40

[@DUSTY88]

Whate the loudest exhaust you can get for the ST?

[@joesainato8051]

Go 30/30 I wish it was out when I did mine

[@kevinf7016]

Really wanting a 2 into 1 that doesn't have clearance issues when running a wideband o2 sensor. Any thoughts on this?

[@HOLYSHIFT]

No knowledge about that

[@dennisthemenace5150]

Wait for the best

[@nickydonuts1]

I have a Pisani had a pipe crack and they stood by it and send me a new one good company

[@HOLYSHIFT]

Yeah I agree . Can’t wait for the install

[@sammyvices2547]

What vest are you rocking? If you don’t mind me asking it’s nice

[@HOLYSHIFT]

Please subscribe

[@streetglideboy412]

Thank god you are not getting a Krome Werks. We are all sick of hearing John brag about how amazing his pipe is. Your bike looks cool without the bags.

[@JohnBraman413]

doesn't s&s make a 2-1 exhaust?

[@gingernaut2550]

I bought bassani radial sweepers for my yamaha. look great, sound beter. 4 months after instill, tons of surface rust. their website says they only warrantee coating for 90 days.....disappointed.

[@newenglandbiker2220]

What made it a no fly zone for John. Good luck with new cam and the pipes.

[@HOLYSHIFT]

It’s near the Newark airport

[@griffhance5904]

Blockhead’s KZbin channel recently had several exhaust they installed and dyno tested was very interested

[@Donfleebie1]

John says he has the perfect exhaust. Why not go with that, and a baffle. Nevermind. Try a Thunderheader. Nevermind again.

[@ericroadking7564]

Sandy great video!!! You will like the Bassani they make a great product!! Bike look great ! Hey what kind of levers brake and clutch are on you ST? Peace!!

[@HOLYSHIFT]

Thanks Eric. I have an Advanblack prototype set of levers- still not on sale yet .

[@ericroadking7564]

@@HOLYSHIFT I knew they were different !! Peace brother!!

[@robertfagan8833]

Bassani makes a beautiful exaust.. can’t wait to see the cam and dyno numbers on that beautiful bike. Sandy are you going to be around for the meet and greet?

[@HOLYSHIFT]

Yes sir ! April 29th Bergen HD

[@robertfagan8833]

Awesome

[@paulgrogan8032]

Anchor's away shipmate. Fucking 1 in a million⚓️

[@edwinbrown3303]

Good romp fun time

[@aspen9062]

My ST won’t be in until the end of April…anyone had any experience with a Vance and Hines Hi Output 2 into 1 stainless steel?

[@HOLYSHIFT]

I had a Vance & Hines 2-1 Crome on my 2020 Electra Glide . I loved the sound! I don’t know if they make stainless steel

[@aspen9062]

@@HOLYSHIFT they do! My attraction to that pipe is the same as yours. Raw stainless, visible welds and aged to a light bronze. The ST screams it…thanks Sandy!

[@joesainato8051]

Might want to make sure it’s not carb compliant. V&H just went that way

[@aspen9062]

@@joesainato8051 I only do NON-CALI compliant. If it’s a cancer risk I’m in.

[@JimmiCrackdKorn]

Sawicki Speed sounds great and performs excellently. Check out video, Just Ride,dude is running Sawicki and 475, explosive. I'm running 30/30 and waiting on Sawicki medium length.Your bike is awesome,mine is '22 black. You'll torch the dresser unless it's really hot. Wind resistance and weight kill them. My '92 Electric Glide is slated for some torquey cubic inches this winter. Ride safe 👋💀👍

[@toolmaker5150]

Thunderheader’s are a great pipe performance wise. I’ve run them for years on Shovel’s, evo’s, twin cams and now my M8. Imo, they have always been known for mediocre quality. Mainly poor welds, thin tubing and poor finishes. I currently have 5k on the black one on my ‘21 FXLRS. It still looks good. Eventually I will have it cerekoted and possibly ditch the fugly heat shields. Thats a extra $350 expense that should be provided from the manufacturer for the price they charge.

[@John_shepard]

They have no need to do anything. The pipes will sell themselves. If people stopped buying them maybe then!

[@felixmontanez4855]

Thunderheader exhaust

[@d4v3o57]

Have you seen blockheads recent video? tittled " BEST Exhaust For Your Harley-Davidson Milwaukee 8? (Pt. 3)" The Sawicki exhaust might be something that interests you. they also have stock ready to go

[@HOLYSHIFT]

Thanks 😊 - the Sawicki pipe is already on its way to my house in the mail….😂🤣LoL 🤪😂

[@d4v3o57]

@@HOLYSHIFT haha excellent! pick up my new 23 lowrider S next week and have been watching endless videos around them since! hence finding ur channel. I'll sub for future content and see how you go with the sawicki, getting the tbr comp fitted to mine pre delivery

[@d4v3o57]

Hi again mate, seen an earlier video of your's on the tab performance slip ons, do you still have these and interested in selling?

[@dbro1563]

Bassani Road rage

[@HOLYSHIFT]

Bassani Super Bike is the road rage with a slightly different Muffler

[@davidshlomof5703]

When you install the Bassani, and a good tuner on that 117 you will smoke his bike!

[@HOLYSHIFT]

Power vision custom tune ! Bye bye Mad Max 🤚🏻🤚🏻🤚🏻

[@HD-on2eg]

That’s exactly what I have. It’s fast!

[@johnsironi631]

Sandy cam it up the bike is going scream

[@pachy44]

Thrashin.....

[@davemeshamsr6000]

What r u butchers?

[@HOLYSHIFT]

👍🏻 😆 LOL 👍🏻 looks like it ….🤣😂

[@lloydsuddreth5343]

With that 30/30 cam you should make 130hp and 130tq minimum

[@HOLYSHIFT]

I believe this will be the numbers

[@darrenwolfe378]

On which bike?